2021 Hyundai Santa Fe Hybrid
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Hyundai › Santa Fe Hybrid › 2021
These records cover every 2021 Hyundai Santa Fe Hybrid. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2021 Hyundai Santa Fe Hybrid. Newest first.
Hyundai Motor America (Hyundai) is recalling certain 2021-2022 Santa Fe, Santa Fe HEV, Elantra, Elantra HEV and 2022 Elantra N and Santa Fe PHEV vehicles. Due to a damaged printed circuit board, the rearview camera image may fail to display. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111…
Risk and remedy
Risk
A rearview image that does not display reduces the driver's visibility and increases the risk of a crash.
Remedy
Dealers will replace the rearview camera, free of charge. Owner notification letters were mailed January 14, 2025. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 271.
Hyundai Motor America (Hyundai) is recalling certain 2019-2023 Santa Fe, 2021-2023 Santa Fe HEV, 2022-2023 Santa Fe Plug-in HEV and Santa Cruz vehicles potentially equipped with a tow hitch harness installed as original equipment, or purchased as an accessory through a Hyundai dealership. Water accumulation on the tow hitch harness module printed circuit…
Risk and remedy
Risk
A fire while parked or driving can increase the risk of injury.
Remedy
Owners are advised to park their vehicles outside and away from structures until the remedy is completed. Dealers will install a new fuse and wire extension kit as necessary, free of charge. Owner notification letters were mailed starting May 16, 2023. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 244. This recall is an expansion of previous recall number 22V-633.
Hyundai Motor America (Hyundai) is recalling certain 2023 Genesis G80 Electric, 2021-2022 Santa Fe Hybrid, and 2022-2023 Santa Fe Plug-In Hybrid vehicles. In the event of a crash, the front driver-side and/or passenger-side seat belt pretensioners may explode upon deployment.
Risk and remedy
Risk
An exploding seat belt pretensioner can project metal fragments into the vehicle, strike vehicle occupants, and result in injury.
Remedy
Dealers will secure the seat belt pretensioners with a cap, free of charge. Owner notification letters were mailed December 14, 2022. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 238/011G. This recall is an expansion of recall numbers 22V-354 and 22V-458.
Owner complaints
20 complaints
What owners report most
Latest complaints
- Engine and engine cooling › Engine › Crank/camshaft position sensor
The contact owns a 2021 Hyundai Santa Fe. The contact stated while driving 50 MPH, the vehicle failed to respond while the accelerator pedal was depressed. The vehicle was taken to a local dealer where it was diagnosed that the camshaft sensor needed to be replaced. In addition, the vehicle was…
The contact owns a 2021 Hyundai Santa Fe. The contact stated while driving 50 MPH, the vehicle failed to respond while the accelerator pedal was depressed. The vehicle was taken to a local dealer where it was diagnosed that the camshaft sensor needed to be replaced. In addition, the vehicle was repaired several times however, the failure persisted. The check engine warning light was illuminated. The contact stated that the vehicle lost motive power while driving at various speeds. The vehicle was taken to another local dealer to be diagnosed; however, the cause of the failure was not yet determined. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 32,000.
- Engine · Power train
The contact owns a 2021 Hyundai Santa Fe Hybrid. The contact stated that while driving at various speeds, the vehicle lost motive power. The contact was able to restart the vehicle; however, the vehicle failed to exceed 40 MPH. The contact stated that the failure reoccurred several times while…
The contact owns a 2021 Hyundai Santa Fe Hybrid. The contact stated that while driving at various speeds, the vehicle lost motive power. The contact was able to restart the vehicle; however, the vehicle failed to exceed 40 MPH. The contact stated that the failure reoccurred several times while driving. The contact stated that on several occasions, the vehicle lost motive power. A message indicating that there was no power was displayed, and the check engine warning light was illuminated. Additionally, a red Hybrid warning light with a stop safely message was displayed. The contact stated that the Hyundai App displayed the Power Train and Chassis indicated the contact needed to schedule a service. The vehicle was towed to the dealer, where it was diagnosed and determined the vehicle had either bad fuel or the vehicle was refueled while the engine was running. Additionally, the gas cap was left open. The contact stated that the failure persisted, and the vehicle was taken to the dealer several times. The dealer replaced the rocker cover gasket and oil gasket to resolve a leak. The vehicle was at the local dealer awaiting Field Technical Engineer inspection. The vehicle was not included in NHTSA Campaign Number 22V746000 (Power Train). The manufacturer was made aware of the failure, and a case was opened. The approximate failure mileage was 31,000.
