2025 Mazda CX-50 Hybrid
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mazda › CX-50 Hybrid › 2025
These records cover every 2025 Mazda CX-50 Hybrid. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2025 Mazda CX-50 Hybrid. Newest first.
Mazda North American Operations is recalling certain 2025 CX-50 and CX-50 Hybrid vehicles. The front suspension fastener bolts may not be tightened properly, which can result in suspension component and/or wheel detachment.
Risk and remedy
Risk
Wheel or suspension component detachment can cause a loss of vehicle control and a loss of drive power, increasing the risk of a crash.
Remedy
Dealers will inspect the front suspension fastener bolts and, if necessary, replace and tighten them, free of charge. Owner notification letters were mailed December 10, 2025. Owners may contact Mazda customer service at 1-800-222-5500 Option 6. The manufacturer's number for this recall is 7925J. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning November 3, 2025.
Mazda North American Operations (Mazda) is recalling certain CX-50 Hybrid and CX-50 vehicles. Incorrectly configured module software may cause the air bag to deploy improperly.
Risk and remedy
Risk
An air bag that deploys improperly increases the risk of injury during a crash.
Remedy
Dealers will update the module software, free of charge. Owner notifications will not be mailed due to all vehicles being under Mazda dealer control. Owners may contact Mazda customer service at 1-800-222-5500 Option 6. The manufacturer's number for this recall is 7625F.
Mazda North American Operations (Mazda) is recalling certain 2025 CX-50 Hybrid vehicles. The transmission gear shifter can be moved from Neutral to Drive without pressing the brake pedal.
Risk and remedy
Risk
Shifting into gear without the brake pedal depressed can result in unexpected vehicle movement, increasing the risk of a crash.
Remedy
Dealers will replace the Engine Control Module (ECM) and reprogram the Hybrid Control Unit (HCU) and Power Control Unit (PCU), free of charge. Interim owner notification letters were mailed August 15, 2025. A second notice will be sent once the remedy becomes available, anticipated late summer 2025. Owners may contact Mazda customer service at 1-800-222-5500 Option 6. The manufacturer's number for this recall is 7725F.
Mazda North American Operations (Mazda) is recalling certain 2024-2025 CX-50 vehicles equipped with Mazda Genuine Accessory trailer hitches. The trailer hitch assembly bolts may loosen and cause the assembly to separate from the vehicle body during towing or normal driving conditions.
Risk and remedy
Risk
A detached trailer hitch assembly can create a road hazard, increasing the risk of a crash.
Remedy
Dealers will tighten the trailer hitch bolts, free of charge. Owner notification letters were mailed April 4, 2025. Mazda's number for this recall is 7225C.
Mazda North American Operations (Mazda) is recalling certain 2024 Mazda 3, CX-30, and 2025 CX-50 vehicles. A malfunction in the forward sensing camera (FSC) may prevent the automatic emergency braking system and the lane-keep assist system from functioning. In addition, the headlights will not automatically adjust from high beams to low beams as intended.
Risk and remedy
Risk
Automatic braking, steering assist, and headlight control systems that do not function as intended can increase the risk of a crash.
Remedy
Dealers will inspect and replace the forward sensing camera as necessary, free of charge. Owner notification letters were mailed September 24, 2024. Owners may contact Mazda customer service at 1-800-222-5500, Option 6. Mazda's number for this recall is 6824H.
Owner complaints
9 complaints
What owners report most
Latest complaints
- Power train
On three separate occasions, while in reverse backing out of my driveway, the car failed to engage the transmission when shifting into drive, acting like it was in neutral. There were no warning lights or messages on the dashboard. The only way that I found to engage the transmission was to turn…
On three separate occasions, while in reverse backing out of my driveway, the car failed to engage the transmission when shifting into drive, acting like it was in neutral. There were no warning lights or messages on the dashboard. The only way that I found to engage the transmission was to turn off the vehicle, turn back on, and move selector to drive. This is a safety issue as I've had cars approaching in both directions with the CX-50 behing immobilized and not able to move out of the roadway.
- Forward collision avoidance › Adaptive cruise control · Service brakes
When using adaptive cruise control, during SOME cornering, SOMETIMES the car brakes unexpectedly, very aggressively, without warning. Very dangerous, especially when another car is behind you.
