2010 Lexus HS
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2010 Lexus HS. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2010 Lexus HS. Newest first.
Toyota is recalling certain model year 2010 Prius vehicles manufactured March 31, 2009, through October 9, 2009; and model year 2010 Lexus HS250h vehicles manufactured June 19, 2009, through October 9, 2009. Nitrogen gas from a component of the brake booster pump assembly could leak into the brake fluid.
Risk and remedy
Risk
As nitrogen is released into the brake fluid, the brake pedal may have reduced hydraulic pressure. Under certain circumstances, this condition could affect stopping distance and increase the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the affected brake booster pump assemblies. The recall began on August 7, 2013. Owners may contact Toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2010 hs250h lexus vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 301, "fuel system integrity." when the vehicle was rotated following a crash test as required, the amount of fuel leakage exceeded the allowable limits.
Risk and remedy
Risk
Fuel leakage, in the presence of an ignition source, could result in a fire.
Remedy
Toyota will notify owners and dealers will repair the affected vehicles by installing a newly designed protector component for the fuel filler inlet pipe free of charge. the safety recall began on august 9, 2010. owners may contact lexus at 1-800-255-3987.
Toyota IS recalling certain model year 2010 toyota prius and lexus hs250h passenger vehicles. customers have experienced inconsistent brake feel after ABS actuation during slow and steady application of the brakes on rough or slick road surfaces. stopping distances may be increased compared with a customer's expectation for a given pedal force.
Risk and remedy
Risk
Vehicle stopping distances may increase relative to a customer's expectation increasing the risk of a crash.
Remedy
Dealers will rewrite the programming of the ABS control unit free of charge. the safety recall began on march 3, 2010, and IS expected to be completed in late march 2010. owners may contact toyota at 1-800-331-4331 and lexus at 1-800-255-3987.
Owner complaints
70 complaints5 involved a crash4 injuries
What owners report most
Latest complaints
- Electrical system › 12v/24v/48v battery · Hybrid propulsion system
The contact owns a 2010 Lexus HS-250H. The contact stated that while driving 10 MPH, the Hybrid failure message was displayed. A dealer contacted. The vehicle was taken to the dealer where it was diagnosed and determined that the battery needed to be replaced. The battery was replaced, and the…
The contact owns a 2010 Lexus HS-250H. The contact stated that while driving 10 MPH, the Hybrid failure message was displayed. A dealer contacted. The vehicle was taken to the dealer where it was diagnosed and determined that the battery needed to be replaced. The battery was replaced, and the vehicle was repaired. The manufacturer was notified of the failure and informed the contact that the warranty had expired. The approximate failure mileage was 119,700.
- Service brakes
Complete loss of hydraulic brake pressure resulting in brake pedal traveling to the floor. Defect: Brake Actuator and Pump Assembly failure Risk: The vehicle has been deemed unsafe to drive by a certified Lexus technician and I was asked to sign a liability waiver to remove vehicle from…
Complete loss of hydraulic brake pressure resulting in brake pedal traveling to the floor. Defect: Brake Actuator and Pump Assembly failure Risk: The vehicle has been deemed unsafe to drive by a certified Lexus technician and I was asked to sign a liability waiver to remove vehicle from dealership. Description: While driving my 2010 Lexus HS250h (90,729 miles) I experienced sudden and catastrophic failure of the braking system where the brake pedal traveled completely to the floor, significantly increasing stopping distance. A diagnostic at Lexus dealership confirmed a failed ABS brake actuator and pump assembly. The dealership stated the car is life-threatening unsafe to drive and required a signed liability waiver before I could tow it away. Despite this being a known defect previously addressed in Lexus support program 23LE04, the manufacturer has declined a goodwill repair for this safety critical component.
