2018 Kenworth T680
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Kenworth › T680 › 2018
These records cover every 2018 Kenworth T680. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
15 recalls name the 2018 Kenworth T680. Newest first.
PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air…
Risk and remedy
Risk
Insufficient air volume can reduce braking performance and increase the risk of a crash.
Remedy
Dealers will install the correct volume air tanks, free of charge. Owner notification letters were mailed August 12, 2024. Additional owner notification letters were mailed October 27, 2025. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 24KWD.
PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.
Risk and remedy
Risk
Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.
Remedy
Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.
PACCAR Incorporated (PACCAR) is recalling certain 2016-2022 Peterbilt 567, 579, 2021-2022 Peterbilt 536, 2017-2021 Kenworth T880, 2016-2022 Kenworth T680, 2018-2020 Kenworth T440, 2020 Kenworth T270, and 2021 Kenworth T280 vehicles. The methane detection system will not function if the system loses power.
Risk and remedy
Risk
The operator may be unaware of a system malfunction or the presence of excessive methane levels, increasing the risk of injury or fire.
Remedy
Dealers will re-wire the warning alarm, free of charge. Owner notification letters were mailed December 1, 2022. Owners may contact Peterbilt customer service at 1-940-591-4220, and Kenworth customer service at 1-425-828-5888. PACCAR's numbers for this recall are 21KWH and 21PBN.
PACCAR Incorporated (PACCAR) is recalling certain 2016-2021 Kenworth T680 trucks equipped with a 2.1m Cab and WABCO 6S/6M ABS brake system with drum brakes. The brake systems were manufactured with a standard rear-brake ABS modulator valve instead of a quick release valve, which may exceed the intended service-brake release timing. As such, these vehicles…
Risk and remedy
Risk
Longer than expected service-brake release timing may lengthen vehicle stopping distance, increasing the risk of a crash.
Remedy
PACCAR will notify owners, and dealers will replace the standard rear-brake, ABS modulator valve with a quick release valve, free of charge. The recall began November 30, 2020. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 20KWD.
PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power…
Risk and remedy
Risk
If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Remedy
PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.
PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 T680 and T880 tandem axle vehicles equipped with a parking brake on a single axle and certain models of automated manual transmissions. During cold temperatures, the signal from the park brake pressure switch to the transmission controller may be delayed possibly resulting in the vehicle moving…
Risk and remedy
Risk
Unexpected vehicle movement may increase the risk of a crash or injury.
Remedy
PACCAR will notify owners and dealers will replace the park brake pressure switch, free of charge. PACCAR issued owners and interim notification on June 3, 2019. The recall began August 6, 2019. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR's number for this recall is 19KWB.
PACCAR Incorporated (PACCAR) is recalling certain 2018-2019 Peterbilt 337, 348, 365, 367, 389, 567, 579 and 587 trucks and 2018-2019 Kenworth C500, T270, T370, T440, T660, T680, T800, T880 and W900 trucks equipped with automated manual transmissions. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.
Risk and remedy
Risk
Unintended movement of a vehicle can increase the risk of a crash.
Remedy
PACCAR will notify owners, and dealers will update the transmission control module, free of charge. The recall began February 23, 2019. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's numbers for this recall are 18PBE and 18KWH.
PACCAR Incorporated (PACCAR) is recalling certain 2018 Kenworth T680 and T880, and Peterbilt 567 and 579 trucks. The seat belt buckle assemblies on these vehicles may have been glued and not sewn during manufacturing, possibly causing the assembly to come apart under load, such as in the event of a crash.
Risk and remedy
Risk
If the seat belt buckle assembly separates, it can prevent the occupant from being properly restrained in the event of a crash, increasing the risk of a crash.
Remedy
PACCAR will notify owners, and dealers will replace the seat belt buckle assemblies that were not sewn, free of charge. PACCAR issued owners an interim notification on February 4, 2019. The recall began February 28, 2019. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR's numbers for this recall is 18KWG, and 18PBD.