- Engine
The contact owns a 2021 Hyundai Santa Fe. The contact stated that while driving at various speeds, the vehicle suddenly lost motive power and stalled. The contact was able restart the vehicle; however, the vehicle failed to exceed 30 MPH. The contact stated that the failure reoccurred several times…
The contact owns a 2021 Hyundai Santa Fe. The contact stated that while driving at various speeds, the vehicle suddenly lost motive power and stalled. The contact was able restart the vehicle; however, the vehicle failed to exceed 30 MPH. The contact stated that the failure reoccurred several times while driving. The contact stated that on several occasions, the vehicle failed to restart, and the vehicle was towed. A message indicating that there was no power was displayed, and the check engine warning light was illuminated. The vehicle was taken to the dealer, where it was diagnosed and determined that the intake valve had failed. Additionally, an unknown recall repair was performed on the vehicle. The contact stated that the failure persisted, and the vehicle was taken to the dealer several times. The dealer was unable to determine the cause of the failure. The vehicle was not repaired. The manufacturer was made aware of the failure, and a case was opened. The approximate failure mileage was 25,000.
- Power train
I have been taking my 21 Santa Fe hybrid limited into the dealership for a year and a half for the same code . Powertrain code P040B00, and to this day they can not repair this issue. I looked it up and a ton of us are having issues with this same code. It should be investigated, and customers should be warned. Hyundai needs to recall these vehicles or provide a solution. A year and a half is unacceptable
- Engine · Forward collision avoidance › Warnings · Fuel/propulsion system
While driving 80 mph down the highway my brand new vehicle shut off completely, the entire car lost power. In another instance I was going around a roundabout and my acceleration completely went out, my son was in the back seat and another car had to jump the curb to avoid crashing into us. I met a…
While driving 80 mph down the highway my brand new vehicle shut off completely, the entire car lost power. In another instance I was going around a roundabout and my acceleration completely went out, my son was in the back seat and another car had to jump the curb to avoid crashing into us. I met a woman in the dealership who has been waiting over a year for her recalled tow hitch to be fixed. When it rains or snows the forward safety systems shut off and the alert repeats extremely distracting on your dash, like sounds, red flashing lights, over and over again. You have to constantly hit the ok button while driving to get it to go away.
- Electrical system · Engine · Unknown or other
From what I have been told there is no recall on this issue. Purchased a Hyundai Sante Fe Hybrid 2021 brand new in 2021. I live in La Quinta California summers are especially hot. Temps can be anywhere from 105 to 120 . Only had the car for 6months when in light came on saying Inverter needs…
From what I have been told there is no recall on this issue. Purchased a Hyundai Sante Fe Hybrid 2021 brand new in 2021. I live in La Quinta California summers are especially hot. Temps can be anywhere from 105 to 120 . Only had the car for 6months when in light came on saying Inverter needs coolant this has been a problem for the past 2yrs. Checked with Hyundai Service department my coolant is fine air conditioning works well. This not a safety issue but should be fixed and Hyundai is doing nothing about it. Many complaints have been ignored.
- Engine · Unknown or other
Whenever the weather gets above 80 degrees outside my car put a notice to refill inverter coolant, when everything is filled max line. I’ve mentioned it twice to the Hyundai service and both times the employee told me not to worry about it and it is a sensor issue. That is unacceptable, I live in…
Whenever the weather gets above 80 degrees outside my car put a notice to refill inverter coolant, when everything is filled max line. I’ve mentioned it twice to the Hyundai service and both times the employee told me not to worry about it and it is a sensor issue. That is unacceptable, I live in Las Vegas, Nevada where temperatures on average in summer are 90+. That’s a big risk an unnecessary danger to have my car engine over heat and stop in the middle of no where and potentially leave me stranded or worse cause an accident or fire. On top of that I have to see the message every day in the summer temperatures, without any way to remove the message. This will be the 2nd summer I’ve seen this message appear in my car, and I’m tired of the dealership & their car service staff telling me this is nothing to worry about… especially on car not even 4 years old!
