2016 Mcneilus Atlantic Front Loader
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mcneilus › Atlantic Front Loader › 2016
These records cover every 2016 Mcneilus Atlantic Front Loader. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2016 Mcneilus Atlantic Front Loader. Newest first.
McNeilus Truck & Manufacturing, Inc. (McNeilus) is recalling certain 2013-2018 Bridgemaster Mixer, Standard Mixer, Model 49 Autoreach Side Loader, Model 48 Zero Radius Side Loader, Model 78 Meridian Front Loader, Model 29 Atlantic Front Loader, Model 87 Contender Front Loader, Model 42 Manual Automated Side Loader, Model 16 3.5 yard TG Rear Loader, Model 11…
Risk and remedy
Risk
If the PRD does not activate in the event of a buildup of pressure, the CNG tank may explode, increasing the risk of fire and injury.
Remedy
McNeilus will notify owners, and dealers will inspect and replace the PRD's, as necessary, free of charge. The recall began October 30, 2019. Owners may contact McNeilus customer service at 1-888-686-7278.
McNeilus Truck & Manufacturing, Inc. (McNeilus) is recalling certain 2016-2018 McNeilus Meridian Front Loader, Atlantic Front Loader, XE Rear Loader, Bridgemaster Mixer, Standard Mixer, and Oshkosh S-Series vehicles, equipped with certain MPVE-250 One-Turn Valves (OTV) on the CNG fuel tanks. If the valve knob is turned more than one turn, the valve's snap…
Risk and remedy
Risk
The forcible ejection of the stem may increase the risk of injury to those nearby. Additionally, the unintended release of CNG can increase the risk of a fire.
Remedy
McNeilus will notify owners, and dealers will replace the valve with a valve from another brand, free of charge. The recall began January 7, 2019 . Owners may contact McNeilus customer service at 1-888-686-7278.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10252426According to an amended ruling in the visual inspection labeling requirement in Federal Motor Vehicle Safety Standard (FMVSS) No. 304, the periodic inspection interval for compressed natural gas (CNG) fuel containers has been modified to at least every 12 months. McNeilus Truck and Manufacturing will support this change by updating safety decals and installing these new decals when a vehicle is inspected by McNeilus CNG technicians, and by answering questions regarding this periodic inspection interval update and how McNeilus will support it.
- 10233666According to an amended ruling in the visual inspection labeling requirement in Federal Motor Vehicle Safety Standard (FMVSS) No. 304, the periodic inspection interval for compressed natural gas (CNG) fuel containers has been modified to at least every 12 months. McNeilus Truck and Manufacturing will support this change by updating safety decals and installing these new decals when a vehicle is inspected by McNeilus CNG technicians, and by answering questions regarding this periodic inspection interval update and how McNeilus will support it.
- 10222301McNeilus Truck and Manufacturing provides these instructions for installing a hydraulic reservoir cork gasket. The installation of this gasket will repair leaks coming from the gasket between the in-tank filter and the reservoir.
- 10217058The following information describes how to purge air and release stored hydraulic energy from a hydraulic system. All manual override features are intended for emergency use, not for continuous-duty operation.
- 10208497McNeilus Truck and Manufacturing offers these instructions for repairing the lugs on the Front Loader Meridian and Front Loader Atlantic CNG tailgates.
- 10204083McNeilus Truck and Manufacturing offers these instructions for ejector cylinder bypass testing.
- 10169446Internal Document work instructions. McNeilus Truck and Manufacturing, Inc. has been alerted by our supplier that a concern affecting safety exists in some Emcara Pressure Relief Device (PRD) valves on CNG tanks (for your information,Emcara?s NHTSA Recall number is 15E059). Some McNeilus Refuse models were shipped with an Emcara CNG PRD which may not vent properly. The purpose of the thermal PRD is to relieve pressure in the CNG system if the CNG tank is reaching an unsafe level of pressure, as might occur with a thermal event that heats up a tank. In the event of a thermal event, the thermal PRD may not vent properly, which increases the likelihood of a CNG tank over-pressurizing and rupturing. A tank rupture creates an increased risk of injury to the truck occupants, firefighters, or bystanders.
- 10169445Internal Document work instructions. McNeilus Truck and Manufacturing, Inc. has been alerted by our supplier that a concern affecting safety exists in some Emcara Pressure Relief Device (PRD) valves on CNG tanks (for your information,Emcara?s NHTSA Recall number is 15E059). Some McNeilus Refuse models were shipped with an Emcara CNG PRD which may not vent properly. The purpose of the thermal PRD is to relieve pressure in the CNG system if the CNG tank is reaching an unsafe level of pressure, as might occur with a thermal event that heats up a tank. In the event of a thermal event, the thermal PRD may not vent properly, which increases the likelihood of a CNG tank over-pressurizing and rupturing. A tank rupture creates an increased risk of injury to the truck occupants, firefighters, or bystanders.
- 10119137This technical service information bulletin describes the replacement of a refuse deflector with a cover system that provides enhanced refuse deflection. The refuse deflector system is designed to sweep refuse off of the hopper cover and into the body in the event refuse spills onto the hopper cover. The enhanced refuse deflector is designed to reduce the hopper cover cleaning requirements.
- 10119136This technical service information bulletin describes the replacement of a refuse deflector with a cover system that provides enhanced refuse deflection. The refuse deflector system is designed to sweep refuse off of the hopper cover and into the body in the event refuse spills onto the hopper cover. The enhanced refuse deflector is designed to reduce the hopper cover cleaning requirements.
- 10119133This technical service information bulletin describes the replacement of a snapper pin with a bolted joint in the body service lift pin assembly. The body service lift is used to raise the refuse collection body during maintenance operations. The snapper pins are adequate for retaining the body service lift pins, however the new method being used in production is a bolt and nut connection.
Every Mcneilus Atlantic Front Loader model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.