PACCAR Incorporated (PACCAR) is recalling certain 2013-2019 Kenworth T680 and T880 and Peterbilt 579 trucks, greater than 30 feet long and equipped with side extender mounted intermediate marker lamp/turn signals that do not include a reflex reflector. Since both intermediate side marker lamps and reflex reflectors are required, these vehicles fail to…
Risk and remedy
Risk
Missing reflex reflectors can reduce the vehicle's visibility to other drivers, increasing the risk of a crash.
Remedy
PACCAR will notify owners and dealers will install reflex reflective tape, free of charge. The recall began January 15, 2019. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR's number for this recall is 18KWF, and 18PBC.
PACCAR Incorporated (PACCAR) is recalling certain 2017-2019 Kenworth C500, T600, T660, T680, T800, T880 and W900 trucks, as well as Peterbilt 367, 386, 389, 567, 579 and 587 trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit…
Risk and remedy
Risk
If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.
Remedy
Cummins will notify owners, and dealers will replace the suspect fuel pump cooling circuit screen, free of charge. The recall began November 21, 2018. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's number for this recall is 18E081.
PACCAR Incorporated (PACCAR) is recalling certain 2017-2018 Peterbilt 567 and 579 trucks and 2015-2018 Kenworth T660, T680, T800, T880 and W900 trucks. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As…
Risk and remedy
Risk
If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Remedy
PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on July 30, 2018. Owners may contact Peterbilt customer service at 1-918-259-3258 or Kenworth customer service at 1-425-828-5000.
PACCAR Incorporated (PACCAR) is recalling certain 2017-2018 Kenworth T680 and T880 trucks, and Peterbilt 567 and 579 trucks, all equipped with an automated Eaton UltraShift Plus or Eaton Advantage Transmission with right hand stalk shifter. The display that indicates which transmission gear the driver selected may display incorrectly. The display can…
Risk and remedy
Risk
A truck that does not move as expected can increase the risk of a crash.
Remedy
PACCAR will notify owners, and dealers will install a transmission software update, free of charge. The recall began on March 9, 2018. Owners may contact Kenworth customer service at 1-425-828-5000 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall is 18KWA and 118-A.
PACCAR Incorporated (PACCAR) is recalling certain 2018 Peterbilt 567, 579, Kenworth T680, and T880 trucks, equipped with certain Eaton Endurant and PACCAR AMT transmissions. The transmission control module (TCM) may allow the engine to crank briefly even if the transmission shifter is not in neutral. As such, these vehicles fail to comply with the…
Risk and remedy
Risk
If the transmission is not in neutral when the engine begins running, there may be unintended vehicle movement, increasing the risk of a crash.
Remedy
PACCAR will notify owners, and dealers will update the TCM software, free of charge. The recall began February 6, 2018. Owners may contact Peterbilt customer service at 1-940-591-4000, or Kenworth customer service at 1-425-828-5000. PACCAR's numbers for this recall are 1217F and 1717KWF.
PACCAR Incorporated (PACCAR) is recalling certain 2017-2018 Peterbilt 367, 389, 567, 579 and 587 trucks, and 2018 Kenworth C500, T680, T800, T880 and W900 trucks equipped with Cummins ISX 15L engines. These engines have a fuel pump whose drive gear could possibly slip on its drive shaft, causing a fuel pump function loss, resulting in an engine stall.
Risk and remedy
Risk
An engine stall can increase the risk of a crash.
Remedy
Cummins will notify the vehicle purchaser, and Cummins dealers will replace the fuel pumps, free of charge. The recall began July 1, 2017. Owners may contact Cummins customer service at 1-800-286-6467 or PACCAR customer service at 1-425-468-7400. PACCAR's number for this recall is C1909.
PACCAR Incorporated (PACCAR) is recalling certain 2015-2018 Kenworth K370, T680, T880 and 2017-2018 Peterbilt 567 and 579 trucks. The plastic fuel tee fittings on these trucks may leak fuel.
Risk and remedy
Risk
A fuel leak in the presence of an ignition source can increase the risk of a fire.
