2000 Infiniti G20

Owner complaints

What owners report most

1. Engine and engine cooling2
2. Suspension2
3. Electrical system2
4. Seat belts1
5. Service brakes1
6. Air bags1
7. Unknown or other1
8. Equipment1
9. Power train1

Latest complaints

• Aug 28, 2014KS144,000 mi
  Power train · Service brakes
  We were sold a lemon vehicle from evans motors located at 112 w st john st, girard ks by eddie walsh. We have had the vehicle now for a little over 1 month. The back brakes went out, the front brakes went out as my son was driving the vehicle and the brake pads went flying. that same day we found…

  We were sold a lemon vehicle from evans motors located at 112 w st john st, girard ks by eddie walsh. We have had the vehicle now for a little over 1 month. The back brakes went out, the front brakes went out as my son was driving the vehicle and the brake pads went flying. that same day we found out that the transmission was bad and needed to be replaced and would cost around $1000 to $3000 to be fixed. evans motors has yet to even attempt to help fix this issue. they informed us that we bought the vehicle and it IS now our problem not theirs. my son IS a college student with an infant 2 month old son and he needs a dependable vehicle to transport his son in, to go to school and work. I want someone to help me with the issue at hand. *tr

• May 6, 2009CT
  Air bags · Electrical system

  Purchase a 2000 infinity from a car dealer with out air bags and without the diagnostic computer/equipment. *Tr

• Oct 5, 2004TX
  Electrical system › Starter assembly

  While starting up the vehicle a loud noise came from front. Consumer took the vehicle to the dealer for inspection, and mechanic determined that the starter needed to be replaced. But consumer was responsible to pay for parts and labor. *Ak

• Jan 4, 2004AZ68,500 miCrash
  Suspension › Front
  At approximately 11:00 pm on january 04, 2004 I was heading east bound on interstate 10 and exited the freeway at the orange grove exit. as I approached the orange grove intersection I proceeded on a green light to make a left onto orange grove. traveling at a reasonable speed for the…

  At approximately 11:00 pm on january 04, 2004 I was heading east bound on interstate 10 and exited the freeway at the orange grove exit. as I approached the orange grove intersection I proceeded on a green light to make a left onto orange grove. traveling at a reasonable speed for the intersection, I noticed a loud pop in the front end, and consequently lost control of the steering. at this time I was forced to the right and came in contact parallel to a cement barrier causing minimal body damage to my 2000 infinity G20. no injuries were sustained. *la

• Feb 6, 2003NJ34,000 mi
  Unknown or other
  Bought new car,never in an accident.exclt cond expt top coat paint IS peeling from hood roof trunk.was sent to a specialist and they informed me that it couldn't be chemicals because if chems had fallen on the car it would have eaten thru all coats.11/22/02 took the car to joe valenti lynne's…

  Bought new car,never in an accident.exclt cond expt top coat paint IS peeling from hood roof trunk.was sent to a specialist and they informed me that it couldn't be chemicals because if chems had fallen on the car it would have eaten thru all coats.11/22/02 took the car to joe valenti lynne's infiniti he took dig pics, submitted them to infiniti.12/3 claimed that it was bird droppings or chems had fallen on car.told joe why does it continue to appear in diff. Locations & it didn't eat all the way thru paint.he said that the case was closed.called cust svc darryl in regards to the decision.darryl said,joe claimed the car had chem damage.12/6 called joe he said he never said that.12/11spoke to debora fredrick (sup cust svc), said joe was lying.nothing resolved.12/16 kirk quinones svc mgrinfiniti told me will call infiniti to see if someone will look at the car in person.12/17 kirk called and told me that they said he will look at car,if he determined it wasn't chems,they would send someone from infiniti to look at car.12/18 took car to kirk for inspect. Said he was qualified to look at paint.he determined it couldn't be chems.reported it as blistering.said he will submit info & will call back tom.1/8/03 said he had forgotten about me and he was calling infiniti now.1/10 kirk called &told me that the inspector will come to see car.scheduled meeting 1/16 10am.1/16 arrived at dlr 10am.kirk said to have a seat inspc should be arriving & took my car keys.10:30 am, kirk informed me that the inspctr was lost and will be here soon.told kirk to make sure to come & get me.approx11am kirk returned w/ my keys & said I was done.never got me.saidthey just took pics.1/20 kirk called me &said claim was denied due to chems.i asked how, he and the specialist said same thing.he said that there IS nothing more to do,decision IS final