- Suspension
The rear suspension lateral links (Rear Control Arm No. 1) have failed to remain adjustable because they were permanently encapsulated in epoxy by the dealer during the official Lexus Safety Recall for rear suspension arm corrosion. This component is currently installed on the vehicle and available…
The rear suspension lateral links (Rear Control Arm No. 1) have failed to remain adjustable because they were permanently encapsulated in epoxy by the dealer during the official Lexus Safety Recall for rear suspension arm corrosion. This component is currently installed on the vehicle and available for inspection upon request. This "locked" state has caused a severe misalignment resulting in premature tire failure, with the current set of tires showing significant inner tread wear and reaching the end of their life far sooner than their expected mileage rating. This creates an immediate hazard of a sudden highway blowout, compromised braking stability, and emergency handling instability that endangers both the occupants and other drivers. Furthermore, the constant lateral drag puts undue stress on other suspension components and reduces fuel efficiency. This problem was first confirmed by an independent service center (Brakes Plus) and subsequently verified by a Lexus dealership technician on January 24, 2026, who acknowledged the parts are non-adjustable due to the manufacturer's recall remedy but refused to replace them under the program. The manufacturer's refusal to replace these locked parts forces the continued operation of an unsafe vehicle.
- Service brakes
Car has a brake malfunction. There was a recall issued for this model in 2013 for this year and model, yet they only included some VIN#'s in the recall when they know most if not all of these models have the problem. Recall: 13V235000 "Model year 2010 Lexus HS250h vehicles manufactured June 19…
Car has a brake malfunction. There was a recall issued for this model in 2013 for this year and model, yet they only included some VIN#'s in the recall when they know most if not all of these models have the problem. Recall: 13V235000 "Model year 2010 Lexus HS250h vehicles manufactured June 19, 2009, through October 9, 2009. Nitrogen gas from a component of the brake booster pump assembly could leak into the brake fluid." My car was manufactured during this period yet is still not included in the recall list. Lexus is absolutely responsible for a brake booster replacement, yet they refuse to accept responsibility. My car has always had odd braking on slick grounds, it has always skipped and slipped forward needing a larger breaking distance than a normal vehicle. Now my dash is lit up like a christmas tree due to a manufacturing malfunction. More VIN#'s need to be added to this Break recall. Please issue a safety investigation into this matter as more vehicles need to be included.
- Forward collision avoidance › Adaptive cruise control · Service brakes
Pre Collision System light on dash, abs lights, traction lights etc Error Code C1391which requires a Brake Booster pump AND a Brake booster pump kit due to a MALFUNCTION which should be manufacturers responsibility. They launched a customer support program for a very short period (you had to…
Pre Collision System light on dash, abs lights, traction lights etc Error Code C1391which requires a Brake Booster pump AND a Brake booster pump kit due to a MALFUNCTION which should be manufacturers responsibility. They launched a customer support program for a very short period (you had to have the error during this short time) and EXCLUDED all HS250h from the Secondary Coverage period by noting expiry if vehicle is over 10years which they were past that at the time of LAUNCHING THE CUSTOMER SUPPORT PROGRAM which is completely unethical and negligent to their customers. I was never notified of this program. This short time frame under the program leaves MOST customers with these vehicles at risk. A safety RECALL should've been done as this is a big safety issue. It is not safe to drive with a bad brake booster because it significantly compromises your vehicle's braking power, making it dangerous. A failing brake booster can cause a vacuum leak, which can lead to the engine stalling when you apply the brakes. Unreliable and worsening problem: The issue is likely to get worse over time, and you could be caught off guard by a complete failure, leaving you with dangerously unreliable brakes. Vehicle has been inspected by Lexus and Toyota, both quoting astronomical fees associated with Brake booster replacement due to malfunction. Lexus Customer Brand Support was of no help, just repeatedly stating that the program expired and that it is up to me if i want to pursue legal action because this needs to be resolved by lexus. There have been class action suits and accidents due to this malfunction and I will pursue legal action as this is complete negligence by Lexus.
