2011 International 3200
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › International › 3200 › 2011
These records cover every 2011 International 3200. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2011 International 3200. Newest first.
Navistar IS recalling certain model year 2005-2011 international 3200im, and model year 2007-2011, ic bus model hc buses, manufactured from august 16, 2004, through may 13, 2010. when the bus kneeling feature IS activated, the rear brake line may be pinched by a frame member causing the rear brakes to drag.
Risk and remedy
Risk
Brakes that drag could overheat and may lead to a fire, which may cause property damage, personal injury, or death.
Remedy
Navistar will notify owners, and dealers will install a clip to ensure that the brake line cannot be pinched. this service will be performed free of charge. the safety recall began on april 27, 2012. owners may contact navistar at 1-800-448-7825.
Owner complaints
2 complaints
Latest complaints
- Service brakes
Tl*the contact owns a 2011 international 3200 bus. the contact stated that the drive line retarder supports and support brackets were severely fractured and completely detached. The vehicle was taken to the dealer. The technician was not able to diagnose the failure. The manufacturer was made aware of failure. The vehicle was not repaired. The failure mileage was 19,756.
- Service brakes
TL* the contact owns a 2011 international 3200 bus. the contact stated that the drive line retarder supports were severely fractured and detached. The vehicle was taken to the dealer. The dealer was not able to diagnose the failure. The manufacturer was made aware of failure. The vehicle was not repaired. The failure mileage was 70,000.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010428This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean.
- 10251414Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine.
- 10251409Suggested alignment target values when performing a vehicle axle alignment.
- 10246231J1939 Data Link Source Address Information
- 10243610How to request a horsepower quote; all International and Cummins engines
- 10243596General Wheel Speed Sensor Troubleshooting
- 10243595Diagnosis of chassis wander complaints.
- 10241555J1939 Data Link Source Address Information
- 10241554J1939 Data Link Troubleshooting
- 10234000Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles equipped with PSI engines or Cummins ISB engine with Allison transmissions
- 10222490Pico Scope CCOS (Crankcase Separator Test)
- 10219330PicoScope Test One Channel RCT
- 10219325PicoScope Test Resistance and Ohmmeter
- 10219319PicoScope Test for Datalink (CAN) Health Shorts & opens
- 10219314PicoScope Test - Battery Loss of Charge - Parasitic Draw Test
- 10209487Calculating pulses per mile (speedometer setting); only models equipped with International engines
- 10204139Power Steering Diagnostics Flow / Pressure Specifications For Power Steering Gears and Power Steering Pumps
- 10204137J1939 Data Link Troubleshooting
- 10204134WABCO Full Power Brake Diagnostic Code (DTC) Index
- 10201758Engine Oil Capacities. All International electronic engines 1994 to present and Cummins ISB, ISM, or ISX engines
- 10199915General wheel speed sensor troubleshooting
- 10198708Aftertreatment Clamp Corrosion; Single Can Aftertreatment Systems
- 10185108ECM Calibration for DPF Replacement; only trucks and busses built with 2007- 2009 MaxxForce DT/9/10. 2010-2012 MaxxForce DT/9/10, 2007-2009 MaxxForce V8, 2008-2009 MaxxForce 11/13 engines
- 10179294Driveline Information Center and Troubleshooting Procedures
- 10179289Repair Procedures for Vehicles Struck by Lightning
- 10177073This article is for adding additional protection to the driver's area of the bus to help mitigate the transmission of germs.
- 10173025Cleaning and Disinfecting Trucks and Buses
- 10172045J1939 Data Link Troubleshooting
- 10166290Adjustment Procedure for Tilt Only Steering Column; only models with Feature code 0005708
- 10165643Oil Capacities; All Electronic International Engines 1994 - Present. Cummins ISB, ISM & ISX
- 10163416Suspension Lean Diagnostics; All models
- 10162034J1939 Data Link Source Address Information
- 10156576Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure
- 10156324Driveline Information Center and Troubleshooting Procedures
- 10156308FLR-10 Bendix Wingman Misalignment Issues; only models with Feature Code 08TKY Wingman FLR-10 Radars
- 10156305Tool Instruction - BCM Programming Harness
- 10145721A/C Refrigerant and Oil Capacities
- 10145715Engine Oil Capacities All Electronic International Engines 1994 - Present. Cummins ISB, ISM & ISX
- 10145711Radio Diagnostics and Information
- 10143900Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure; only Navistar Powered Trucks
Every International 3200 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.