1982 International Harvester 1925
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › International Harvester › 1925 › 1982
These records cover every 1982 International Harvester 1925. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 1982 International Harvester 1925. Newest first.
The axle housings were manufactured with a tight friction weld curl radius on the inside diameter of the axle housing. Under operational loads, cracks can initiate at the weld curl radius on the inside of the housing. These cracks may propagate, eventually allowing the axle spindle to separate from the axle housing.
Risk and remedy
Risk
Separation of the axle spindle from the axle housing can result in loss of vehicle control and a possible accident.
Remedy
Dealers will replace the rear axle housing with a new housing.
The saginaw gear does not relieve pressure when the wheels have been turned fully against the axle stops. The resulting continued pressure on the steering system can result in the development of cracks in the splines of the pitman shaft, which can develop into a complete fracture of the pitman shaft.
Risk and remedy
Risk
Fracture of the pitman shaft causes complete loss ofsteering control, which could result in a vehicle accident if fracture occurswhile vehicle IS in motion.
Remedy
Replace the existing pitman shaft in the steering gear assembly with a new, strengthened pitman shaft.
Every International Harvester 1925 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.