- Service brakes
there was a safety recall issued for this model for this year for this car. I took the car to someone and they told me there was a recall for this issue so I should take to the dealer. I took to the dealer in Chandler, they told me there was no open recalls. I called the Lexus customer service…
there was a safety recall issued for this model for this year for this car. I took the car to someone and they told me there was a recall for this issue so I should take to the dealer. I took to the dealer in Chandler, they told me there was no open recalls. I called the Lexus customer service line, they told me to take the car to the place where they had originally done the recall work, at Bell Lexus. Even though they know this was from a recall they will not perform the work even though this is a known issue and safety recall on this car. this is the same combination as the recall and they will not even consider fixing it. [XXX] [XXX] Toyota Motor Sales, U.S.A., Inc. 19001 South Western Avenue, S207 Torrance, CA 90509-2991 Recall Management Division National Highway Traffic Safety Administration 1200 New Jersey Avenue, SE Washington, DC 20590 Re: Toyota Safety Recall 13V-235 – Preliminary Dealer Notification To whom it may concern, Please find attached the Preliminary Dealer Notification Letter for Toyota Safety Recall 13V-235 on the following Toyota and Lexus vehicles: Certain 2010 Model Year HS250h Vehicles Certain 2010 Model Year Prius Vehicles If you have any questions regarding this matter, please contact me at [XXX] . Sincerely, Quality Compliance Assistant Manager Attachments: Lexus 13V-235 (DLD) Dealer Notification (Prelim) Toyota 13V-235 (D0H) Dealer Notification (Prelim) INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Electrical system
The contact owns a 2010 Lexus HS 250H. The contact stated while driving 30 MPH and depressing the accelerator pedal, the vehicle failed to respond as intended. The contact stated that upon depressing the accelerator pedal a second time, the vehicle jerked while responding sluggishly. The contact…
The contact owns a 2010 Lexus HS 250H. The contact stated while driving 30 MPH and depressing the accelerator pedal, the vehicle failed to respond as intended. The contact stated that upon depressing the accelerator pedal a second time, the vehicle jerked while responding sluggishly. The contact stated that the failure also occurred while making a turn. The contact stated that the accelerator pedal was depressed but the vehicle came to a complete stop, nearly causing oncoming traffic to crash into the vehicle. The contact stated upon depressing the accelerator pedal a second time, the vehicle jerked while responding sluggishly. The vehicle was taken to the dealer, where it was diagnosed and determined that the hybrid battery had failed and needed to be replaced. The vehicle was not repaired due to the cost. The manufacturer was not notified of the failure. The failure mileage was approximately 89,000.
- Service brakes
ABS Braking System Pump with an abnormal leak of ACC Press. Under recall # DLD for the same ABS Brake Booster Pump failure a Lexus dealer repaired the system under recall notice in 2013. The same issue happened again in 2025 an ABS Brake Booster Pump failure rendering the car unsafe to drive with a…
ABS Braking System Pump with an abnormal leak of ACC Press. Under recall # DLD for the same ABS Brake Booster Pump failure a Lexus dealer repaired the system under recall notice in 2013. The same issue happened again in 2025 an ABS Brake Booster Pump failure rendering the car unsafe to drive with a defective braking system, an ABS light and Brake light illuminated on the dashboard. The vehicle was taken to a local repair shop which informed me the vehicle was unsafe to drive. I contacted the dealer who stated the repair in 2013 was on warrantied for one year. I then called Lexus corporation under Case # 250212001465 and spoke to several Lexus corporate consumer advocates in their resolution department, who essentially stated Lexus cannot assist with a failed ABS Brake Booster component as it was once repaired and the responsibility to repair the ABS brake system pump falls on me the customer. I informed Lexus this was not a broken headlight, this is a safety issue, an abilty to stop the car braking issue for us and others on the road as the car is unsafe to drive at any speed. Therfore, I request the NTSB assistance to resolve this matter.
- Service brakes
Lexus had a recall on certain 2010 HS250H cars for an issue where they have nitrogen gas leaking into brake fluid causing brake failure. My Vin number was not one of recalls however in August of 2023 they sent me a notice stating that if my car has this problem they will repair at no cost to me.…
Lexus had a recall on certain 2010 HS250H cars for an issue where they have nitrogen gas leaking into brake fluid causing brake failure. My Vin number was not one of recalls however in August of 2023 they sent me a notice stating that if my car has this problem they will repair at no cost to me. Very expensive repair. That notice says they will repair until March 31 2024. It says if certain warning lights are not on , don't take it to get repaired. My car now has this problem and they are saying they won't repair it unless I pay for repair. I have 5 warning lights on and cruise control now won't work as well as they note that brakes could fell causing a collision. I can't afford the repair and I don't agree that they won't repair it. Under the recall there is no time limit and they would repair it today. To me they are verifying that my car was one that should be on recall since it's the same exact issue and they sent me letter verifying that my car was one with problem. Is there anything I can do?
