2020 Ktm 790 Adventure
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ktm › 790 Adventure › 2020
These records cover every 2020 Ktm 790 Adventure. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2020 Ktm 790 Adventure. Newest first.
KTM North America, Inc. (KTM) is recalling certain 2019-2020 KTM 790 Adventure and 790 Adventure R, and 2020 KTM 790 Adventure R Rally motorcycles. The front brake master cylinder piston return spring may be too weak to return the brake piston to its original position, reducing the functionality of the front brake.
Risk and remedy
Risk
A front brake with reduced functionality may increase the distance required to stop as well as the risk of a crash or injury.
Remedy
Dealers will replace the return spring, free of charge. Owner notification letters were mailed May 21, 2021. Owners may contact KTM customer service at 1-888-985-6090. KTM's number for this recall is KTM2106.
KTM North America, Inc. (KTM) is recalling certain 2019-2020 790 Adventure and 790 Adventure R motorcycles. The rear brake hose may overheat, causing the rear brake system to fail.
Risk and remedy
Risk
If the rear brake system fails, there would be reduced braking ability, increasing the risk of a crash or injury.
Remedy
KTM will notify owners, and dealers will install a new rear brake line, free of charge. The recall began April 28, 2020. Owners may contact KTM customer service at 1-888-985-6090. KTM's number for this recall is TB2011.
Owner complaints
11 complaints
What owners report most
Latest complaints
- Engine
At approximately 14,700 Miles, the motor on the bike shut off abruptly while riding at 60 mph down the road while negotiating a blind curve. The vehicle was catastrophically disabled with no warning sounds, lights, or codes and left me stranded in an area with limited cell reception and in a blind…
At approximately 14,700 Miles, the motor on the bike shut off abruptly while riding at 60 mph down the road while negotiating a blind curve. The vehicle was catastrophically disabled with no warning sounds, lights, or codes and left me stranded in an area with limited cell reception and in a blind spot for approaching vehicles with no shoulder to safely park on. The bike had not yet seen its first scheduled maintenance interval (manufacturer recommends 18,000 miles) and had received multiple oil changes well before scheduled intervals. No aftermarket modifications were done to the engine, air, fuel or other pertinent systems. Upon disassembling the motor for inspection, there was substantial catastrophic damage to the cam shafts and cam followers. It was concluded by a BMW certified master mechanic that the failure was due to premature wear of the cam followers and cam lobes. The cam follower broke in the motor causing a jump in timing and ejection of valve shims. The force of the malfunction was severe enough to spin a cam lobe 90 degrees out of position on the shaft, bend valves, and other damage. Upon inspecting the air box and oil jets, these components appear in good form and do not appear to have contributed to this malfunction. Upon contacting KTM, I was denied any assistance and have had to facilitate these repairs on my own out of pocket expense (approximately 2500 dollars so far). KTM also denies accountability for what appears to be a design or parts flaw that has been happening to other motorcycles manufactured between 2020 and 2023.
- Engine · Fuel/propulsion system
Engine requires multiple tries to start when cold due to inadequate fuel supply from fuel sensors or fuel injectors. A recurring issue, this happens upon starting every time the engine is cold. This is a known issue by KTM. When the bike was returned to dealer, they reset the sensors and the bike…
Engine requires multiple tries to start when cold due to inadequate fuel supply from fuel sensors or fuel injectors. A recurring issue, this happens upon starting every time the engine is cold. This is a known issue by KTM. When the bike was returned to dealer, they reset the sensors and the bike operated normally for a short time and then returned to faulty starting procedure. The starting issue places an inordinate drain on the battery putting the rider at risk of being stranded.
- Power train
Riding at a constant speed in either 3rd or 4th gear, approx. 30-40mph. Was preparing to make a left turn in the left turn lane so began decelerating by downshifting through all gears until reaching neutral. Once I got to neutral, the engine stalled within 1 or 2 seconds later. Light braking was…
Riding at a constant speed in either 3rd or 4th gear, approx. 30-40mph. Was preparing to make a left turn in the left turn lane so began decelerating by downshifting through all gears until reaching neutral. Once I got to neutral, the engine stalled within 1 or 2 seconds later. Light braking was being applied during this event. Engine stalled while motorcycle was still in motion, approx around 10-20mph. Used brakes to completely stop motorcycle and restarted it without issue. There are lots of discussions about this engine stalling issue in forums online.