- Power train
When turning at low speeds especially sharp turns and accelerating, a cracking sound occurs.
- Power train
Gas pedal stops working while driving down the road. Happened 3 times. Will work again after awhile. Dealership can't find what's wrong with it and so hyundai and the dealership said they can't fix it.
- Unknown or other
On December 28, 2022, we were driving 70 miles per hour on Route 75 in the third lane of a four-lane highway from Michigan to Tennessee. In Ohio, the vehicle lost all drive power without warning. As it decelerated, we were able to maneuver the vehicle to the breakdown lane, narrowly avoiding other…
On December 28, 2022, we were driving 70 miles per hour on Route 75 in the third lane of a four-lane highway from Michigan to Tennessee. In Ohio, the vehicle lost all drive power without warning. As it decelerated, we were able to maneuver the vehicle to the breakdown lane, narrowly avoiding other vehicles around us driving at 70 miles per hour. We do not know what caused this to happen. After several hours on the side of the highway, the vehicle was towed to Jeff Wyler Hyundai in Fairfield, Ohio. They have not been able to diagnose the problem as of today. The contact stated that the cause of the issue was due to an oil plug that was improperly tightened by the dealership during service maintenance. As a result of that, the oil was able to drain out and cause the engine to fail.
- Seat belts
The contact owns a 2021 Hyundai Santa Fe. The contact received notification of NHTSA Campaign Number: 22V816000 (Seat Belts) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The…
The contact owns a 2021 Hyundai Santa Fe. The contact received notification of NHTSA Campaign Number: 22V816000 (Seat Belts) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The driver's side seat belt failed to extend smoothly. The contact stated that occasionally the seat belt became stuck and excessive force was needed to operate the seat belt. The manufacturer was not made aware of the failure. The approximate failure mileage was 26,000. Parts distribution disconnect.
- Back over prevention › Rearview system braking · Electrical system · Lane departure › Warning
Having issues with the dash going completely black; so you can not see any instruments on the dash panel or the head unit (navigation/radio/airplay). The car has been into the shop three times so far with no resolution. The newest issue; the horn doesn't work, the safety features such as lane…
Having issues with the dash going completely black; so you can not see any instruments on the dash panel or the head unit (navigation/radio/airplay). The car has been into the shop three times so far with no resolution. The newest issue; the horn doesn't work, the safety features such as lane assist, lane departure etc. only work intermittently, and I have had the brakes slam on for no reason. The last time I took the car back to dealer and told them I was afraid to drive the car, the service manager changed the settings on the safety features, not sure how that was to fix anything? We have been so close to being rear-ended because of the faulty braking system. The electrical system is having major issues, I have videos of the car doing all these things and have showed them to the dealership and they claim they can not fix the car because it doesn't happen when they drive the car.
- Engine · Power train · Vehicle speed control
While driving on the highway, when I pushed on gas pedal the car would not accelerate, I was uncertain if I was losing power of the vehicle, luckily it maintained the current speed and did not decelerate,but I was unsure at the moment if I was losing complete power, because it wasn't responding, it…
While driving on the highway, when I pushed on gas pedal the car would not accelerate, I was uncertain if I was losing power of the vehicle, luckily it maintained the current speed and did not decelerate,but I was unsure at the moment if I was losing complete power, because it wasn't responding, it felt like the car was going to stall similar to when you run out of fuel. This occured for around 20 seconds, i would guess, long enough to notice that the car was not responding and continued to not respond,and to be concerned from a safety perspective. The night before I had filled the fuel tank and I noticed to guage that predicts fuel mileage kept changing by 3-5 miles difference,back and forth repeatedly, before I even left the fueling station and as I continued to drive. I'm unsure if that is related to the driving performance issue of not accelerating the next day. The next morning when the non acceleration occurred the predicted fuel mileage was consistent. The next time I drove the vehicle following the non accelerating issue, there was an error that popped up on my digital dash stating "A possible condition with your engine control system has been detected. A full system check is recommended to be done when convenient. Please contact your local dealership to schedule an appointment." Also, the check engine light came on. MyHyundai app showed a DTC - P040B00, DTC system - powertrain, DTC sub system- EMS. I took the vehicle to the Hyundai dealership to confirm that the car was safe to drive or if I should rent a car until it can be further inspected. They read the codes and said it is safe to drive and no additional information, I will be taking the car back to the dealership in a week, which is their first available appointment with a hybrid certified technician. Both the dealership and Hyundai corporate customer service states there are no current recalls, but through other car forums, it appears to be a similar issue that has occurred with other Hyundai models.