- Engine · Service brakes
The contact owns a 2010 Lexus HS-250h. The contact stated that the check engine warning light was illuminated. The contact stated that while depressing the brake pedal, the brake pump was continuously pumping brake fluid. The vehicle was taken to a certified mechanic who diagnosed that the braking…
The contact owns a 2010 Lexus HS-250h. The contact stated that the check engine warning light was illuminated. The contact stated that while depressing the brake pedal, the brake pump was continuously pumping brake fluid. The vehicle was taken to a certified mechanic who diagnosed that the braking system had malfunctioned, and there was an abnormal leaking of the adaptive cruise control pressure. The contact learned of NHTSA Campaign Number: 13V235000 (Service Brakes) which was related to the failure. The dealer was contacted and confirmed that the VIN was not included in the recall. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was 222,000.
- Air bags · Electrical system
Car stops un-expectantly while driving, this caused the car to turn off and not be able to steer, then it turns back on without warning. This results in not being able to control the car. This resulted in being hit by three cars. It looks like Lexus listed a notice, however we did not receive it, and were not aware of the notice. Waring lamps did come on please see pictures.
- Steering
A week ago I started hearing a clunking noise in the steering column. It would also clunk near the front left wheel when I turned steering wheel. I was told I need to replace the rack and pinion steering, tie rods, and steering shaft. This is a very expensive repair. My 2010 HS250h only has 98,000…
A week ago I started hearing a clunking noise in the steering column. It would also clunk near the front left wheel when I turned steering wheel. I was told I need to replace the rack and pinion steering, tie rods, and steering shaft. This is a very expensive repair. My 2010 HS250h only has 98,000 miles. I have never-ever had to replace the rack and pinion steering in any car! (Nor has anyone I know.) I believe this is a serious safety issue, especially since there were no warning lights to alert me of this problem. I am totally shocked that this would happen in a LEXUS! There clearly must be a defect in the car. (Like there was with the brake booster pump that I had to replace a year ago.) Lexus needs to step up, acknowledge the defect, and reimburse.
- Service brakes
I own a 2010 Lexus HS250H. the problem exists that every warning light associated with the braking, traction, and anti lock system is on. Anti-Lock Braking System (ABS), Traction Control System (TRAC), and Vehicle Stability Control System (VSC) The dealer said it was a faulty Brake de booster…
I own a 2010 Lexus HS250H. the problem exists that every warning light associated with the braking, traction, and anti lock system is on. Anti-Lock Braking System (ABS), Traction Control System (TRAC), and Vehicle Stability Control System (VSC) The dealer said it was a faulty Brake de booster and said it was checked in 2010 and was fine. And to fix the system they need to replace the brake de-booster at a charge of $3000. Apparently, it is not fine, and requested them to comply with the recall and change the debooster, and they said no. Are they libel for the recall fix? Running Sequence Number: 96610 Campaign Number: 13V235000 Make: LEXUS Model: HS Year: 2010 and Running Sequence Number: 68016 Campaign Number: 10V039000 Make: LEXUS Model: HS Year: 2010
- Suspension
SAFETY RECALL GLK REAR LOWER SUSPENSION ARM No.1 CERTAIN 2010 MODEL YEAR HS250h was done previously in 2016 and epoxy was put on the lower control arms rendering the suspension not being able to be aligned by conventional means. The car is now out of alignment in the rear and cannot be adjusted…
SAFETY RECALL GLK REAR LOWER SUSPENSION ARM No.1 CERTAIN 2010 MODEL YEAR HS250h was done previously in 2016 and epoxy was put on the lower control arms rendering the suspension not being able to be aligned by conventional means. The car is now out of alignment in the rear and cannot be adjusted due to the epoxy. Dealership states that once a recall is done it cannot be redone for free and it would be out of pocket. This service can only be done at certified dealership. The car pulls to the right and it swings, sways and drifts into corners and feels very unstable.
- Suspension
Taking left turn, heard a loud sound and complete loss of control of vehicle. Currently being inspected by Lexus dealership, although car was initially towed to dealership service center from which is was purchased. They mentioned lower control arm of rear suspension bolt was lost/missing and rear…
Taking left turn, heard a loud sound and complete loss of control of vehicle. Currently being inspected by Lexus dealership, although car was initially towed to dealership service center from which is was purchased. They mentioned lower control arm of rear suspension bolt was lost/missing and rear struts were shot and vehicle is unsafe to drive. I then paid for a second tow from dealership to Lexus dealership. No warning lights were lit except after total loss of control.