Remedy
Kenworth and Peterbilt will notify owners, and dealers will replace the suspect fuel tees, free of charge. The recall began on April 13, 2017. Owners may contact Kenworth customer service at 1-425-828-5000 and Peterbilt customer service at 1-940-591-4000. PACCAR's numbers for this recall is 17KWA and 217-A.
Owner complaints
11 complaints1 involved a crash1 involved a fire
What owners report most
Latest complaints
- Tires
See attached document for complaint.
- Electrical system · Engine · Power train
We bought this truck with 401, 000 miles on it. So far we have had to replace the rear ends twice. the whole DPF system, the check engine light still on since the day we bought the truck. We have had 5 NOS sensors put into the truck, 6 input and output sensors put into the truck. This truck has…
We bought this truck with 401, 000 miles on it. So far we have had to replace the rear ends twice. the whole DPF system, the check engine light still on since the day we bought the truck. We have had 5 NOS sensors put into the truck, 6 input and output sensors put into the truck. This truck has been defective since the day of purchase. We keep having the same error code of p3770 come up evetime we take to shop. The error code has been looked at so many times that even the master techs don't know what is wrong with the truck other then we keep replacing the same stuff over and over again.
- Service brakes
The air dryer bracket part number G11-6218 was craked and because of that it wasn't secured to the frame. The air dryer was hanging on the airline with the piece of the broken bracket. It is not secured. That is extremely unsafe because it could brake airlines and trucks would lose its brakes.
- Seat belts · Seats · Visibility/wiper
Seat belt frame cover was cracked and seat belt would not retract. The other side was broken as well with casing coming off. I was in the middle of backing for a delivery and the driver seat retract would not stay in place and the seat kept folding forward causing me to not be able to back the…
Seat belt frame cover was cracked and seat belt would not retract. The other side was broken as well with casing coming off. I was in the middle of backing for a delivery and the driver seat retract would not stay in place and the seat kept folding forward causing me to not be able to back the truck. I was told this is due to obese drivers causing the seat to break. Also during the time of my brake issue where are the brakes locked up and on several other occasions the air brake lost pressure for no reason.
- Forward collision avoidance › Adaptive cruise control · Service brakes · Unknown or other
I started the truck after not driving for 1 day and a heavy rain storm the day prior. I attempted to drive bobtail when the brakes locked up. The traction control light came on then went back off. Then the adaptive cruise control notification came on. The regon came on then went back off. A…
I started the truck after not driving for 1 day and a heavy rain storm the day prior. I attempted to drive bobtail when the brakes locked up. The traction control light came on then went back off. Then the adaptive cruise control notification came on. The regon came on then went back off. A speedometer sign with an exclamation mark came up and would not go away. After attempting to go down the road the brakes continued to lock up, would not release and caused the rear passenger tires to go bald and lose my job.
- Forward collision avoidance › Automatic emergency braking
Automatic emergency braking IS an absolute danger to the motoring public and needs to be eliminated immediately. I am sick and tired of engineer's who don't know their ass from a hole in the ground designing bullshit that doesn't work. Far too many false radar returns and unwanted hard stops to be…
Automatic emergency braking IS an absolute danger to the motoring public and needs to be eliminated immediately. I am sick and tired of engineer's who don't know their ass from a hole in the ground designing bullshit that doesn't work. Far too many false radar returns and unwanted hard stops to be of any use. I do not own this vehicle but if I did the first thing I would do right after I pull the fuse for the lane departure warning would be to isolate and bypass aeb. This will be done on any vehicles I purchase in the future and I do not care what the law states about doing so
- Power train
Unit had clutch failure failed to disengage under 18e-102, per federal guidlines it falls under the clutch range of au1704192065 and falls under eatons original campaign release but they revised it to where it does not cover this one becuase now they changed the range to au1711 thru au1804 but we…
Unit had clutch failure failed to disengage under 18e-102, per federal guidlines it falls under the clutch range of au1704192065 and falls under eatons original campaign release but they revised it to where it does not cover this one becuase now they changed the range to au1711 thru au1804 but we are seeing a lot of failure below au1711, why does eatons document not match the federal documents? and why are we seeing these clutch failures on trucks that were revised and said to now be good, but they are failing in the same manner
- Forward collision avoidance › Adaptive cruise control
TL* the contact owns a 2018 kenworth construct T680. While driving through snow or ice, the vehicle's adaptive cruise control would flash as if the vehicle were approaching something and activated by stopping the vehicle in order to prevent a crash. The contact stated that the failure only occurred…
TL* the contact owns a 2018 kenworth construct T680. While driving through snow or ice, the vehicle's adaptive cruise control would flash as if the vehicle were approaching something and activated by stopping the vehicle in order to prevent a crash. The contact stated that the failure only occurred during this type of weather even when there were no other vehicles or objects nearby. The contact spoke with the kenworth hotline for vehicle breakdowns who stated that they did not consider this a failure. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the issue. The approximate failure mileage was 292,000.