- Unknown or other
Refill inverter coolant comes up on my dash daily. I have taken the vehicle back to the dealership several times to get that serviced. After having the vehicle all day they tell me everything is running fine and they can’t find the problem or figure out why the message is coming up. This has been…
Refill inverter coolant comes up on my dash daily. I have taken the vehicle back to the dealership several times to get that serviced. After having the vehicle all day they tell me everything is running fine and they can’t find the problem or figure out why the message is coming up. This has been going on since I bought the vehicle in April. They assure me the vehicle is safe to drive and this won’t affect the vehicle in any way. This problem has not been resolved and I’m afraid serious damage will happen if this message keeps coming up and they don’t get it fixed.
- Engine · Fuel/propulsion system · Power train
While traveling 70 mph the vehicle had a sudden loss of engine and battery output performance while driving and began losing speed despite the accelerator being fully depressed. There was a very rapid decrease in speed, and no warning chime activated per manual. “Check Hybrid System. Stop Safely…
While traveling 70 mph the vehicle had a sudden loss of engine and battery output performance while driving and began losing speed despite the accelerator being fully depressed. There was a very rapid decrease in speed, and no warning chime activated per manual. “Check Hybrid System. Stop Safely, triangle warning displayed.” Observed battery indicator rapidly deflecting left and right. The vehicle would not accelerate and had to be coasted through four lanes of traffic to get to the shoulder of the highway. While on an SOS call with Bluelink, who was unable to see the location of my vehicle, Oil Light illuminated, and a message on the dash said “Check Battery Discharge.” After the first Bluelink Operator was unable to assist in dispatching a tow truck due to the inability to see the vehicle’s exact location, the second Bluelink Operator was able to assist and dispatch a tow truck to the location and tow the vehicle to the closest dealership. The vehicle could not be turned on or placed in neutral. Was given a jump start to place in neutral to tow. Upon arrival at the dealership, the key fob would not register inside the vehicle for the service manager and technician to move with the tow truck operator. The vehicle was evaluated by the dealership and the only reported issue was a signal error that was present when the vehicle arrived at the dealership after being towed. Dealership reported radar was not vertical and contributed that to the cause of loss of acceleration on the highway despite not having identified it before or being a result of being towed. I requested this be reported if truly the cause since that could be catastrophic. The matter was considered resolved by the dealer since it couldn’t be duplicated. This unknown, continued sudden loss of output power, acceleration, and electrical power is a Serious Safety Defect and significant impairment to the vehicle, posing a fatal risk for the operator and other motorists on the road. Occurred at 24618 miles.
- Engine · Fuel/propulsion system · Power train
While I was traveling 70-75 mph the vehicle had a sudden loss of engine and battery output performance and I began losing speed. There was a very rapid decrease in speed, and no warning chime activated per manual. “Check Hybrid System. Stop Safely, triangle warning displayed.” The vehicle would not…
While I was traveling 70-75 mph the vehicle had a sudden loss of engine and battery output performance and I began losing speed. There was a very rapid decrease in speed, and no warning chime activated per manual. “Check Hybrid System. Stop Safely, triangle warning displayed.” The vehicle would not accelerate despite pressing the gas pedal all the way to the floor and had to be coasted off the interstate through three lanes of traffic to get to the shoulder. No fault indications were present in the Bluelink app despite warnings present on the dash. Mileage was 6506 at the occurrence, vehicle was in Smart. Adaptive Cruise Control and Lane Keep Assist were being utilized, when disabled acceleration did not return. I was advised to turn off the car and turn it back on due to no faults present via remote troubleshooting tools and no dealership within 150 miles, and the vehicle resumed operating okay. After taking it for service at the next available “emergency slot” two weeks later at my local dealership and the car being there for one week, they reported condition could not be duplicated, the vehicle is operating to the manufacturer's specifications. I noted my serious concerns and that a serious safety defect that allows a vehicle to lose all acceleration on the highway and the vehicle not sounding a warning chime can lead to dangerous scenarios on the road and I was assured there was nothing wrong with my vehicle and it would not occur again as it was operating within manufacturer specifications. The vehicle did have a subsequent failure of this same type at a later date. It was not investigated by anyone other dealership. The manufacturer failed to address the loss of acceleration concerns when requested. No chime activated but should have received one per manual. A safety warning was present on the dash, “Check Hybrid System. Stop Safely” service warning triangle. I am unsure how long it appeared before the loss of acceleration due to no chime.
