Navistar, Inc. (Navistar) is recalling certain 2015-2018 IC Bus RE commercial buses. The drop hose fittings for the air brakes may not be oriented correctly, and, as a result, the brake hoses may contact the tire when the wheels are turned to the limit.
Risk and remedy
Risk
Contact with the tires may damage the service brake air hose, causing the brakes to become inoperative or lengthening the distance needed to stop the bus, increasing the risk of a crash.
Remedy
Navistar will notify owners, and dealers will reposition the drop hose fittings and replace any damaged drop hose or wheel speed sensor harness, free of charge. The recall began on November 21, 2017. Owners may contact Navistar customer service at 1-331-332-4331. Navistar's number for this recall is 17511.
Navistar, Inc. (Navistar) is recalling certain model year 2016 IC Bus RE transit buses manufactured November 12, 2015, to November 16, 2015, equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts by Ricon. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the…
Risk and remedy
Risk
If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.
Remedy
Navistar will notify owners, and Ricon dealers will inspect the link arms for damage or for displaced bearings. The platform will be inspected for cracks. Any damaged parts will be replaced, free of charge. The recall began on December 28, 2016. Owners may contact Navistar customer service at 1-331-332-1590, or Ricon Customer Service at 1-800-322-2884.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
11010428This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean.
10251414Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine.
10251409Suggested alignment target values when performing a vehicle axle alignment.
10246231J1939 Data Link Source Address Information
10243610How to request a horsepower quote; all International and Cummins engines
10241555J1939 Data Link Source Address Information
10241554J1939 Data Link Troubleshooting
10234015Cummins Programming guide and fault codes285 & 265; only vehicles built with Cummins B6.7, X15, or L9 engines
10234000Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles equipped with PSI engines or Cummins ISB engine with Allison transmissions
10231068QLS Emergency ECM Calibration; only models equipped with Cummins B6.7, X15, L9, or International A26 engines
10227455J1939 Data link source address information