- Power train
Same transmission issue that was recalled is having same issues. Recall was not resolved.
- Service brakes
I have a 2010 HS 250h with 90,000 miles. Out of the blue, the brake actuator started activating every 10 seconds (and even runs for a while once car is shut off) and there is a noise coming from brake pedal area when depressed. Lexus had previously recalled some 2010 HS 250 cars for brake booster…
I have a 2010 HS 250h with 90,000 miles. Out of the blue, the brake actuator started activating every 10 seconds (and even runs for a while once car is shut off) and there is a noise coming from brake pedal area when depressed. Lexus had previously recalled some 2010 HS 250 cars for brake booster pump issues. My VIN was not part of the recall; I dreaded this day would come. Toyota/Lexus is well aware of the brake booster pump issues in their hybrids. Dealer confirmed the issue and now it will cost me $3500 to have a problem fixed that Lexus should have handled a long time ago. I've contacted Lexus corporate and they will not fix the car. I hope the NHTSA will look into all the complaints about this issue and 2010 HS 250h cars. Lexus needs to step up and issue another recall.
- Suspension
The previous recall on this issue is not completely resolved. The rear suspension on this model of Lexus was simply epoxied in place permanently. The recall "resolution" approved by NHTSA and implemented by Lexus does not allow for the common maintenance on the vehicle - namely, alignment.…
The previous recall on this issue is not completely resolved. The rear suspension on this model of Lexus was simply epoxied in place permanently. The recall "resolution" approved by NHTSA and implemented by Lexus does not allow for the common maintenance on the vehicle - namely, alignment. Therefore, inordinate and substantial tire wear occurs due to the inability to align the wheels. The only way to “align” the tires is to buy completely new suspension parts (approximately $900) which will then be permanently epoxied in place again. Instead of the normal alignment ($100) again in an expected maintenance period, the Lexus dealer requires entire replacement again. This recall was NOT repaired. This recall was permanently and unsafely epoxied in place without the possibility of alignment needed for safety. It is unsafe to drive a car that cannot be aligned properly. Tire failure is a real and present danger. My tires were excessively worn and could have blown out.
- Suspension
Recall for Rear Suspension arms. There was a recall on my car which was processed in Aug 2016 at 89k miles by previous owner. I purchased the car in Dec 2021-Jan 2022 at around 93-94k miles. This means the car was almost not used by previous owner for 5 years as the recall wasn't performed well…
Recall for Rear Suspension arms. There was a recall on my car which was processed in Aug 2016 at 89k miles by previous owner. I purchased the car in Dec 2021-Jan 2022 at around 93-94k miles. This means the car was almost not used by previous owner for 5 years as the recall wasn't performed well Also, the label for "safety recall" is still on the entire rear suspension arms which proves the point. When i called the dealership, they mentioned they never ever leave the stickers ON after the recall is processed which is contradictory to the repairs done. This is a serious safety issue and Lexus is liable to fix this recall but they are asking me to pay for it. I do not have any extra money to keep spending just because of the recalls not processed correctly. It goes with the brand Lexus which i trusted to buy. Recall is not done correctly which is a FACT. After driving for few months and just around 3-4 k miles the new tires are completely destroyed. This is when my wife was doing on freeway this happened which is very scary and serious safety concern. Attaching the pictures and certificate of recall repairs, if you can help in this regards.