- Suspension
The main rear shock shaft seal has failed on two separate occasions causing shock oil to spill all over the catalytic converter posing a huge risk for fire. On both failure instances the motorcycle was being transported on a motorcycle specific hitch rack on the back of my pickup truck. The first…
The main rear shock shaft seal has failed on two separate occasions causing shock oil to spill all over the catalytic converter posing a huge risk for fire. On both failure instances the motorcycle was being transported on a motorcycle specific hitch rack on the back of my pickup truck. The first shock seal failure occurred when I was transporting the motorcycle to my local dealer for service and the temperature was 16 degrees Fahrenheit during transport. The second shock seal failure occurred when I was transporting the motorcycle to Moab for a riding trip and the temperature dropped down to -6 degrees Fahrenheit during transport. KTM completed the first repair under warranty, which only lasted about 9 months when the shock seal failed the second time. I had to pay nearly $600 to get the second failure repaired by a KTM dealer using KTM parts. Both shock seal failures caused shock oil to spill all over the catalytic converter posing a huge fire risk. At this point I seriously doubt the durability and safety of the shock and I'm considering replacing the shock with an aftermarket one that won't fail and cause a fire.
- Engine
The engine’s intake crank lobe (left side) and it’s follower wore unexpectedly to a point that the engine is unusable without inspection and replacement of internal parts. All manufacturer’s service instructions were strictly adhered to and the motorcycle (and original engine) has little more than…
The engine’s intake crank lobe (left side) and it’s follower wore unexpectedly to a point that the engine is unusable without inspection and replacement of internal parts. All manufacturer’s service instructions were strictly adhered to and the motorcycle (and original engine) has little more than 10,500 miles on it. Engine can break down completely if operated in its current state and leave the vehicle’s operator in a position of potential harm, especially during off-highway use, which this vehicle is designed for. Vehicle is available for inspection upon request. (Pictures of internal engine damage are attached.) Dealer currently has vehicle; states they will not be able to independently inspect it until 27 September 2022 at the earliest. Problem had thus not been independently reproduced by the dealer, but the attached pictures clearly show the engine damage. Problem first noticed by the owner/operator through unusual engine noise on 8/14/2022. Other than unusual noise, no vehicle-produced information (lights or messages etc.) informed the operator of potential issues. Operator did not know of the engine damage until he inspected the engine — by removing the valve cover — on 8/27/2022 and notified a local dealer on the same day.
- Engine
* Severe camshaft lobe and follower wear at 17,500 miles with very loud valve knock. I have photos of the wear, and the motorcycle is currently at the dealer for work. And yes, it is available for inspection. *Valve clearance check is due @ 18,600 miles. I checked my valves at 17,500 due to a long…
* Severe camshaft lobe and follower wear at 17,500 miles with very loud valve knock. I have photos of the wear, and the motorcycle is currently at the dealer for work. And yes, it is available for inspection. *Valve clearance check is due @ 18,600 miles. I checked my valves at 17,500 due to a long upcoming trip. Since the valve follower on the intake of cylinder #1 inboard was worn down severely, this could've caused catastrophic engine failure while on the road and possibly caused a sever accident. *The dealer has witnessed the problem and have serviced other similar model KTM bikes for the same issue. *The bad components have been inspected by the KTM authorized dealer. *The only warning was a clicking sound coming from the engine, but one had to carefully listen for it.
- Exterior lighting › Brake lights
The contact owns a 2020 KTM 790 Duke. The contact stated while riding approximately 30 MPH, the rear brake light failed to illuminate unless the brake pedal was fully depressed, not while slightly first applying the brake. The contact stated no warning light was illuminated. The contact had taken…
The contact owns a 2020 KTM 790 Duke. The contact stated while riding approximately 30 MPH, the rear brake light failed to illuminate unless the brake pedal was fully depressed, not while slightly first applying the brake. The contact stated no warning light was illuminated. The contact had taken the motorcycle to a local dealer where it was diagnosed and determined that nothing could be repaired and that depressing the brake pedal with force was the only option to illuminate the rear brake light. The motorcycle was not repaired. The manufacturer had not been informed of the failure. The failure mileage was approximately 7,000.
- Engine · Fuel/propulsion system
Motorcycle takes multiple attempts to start and run - minimum 3 at this point.
