2024 Mack Terrapro (te)
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mack › Terrapro (te) › 2024
These records cover every 2024 Mack Terrapro (te). To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2024 Mack Terrapro (te). Newest first.
Mack Trucks, Inc. (Mack) is recalling certain 2022-2027 TerraPro trucks. The engine control unit (ECU) software may allow the engine to start when the transmission is not in Neutral. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 102, "Transmission Shift Lever Sequence, Starter Interlock, and…
Risk and remedy
Risk
Starting the vehicle while in gear may cause unexpected vehicle movement, increasing the risk of a crash or injury.
Remedy
Dealers will update the ECU software, free of charge. Owner notification letters were mailed April 14, 2026. Owners may contact Mack's customer service at 1-800-866-1177. Mack's number for this recall is SC0492. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov March 18, 2026.
Mack Trucks, Inc. (Mack) is recalling certain 2010-2018 MRU and 2019-2025 Terrapro towing vehicles. The vehicles are missing the anti-lock brake (ABS) warning light and circuitry that controls the anti-lock brake function for an attached trailer. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS)…
Risk and remedy
Risk
Driving without a functioning anti-lock brake system may result in the trailer not braking as intended, increasing the risk of a crash.
Remedy
Dealers will add an ABS warning light and circuitry, free of charge. Owner notification letters were mailed April 28, 2025. Owners may contact Mack's customer service at 1-800-866-1177. Mack's number for this recall is SC0474.
Mack Trucks, Inc. (Mack) is recalling certain 2020-2025 Anthem, Granite, TerraPro and Pinnacle vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop working.
Risk and remedy
Risk
Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may have diminished or lost functionality, increasing the risk of a crash.
Remedy
Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed December 9, 2024. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0472.
Mack Trucks, Inc. (Mack) is recalling certain 2024-2025 MD and Terrapro vehicles. The Gross Axle Weight Rating (GAWR) listed on the vehicle certification label is incorrect, which can allow the vehicle to be overloaded. As such, these vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification."
Risk and remedy
Risk
An overloaded vehicle can increase the risk of a crash.
Remedy
Dealers will remove and replace the label, free of charge. Owner notification letters were mailed May 28, 2024. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0463.
Mack Trucks, Inc. (Mack) is recalling certain 2024 Anthem, Pinnacle, and Terrapro vehicles. The steering gear assemblies may have been assembled incorrectly with fewer recirculating balls than are required, which may result in a loss of steering control.
Risk and remedy
Risk
A loss of steering control increases the risk of a crash.
Remedy
Dealers will inspect and replace the defective gears as necessary, free of charge. Owner notification letters were mailed February 9, 2024. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0457.
Mack Trucks, Inc. (Mack) is recalling certain 2023-2024 GR, AN, LR, and Terrapro vehicles. The engine may not return to idle within 2 seconds if the accelerator pedal position sensor becomes disconnected. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 124, "Accelerator Control Systems."
Risk and remedy
Risk
An engine that does not return to idle quickly enough can cause a loss of vehicle control, increasing the risk of a crash.
Remedy
Mack will replace the throttle pedal and update the vehicle software, free of charge. Owner letters were mailed February 27, 2024. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0455.
Mack Trucks, Inc. (Mack) is recalling certain 2024 Granite and TerraPro vehicles. The rear lifting bracket that attaches to the engine cylinder head may be insufficiently secured, which can allow it to detach.
Risk and remedy
Risk
A rear lifting bracket that detaches while the engine is being lifted can result in the engine falling or swinging, increasing the risk of injury.
Remedy
Dealers will inspect and replace the flanged stud in the rear lifting bracket, as necessary, free of charge. Owner notification letters were mailed December 9, 2023. Owners may contact Mack's customer service at 1-800-866-1177. Mack's number for this recall is SC0452.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010857Vehicles may present with oil leak coming from the clutch/flywheel housing and observation of burned clutch smell or clutch slipping. These symptoms can be mistaken as a crankshaft rear main seal leak, when the actual cause is the crankshaft adaptor O-ring.
- 11010820CBR - 11L Engine block compatibility and Backward Conversion Parts Requirements
- 11009708Emission Recall - Mack Trucks has determined that certain vehicles equipped with a model year (MY) 2022-2024 MP8 model engines, may be equipped with an improper engine software calibration that does not match the engine certification label.
- 11009706CBR - 13L Engine - Rear Main Oil Seal Leak - Model Year 2025
- 11009705CBR - Mack Chassis - Timing Gear Plate Repair
- 11008392Service Campaign: TGW3 Non-Communication
- 11008379CBR: Diagnostic Trouble Code (DTC) P107471 - AMT-F
- 11008374CBR: US17 GHG Common Rail Fuel System Component Electrical Faults - Model Year 2017 To 2024
- 11008368CBR: The procedure to eliminate the Mack Chassis "Air Restriction Light On" seen in the cluster is to confirm that the parameter YYT is set to "Enable" with Premium Tech Tool.