- Forward collision avoidance › Adaptive cruise control · Unknown or other · Vehicle speed control
1) Driving on an expressway and the red warning light goes on - two red bars with a sterring wheel in the middle. Car sounded an alarm that indicated we were going to crash. No cars in front of us. 2) Driving on the expressway with the cruise control on. Driving 75 miles an hour and the vehicle…
1) Driving on an expressway and the red warning light goes on - two red bars with a sterring wheel in the middle. Car sounded an alarm that indicated we were going to crash. No cars in front of us. 2) Driving on the expressway with the cruise control on. Driving 75 miles an hour and the vehicle goes to 30 miles an hour and I have to accelerate. Thank the Lord no one was behind me. This has happened 3 times. I took it into Mazda and tool them the issue but they just did their regular maintenance on my car. There is a major issue with this vehicle and nobody wants to admit Need your help
- Forward collision avoidance › Adaptive cruise control · Forward collision avoidance › Automatic emergency braking · Forward collision avoidance › Warnings
Due to a hybrid battery malfunction, full body sensor mlafunction and TPMS functionality error, vehicle left inoperable. Vehicle could not be placed in neutral. Vehicle could not be jump started.
- Power train
I bought the car new from Mazda in December, 2024, and I am the original owner of the car. I backed out of a parking space. I shifted my gear to D, but the car kept sliding backward. I quickly shifted the gear back to P, pressed the parking brake, and turned off my engine. I had to restart my engine several times before the car will drive forward in D. This incident happened twice already.
- Engine · Structure › Body
First issue: Rough idle at start. The interior cabin vibrates enough to question the vehicle quality. The rough idle lasts about 40 seconds then engine switches to smooth vibration. It's actually unnerving. Second issue: it's well known in 2025 Mazda installed the Toyota RAV4 hybrid engine and…
First issue: Rough idle at start. The interior cabin vibrates enough to question the vehicle quality. The rough idle lasts about 40 seconds then engine switches to smooth vibration. It's actually unnerving. Second issue: it's well known in 2025 Mazda installed the Toyota RAV4 hybrid engine and transmission into the CX-50. The current ICE engine model had to be modified. As a result there are some structural issues that may become problematic. The front passenger door scrapes against the interior fender. During manufacturing to cover up the defect Mazda purposely offset the passenger side fender mask the defect. This should seriously can into question the structural integrity of the vehicle. The primary concern is by offsetting the fender have the impacted the ability of the crumble zones in this area? Additionally, the front passenger door may become stuck since there is no uniformity in the panel alignment. This should raise caution since the modifications necessary to accommodate the hybrid system my have impacted overall vehicle integrity.
- Engine
Check engine light came on at 600 miles. Took it to the dealer and the code was a p3400 code, cylinder deactivation fault. The dealership replaced both solenoids, part #PYFA-12-360A, found metal in OCV valves. When we got the car back I changed the oil, cut the oil filter open and found large…
Check engine light came on at 600 miles. Took it to the dealer and the code was a p3400 code, cylinder deactivation fault. The dealership replaced both solenoids, part #PYFA-12-360A, found metal in OCV valves. When we got the car back I changed the oil, cut the oil filter open and found large metal shavings. At about 1300 miles the same check engine light came on. Back to the dealership with the same code. Now Mazda says to replace the head.
- Electrical system · Unknown or other
We have had this 2025 Mazda CX-50 hybrid for a couple of months. On January 21, 2025, my wife tried to start it after shopping at a Dollar store. All the warnings lights came on, blinking, and the car was unresponsive to drive. After repeated attempts to start the car, the warning lights, finally…
We have had this 2025 Mazda CX-50 hybrid for a couple of months. On January 21, 2025, my wife tried to start it after shopping at a Dollar store. All the warnings lights came on, blinking, and the car was unresponsive to drive. After repeated attempts to start the car, the warning lights, finally, did go off, but a message of "hybrid system malfunction have vehicle inspected" came on. It finally started and allowed her to drive home. The alert about the hybrid system went off. So far, it has not happened again. I called the service department, and all they said was to bring it in if it does it again. No one has looked at it. Really wasn't any risk to her since she was in town. But had it happened somewhere where she didn't have phone service, it could have put her at risk. I don't really know what happened, but the biggest thing is the worry that it will do it again.
- Service brakes · Unknown or other · Wheels
Brake pads loose / moving inside the shims of overall Brake system for the vehicle . Making audio noise while driving and parking and stopping vehicle. Safety risk of brake Failure Minor Odor of fire/fumes
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011141Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: seats, steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions.
- 11011140When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.
- 11011139A customer may complain of a rattle noise from the right side of the dash. The noise may be coming from the passenger side airbag.