• Aug 6, 2002AZ
  Engine and engine cooling › Exhaust system
  Consumer states for the past 2 years there has been an ongoing problem with a rotten egg/sulfur smell coming out of the exhaust, consumer has taken vehicle to the dealership at least 3 times to try and get the problem resolved, consumer has been told that the wrong type of gas was being used, that…

  Consumer states for the past 2 years there has been an ongoing problem with a rotten egg/sulfur smell coming out of the exhaust, consumer has taken vehicle to the dealership at least 3 times to try and get the problem resolved, consumer has been told that the wrong type of gas was being used, that there was no smell, that a particular part in the vehicle could not be replaced only adjusted, consumer even had an update performed on the vehicle, however the problem still exists. *jb nar 8/22/02. *scc *cb jb

• Jun 24, 2002ILCrash1 injury
  Suspension
  I was on the east bound ramp merging into traffic, a 18 wheeler (no load) supposedly swerved to the right to avoid hitting a car that crossed in front of it. I tried to avoid the accident but couldn't because there was no place to go (no median to the right) when I noticed the truck heading…

  I was on the east bound ramp merging into traffic, a 18 wheeler (no load) supposedly swerved to the right to avoid hitting a car that crossed in front of it. I tried to avoid the accident but couldn't because there was no place to go (no median to the right) when I noticed the truck heading towards me, I thought I had gotten out of his way, however, he stated that his wheels/brakes locked causing the front end of the truck to hit me directly on the driver's side. when he hit my car, I was knocked across the highway and ended up in the median pointing west, I did a complete 180 degree turn, the whole drivers side was damaged, the glass shattered in onto me, my seatbelt failed to retract and my side airbag did not deploy. I estimate that I was going about 45 to merge onto the highway, and he was on the highway doing about 65 when he lost control, fortunately the traffice was not that heavy, it was about 3PM on a friday evening , the weather was clear and sunny, and since traffic was not too heavy all the motorists were able to avoid me, and I believe several dialed 911 when it happened because the city police was there within minutes and told me not to move that ems and the state trooper was on the way. both arrived within 5 minutes after I had come to a complete stop. I was left with ruptured discs in my neck, bulging discs in my lower back and some nerve damage. he was issued a citation by the state police.*ak

• Jun 17, 2002AZ
  Engine and engine cooling › Exhaust system › Emission control › Catalytic convertor

  Sulfur/eggy smell coming from exhaust system. vehicle taken to dealership on numerous occassions (4 times) with no resolution. Complaints filed with bbb, and infiniti customer service. I want the problem fixed or I want to use the lemon law and get my money back. a letter was also sent to the nhtsa.*ak

• Apr 19, 2001OK
  Equipment › Appliance › Air conditioner
  This IS a new car and supposed to be under warranty. the a/c would not work when turned on this yr. took it to dealer and was told a rock hit the condenser and put a hole in it. was told that that IS not covered by the warranty. first of all, if it only takes a rock to put a hole in the…

  This IS a new car and supposed to be under warranty. the a/c would not work when turned on this yr. took it to dealer and was told a rock hit the condenser and put a hole in it. was told that that IS not covered by the warranty. first of all, if it only takes a rock to put a hole in the condenser, that IS definantly a design flaw. rocks are everywhere on the hiways. If this vehicle IS this badly damaged by normal road conditions then the manufacture should have placed some kind of shield over these critical components.*ak

