2018 Mack Terrapro (leu/mru)

Recalls

1 recall names the 2018 Mack Terrapro (leu/mru). Newest first.

• Electrical system › Alternator/generator/regulator

  Apr 18, 2017NHTSA 17V2610003,282 vehicles

  Mack Trucks, Inc. (Mack) is recalling certain 2015-2018 LR and 2011-2018 TerraPro (LEU and MRU) trucks. The alternator cable may be insufficiently thick to handle the current, and, as a result, may overheat.

  Risk and remedy

  Risk

  If the alternator cable overheats, it would increase the risk of a fire.

  Remedy

  Mack will notify owners, and dealers will replace the alternator cable, free of charge. The recall began on June 16, 2017. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0407.

  Full recall details →

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10253807CBR: Turbo Compound (TC) Hot Side Noise, Diagnostic Information.
• 10253804CBR: Equipped With An Automated Manual Transmission Model D or F ( AMT-D, AMT-F, mDrive) Missing X1 Value In VDA And Default Settings Guidelines, ParameterP1AOB; Fault Code P1052-54, Error 40,Or Error 18 Encountered During Clutch Or Tran.
• 10251333CBR -Telematics Gateway (TGW) Connect Ability Issues
• 10251331CBR - Active "Set Park Brake" Message On Drivers Information Display (DID).
• 10251329CBR - Automated Manual Transmission ( AMT ) Flywheel Pilot Bearing Wear On Input Shaft.
• 10251328CBR - Driveline Noise, Suspension Ride Height Too High, Suspension Will Not Exhaust - Chassis Built 2016w01 And Newer.
• 10249553CBR: TGW Will Not Connect After SIM Card Replacement
• 10249551CBR: Frame Or Cab Lean
• 10248101CBR: For vehicles equipped with an 11L engine, the plastic saddle bracket holding the a/c line on the left side of the engine may move excessively and rub the area where it secures the line.
• 10246086TSB: Mack Trucks now offer an improved HD Inter-Axle Through Shaft for the CRD 125, 150, 180, and 200 family carriers. The new HD shaft went into production on January 23rd, 2023 for 2.54 - 3.50 axle ratios and April 1st, 2023 for 3.56 - 3.98 ratios. The new HD through shaft is an upgrade over the current standard shaft and can now be used as a replacement part instead of the standard shaft. The new HD shaft has a new design to increase strength, longevity and life over the standard shaft.
• 10244808CBR: Vehicle Overspeed Warning Comes Active At A Lower Speed Than Expected; Vehicle Overspeed Warning In Driver Information Display (DID) - Model Year 2018 And Newer With New Style Instrument Cluster
• 10243454CBR: Model Year 2017, 2018 - US17GHG Common Rail Fuel System Component Electrical Faults
• 10243453TSB: Aftertreatment Diesel Exhaust Fluid (DEF) Tank, Level Sensor, Replacement
• 10243451Service Campaign: Electronic Pressure Relief Valve (EPRV) Delete & Fuel Rail Pressure Sensor Update
• 10241946TSB: Barksdale Leveling Valve, Leak Test
• 10240231CBR: Programming Failure - Chassis With Cummins Engine And An Allison Transmission
• 10240202CBR: Mack DEF Dosing Valve Diagnostic Trouble Codes (DTC) P202D00, P208E00, P103B00 - US10+OBD13 And Newer Emissions
• 10237354CBR: Model Year 2017 to Current - Fuel Filter Change ( Primary And Secondary ) For The EM - USA17 Emission Engines
• 10237351CBR: Automated Manual Transmission ( AMT ) -Transmission Electronic Control Unit ( TECU ) MID130 PSID 29 FMI 7 /P10AE81 Fault Codes Being Generated
• 10237348CBR: Automated Manual Transmission (AMT) Transmission Kickdown Mode
• 10237342CBR: Diagnostic Trouble Code (DTC) P215A-64, Fault Code SPN 84 FMI 19
• 10235490TSB: Vibration Diagnostics
• 10235489TSB: Stock Vehicle Storage and Maintenance
• 10235486TSB: New Vehicle Safety Certification Requirements for Vehicles, U.S. and Canada
• 10232610Mack Model TE,LR - Frame Over Height
• 10232609Mack Chassis - No Gauge Cluster Backlight
• 10222608TSB-Charge Air Cooler t-clamp install.
• 102190822009 Document reformatted to be published as a TSB in Impact. Axle Carrier Pinion Angles
• 102190812009 Document reformatted to be published as a TSB in Impact. Axle Alignment Specifications
• 10215323Mack Chassis - Automated Manual Transmission Model F (AMT-F, mDrive) - Possible Infrequent Hiccup/Stumble During Steady Engine/Vehicle Speed; Diagnostic Trouble Code P1074-92, P1074-94, P1074-96 Logging, Appears As Inactive - Common Model Years 2018
• 10215318Back Office Mack Chassis - Secondary Gauge Set Up - Model Year 2018 and Newer.
• 10215316DEF Level (UQLS) Sensor Troubleshooting Guide - US17+OBD16 Emissions and Newer.
• 10215315Programming Failure - Chassis With Cummins Engine And An Allison Transmission
• 10215314NOx Sensor Troubleshooting Guide - US10+OBD13 And Newer Emissions.
• 10215312(Back Office) - Cruise Control Inoperative After Updating Software VECU5 Without ESP Package (UESP).
• 10215309Aftertreatment Hydrocarbon Injector (AHI) Troubleshooting Guide - US10+OBD13 And Newer Emissions.
• 10215307Selective Catalytic Reduction (SCR) Muffler Troubleshooting Guide - US10+OBD13 And Newer Emissions.
• 10215305DEF Pump Troubleshooting Guide - US10+OBD13 And Newer Emissions.
• 10215296Vehicle Overspeed Warning Comes Active At A Lower Speed Than Expected; Vehicle Overspeed Warning In Driver Information Display (DID) - Model Year 2018 And Newer With New Style Instrument Cluster.
• 10215295Warranty Automated Manual Transmission ( AMT, I-Shift, mDrive ) Control Housing Assembly; Guidelines For Filing A Claim For Chassis Return Visit With Transmission Issues After A Repair Requiring Control Housing Removal And Reinstallation - US07 And N.

Every Mack Terrapro (leu/mru) model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.