- 11011138Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or "\".
- 11009739Beginning with the 2025 model year and onwards, the CX-50 Turbo Models equipped with the Tow Package feature a modified harness connector, which varies by trim level. There will either be 2 or 3 connectors based on the vehicle's trim, as shown in the following images below. This change to 7-pin harness requires supplemental harness kit VC85-V7-78X.
- 11009662On the subject vehicles, the beltline moldings may be detached from the door body, leading to poor appearance. There are only 57 vehicles affected in the USA for this concern.
- 11009655This service information provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the batteries periodically according to the repair procedure.
- 11009651CX-50 Hybrid service cautions. The CX-50 Hybrid has new and revised features that are different from previous models, and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns.
- 11009649Some customers may complain that a door beltline molding is loose, fell off, or is missing.
- 11009644Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 11009639Some vehicles may experience stains appearing on the hood, roof and/or trunk of the vehicle. This concern is most likely to be found in a cold weather areas just after the RAPGARD is removed at PDI. This may be caused by moisture which has been trapped and condensed between the paint and the RAPGARD. These types of stains can be removed with a heat gun or an infrared drier. If you encounter this concern during PDI, use a heat gun or an infrared drier to apply heat to the affected area to remove the stain(s).
- 11008580Mazda Connect Services - Frequently Asked Questions (FAQ)
- 11008579Mazda Connect Services - Frequently Asked Questions (FAQ)
- 11008578When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.
- 11008577Some customers may complain about scratches on the instrument cluster lens.
- 11008576Qi Wireless Charger symptom troubleshooting.
- 11008575Some customers may complain about the Active Driving Display not displaying turn by turn (TBT) travel direction or navigation information.
- 11008574Some customers may experience a Connected Vehicle failure. The MyMazda App may display an Error Code. This document provides Error Code description and recovery information to assist with repairs.
- 11008573Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control
- 11008572Alexa Built-In Frequently Asked Questions (FAQ)
- 11008571Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
- 11008430This information will give you the necessary knowledge to respond to customers concerns of Smart Brake Support (SBS) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the vehicle.
- 11008428The CX-50 has new and revised features that are different from previous models, and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns.
- 11008423The Blind Spot Monitoring (BSM) system can malfunction with the following symptoms if the rear side radar sensors are installed facing the wrong direction. BSM system indicates vehicle on the opposite side. i-ACTIVSENSE indicator ring will not turn green Rear Cross Traffic Alert (RCTA) does not work Rear side radar sensor aiming may fail TPMS DTC(s) stored
- 11007029For improvement of electrical diagnosis, the SKYACTIV Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV vehicles and compare suspect terminal drag with a known good terminal. To measure the voltage/resistance avoiding any terminal damage.
- 11007027Before judging a steering wheel as having premature wear or a defect, first clean the steering wheel as explained in the repair information. Some vehicles may have steering wheel stains caused by chemicals such as hand lotions.
- 11007024Some customers will report that their fuel door was stuck closed and would not open to refuel the vehicle. Follow the repair steps below unless the conditions outlined in TSB 09-019/21 - FUEL-FILLER LID PANEL IS DEFORMED for 2019-2021 Mazda3 and 2020-2021 CX-30 are present.
- 11007022Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 11007019If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 11007018Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way.
- 11007013Auxiliary key blank cutting procedure. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
- 11007010Some customer's might state that they notice fluid or oil leaking/dripping on the ground when the vehicle is parked. For this concern, inspect the vehicle for any trace of a fluid or oil leak and use the following examples as a guide to determine if it is severe enough to require a repair, or just to clean the area and monitor it at the next service.
- 11007009Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 11006995Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
- 11006918When the power windows are operated many times without being fully closed, small errors of the window position sensor may accumulate and cause improper operation of the jam-safe function. To reduce the risk of this occurrence, the AUTO function is disabled if the power window is operated 10 consecutive times without being fully closed (turning the ignition OFF and then ON does not reset the counting). If the power window is fully closed before the 10th time, the counting restarts and the AUTO function is not deactivated.
- 11006903The removal and installation procedures for front seat components are missing from MGSS. Please follow these two procedures in this SA until the WSM is updated.
- 11005671Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 11005551At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. NOTE: This repair is not a permanent fix, it is meant to make new seats look their best when the vehicle is first presented to the customer. Wrinkles may not be completely removed after the repair is completed. Leather is a natural material and may develop some wrinkles due to aging and wear during normal useage.
- 11003398Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 11003397Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.