• Aug 24, 2000VA
  Seat belts › Front › Webbing
  Both rear seat belts lock around the occupants extremely tight within 0-10 mintues, trapping occupants in the seats. This happens while vehicle IS moving, and when the vehicle IS not moving. Dealership/manufacturer have been told about the seat belt problem numerous times. Solution given defeats…

  Both rear seat belts lock around the occupants extremely tight within 0-10 mintues, trapping occupants in the seats. This happens while vehicle IS moving, and when the vehicle IS not moving. Dealership/manufacturer have been told about the seat belt problem numerous times. Solution given defeats the purpose of the seat belt. *ak the solution by the dealer IS to unhooking the seat belts, slowly lefting them retract and rehooking them. *yh *slc

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11002539INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 11001182WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 11001179REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 11001177WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10232646REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10232645WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10232644WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10192802SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement "Certification Label" or "VIN Plate / Label" may be needed. These items may be available from Infiniti by request if certain criteria are met. This bulletinlists the criteria and provides an application form for such replacements. See this bulletin for further detail.
• 10192693SERVICE INFORMATION Windshield "foreign material" that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool. * Most any foreign material on the surface of the Windshield can be cleaned off by using #0000 super fine steel wool. >The #0000 grade super fine steel wool can be found in most hardware stores. Please see this bulleitn for further details.
• 10192514SERVICE INFORMATION Changes or modifications to the front seat assembly trim materials may affect the proper operation of the Front Seat-Mounted Side-Impact Supplemental Air Bags and Passenger Occupant Classification Sensor and could result in serious personal injury or death. Infiniti STRONGLY RECOMMENDS AGAINST making any change to seat trim materials from the factory equipped condition. This specifically applies to replacing the seat trim with non-factory materials; adding leather/cloth seat covers, seat pads, or seat storage pouches, etc. around or over the seat back and the passenger seat cushion. See this bulletin for further detail.
• 10192314SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail.
• 10192235Infiniti Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating (clear, chrome, titanium, etc.), are specifically developed to achieve Infiniti design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Infiniti's standards. Infiniti Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Infiniti most strongly discourages, and recommends that these wheels NEVER be subjected to, aftermarket chroming. See this bulletin for further details.
• 10192219SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake issues fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel, or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake issue based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific issue. See this bulletin for further details.
• 10192218If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incidents. - Brake judder: A brake pedal pulsation and/or steering wheel shimmy when braking that occurs when there is too much thickness variation of the brake rotors (see ITB00-024). See this bulletin for further detail.
• 10192191As part of an enhanced emissions test for Inspection & Maintenance (I/M), some States may require the System Readiness Test (SRT) status be checked. - The SRT is used to indicate whether the engine control module (ECM) has completed self diagnosis of major emissions systems and components. - In these instances the State may require completion of the SRT before permitting the emissions inspection to proceed. Refer to this Bulletin for further details.
• 10192146SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition which is considered normal, does not affect strut/shock absorber operation or performance, and does not require replacement. - A strut or shock absorber that should be replaced due to rod resistance/noise issues. See this bulletin for further detail.
• 10190150INFINITI; FRONT SONAR PARKING SENSOR SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