- Service brakes
Unit driving on flat road, left front drives started smoking while driving on interstate brakes not being applied, driver stopped and by this time the fire had spread thru the under side of truck and trailer, total loss of truck, trailer and load, belived to be haldex brake can failure leaking air and causing brakes to drag and start on fire
- Seat belts
Seat belt alarm never turn off even if I have my seat belt on
- Service brakes
The mitigation system causes a 'hard braking' event to occur. Can be triggered by an overpass, construction zones, truck in another lane, etc. Usually occurs on highways while at our top speed of 65 mph. It will cause a hard brake down to 45 mph. Can occur during night or daytime.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Haldex Brake Chamber Failures
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation (PE21018) based on eleven Vehicle Owner Questionnaires (VOQ). These VOQs included seven wheel-end fires on various Kenworth and Peterbilt trucks.Several of the VOQs were submitted by a maintenance facility stating that the fires were due to…
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation (PE21018) based on eleven Vehicle Owner Questionnaires (VOQ). These VOQs included seven wheel-end fires on various Kenworth and Peterbilt trucks.Several of the VOQs were submitted by a maintenance facility stating that the fires were due to power spring fractures within brake chambers manufactured by Haldex Commercial Vehicle Systems (Haldex). According to the reports, the fractured spring punctured the brake chamber diaphragm, resulting in a partial loss of compressed air to the park brakes, causing the brakes to drag and overheat. ODI sent an information request letter to Haldex on August 3, 2021. On October 17, 2021, Haldex submitted a complete response. In this investigation, ODI analyzed thousands of warranty claims as well as fleet reports of brake chamber replacements. ODI gathered information from multiple vehicle manufacturers and reviewed legal testimony alleging defects and laboratory reports that raised concerns about spring failures initiated by corrosion. ODI found that spring failures were often detectable as soon as they occurred. In the subject incidents, after detecting the failures, some operators continued driving to a maintenance facility rather than stopping and waiting for a mobile technician to address the issue, increasing the risk of fire. While over twenty entities purchased the subject component from Haldex, the VOQs that ODI received involved only PACCAR vehicles. Haldex completed replacement campaigns for several fleets operating PACCAR vehicles, reducing the risk of further failures. Brake chambers have a limited service life. Industry guidance generally recommends replacement every two to four years depending on operating conditions, with some manufacturers and fleets recommending even shorter intervals. Vehicles operating in salt-belt states—where the majority of VOQs originated—require more frequent replacement than vehicles in less corrosive environments. Haldex’s standard warranty is four years and unlimited mileage. ODI determined that the average time in service for warranty claims was 4.9 years and 260,000 miles. Currently, all of the chambers subject to this investigation are between five and ten years old. Given the absence of recent failures and because the subject components are now older than their expected service life, ODI is closing this investigation. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10254164Certain C500/T440/T470/T660/T680/T800/T880/W900 chassis may have air tank reservoirs that do not meet air volume requirements per FMVSS/CMVSS 121 Air Brake Systems. This bulletin will be updated when repair parts and procedures are available.
