Iowa Mold Tooling Co., Inc. (IMT) is recalling certain 2016-2017 Dominator Contractor series trucks built on 2017 Ford Super Duty chassis. These vehicles are equipped with a front jump start plug kit installed under the hood at the chassis battery. The fuse block for this kit may contact the hood creating an electrical short.
Risk and remedy
Risk
An electrical short can increase the risk of a fire.
Remedy
IMT will notify owners, and dealers will replace the jump start kit mounting bracket, thereby relocating the fuse block, free of charge. The recall began on September 29, 2017. Owners may contact IMT customer service at 1-800-247-5958. IMT's number for this recall is TB2017006.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
11007578IMT has identified that hydraulic back pressure can lead to leaks in the CAS40PL or CAS40PL-CW motor in certain system setups. As a solution, IMT is shifting to a motor design that includes and internal check valve to reduce the likelihood of failure from back pressure.
11007575IMT has redesigned the front body mount brackets to facilitate easier installation and eliminate the need for shims.
10239005Ford Motor Co. has made IMT aware of various wiring changes to 2023MY F-250 - F-600 Super Duty chassis models. These changes resulted in the required installation of a decoder module to replicate the E-Brake signal for standard system operation. The following part number will be added to price sheets for all orders selecting any 2023MY Ford Super Duty chassis models F-250 - F-600.
10235768IMT has been recently made aware that GM Silverado 4500/5500/6500 and International CV series chassis equipped with IROS (International Ride-Optimized Suspension) air ride suspension are not compatible with IMT Dominator bodies if the chassis is equipped with a rear mounted fuel tank. The air ride suspension with rear mounted fuel tank configuration requires an after frame dimension that exceeds the allowable maximum for mounting of a Dominator body.
10206092Ford Motor Co. has informed IMT of stress points that could cause a crack in the frame rail behind the cab on certain MY 20172020 Ford F550 chassis. Because of the increased height due to Fords reinforcement, IMT has created a field retro installation kit, part number 51728356. Two (2) new front mounting brackets and hardware will be included in kit 51728356 which will solve the increased height issue.
Every Imt Dominator model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.