2025 Jeep Grand Wagoneer
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Jeep › Grand Wagoneer › 2025
These records cover every 2025 Jeep Grand Wagoneer. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2025 Jeep Grand Wagoneer. Newest first.
Chrysler (FCA US, LLC) is recalling certain 2022-2025 Jeep Wagoneer, 2022-2026 Jeep Grand Wagoneer, 2023-2025 Jeep Wagoneer L, and 2023-2026 Jeep Grand Wagoneer L vehicles. The pivot bolts for the roof rack crossbars may not have been tightened properly, allowing them to detach.
Risk and remedy
Risk
Detached roof rack crossbars can create a road hazard, increasing the risk of a crash.
Remedy
Dealers will replace the roof rack crossbar pivot bolts, free of charge. Interim notification letters, notifying owners of the safety risk, are expected to be mailed October 8, 2026. A second notice will be sent once the final remedy is available. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is 81D. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on September 17, 2026.
Chrysler (FCA US LLC) is recalling certain 2024-2025 Jeep Wagoneer, 2024-2026 Jeep Grand Cherokee, Jeep Grand Cherokee L, Jeep Grand Cherokee 4XE, Jeep Grand Wagoneer, 2025 Jeep Wagoneer L, 2025-2026 Jeep Grand Wagoneer L, and 2026 Jeep Cherokee vehicles. Due to a software error, the tire pressure monitoring system may fail to detect low tire pressure…
Risk and remedy
Risk
A TPMS warning light that fails to notify the driver of low tire pressure increases the risk of a crash.
Remedy
Dealers will update the radio frequency hub software, free of charge. Owner notification letters were mailed beginning September 17, 2026. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 54D. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on September 9, 2026.
Chrysler (FCA US, LLC) is recalling certain 2022-2025 Jeep Wagoneer and Jeep Grand Wagoneer vehicles. The trim on the driver and passenger doors may not have been installed properly, which can allow it to detach.
Risk and remedy
Risk
Detached trim pieces can create a road hazard for other vehicles, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the door trim, as necessary, free of charge. Owner notification letters were mailed September 25, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 77C. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning September 18, 2025.
Owner complaints
3 complaints
What owners report most
Latest complaints
- Seats
The contact owns a 2025 Jeep Grand Wagoneer. The contact stated that while the vehicle was parked, her grandson was exiting the vehicle from the second row of seats on the driver's side, he accidentally activated the fold-down feature of the seat. The seat folded over and trapped the child's head…
The contact owns a 2025 Jeep Grand Wagoneer. The contact stated that while the vehicle was parked, her grandson was exiting the vehicle from the second row of seats on the driver's side, he accidentally activated the fold-down feature of the seat. The seat folded over and trapped the child's head between the seat and a TV screen located on the back of the driver's seat. The contact stated that the seat stopped folding when it encountered resistance from the child's body. The contact manually pulled the seat back off the child's back. The contact stated that the child was shaken up but not hurt. The manufacturer was not informed of the failure. The failure mileage was approximately 8,000.
- Electrical system · Unknown or other
Rear climate control system fails to provide cooled air to the second and third rows during normal vehicle operation. Front vents produce cold air while rear vents blow warm to hot air despite temperature settings at minimum, high fan speed, and recirculation enabled. The condition has been…
Rear climate control system fails to provide cooled air to the second and third rows during normal vehicle operation. Front vents produce cold air while rear vents blow warm to hot air despite temperature settings at minimum, high fan speed, and recirculation enabled. The condition has been present since vehicle delivery and has persisted despite three repair attempts by an authorized dealership. The problem has been reproducible under both driving and idle conditions. Independent measurements using a probe-based temperature instrument inserted into the vents confirm a significant difference between front and rear discharge temperatures. After approximately 25 minutes of driving in moderate weather (about 72°F ambient), front vents measured approximately 42–44°F while second and third row vents remained approximately 72–86°F. In warmer conditions, rear vent temperatures have exceeded 90°F. Adjusting the front climate control to a normal comfort setting causes rear temperatures to rise further even when rear controls remain set to maximum cooling. The vehicle is a three-row family SUV. The failure exposes rear passengers, including a toddler in a rear-facing car seat, to elevated temperatures during normal driving, particularly in hot and humid southern Louisiana conditions. Young toddlers are more vulnerable to heat exposure and cannot easily regulate internal body temperatures themselves, increasing safety concerns. The defect substantially limits safe and practical use of rear seating areas and remains unresolved despite repeated service attempts. No warning indicators are provided to the driver that rear cooling is inadequate. The condition reduces the vehicle’s ability to safely transport passengers in rear seating positions during hot weather. The vehicle manufacturer, Stellantis N.V., has been formally notified of the condition and is aware of the issue.