- 10238385Emissions Recall Certain Vehicle Model Year 2017-2019 chassis equipped with EPA2017 compliant PACCAR MX-13 engines have an EGR flex pipe that can develop cracks and leak untreated exhaust. The EGR Flex pipe will be replaced if it has a suspect part number.
- 10238382Certain chassis with Engine Model Year 2016-2021 PACCAR MX-11/MX-13, or EPA13 and EPA21 Cummins ISX12/ISX15/X15 engines that had a previously failed DEF sensor and with DEF sensor software disabled due to industry DEF sensor shortages will now be able to receive a replacement DEF sensor, DEF tank heater coolant control valve, and re-enabled DEF diagnostic software. Please note that chassis equipped with PACCAR PX engines will be eligible for this repair at a future date when software is available.
- 10238376E279: PACCAR MX-13/MX-11 Engine MY17 Software Incorrectly Sets DTC P1092 PACCAR MX-13/MX-11 Engine MY17 Software Incorrectly Sets DTC P1092 Emission Recall - PACCAR MX-13/MX-11 MY2017 software incorrectly sets DTC P1092, which could result in reduced available engine torque and/or engine protection mode. An engine software update is available that corrects the issue.
- 10232497Certain Model Year 2018 PACCAR MX-11 engines may have contaminated Crankcase Pressure Sensors. These sensors will be replaced.
- 10232496Certain Model Year 2021-2024 chassis with PACCAR MX engines and optional fuel filter restriction virtual gauge may display incorrect restriction levels. The virtual gauge will be temporarily disabled until a revised sensor strategy is developed.
- 10231101This campaign is the final opportunity to replace the oil filter screw cap to reduce occurrences of broken bypass valve tabs. Broken oil valve tabs can cause oil flow obstruction to critical engine parts, resulting in serious engine damage. Customers that do not receive this repair may be responsible for progressive engine damage caused by broken oil bypass valve tabs.
- 10225578Info Only - PACCAR is introducing Over-the-Air (OTA) software updates for engine MY17 and newer chassis equipped with Cummins X15, X12, ISX12, ISX12N, L9N, PX-7, and PX-9 engines The technology will leverage the existing Remote Diagnostic cs hardware to deliver secure software updates remotely. This will reduce downtime and save on maintenance costs for eligible vehicles.
- 10218895Kenworth is providing guidance for PACCAR MX Engine Composite Oil Pan leak troubleshooting to avoid over-repairs and to provide warrantable repair guidance. Oil leaks, if not repaired, can lead to severe engine damage.
- 10213089Safety Recall Interim Notification - The Dana D-Series front axle steer arm fasteners that attach the steer arm to the steering knuckle may fail, increasing the risk of a crash or injury. Repair information will be added when a repair procedure and parts are available.
- 10208770Due to major data carriers phasing out 3G networks, chassis currently utilizing first generation Peoplenet Mobile Gateway (PMG001) will experience severe 3G service degradation as early as January of 2022. Chassis currently utilizing 3G antennas as a primary antenna may experience this degradation
- 10206097Non-Safety Campaign: Drivers of vehicles equipped with PACCAR TX-12 transmissions may experience harsh shifts and gear grinding noise. Premature Main Drive Gear damage may occur due to clutch housing and main case countershaft bearing bore wear.
- 10206084Non-Safety Campaign: Eaton Endurant transmissions may experience premature Main Drive Gear damage due to clutch housing and main case countershaft bearing bore wear. A Clutch Housing Front Cover Kit will be installed to address the issue.
- 10203780Non-Safety Campaign - The TPMS ECU is not communicating properly with TPMS sensors. The result is a delay or failure of communication between the TPMS ECU and the TPMS sensors , causing inaccurate TPMS readings. A firmware update resolves the issue.
- 10203772Non-Safety Campaign Vehicles with a Cummins X15 engine and Horton fan drive may set Diagnostic Trouble Code (DTC) 6637 and/or 3838 due to fan speed that results in the fan remaining activated until the power is cycled. A new controller will resolve the issue.