- Engine
Engine starts then stalls multiple time when cold starting. Problem has existed since the first service at the dealer at 1000 kms at which time the break-in period ended and the computer was updated at the dealer. Bike was returned to said dealer to report this problem and no solution was found. Currently have 13000 kms on the bike with no resolution or improvement to this problem.
- Engine
The vehicle can take 4-6 attempts to start when cold. Following the exact procedures in the Owner's Manual, or attempting other things like putting a hand over the exhaust to increase back pressure or slightly adding throttle during start makes no difference. This has the potential to be a…
The vehicle can take 4-6 attempts to start when cold. Following the exact procedures in the Owner's Manual, or attempting other things like putting a hand over the exhaust to increase back pressure or slightly adding throttle during start makes no difference. This has the potential to be a serious issue as these vehicles are often taken far into the backcountry where there are no services. Should the vehicle not start after multiple attempts the owner will be stranded. Owners have been led to believe this issue is the result of KTM trying to meet emission standards, though no other models (other than 790/890 vehicles) exhibit this fault.
- Service brakes
Motorcycle rider was cruising forward and in an upright position at 15 mph on a public road when the front brakes experienced a complete and spontaneous lockup, thus preventing forward travel. At the exact time of front brake lock up there was zero input to the front brake control lever, meaning…
Motorcycle rider was cruising forward and in an upright position at 15 mph on a public road when the front brakes experienced a complete and spontaneous lockup, thus preventing forward travel. At the exact time of front brake lock up there was zero input to the front brake control lever, meaning this was a result of a defective braking system. There was no mechanical feedback felt by the rider to provide any warning that the front brakes would spontaneously lock up the front wheel. note: motorcycle was purchased brand new by rider from authorized ktm dealer. Incident occurred with roughly 200 miles on odometer. The motorcycle was never modified or altered once it left dealer lot after purchase.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007582KTM will also retroactively examine warranty or goodwill applications if customers of affected models have already had repairs carried out at their own expense by an authorized KTM dealer in the past due to damaged camshafts or finger followers. If the conditions explained in the communication with the authorized KTM dealer network are met, subsequent goodwill may be considered. Note: All relevant invoices and a credit signed by the customer must be attached to the application. The invoice date must be specified as the repair and fault date, and the affected camshaft must be specified as the component causing the fault.
- 11004950Even though complaints have been reported about the camshafts on the 790 Duke/Adventure MY 2018- 2020 models, examinations of the allegedly defective camshafts have shown that a large proportion of these camshafts are in order. In these cases, it is not a question of wear, but usually only of discoloration or running marks that have formed on the running surface of the cams or on the bearing points of the shafts. To avoid further unnecessary repairs and to counteract any inquiries, the following procedure has been defined:
- 10203673On affected motorcycles there is a possibility that the preload force of the return spring is too low and does not meet the specified tolerance. This could result in the brake piston not being returned to its original position which in rare cases can impair the function of the front brake. To ensure the highest level of safety, performance, reliability and customer satisfaction, it is necessary to replace the front brake master cylinder piston return spring on all affected motorcycles.
- 10180166KTM North America, Inc. has identified a technical problem using the XC_2 tool when attempting to purchase and install some of the Technical Accessories Software Extensions for the above-mentioned model motorcycles.
- 10180165This bulletin supersedes KTB2012 dated April 15, 2020 because the 2020 890 DUKE R software installation errors have been resolved. KTM North America, Inc. has identified a technical problem using the XC_2 tool when attempting to purchase and install some of the Technical Accessories Software Extensions for the above-mentioned model motorcycles.
- 10180164For the 2019 and 2020 790 ADVENTURE and 790 ADVENTURE R models, KTM has enabled the ability to purchase and install the Quickshifter+ technical accessory software extension again using only the XC_2 diagnostic tool. On certain 2020 790 ADVENTURE R RALLY models, it is possible that the Cruise Control and the Quickshifter+ features are not activated as delivered from production. Please do not purchase the Cruise Control and do not purchase the Quickshifter+ for this model as the software purchases are not refundable. It is necessary to activate these two features during PDI and before customer delivery. This can be done by using the XC_2 diagnostic tool in the Technical Accessories menu, select the software icon, click Update, click Activate.
Every Ktm 790 Adventure model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.