- Electrical system · Forward collision avoidance › Automatic emergency braking · Lane departure › Blind spot detection
I purchased this vehicle 04/15/2025. Starting at less than 500 miles the Blind Spot Indicator Warning Lights along with the ABS Braking System Warning Lights randomly come on while driving. To receive random warning light notices and sounds while driving is extremely startling and concerning. I…
I purchased this vehicle 04/15/2025. Starting at less than 500 miles the Blind Spot Indicator Warning Lights along with the ABS Braking System Warning Lights randomly come on while driving. To receive random warning light notices and sounds while driving is extremely startling and concerning. I have taken the vehicle to the dealership multiple times with no success of fixing the issue. They have been in touch with Chrysler’s engineers. The engineers have given instructions such as inspecting the electrical system, replacing the main module and software updates all of which have not corrected the problem. The vehicle is still at the dealership with no resolution. Apparently, these issues have been reported before not only for the Jeep Grand Wagoneer but other Chrysler vehicles as well. As a loyal Jeep customer, I purchased this vehicle because of the safety features advertised. However, it has become a nightmare and I do not feel safe driving in this vehicle at all. Please research these safety concerns.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011148Module - transfer case control
- 11010752Service Air Suspension Message In Cluster. Ride Height Sensor and System Performance Diagnostic Trouble Code(s) (DTCs) In Below Freezing Temperatures.
- 11010751Click Or Clicking Noise From Under Hood Near The Fast Down Leveling Valve.
- 11010749Power Liftgate Is Inoperative or Wont Close.
- 11010743"Instrument Panel Cluster (IPC) message Night Vision Unavailable Service Required or Loss of Night Vision "
- 11010695SHIFTER The service shifter message comes on in the cluster and the lever gets stuck in park "P" and it can be present the follwoing DTC: - U11E3 - TCM Lost communication with ESM on D-PT CAN - U0103 - Lost communication with Electric Gear Shift Module - U0101- Lost communication with DTCM - U0418 - Implausible Data Received From Brake System Control Module - U0402 - Implausible data received from TCM **NOTE: Prior any shifter replacement Refer to TSB-4582 2024-2025 WS - Valve Body Replacement. Recomended Diagnosis procedure: 1. Confirm if U0101 -Lost Communication with TCM or U0418 -Implausible Data Received From Brake System Control Module are present, if so check the Valve Body CAN Terminals any corrosion. 2. Check the wiring connectors between the ESM and the TCM and check voltage. 3. Check the pin header for the ESM for any bent pins. 4. If wiring and voltage are good and the DTCs (U11E3 - TCM Lost communication with ESM on D-PT CAN & U0103 - Lost communication with Electric Gear Shift Module) are still present, erase them with the scan tool. Reset ECU. 5. if DTCs for loss communication are still active at the ESM and you are still unable to shift then replace the Shifter module.
- 11010511Tire Pressure Monitor (TPM) Service Information. TPM Lamp On.
- 11010497Buzz Squeak Rattle From Right Rear Headliner Area.
- 11010200Carrier planetary & shaft kit - output
- 11009607Bracket - Fender Mounting
- 11009580Valve body & control unit - transmission
- 11008870Service Electric Power Steering (EPS) Message Displayed on Cluster Upon Start Up
- 11008435Blind Spot Warning Message Displayed on the Cluster
- 11008328Customer Complaint Of Loss Of Power Steering Assist.
- 11008145Door Ajar Light On With Door(s) Closed.
- 11007954Battery Drain Suspected or "Identified" From USB or Media Hub
- 11007201TRANSFER CASE Before replacing a transfer case unit for fault codes C1444-98 and/or C1477-4B, be sure to reference TSB 21-048-24 for potential transfer case shift motor replacement
- 11006884Bezel - door handle
- 11006696MIL On/Check Engine Lamp On, Engine May Run Rough
- 11006236Cluster and Radio Display Settings Revert Back to Default Settings, Auto Door Locks and Paddle Shifter Inoperative With No Menu to Enable, Pedestrian Emergency Brake (PEB) Lamp and Forward Collision Warning (FCW) Lamp on After a Recent Service Repair no Diagnostic Trouble Codes (DTCs)
- 11006221After Radio Software Update, Pedestrian Emergency Brake (PEB) Lamp and Forward Collision Warning (FCW) Lamp on in Cluster or Other Customer Programable Features Concerns Not Set, No Diagnostic Trouble Codes (DTCs)
- 11005356Carrier planetary & shaft kit - output
- 11005207Different Cluster Displays Have a Reduced View While in Analog Mode, Darkened Sides
- 11003281Seat Control Module 3RD ROW SEAT WILL NOT CLOSE FULLY DOWN CUSTOMER STATES THE PASSENGER SIDE 3RD ROW WILL NOT CLOSE FULLY DOWN Steps for Tech: Before recalibrating 3rd row see please follow below mentioned steps first. -Turn off vehicle for 2 minute and then turn on vehicle and press 3rd row seat switch 2 times - Seat will start moving and relearn its correct hard stops and parameters. -Seat will recalibrate itself with updated SW.
- 11002828"Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On "
- 11002531Drained Battery, Low System Voltage, Battery Not Charging, High System Voltage
- 11002528The Electronic Vehicle Information Center (EVIC) Displays Park Assist System Disabled Message
- 11002024Rain Sensing Auto Wipers and Auto on Head Lamps Inoperative
- 11000173Receiver - passive entry
Every Jeep Grand Wagoneer model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.