- 10201965Fix-As-Fail Due to undersupply issues, only a limited supply of Diesel Exhaust Fluid (DEF) sensors are available. As a temporary solution, after PACCAR confirms a DEF sensor is not available, a temporary software update will allow a vehicle to continue operation with a failed DEF sensor by disabling the DEF sensor diagnostics.
- 10198762Information Only C hassis equipped with MY2021 B EPA emission s standards will be shipped through atleast the end of the 2021 calendar year without particulate matter (PM) sensors installed .
- 10198760An engine software update is required to resolve OBD system readiness, DEF doser diagnostics, and otherOBD system software related issues.
- 10194769Selected engines have been identified to receive a camshaft inspection and an update for improved camshaft lubrication.
- 10188550Information Only Windshield washer pumps have a high No Trouble Found rate. Washer pumps may fail to spray due to a clogged filter.
- 10188468Non-Safety Campaign Chassis with the City Horn option may generate unexpected alerts. A VECU software update is available to resolve the issue.
- 10188467Non-Safety Campaign The batteries may drain quickly due to the VECU not going to sleep. Updated VECU software is available to resolve the issue.
- 10186164T680 predictive cruise control(PCC) incompatibility with cummins engine.
- 10185190Fix-As-Fail - Prior versions of Eaton Endurant transmission software may be prone to setting Linear Clutch Actuator (LCA) fault codes leading to possible LCA hardware replacement.
- 10185189Non-safety campaign: Vehicles equipped with an Eaton Endurant 12 speed transmission may experience transmission service lamp activation, no gear engagement from neutral, and/or DTC 511 FMI 7 or 10 is set. Resolution is to update the transmission software and calibrations.
- 10185188Non-Safety Campaign Vehicles with PACCAR transmissions may experience transmission service lamp activation, no gear engagement from neutral, and/or DTC 511 FMI 7 or 10 is set. Transmission software and shift calibration updates are available to resolve
- 10182216Fix-As-Fail The Battery Management System (BMS) may report the incorrect battery condition. Additional diagnostics are available to correctly determine and repair the root cause of the issue.
- 10179371Fix-As-Fail The Master Switch Module (MSM) may lose dash switch memory and functionality when the battery disconnect switch is cycled. An improved MSM is available to resolve the issue.
- 10177935Fix-As-Fail - Bendix New-Gen Lightweight Steer Axle Drum Brake Spider Cracking
- 10177021Information Only: This bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplete information.
- 10173583DEF tank covers may become loose and potentially crack on vehicles built before October 2019 with DEF tank part number M86-6221-003**(TANK-DEF MEDIUM ASSY) and M86-6222-003**(TANK-DEF LARGE, ASSY). Resolution is to resolve the vibration on the tank cover by adding bottom tank washers.
- 10173212Information Only Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
- 10173205Information Only: Proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
- 10171030Information Only: The AutoStart System Test does not recognize the hood opening and closing when running the test on a model 579 or 567 chassis equipped with a VECU software version 9.8 and 9.9. The issue will be fixed on a future VECU software update. This bulletin will be updated when the resolution is available.
- 10169787Information Only - Vehicles built with NAMUX software from 2013 to present may experience accuracy issues with the tachometer. The issue can be temporarily resolved using any one of the included procedures.
- 10169706Emissions Campaign The Engine Overspeed lamp may illuminate during a smoke opacity test. A software update is available to resolve the issue.
- 10168709Fix-As-Fail The evaporator core may crack in vehicles with the ISX-15 engine. An improved suction line has been released that removes stress transferred to the evaporator core.
- 10168703Information Only: This bulletin provides guidance for repairing an air-conditioning system after internal failure of the A/C compressor.
- 10165583Information Only This bulletin provides information about the California Air Resources Board (CARB) Periodic Smoke Inspection Program (PSIP) and Heavy Duty Vehicle Inspection Program (HDVIP).
- 10164403MY2018 QV/VV Retrofit
Every Kenworth T680 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.