- 11008366CBR: To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP fi le will need to be downloaded.
- 11006927CBR: Diagnostic Trouble Code (DTC) U010187- Lost Communication With TECU
- 11006925CBR: 11L, 13L, And 16L Engine Oil Analysis Specifications - US10 And Newer Emissions
- 11006924CBR: Overhead Wear Overview - Model Year2018 To Current (Common Rail Fuel System ONLY)
- 11006923CBR: Mack chassis with an mDRIVE transmission, there have been reports of complete shift assemblies and TECUs being replaced due to technicians being unable to pinpoint the source of the air leak.
- 11006860Service Campaign: Mack trucks has determined that certain AN, GR, PI, TE, and LR model trucks built with TGW3 have stopped communicating after production.
- 11005415Fleet Improvement Campaign: Roof Light Grommets
- 11005410CBR: Telematics Gateway (TGW) Connect Ability Issues
- 11003043CBR - Mack Chassis - Day Cab Glass Breakage
- 11003042CBR - Accelerator Pedal: Inspection Instructions
- 11003036CBR - Mack Chassis - Door Adjustment - Model TE
- 11002843CBR - Brake Caliper Concerns And Premature Brake Pad Wear - Model Year 2023 - 2024
- 10253810CBR: Diagnostic Trouble Code (DTC) P107471 -AMT-F
- 10253807CBR: Turbo Compound (TC) Hot Side Noise, Diagnostic Information.
- 10253804CBR: Equipped With An Automated Manual Transmission Model D or F ( AMT-D, AMT-F, mDrive) Missing X1 Value In VDA And Default Settings Guidelines, ParameterP1AOB; Fault Code P1052-54, Error 40,Or Error 18 Encountered During Clutch Or Tran.
- 10253778Service Campaign: OTA Premature Oil Service Pop-up
- 10252315Service Campaign: Mack trucks has determined that certain AN, GR, PI, and TE model trucks built with a MP8 engine could experience a reduced clamping load on the turbocharger mounting hardware causing the hardware to become loose. On affected vehicles follow the instructions below to remove the turbocharger and replace the mounting hardware and mounting gasket with new parts.
- 10252312Service Campaign: Mack trucks has determined that certain 2024 model year GR, LR and TE trucks with a MP-7 were built with the incorrect oil pan. On effected vehicles follow the instructions below to replace the oil pan with the stainless-steel oil pan, new gasket, new mounting hardware, and replace engine oil and filters.
- 10252308CBR: Vehicles built with an 11 liter engine may experience a complaint of excessive fuel in the oil. It is possible that the source of the fuel is the rear fuel galley plug in the cylinder head.
- 10251335Service Campaign - MMD Suspension Bracket Torque.
- 10251333CBR -Telematics Gateway (TGW) Connect Ability Issues
- 10251331CBR - Active "Set Park Brake" Message On Drivers Information Display (DID).
- 10251329CBR - Automated Manual Transmission ( AMT ) Flywheel Pilot Bearing Wear On Input Shaft.
- 10251328CBR - Driveline Noise, Suspension Ride Height Too High, Suspension Will Not Exhaust - Chassis Built 2016w01 And Newer.
- 10249553CBR: TGW Will Not Connect After SIM Card Replacement
- 10249552CBR: Diagnostic Trouble Code (DTC) P113600 NOx Sensor 1/2 Correlation Calibration Error Bank 1 - Model Year 2024
- 10249551CBR: Frame Or Cab Lean
- 10248105CBR: The purpose of this solution is to give information on Engine Control Module (EMS) Software content. This document lists issues or problems (DTCs, Fault Codes) mitigated or resolved in specific EMS software.
- 10248101CBR: For vehicles equipped with an 11L engine, the plastic saddle bracket holding the a/c line on the left side of the engine may move excessively and rub the area where it secures the line.
- 10246099Parts Sales and Marketing Bulletin: Mack Trucks is excited to announce an additional year warranty program on REMACK AMT mDRIVE Complete Transmissions. This extended warranty of 3 years or 350,000 miles on the transmission will be applicable when dealer installed, required parts are installed and is registered via eService.
- 10246086TSB: Mack Trucks now offer an improved HD Inter-Axle Through Shaft for the CRD 125, 150, 180, and 200 family carriers. The new HD shaft went into production on January 23rd, 2023 for 2.54 - 3.50 axle ratios and April 1st, 2023 for 3.56 - 3.98 ratios. The new HD through shaft is an upgrade over the current standard shaft and can now be used as a replacement part instead of the standard shaft. The new HD shaft has a new design to increase strength, longevity and life over the standard shaft.
Every Mack Terrapro (te) model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.