2016 Mcneilus Ultra Front Loader

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10252426According to an amended ruling in the visual inspection labeling requirement in Federal Motor Vehicle Safety Standard (FMVSS) No. 304, the periodic inspection interval for compressed natural gas (CNG) fuel containers has been modified to at least every 12 months. McNeilus Truck and Manufacturing will support this change by updating safety decals and installing these new decals when a vehicle is inspected by McNeilus CNG technicians, and by answering questions regarding this periodic inspection interval update and how McNeilus will support it.
• 10233666According to an amended ruling in the visual inspection labeling requirement in Federal Motor Vehicle Safety Standard (FMVSS) No. 304, the periodic inspection interval for compressed natural gas (CNG) fuel containers has been modified to at least every 12 months. McNeilus Truck and Manufacturing will support this change by updating safety decals and installing these new decals when a vehicle is inspected by McNeilus CNG technicians, and by answering questions regarding this periodic inspection interval update and how McNeilus will support it.
• 10222301McNeilus Truck and Manufacturing provides these instructions for installing a hydraulic reservoir cork gasket. The installation of this gasket will repair leaks coming from the gasket between the in-tank filter and the reservoir.
• 10210876This repair procedure describes how to reinforce the rear inner radius of the arm, the arm base, and the top arm fork lug on all Pacific (Model 85), Pacific Ultra (Model 76), and Contender (Model 87) Front End Loaders. Perform this repair procedure only on those vehicles that show signs of metal fatigue in these areas. Before performing the Control Arm Radius Plate Doubler Kit installation or any other repair procedure outlined in this bulletin, visually inspect the rear inner radius of the arm for metal fatigue and if metal fatigue is present, repair any damage in that area first per FEL-TSIB-045.
• 10204083McNeilus Truck and Manufacturing offers these instructions for ejector cylinder bypass testing.
• 10119134This technical service information bulletin describes the replacement of a snapper pin with a bolted joint in the body service lift pin assembly. The body service lift is used to raise the refuse collection body during maintenance operations. The snapper pins are adequate for retaining the body service lift pins, however the new method being used in production is a bolt and nut connection.

Every Mcneilus Ultra Front Loader model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.