2014 Kenworth T270
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Kenworth › T270 › 2014
These records cover every 2014 Kenworth T270. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2014 Kenworth T270. Newest first.
PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power…
Risk and remedy
Risk
If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Remedy
PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.
PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.
Risk and remedy
Risk
As water leaks in, the wiper may cease to function on the 'intermittent' setting, reducing the driver's visibility and increasing the risk of a crash. Additionally, the water may cause corrosion which, over time, may result in an electrical short, increasing the risk of a fire.
Remedy
PACCAR is still developing and testing a remedy. The recall is expected to begin in July 2015. An interim letter was sent to owners on July 2, 2015. The recall began on September 2, 1015. Owners may contact Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is 15KWF.
PACCAR Incorporated (PACCAR) is recalling certain model year 2014 Kenworth T660, T680, T700,T800, T880, W900, T440, T470, T370, T270, T170, C500, and C550 chassis manufactured between August 7, 2013, and October 31, 2013, and Peterbilt 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, and 587 chassis manufactured between August 7, 2013, and…
Risk and remedy
Risk
If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.
Remedy
PACCAR will notify owners, and dealers will inspect and replace the seat belt buckles, as necessary, free of charge. The recall began on March 31, 2014. Owners may contact PACCAR at 1-425-468-7400. Kenworth's number for this campaign is 14KWC. Peterbilt's number for this campaign is 114-B.
PACCAR Incorporated (Paccar) is recalling certain model year 2014 Kenworth T170, T270, T370, T440, T470, T660, T680, T700, T800, T880, C500 and W900 trucks manufactured July 1, 2013 through September 17, 2013. In the affected vehicles, the plastic housing of the Stop/Tail/Turn (STT) lamp can shrink and allow the light bulb to fall out of the mounted…
Risk and remedy
Risk
If the stop/tail/turn light is not illuminated, the driver's intentions would not be communicated, which increases the risk of a crash.
Remedy
Kenworth will notify owners, and dealers will replace the defective STT lamps with new lamps. The recall began on February 4, 2014. Customers may contact Paccar at 1-425-468-7400. Kenworth's number for this recall is 13KWM.
PACCAR is recalling certain model year 2014 Kenworth T170, T270, T370, T470, T660, T680, T800, T880, and W900 trucks manufactured May 6, 2013, through May 17, 2013; and model year 2014 Peterbilt 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, 389K, 567, 579 and 587 trucks manufactured May 1, 2013 through May 17, 2013. An internal defect in the ignition…
Risk and remedy
Risk
Unintended engine startup could cause injury to a person working in the engine compartment. Vehicles with standard transmissions may experience unexpected movement, which may result in personal injury or a crash.
Remedy
PACCAR will notify owners, and dealers will replace affected ignition switches, free of charge. The recall began on June 14, 2013. Owners may contact Kenworth at 1-425-828-5000 or Peterbilt at 1-940-591-4000. Kenworth's recall campaign number is 13KWF. Peterbilt's recall campaign number is 0513-E.
PACCAR is recalling certain model year 2014 Kenworth T270 and T370 trucks, manufactured from January 31, 2013, through February 4, 2013. The left hand seat belt floor pan reinforcement bracket was not positioned correctly during assembly. This could result in the failure of the seat belt anchor mounting.
Risk and remedy
Risk
In the event of a crash, the failure in the seat belt anchor may increase the risk of injury.
Remedy
PACCAR will notify owners, and dealers will remove, reposition, and reinstall the reinforcement bracket free of charge. The recall began on April 15, 2013. Owners may contact Kenworth at 1-425-828-5000.
Owner complaints
1 complaints
Latest complaints
- Tires
Tire sidewall separation. Multiple tires. regul gl283a 245/70r19.5 guizhou tyre corp
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10188550Information Only Windshield washer pumps have a high No Trouble Found rate. Washer pumps may fail to spray due to a clogged filter.
- 10185190Fix-As-Fail - Prior versions of Eaton Endurant transmission software may be prone to setting Linear Clutch Actuator (LCA) fault codes leading to possible LCA hardware replacement.
- 10177021Information Only: This bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplete information.
- 10173212Information Only Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
- 10173205Information Only: Proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
- 10172038Fix-As-Fail: The cruise control may be inoperative after installing CECU software version P30-1030-118 if the vehicle was manufactured without an air pressure sensor. Until the software is revised to address this issue, a pressure sensor must be installed
- 10169787Information Only - Vehicles built with NAMUX software from 2013 to present may experience accuracy issues with the tachometer. The issue can be temporarily resolved using any one of the included procedures.
- 10168703Information Only: This bulletin provides guidance for repairing an air-conditioning system after internal failure of the A/C compressor.
- 10165583Information Only This bulletin provides information about the California Air Resources Board (CARB) Periodic Smoke Inspection Program (PSIP) and Heavy Duty Vehicle Inspection Program (HDVIP).
- 10128646Fix-As-Fail ? There is an updated plug to fix leaking steer axle hubcaps.
- 10128643Fix-As-Fail ? There is an updated plug to fix leaking steer axle hubcaps.
- 10056024Kenworth: see document search button for owner letter. A max governed cc speed, on some trucks, was programmed incorrectly and limits maximum default speed to 63 mph.
Every Kenworth T270 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.