- Fuel/propulsion system
Fuel leak in fuel pump caused my car to completely stop on the highway. No warning lights came on. Lexus company denies that my car was not part of the recall for the fuel pumps on the Lexus HS250 even though multiple issues reported for the fuel pump for this make an model,
- Service brakes
Initially, the ABS, BRAKE, and Anti-skid lights illuminated on the instrument panel and braking began to be spongier than normal. This condition continued for approximately 4 years. The brake system now has failed and braking is extremely slow. The car began beeping constantly while on with or…
Initially, the ABS, BRAKE, and Anti-skid lights illuminated on the instrument panel and braking began to be spongier than normal. This condition continued for approximately 4 years. The brake system now has failed and braking is extremely slow. The car began beeping constantly while on with or without the engine running. This latest error took place while driving at approximately 55mph, soon after a car entered the highway (4 lanes) in front of me, I braked but the brakes did not actuate properly increasing the stopping time and distance. Luckily, I was able to move to the left-hand lane and avoid a collision. This occurred on February 13, 2022 AutoZone pulled the following codes: C1241, C1252-Hydro-booster pump motor malfunction, C1253-Hydro-booster pump motor relay malfunction, C1256-Accumulator low-pressure malfunction, C1311-Open circuit in main relay 1, and C1391-Abnormal leak of ACC PRESS (All except C1241 are related to the braking system) No one has inspected the component. I was able to locate NHTSA Recall Bulletin Reference #10V039000 (SERVICE BRAKES, AIR:ANITILOCK:CONTROL UNIT/MODULE) that references Lexus HS250h models manufactured up to February 2010, yet my VIN doesn't pull up this bulletin when searching the database even though it was manufactured in February of 2010.
- Service brakes
The brake booster pump/accumulator has a diagnosed internal leak. It is identical to Toyota Safety Recall 13V-235 for Certain 2010 Model Year HS250h Vehicles. The exact failure described is what my Lexus HS 250h is experiencing and the DTC code is C1391, which FOUR separate shops have verified.…
The brake booster pump/accumulator has a diagnosed internal leak. It is identical to Toyota Safety Recall 13V-235 for Certain 2010 Model Year HS250h Vehicles. The exact failure described is what my Lexus HS 250h is experiencing and the DTC code is C1391, which FOUR separate shops have verified. The recall listed DTC C1246 and C1256, yet the condition is that there is an internal leak and one must replace the booster pump master assembly. They describe it as following, "The subject vehicles are equipped with brake pressure accumulators consisting of a metal plunger containing brake fluid encased in a metal housing. The plunger is designed with metal pleated bellows to allow for motion. Nitrogen gas is sealed between the plunger and housing. There is a possibility that a fatigue crack could develop in the bellows due to the vertical vibration of the plunger while driving. If this occurs, nitrogen gas could leak into the brake fluid and gradually cause the brake pedal stroke to become longer, resulting in decreased hydraulic pressure. Under certain circumstances, this condition could affect stopping distance and increase the risk of a crash." I have record they did try a repair for this at 17 miles, before purchase, but it clearly DID NOT remedy the situation. After 80,000 miles with a gently driven car they should be required to :Replace the brake booster pump assembly (accumulator) AND the brake booster assembly. The remedy described in the recall information . Out of three repair shops, three have indicated that they cannot make the repair due to Lexus parts or warranty. It is at a Lexus repair presently.
- Service brakes
2010 lexus 250hs brake actuator. Driving along a city street going 45 mph. Slowing down to approach a stop light. Immediately after depressing brake pedal the red brake light and ABS light comes on. My pedal goes straight to the floor and I have no brakes and almost crashed my car into the rear end…
2010 lexus 250hs brake actuator. Driving along a city street going 45 mph. Slowing down to approach a stop light. Immediately after depressing brake pedal the red brake light and ABS light comes on. My pedal goes straight to the floor and I have no brakes and almost crashed my car into the rear end of another car. Diagnostic showed code c1391that ABS master cylinder needed repair. I paid for a car report and found three recalls regarding that problem, toyota/lexus never notified me about those. I just copy paste the report that I have paid to have information about the recalls. Vin: [xxx] vehicle: 2010 lexus hs 250h assembled: toyota motor north america, inc nhtsa recalls service brakes, air:antilock:control unit/module report receipt date: 02-09-2010 nhtsa campaign: 10v039000 summary: toyota IS recalling certain model year 2010 toyota prius and lexus hs250h passenger vehicles. Customers have experienced inconsistent brake feel after ABS actuation during slow and steady application of the brakes on rough or slick road surfaces. Stopping distances may be increased compared with a customer's expectation for a given pedal force. Consequence: vehicle stopping distances may increase relative to a customer's expectation increasing the risk of a crash. remedy: dealers will rewrite the programming of the ABS control unit free of charge. The safety recall began on march 3, 2010, and IS expected to be completed in late march 2010. Owners may contact toyota at 1-800-331-4331 and lexus at 1-800-255-3987. Fuel system, gasoline:storage report receipt date: 06-25-2010 nhtsa campaign: 10v285000 summary: toyota IS recalling certain model year 2010 hs250h lexus vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 301, "fuel sy for some reason the system does not let me up load the attachments. Please let me know if you have another way to send them. information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6).