• 10160176EXTERIOR CLEANING INFORMATION SERVICE INFORMATION When cleaning the exterior of an Infiniti vehicle, damage may occur when using a cleaner with too high of an alkaline concentration. - Always refer to the Appearance and care section of the related owner?s manual. - Not all cleaners are created equal. - Many cleaners come in concentrated form. - Alkaline cleaners (cleaners with a high pH value) can cause spots on paint and trim when not used as directed. - Some commercial car washes use cleaners with a high pH value. - When using cleaners that meet the conditions defined in the Appearance and care section, be sure to carefully follow the cleaner?s directions. - When finished cleaning/washing, rinse thoroughly with clean water. IMPORTANT: Damage to paint, glass, bright metal, or any other exterior surface caused by using improper cleaning products is not covered under warranty. Always refer to the Paint Incident Identification Manual (PIIM) and Assurance Products Reference Manual (APRM). Follow the guidelines in the PIIM and APRM for non-warrantable exterior body, glass, or painted surface quality issues. To access the PIIM and APRM, login to nnanet.com: - For the PIIM, select: MY LINKS > Warranty > Paint Incident Identification Manual - For the APRM, select: MY DOCUMENTS > Warranty > APRM See further information in this bulletin.
• 10149809PLASTIC INTERIOR TRIM PROTECTIVE COVERING REMOVAL SERVICE INFORMATION Vehicles are delivered with plastic interior trim protective covering on the front and rear seats, front and rear door panel finishers, steering wheel, and sun visors (see examples on page 2). When removing the protective covering, care must be used to avoid scuffs, scrapes, cuts, and other abrasive contact to interior trim components. DO NOT use sharp objects like razor blades, box cutters, knives, etc. when removing the plastic interior trim protective covering. IMPORTANT: All soft trim described in this bulletin is on automatic return to NNA. Any trim found damaged in the way described in this bulletin will be charged back to the dealer.
• 10149806TRANSMISSION & ENGINE AUTOMATED DATA COLLECTION AND DIAGNOSTIC REPORTING SERVICE INFORMATION To support proper diagnosis and to promote Fixed-Right-First-Time ? Infiniti may review CONSULT-III plus (CIII plus) data relating to vehicle operation and function to help with vehicle diagnosis and diagnostic validation. IMPORTANT: For transmission/engine repair or replacement, retailers are required to connect C-III plus and perform ?Diagnosis (All Systems)?. Performing C-III plus ?Diagnosis (All Systems)? is also required prior to contacting any Infiniti call center (i.e. TECH-LINE, PCC, or WCC) for diagnostic support or claim preauthorization. NOTE: For additional information regarding Automated Vehicle Data Collection, refer to IWBI/18-019. To support Automated Vehicle Data Collection, your C-III plus must have the Diagnosis result reporting function-Setting turned ON. If Diagnosis result reporting function-Setting is OFF: - It may cause dealer consideration for Audit or the Anomalous Repair Control (ARC) program, where applicable. - It may result in a repair being non-warrantable. Refer to the Service Procedure on the next page to confirm your C-III plus ?Diagnosis result reporting function-Setting? is turned ON.
• 10149803Infiniti USA Electronic Field Communication Subject: Takata Completion Objectives for Q3 INFINITI is continuing to ask its retailers to urgently help increase customer participation in the Takata recalls to help it achieve 100% customer recall participation for the following vehicles: ? 2001 I30 ? 2002-04 I35 ? 2003-08 FX ? 2002-03 QX4 ? 2006-10 M Sedan INFINITI expects to upload the next refreshed owner list to DBS within the next week. We will also be reassigning VINs to retailers based on information changes. We didn?t reassign any VINs in Q2 to avoid any mid-quarter objective impact. If VINs were repaired out of network, the retailer/region with the original assignment received credit for the repair. This is an extremely serious safety issue and INFINITI is taking significant and unprecedented steps to increase client recall participation but it needs retailer help to achieve its remedy goals. A separate communication will be released later this month informing regional personnel of the requirements for bonus payout in Q3 and Q2 results. The Q3 objective is based on the average number of repairs in Q2 multiplied by the number of service days in Q3 (Mon-Sat minus any holidays). Retailer engagement is critical with this effort. It is a company-wide responsibility to make it a priority to replace these dangerous airbag inflators in affected vehicles. Further, increasing recall participation represents significant gross profit opportunity for our retailers.
