2019 Keystone Raptor
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Keystone › Raptor › 2019
These records cover every 2019 Keystone Raptor. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2019 Keystone Raptor. Newest first.
Keystone RV Company (Keystone) is recalling certain 2019-2020 Keystone Carbon, Cougar, Fuzion, Impact and Raptor fifth-wheel trailers equipped with a Furrion over the air (OTA) wing-style television antenna. The antenna may separate from the mounting base during transit, becoming a road hazard.
Risk and remedy
Risk
If the antenna detaches from the trailer while moving it may become a road hazard, increasing the risk of a crash.
Remedy
Keystone will notify owners, and dealers will replace the Furrion wing-style antenna with a Winegard dome-style antenna, free of charge. The recall began August 27, 2020. Owners may contact Keystone customer service at 1-866-425-4369. Keystone's number for this recall is 20-381.
Keystone RV Company (Keystone) is recalling certain 2018-2019 Keystone Raptor recreational trailers. The quick disconnect rubber propane line may be incorrectly routed, allowing the outside grill to be stored while the fuel supply is still on and the flame is still lit.
Risk and remedy
Risk
If the grill is stored while the flame is still lit, it can increase the risk of a fire.
Remedy
Keystone has notified owners, and dealers will replace the quick disconnect rubber propane line with a line that must be disconnected prior to storing the grill, free of charge. The recall began on January 14, 2019. Owners may contact Keystone customer service at 1-866-425-4369. Keystone's number for this recall is 19-343.
Keystone RV (Keystone) is recalling certain 2018-2019 Keystone Raptor recreational trailers, model 353TS. The tires may rub against the frame outrigger while being towed.
Risk and remedy
Risk
Tire contact with the frame outrigger may result in tire damage and can affect vehicle handling, increasing the risk of a crash.
Remedy
Keystone has notified owners, and dealers will cut a notch into the frame outrigger that will provide clearance between the frame and tire, free of charge. The recall began November 20, 2018. Owners may contact Keystone customer service at 1-866-425-4369. Keystone's number for this recall is 18-339.
Owner complaints
2 complaints
What owners report most
Latest complaints
- Equipment › Recreational vehicle/trailer · Structure › Body · Unknown or other
Component failed: while traveling at 65 mph on [XXX] the black tank (waste tank) fell from its mounting brackets and hitting the road way. At the time approximately 10 gallons on clean water was in the tank. No warning or way to know it dislodged from its brackets. I was flagged down by a passing…
Component failed: while traveling at 65 mph on [XXX] the black tank (waste tank) fell from its mounting brackets and hitting the road way. At the time approximately 10 gallons on clean water was in the tank. No warning or way to know it dislodged from its brackets. I was flagged down by a passing motorist. How was your safety at risk: Routed under the waste tank there are approximately 12 power wires, generator fuel lines (connect to 30 gallon fuel tank) and propane lines. (120 gallons), When i came to a stop and surveyed the damage along side the road, i realized my generator was running, caused by arching/shorting wires. I had numerous hot wires sparking and arching. the tank fell forward out of its mounts and the front was dragging on the road way along with the underbelly insulation. The generator fuel lines were loose and pulled from their mounts, but fortunately were not leaking. After the vehicle was safely secured and removed from the roadside, it was taken to a Keystone dealer in Saco, Maine. The dealer confirmed the tanks slid from the mounts, the technician stated, when installing the new tank, he was able to move the mounting brackets inwards to better secure /hold the tank in place. My tank brackets were moved one inch inward. In short, the process to install the tank mounts in the correct position is not repeatable. Dealer charges were $1,509. supplies to secure tank and connect wires were ~ $200. I have invoice, unable to upload. The vehicle is available for inspection, although repairs have been made. No warning lights or messages or symptoms were given. the tank is not visible from the underside due to the chassis insulation and shielding. When posting my experience on the Facebook Keystone Raptor website, I learn of 5-6 others who experienced the same issue, include a video with a tank dragging down the roadway. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Electrical system
TL* the contact owns a 2020 (na) keystone raptor 425ts fifth wheel trailer. The contact stated that the trailer was not equipped with the bonding jumper connecting wire that should be located in the fuel door area. Without this connecting wire, the vehicle could catch fire when refueling another…
TL* the contact owns a 2020 (na) keystone raptor 425ts fifth wheel trailer. The contact stated that the trailer was not equipped with the bonding jumper connecting wire that should be located in the fuel door area. Without this connecting wire, the vehicle could catch fire when refueling another item, such as an atv or golf cart. The manufacturer was made aware of the defect and advised the contact to go to a local dealer to have it installed; however, no dealer has been able to assist.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10187956Attached are the updated repair instructions for KSB-200305. The information and instructions in a Keystone Service Bulletin (KSB) are intended to inform RV dealership Service Managers/Technicians of situations that may occur with some Recreational vehicles so dealership personnel can perform proper and efficient service. KSBs are intended to be used by trained RV technicians with the knowledge, tools and equipment to do the job properly and safely, not do-it-yourselfers. Information is not presented as a repair guaranteed to be covered by warranty. Keystones P & P (Policy & Procedures) must be followed for any requested warranty work. Do not assume this repair is covered by warranty. This process describes how to replace a Furrion Antenna head with a Winegard 360 for Over The Air (OTA) channels.
- 10187442This is the inspection instructions for KSB-210218, Inspection Process Sidewall Cracks. The information and instructions in a Keystone Service Bulletin (KSB) are intended to inform RV dealership Service Managers/Technicians of situations that may occur with some Recreational vehicles so dealership personnel can perform proper and efficient service. KSBs are intended to be used by trained RV technicians with the knowledge, tools and equipment to do the job properly and safely, not do-it-yourselfers. Inspection information is not presented as a repair guaranteed to be covered by warranty. Keystones P & P (Policy & Procedures) must be followed for any requested warranty work. Do not assume this inspection is covered by warranty. Not every unit requires a repair. This process describes the inspection of sidewall cracks and separation forward of the front slideouts to determine if there is a defect and what repair may need to be performed.
- 10187441This is the revised repair instructions for KSB-180328. The information and instructions in a Keystone Service Bulletin (KSB) are intended to inform RV dealership Service Managers/Technicians of situations that may occur with some Recreational vehicles so dealership personnel can perform proper and efficient service. KSBs are intended to be used by trained RV technicians with the knowledge, tools and equipment to do the job properly and safely, not do-it-yourselfers. Information is not presented as a repair guaranteed to be covered by warranty. Keystones P & P (Policy & Procedures) must be followed for any requested warranty work. Do not assume this repair is covered by warranty. Not every unit listed requires a repair. Please read through the instructions start to finish before attempting the repair. This process describes the safe and proper procedure to repair any unit which experiences a crack at the bottom corner of a slideout at the gooseneck of a 5th wheel, opening the side wall to repair broken tube welds and add reinforcement. This technical service bulletin explains how to perform the repair. Please note: A sublet will be required for aluminum welding if you do not have that capability.
- 10174991This process describes how to replace a Furrion Antenna head with a Winegard 360 for Over The Air (OTA) channels.
- 10169048Letter to dealers for KSB-191007. This process describes the repair where under certain temperature conditions the Norco slide cable system gearbox may leak oil/grease on the slide roof membrane. The KSB describes how to install a drip pan to prevent damage to the roof membrane, and make repairs if necessary.
- 10169047This is the repair instructions for KSB-191007. This process describes the repair where under certain temperature conditions the Norco slide cable system gearbox may leak oil/grease on the slide roof membrane. The KSB describes how to install a drip pan to prevent damage to the roof membrane, and make repairs if necessary.
Every Keystone Raptor model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.