- Tires · Unknown or other
I purchased my car in May 2021. Shortly after purchase, I noticed a "clicking" sound under the car when the car was operating between 15 and 20 MPH. I took the car to the dealer, who couldn't identify what was causing the sound. The dealer subsequently replaced the front axle, but the clicking…
I purchased my car in May 2021. Shortly after purchase, I noticed a "clicking" sound under the car when the car was operating between 15 and 20 MPH. I took the car to the dealer, who couldn't identify what was causing the sound. The dealer subsequently replaced the front axle, but the clicking sound continued, only audible when the car was moving at between 15 and 20 MPH. On June 9, I was driving at about 40 MPH on an interstate that had only a few cars on it. I didn't notice any debris or objects in the road, nor did I feel the car hit any debris or objects. Suddenly, I heard a loud "crunching" sound that I mistook for interference from the radio. I turned the radio off and realized the sound was coming from the rear passenger side of the car. I looked at the dashboard and saw the tire pressure light had illuminated. A few seconds later, the triangular danger sign also illuminated. I got off the highway at the next exit and stopped the car as soon as it was safe. The car made a lot of noise as I drove down the exit ramp, and it was difficult to steer, so I knew that the rear tire was flat. I got out of the car and found, to my surprise, that both tires on the passenger side were flat. The rear tire was cracked and ripped apart. The front tire was intact, but completely flat. The car has not been inspected yet, so I don't know what caused both tires to flatten at the same time. If I'd hit something hard enough to flatten both tires, I'd think I would have seen or felt it. My concern is that a defect in the tires related to the mysterious clicking sound that the mechanics could not diagnose caused the tires to blow out without warning at the same time.
- Electrical system
The vehicle has a wireless phone charger which causes the phone to overheat. It causes so much heat that the phone shuts down to prevent damage to the phone. There is a potential risk for fire.
- Fuel/propulsion system
This vehicle hesitates to a dangerous degree when trying to accelerate from a stop or rolling stop. When pressure is applied to the gas pedal, the vehicle will not accelerate until nearly a whole second later. This delay in response has created dangerous situations where merging onto a road in a…
This vehicle hesitates to a dangerous degree when trying to accelerate from a stop or rolling stop. When pressure is applied to the gas pedal, the vehicle will not accelerate until nearly a whole second later. This delay in response has created dangerous situations where merging onto a road in a predictable and smooth manner is crucial (i.e. turning right at a red light, a 4-way stop). I did not notice this problem during my test drive, but now at almost 10,000 miles, the problem has become more pronounced. No warning messages in the gauge display. The vehicle has not been inspected by police, manufacturer, or insurance representative.
- Air bags · Seat belts · Seats
Visual Red Triangle code illuminated on the instrument cluster with the number 1 on the side of it. I used my OBD2 reader (Blue Driver) to retrieve the 8 AIR BAG codes. They were B1511 ,B1513, B1378, B1382, B1346, B1481, B14AE, B2618. Problem resulted after the Cowl Cross Bar Assembly (Unpainted)…
Visual Red Triangle code illuminated on the instrument cluster with the number 1 on the side of it. I used my OBD2 reader (Blue Driver) to retrieve the 8 AIR BAG codes. They were B1511 ,B1513, B1378, B1382, B1346, B1481, B14AE, B2618. Problem resulted after the Cowl Cross Bar Assembly (Unpainted), also known as a CRASH BAR, was replaced because of broken welds. It was replaced with a Painted Assembly that prevents access to secure ground for the Air Bags and Seat Belts. The Assembly is used to provide support in case of a crash and also serves as a grounding bus bar for multiple devices, such as; Air bags, seatbelts, Instrument cluster, on board safety cameras, lane, backup warnings, etc...