• 10149802Infiniti USA Electronic Field Communication Subject: Retailed Vehicle Open Campaign Report Lists Updated The lists for each retailer?s Retailed Vehicle Open Campaign Report has been updated today in DBS. We made our best effort to reassign vehicles to retailers based on the most recent owner information we received. The complexity of filtering out brokers (banks, salvage yards, and insurance companies) and reassigning VINs based on updated owner information affected over 123K records between INFINITI and Nissan, so we are unable to summarize the changes at a regional or retailer level. We suggest the retailers download their lists and have their outbound call centers compare information if necessary. If you have questions, please let us know. Additionally, we will have some enhancements coming in DBS effective November 17, 2018: Owner Data Updates (NNA side): 1. VIN, Campaign Code, and Source are the unique fields 2. Compare all fields except Remove Flag and Comments to see if there is a difference. a. If there is same VIN, Camp ID, and Source and all other fields are also the same then the record will be updated without changing Remove Flag and Comment field b. If there is same VIN, Camp ID, and Source and any other field is different, then the record will be inserted, in this case Remove Flag and Comment field will be blank as this is new record. The remove flag is being removed so the retailer will understand the information they previously flagged for removal has been updated and should be tried again before reapplying the removal flag. c. The retailer benefit of A & B above is duplicate records for the same VIN, Camp ID, and information source with the same customer contact information will no longer display in DBS on the Retailed Vehicle Open Campaign Report.
• 10145541DBS Enhancement: Retailed Vehicle Open Campaign Report INFINITI announced the availability of a new DBS enhancement tool to the Service > Campaign screen: Retailed Vehicle Open Campaign Report on July 9, 2018, which identifies owner contact information for specific campaigns. Currently, only Takata campaign owner lists are available. The following personnel will have access to this tool: - Retailer: Dealer Principal, Executive Managers, General Managers, Parts/Service Managers, and/or Parts/Service Directors - Regions: Regional Aftersales Manager (RAM), Regional Operations Managers (ROM), Fixed Operations Manager (FOM), Dealer Operation Managers (DOM), Regional Service Operation Managers (RSOM), and Client Experience Managers (CEM) The report can be viewed on screen or exported to Microsoft Excel and identifies the following: - VIN - Campaign ID & Campaign Description - Model & Model Year - Data Source o Up to three data sources can be provided for each VIN - RO Info: If this VIN has visited an Infiniti retailer anywhere in the U.S. within the last twelve months, the RO information will be displayed. - Campaign Mailing List: This is DMV data for the VIN listed - Marketing List: If an owner is on your marketing list, their contact information from that list will be displayed here. DMV data is not used for marketing list owner information. - Contact Name - Last Name/First Name & Address (City, State, Zip) - Phone (1-3) & Email (1-3) - Remove Flag o This defaults to ?N? unless the retailer or INFINITI USA flags this VIN for removal. o The removed information will still show on the DBS screen and exported report, but can be filtered on the exported file to only display the records with ?N? in this column.
• 10144484NEW PAINT GUARD FILM REMOVAL INFORMATION This bulletin applies only to new, unsold vehicles with Paint Guard Film in Dealer Stock. This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin.
• 10136636DBS Enhancement: Custom VIN Campaign Report INFINITI is pleased to announce the availability of a new DBS enhancement to the Service > Campaign screen: Custom VIN Campaign Report. The tool identifies open campaigns on a customized VIN list loaded into DBS for INFINITI and Nissan vehicles. The following personnel will have access to this tool: - Retailer: Executive Managers, Service Managers, and/or Service Directors - Regions: Regional Aftersales Manager (RAM), Area General Manager (AGM), Fixed Operations Manager (FOM), Regional Service Operation Managers (RSOM), and Retailer Technical Specialist (DTS) The VINS can be loaded individually or up to 10,000 VINs at a time. If you have more than 10,000 VINs, each incremental VIN file of 10,000 or less VINs will need to be loaded prior to selecting the Check For Open Campaigns option. The report can be viewed on screen or exported to Microsoft Excel and will identify the following for each VIN loaded into the tool: - Open Campaigns (ID and description) - Model Code, Model, and Model Year - Current Repair Status Blank: Repair order (RO) has not been opened yet