2011 International Paystar
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › International › Paystar › 2011
These records cover every 2011 International Paystar. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2011 International Paystar. Newest first.
Navistar IS recalling certain model year 2010 through 2013 paystar, workstar, transtar, and prostar, and model year 2012 and 2013 lonestar commercial trucks manufactured from june 1, 2009, through april 4, 2012, equipped with a maxxforce 11 or 13 engine (feature code 12uxj or 12uxh) and with bosch alternator feature codes 08ggn, 08ggr, 08ghg, or 08ghh. the…
Risk and remedy
Risk
An electrical short may cause a vehicle fire possibly resulting in property damage, personal injury, or death.
Remedy
Navistar will install a standoff bracket and improve harness routing to better route the alternator wires away from the power steering hose. the safety recall began on july 16, 2012. owners may contact navistar at 1-800-448-7825.
Navistar IS recalling certain model year 2012-2013 ic bus ce-c, hc, and international 9400 and certain model year 2011 through 2013 international durastar, paystar, workstar, transtar, lonestar, prostar, 9200, and 9800, and certain model year 2013 international 9900, vehicles, manufactured from december 2, 2010, through january 26, 2012, and equipped with…
Risk and remedy
Risk
Unexpected continuous brake application can cause the brakes to overheat and lead to a fire. unexpected continuous brake application can cause the driver to lose control of the vehicle, increasing the risk of a crash. also, the brakes may be applied without illuminating the brake lights, failing to give proper warning to other drivers.
Remedy
Navistar will notify owners, and dealers will provide a temporary repair until bendix develops a permanent remedy. this service will be performed free of charge. The safety recall began on april 10, 2012. owners may contact navistar at 1-800-448-7825.
Navistar IS recalling certain model year 2010-2012 paystar, workstar, transtar, and prostar commercial trucks manufactured from june 1, 2009, through may 31, 2011, equipped with a maxxforce 11 or 13 engine (feature code 12uxj or 12uxh) and with alternator feature code 08ggn, 08ggr, 08 ghg, or 08ghh. the alternator cable may rub on the high pressure power…
Risk and remedy
Risk
An electrical short may cause a vehicle fire possibly resulting in property damage, personal injury, or death.
Remedy
Navistar will install a bracket to route the wires away from the power steering hose. navistar did not provide an expected start date for the recall, but an interim notice will be mailed to owners if parts will not be available until after october 14, 2011. owners may contact navistar at 1-800-448-7825. this recall campaign has been superseded by 12v-196.
Navistar IS recall certain model year 2011 and 2012 international durastar, paystar, workstar, transtar, lonestar and prostar commercial trucks manufactured from november 5, 2010, through march 10, 2011, for failing to comply with federal motor vehicle safety standard no. 121, "air brake systems (ABS)." the trailer ABS fault indicator lamp in the…
Risk and remedy
Risk
An inoperable trailer ABS fault indicator may prevent the driver from being aware of a trailer ABS fault condition thereby possibly increasing the risk of a crash potentially resulting in property damage, personal injury, or death.
Remedy
Navistar will notify owners. dealers will reprogram or replace the brake system electronic control unit free of charge. the safety recall began on may 12, 2011. owners may contact navistar at 1-800-448-7825.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010428This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean.
- 10251414Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine.
- 10251409Suggested alignment target values when performing a vehicle axle alignment.
- 10246231J1939 Data Link Source Address Information
- 10244926Rebuilding Cylinder Heads on Certain MaxxForce 11/13, N13, and A26 engines; 2010 to present.
- 10243610How to request a horsepower quote; all International and Cummins engines
- 10243596General Wheel Speed Sensor Troubleshooting
- 10243595Diagnosis of chassis wander complaints.
- 10241555J1939 Data Link Source Address Information
- 10241554J1939 Data Link Troubleshooting
- 10237468New air compressor incorporates an oil feed dowel O-ring. Only models equipped with 2010 and newer MaxxForce 11/13 engines, all N13, and A26 engines
- 10234000Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles equipped with PSI engines or Cummins ISB engine with Allison transmissions
- 10227455J1939 Data link source address information
- 10222490Pico Scope CCOS (Crankcase Separator Test)
- 10219330PicoScope Test One Channel RCT
- 10219328PicoScope Wheel Speed Sensor Test
- 10219325PicoScope Test Resistance and Ohmmeter
- 10219319PicoScope Test for Datalink (CAN) Health Shorts & opens
- 10219314PicoScope Test - Battery Loss of Charge - Parasitic Draw Test
- 10219307PicoScope Test 5V & 12V Intermittent Open and Short circuit diagnostics
- 10204139Power Steering Diagnostics Flow / Pressure Specifications For Power Steering Gears and Power Steering Pumps
- 10201760Oil leaks at the Bottom of the Oil Filter Module; Only International A26, N13, or 2010 and newer 11 and 13 engines
- 10201758Engine Oil Capacities. All International electronic engines 1994 to present and Cummins ISB, ISM, or ISX engines
- 10199915General wheel speed sensor troubleshooting
- 10198708Aftertreatment Clamp Corrosion; Single Can Aftertreatment Systems
- 10189743Suggested alignment target values when performing a vehicle axle alignment
- 10185108ECM Calibration for DPF Replacement; only trucks and busses built with 2007- 2009 MaxxForce DT/9/10. 2010-2012 MaxxForce DT/9/10, 2007-2009 MaxxForce V8, 2008-2009 MaxxForce 11/13 engines
- 10179294Driveline Information Center and Troubleshooting Procedures
- 10179289Repair Procedures for Vehicles Struck by Lightning
- 10177875MaxxForce 15L Engine Oil Leaks; an aid in repairing engine oil leaks on the MaxxForce 15L engine.
- 10177870Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics
- 10177096A/C Refrigerant and Oil Capacities
- 10173025Cleaning and Disinfecting Trucks and Buses
- 10172045J1939 Data Link Troubleshooting
- 10168652Stand Alone Real Time (SART) Module Diagnostics. Only 2010 and later models equipped with MaxxForce 11/13/15 engines or N13 with feature 0508051
- 10167658Voltage gauge and or all cluster gauges freeze
- 10167655The Doser tube coolant return hose assemblies and coolant hoses have been found to leak.
- 10167612Clutch Service Information; only models with Hydraulic Clutch Systems
- 10166344Mirror Repair Procedures and Replacement Parts Availability
- 10166335Deaeration Tank Hose Re-Route Engine Parameter Download Instructions
Every International Paystar model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.