2007 Mercedes Benz CL216
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mercedes Benz › CL216 › 2007
These records cover every 2007 Mercedes Benz CL216. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2007 Mercedes Benz CL216. Newest first.
Mercedes benz IS recalling 4,564 my 2001-2006 cl-class (model 215), my 2002-2006 s-class (model 220), my 2003-2007 sl-class (model 230), my 2007-2008 cl-class (model 216), and my 2007 s-class (model 221)passenger vehicles equipped with active body control (abc) acceleration sensors on the front struts. these sensors measure acceleration around the z-axis…
Risk and remedy
Risk
A variation in the transmitted values between affected and unaffected sensors can result in one front strut adjusting to a value indicating body movement while another strut does not adjust presenting the driver with an uneven front suspension. this condition may lead to unexpected body movements at the front axle which can adversely influence the vehicle's directional stability and could lead to a vehicle crash.
Remedy
Dealers will inspect and replace, if necessary, the front abc sensors in all potentially affected vehicles. the recall began on september 22, 2008. owners may contact mercedes-benz at 1-800-367-6372.
Owner complaints
1 complaints1 involved a fire
What owners report most
Latest complaints
- Steering · Suspension
Abc line suspension failure fluid drain into engine bay and under tire. *tr
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10136035Complaints about poor wiping effect of winshield wiper
- 10136029SENTEX gate operator with Clik Card Remote not compatible with Homelink
- 10136026Procedure in case of slight oil traces on TRANSMISSION 722.9
- 10136021Engine diagnosis warning lamp active - The fault code P262600 or P262900 relating to the oxygen sensor upstream of the catalytic converter may be stored in the engine control unit
- 10136020Procedure in case of slight oil traces on TRANSMISSION 722.9
- 10136011Warning message in instrument cluster. The fault code P052400 "The oil pressure is too low" is logged in the engine control unit.
- 10135983Fault code P045600 or P044200 without complaints about engine running characteristics
- 10135966Friction power of torque converter lockup clutch is too high (FC 2783) or actuation of torque converter lockup clutch not possible (FC 0741)
- 10135963Procedure in case of slight oil traces on TRANSMISSION 722.9 with CODE B03
- 10135962Fault code P045600 or P044200 without complaints about engine running characteristics
- 10135961Friction power of torque converter lockup clutch is too high (FC 2783) or actuation of torque converter lockup clutch not possible (FC 0741)
- 10135924Message in instrument cluster "ESP Malfunction - Service Required"
- 10135917Malfunctions of various control units and/or on-board power supply problems caused by water in the control unit tray under the driver/front passenger seat (dislocated, pinched or leaking condensation hose)
- 10135824Check Engine Light (CEL) on, DTC fault code(s) concerning throttle valve actuator
- 10135803Garage door opener cannot be programmed or the range is too short
- 10135751Multicontour/dynamic seat, malfunctions
- 10135747Venting noises from dynamic seat
- 10037408Mercedes-benz: shock absorber procedure.
Every Mercedes Benz CL216 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.