Unrepaired: RO has been opened for the campaign, but not closed or submitted o Repaired: RO for the campaign has been closed and a warranty claim has been submitted - Current Claim Status o Blank: RO still open o Unsubmitted: A warranty claim for the campaign repair has not been submitted o Submitted: A RO has been closed and a campaign warranty claim has been submitted for payment o Suspended: The campaign warranty claim has suspended for one or more errors o Rejected: The campaign warranty claim has been denied for some reason (by retailer or NNA) o Paid: A campaign warranty claim has been submitted and paid by NNA, but the vehicle has not yet been removed from the NNA open campaign vehicle table - Stop Sale Applicability - Parts Restriction Applicability (If restricted, SVC order must be used to acquire parts)
• 10129111REDUCED VEHICLE LOAD CAPACITY LABEL (REGULATORY REQUIREMENT) This bulletin applies to vehicles equipped with dealer installed or VPC installed accessories. SERVICE INFORMATION The National Highway Traffic Safety Administration (NHTSA) requires that any automobile dealer that installs accessories on a vehicle prior to first retail sale must install a special label (?reduced capacity label?) on that vehicle if the total weight of all accessories on that vehicle exceeds 1.5 percent of the vehicle?s gross vehicle weight rating (GVWR) or 100 pounds, whichever is less. This includes accessories that the dealer installs (dealer installed factory accessories and dealer installed aftermarket accessories), and accessories installed at the Vehicle Processing Center (VPC) prior to the vehicle being delivered to the dealer. IMPORTANT: Failure to comply with this requirement may result in penalties imposed by NHTSA. Follow the instructions in this bulletin to help meet these requirements.
• 10127465WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended to apply to the latest models and model years, and warranty information on page 2 has been updated. No other changes have been made. Please discard previous versions of this bulletin.
• 10127462WINDSHIELD CRACKING This bulletin has been amended to apply to the latest models and model years. Also, warranty information on pages 1 and 8 has been updated. No other changes have been made. Please discard previous versions of this bulletin.
• 10127461BRAKE NOISE/JUDDER/PEDAL FEEL DIAGNOSIS AND REPAIR This bulletin has been amended to include vehicles built up to the publication date. Also, tips for using the ProCut? brake lathe were added on page 8, and a Brake Noise Diagnostic Worksheet was added on page 10. Please discard previous versions of this bulletin.
• 1011921012 VOLT BATTERY STORAGE AND MAINTENANCE FOR NEW VEHICLES IN RETAILER INVENTORY This bulletin has been amended throughout. Please discard all previous versions of this bulletin.
• 10051765Infiniti: lock/unlock request button on outside door handle outside door handle does not respond. Lock/unlock request button located on outside door handles of vehicles can be disabled (or enabled) through either the "comfort & conv" settings of the audio/visual/navigation system or through the "combination meter settings" depending on the vehicle model, year, and trim level.
• 10044526Infiniti: reprogramming electronic control unit (ecu) on all qualifying vehicles. No models listed. Model years 1998-2013.
• 10032524Infiniti: vent control valve replacement. No applied vehicles affected: all models; no model years listed.
• 10032305Infiniti: srs precautions during service. Included in the restraints section of the electronic service manual (esm) for each vehicle IS information necessary to service the supplemental restraint system (srs) safely. Improper maintenance, including incorrect removal and installation of the srs, can lead to a serious injury or death caused by unintentional activation of the srs. No model or model years listed. Updated 2/21/14.
• 10031304Infiniti: tire pressure monitoring system (TPMS) warning light on/blinking. No models or model years listed. Updated on 08-11-2011.
• 10030145Infiniti: electronic control unit damage can result from improper battery connection. The battery IS required to stay connected when the engine IS running. No model years listed.
• 10016837A malfunction indicator lamp on with diagnostic trouble code p0134 - ho2s1 (B1) stored in the engine control module.
• 10004599The infiniti integrated homelink transmitter system. Various models including 1996-2004 i30/i35; 2004 Q45; 2004 M45.
• 10003519Front seat belt latch plate retaining button missing. Various models including the 2004 G35.
• 10000404Engine will not start. Vehicle immobiilizer system/nissan anti-theft systm (ivis/nats).

Every Infiniti G20 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.