- Service brakes
So I just got this lexus 2 days ago and I notice that if I have to brake suddenly, the car rolls forward for like a extra 3 seconds..you can feel when the brakes lock up and make the car slide forward, and you can also hear it as well..this IS super dangerous and needs to be fixed
- Service brakes
While driving anytime I attempt to slow the vehicle the brakes do not work as it should the car continue to roll forward for a few seconds before it completely stops. ABS and traction control lights are on. My mechanic inspected the vehicle and advised that brake booster pump needs to be replaced…
While driving anytime I attempt to slow the vehicle the brakes do not work as it should the car continue to roll forward for a few seconds before it completely stops. ABS and traction control lights are on. My mechanic inspected the vehicle and advised that brake booster pump needs to be replaced and said there IS a safety recall for this faulty part. I took my car to lexus but they refused to fix the recall as my vin IS not listed in effected vehicles vin list. Please help/
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Pedestrian alert sounds
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for…
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007456Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006162Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11005121Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11005063Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11003650To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11003648The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
- 11003643Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003642Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.
- 11003641Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
- 11003595To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11003593The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
- 11003588Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003587Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.
- 11003586Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
- 10214355Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
- 10207945POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Lexus. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Lexus.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10205383Spots in Window Glass - vehicle exterior
- 10205359Oil Viscosity Applicability and Cfhange Interval Guide
- 10205358Oil Viscosity Applicability and Cfhange Interval Guide
- 10190468Lexus Safety Recall and Service Campaign - Technician Certification Requirements
- 10176283Safety Recall and Service Campaign - Technician Certification Requirements
- 10152565TT: HVAC drain tube is found to blocked/clogged.
- 10132780TSB: Some 2010 ? 2013 model year vehicles equipped with Generation 6 navigation that have been updated using the 13.1 map data may exhibit a missing character data (street/city names, freeway shields, and landmark icons) condition. A new master DVD set is now available to update the Navigation Update Tool. Customers using 13.1 version 13.09.10 map data may notice missing character data in certain geographical areas.
- 10131963MY 2013 Gen 7 navigation systems use a USB SST to update the firmware and map. MY 2014 IS and GX models incorporate a Gen 8 navigation system that uses a USB stick to update the firmware ONLY. Refer to the chart below for a comprehensive list of all current and previously issued USB SSTs and their applicability.
- 10131760TT: This bulletin is regarding best practices when handling navigation systems that use Hard Disc Drive or Micro SD Card memory. 1. First type is generation 6 or 7 which utilizes HDD (Hard Disc Drive). Pioneer models that begin with NXH, have Map Data, Operating System and other Information in the Hard Disc Drive. With this system if a radio is being sent back for an exchange. The original Hard Disc Drive needs to be removed and installed into the newly serviced radio. 2. The Second type is Generation 8 Navigation system which utilizes the Micro SD Card. Pioneer models that begin with NXF, have map data in the Micro SD card. This is a customer accessible Micro SD card which can be found behind the front flip cover. The original Micro SD card should be removed and installed into the newly serviced radio.
- 10131754Warranty Policy Bulletin: Lexus has received reports of customer concerns in which their vehicle?s halogen low beam headlamp bulbs lifetime is shorter than expected.
- 10129994TSB: REVISION NOTICE ? The Required Tools & Equipment and Repair Procedure sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2010 ? 2012 model year HS 250h vehicles may exhibit a condition where a halogen low beam headlamp bulb lifetime is shorter than customer expectation. A modified wiring harness is available to address this condition.
- 10057807Lexus 2010-2012 my hs 250H equipped with a 2AZ engine : warranty extension due to excessive engine oil consumption. Updated 08/25/2015*lj
- 10038952Toyota lexus: the malfunction light IS on with a trouble code present. This IS a charcoal cansiter problem.
- 10037625Lexus: information on an improved transmission fluid.
Every Lexus HS model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.