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Pedestrian alert sounds
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for…
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10253275This TSB provides a procedure to diagnose and replace, if necessary, an automatic transmission with Incorrect Ratio DTC (transmission clutch slip in gear above limit) listed on Page 2.
- 10251285This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
- 10247189This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
- 10245580This TSB provides information to diagnose the push button shifter operation.
- 10243329If you are servicing an 8-speed front-wheel-drive vehicle equipped with automatic transaxle with one or more of the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. DIAGNOSTIC TROUBLE CODES: P070500 - Transmission range sensor circuit malfunction P070512 - Transmission range sensor circuit malfunction P070514 - Transmission range sensor circuit malfunction P07051C - Transmission range sensor circuit malfunction P070600 - Transmission range sensor circuit range/performance P070661 - Transmission range sensor circuit range/performance P070696 - Transmission range sensor circuit range/performance SYMPTOMS: Malfunction Indicator Light (MIL) illuminated 5th gear fail-safe Intermittently wont shift into D or R Intermittently wont shift out of Park Intermittent ly no engine cr ank/n o start in P or N with or without MIL or DTC.
- 10241887The Shift-By-Wire (SBW) buttons have been made available as separate service parts for the SBW lever. If replacement of the SBW button is required due to one or more button plating peeling, replace the button(s) with a new one. Do not replace the complete SBW lever.
- 10240088This bulletin provides information related to the cleaning of the cooling system and coolant change to address the following problem: Refill Inverter Coolant warning light displayed on the cluster No DTCs present Normal level of coolant in Inverter Reservoir Tank Measured EWP Speed > 2,800 RPM The cause of the warning light is due to increased EWP Speed due to poor flow of coolant inside the cooling circuit. The coolant in the system will be discharged and any foreign substances in the circuit will be flushed out with new coolant added in the end. A new reservoir cap label will be added.
- 10240087This Service Information bulletin provides information on how to update the Apple Carplay software from Hyundais Navigation Updates page. The current version of Google Maps has 10 times the data transmission compared to the previous version. As a countermeasure, an update with a frame skip logic has been added to resolve the data congestion with Google Maps.
- 10240084If you are servicing an 8-speed front-wheel-drive vehicle equipped with automatic transaxle with one or more of the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition.
- 10238350This bulletin provides information related to the cleaning of the cooling system and coolant change to address the following problem: Refill Inverter Coolant warning light displayed on the cluster No DTCs present Normal level of coolant in Inverter Reservoir Tank Measured EWP Speed > 2,800 RPM The cause of the warning light is due to increased EWP Speed due to poor flow of coolant inside the cooling circuit. The coolant in the system will be discharged and any foreign substances in the circuit will be flushed out with new coolant added in the end. A new reservoir cap label will be added.
- 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
- 10235557This bulletin provides information related to the Engine Control Module (ECM) software update for Santa Fe Plug-in Hybrid (TM PHEV) and Santa Fe Hybrid (TM HEV) vehicles to improve the following DTC and symptoms:
- 10235353This bulletin provides information related to the HCU software upgrade to resolve the following symptoms: Possibility that the engine cannot run due to poor immobilizer function (although driving with electric motor is possible) HCU function setting error
- 10232200This bulletin provides information related to the Engine Control Module (ECM) software update for Santa Fe Hybrid (TM HEV) / Santa Fe Plug-In Hybrid (TM PHEV) vehicles to revise the following DTC logic: P1441(PCSV rear and hose missing) P1A77(HSG Belt slip) P00B7(Excessive ITM motor operating current) P2118 (ETC target position failure) P0401 (EGR gas flow insufficient) P0236 (Turbocharger boost sensor range abnormal) P0299 (Turbocharger boost pressure too low)
- 10230909This bulletin describes the procedure to diagnose and repair tire pressure monitoring system (TPMS) DTC(s) on some 19MY and newer Santa Fe (TMA), 2021MY and newer Santa Fe Hybrid (TM HEV), 2022MY and newer Santa Fe Plug-In Hybrid (TM PHEV), and 2019MY and newer Palisade (LX2) vehicles equipped with surround view monitoring (SVM) system.
- 10230904This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
Every Hyundai Santa Fe Hybrid model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.