2023 Mercedes-Benz Eqb 250+

Recalls

3 recalls name the 2023 Mercedes-Benz Eqb 250+. Newest first.

• Electrical system › Propulsion system › Traction battery

  Feb 6, 2026NHTSA 26V07300011,895 vehicles

  Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2023-2024 EQB 250+, 2022-2024 EQB 300 4MATIC, and EQB 350 4MATIC vehicles. The high voltage battery may fail internally and lead to a vehicle fire while parked or driving.

  Risk and remedy

  Risk

  A vehicle fire while parked or driving can increase the risk of injury.

  Remedy

  Owners are advised to park outside and away from structures until the recall repair is complete. Also, owners are advised to only charge their vehicles to a maximum of 80% battery capacity until the remedy has been completed. Dealers will replace the high voltage battery, free of charge. Interim letters, notifying owners of the safety risk, were mailed March 13, 2026. Additional letters will be sent once the final remedy is available. This recall replaces recalls 25V050 and 25V894. Vehicles previously repaired under recall 25V050 or 25V894 will need to have the new remedy completed. Owners may contact MBUSA customer service at 1-800-367-6372. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning February 13, 2026.

  Full recall details →

• Electrical system › Propulsion system › Traction battery

  Dec 19, 2025NHTSA 25V894000169 vehicles

  Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2023 EQB 250, 2022-2023 EQB 300 4MATIC, and EQB 350 4MATIC vehicles. The high voltage battery may fail internally and lead to a vehicle fire while parked or driving.

  Risk and remedy

  Risk

  A vehicle fire while parked or driving can increase the risk of injury.

  Remedy

  Owners are advised to only charge their vehicles to a maximum of 80% battery capacity until the repair has been completed. Vehicles previously repaired under Recall 25V050 will need to be repaired again. Dealers will update the battery management system software, free of charge. Owner notification letters were mailed February 6, 2026. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2025120005. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov on December 23, 2025.

  Full recall details →

• Electrical system › Propulsion system › Traction battery

  Feb 7, 2025NHTSA 25V05000012,236 vehicles

  Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2022-2025 EQB 250, EQB 300 4MATIC, and EQB 350 4MATIC electric vehicles. The high voltage battery may fail internally and lead to a vehicle fire while parked or driving.

  Risk and remedy

  Risk

  A vehicle fire while parked or driving can increase the risk of injury.

  Remedy

  Owners are advised to only charge their vehicles to a maximum of 80% battery capacity until the repair has been completed. Dealers will update the battery management system software, free of charge. Owner notification letters were mailed on May 22, 2025. This is a phased recall. Phase 1 owner letters were mailed on May 22, 2025. Phase 2 owner letters were mailed on October 31, 2025 and Phase 3 owner letters were mailed on December 12, 2025. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2025040005.

  Full recall details →

Owner complaints

What owners report most

1. Electrical system27
2. Unknown or other4
3. Engine3
4. Visibility/wiper2
5. Fuel/propulsion system2
6. Service brakes1
7. Seats1
8. Forward collision avoidance1

Latest complaints

• Oct 15, 2026FL
  Electrical system · Forward collision avoidance › Warnings · Service brakes
  My 2023 Mercedes-Benz EQB250 (VIN: [XXX]) is currently sidelined at Mercedes-Benz of Pompano with a dangerous High-Voltage system failure that causes an immediate cascade error of the Electronic Stability Program (ESP) and vehicle braking systems. The technician verified the codes match Mercedes…

  My 2023 Mercedes-Benz EQB250 (VIN: [XXX]) is currently sidelined at Mercedes-Benz of Pompano with a dangerous High-Voltage system failure that causes an immediate cascade error of the Electronic Stability Program (ESP) and vehicle braking systems. The technician verified the codes match Mercedes Service Bulletin LI42.45-P-079407 for an HV DC/DC Converter defect and matched my serial number to the bad batch. The vehicle simultaneously carries an active Federal Safety Recall for an internal High-Voltage Battery Pack explosion/fire risk (NHTSA Campaign 26V073). Mercedes-Benz USA Corporate (Case #[XXX]) and Service Director Hayden Smith are actively refusing to honor the 8-year/100,000-mile High-Voltage warranty on this converter. Furthermore, the dealership is threatening to charge me 'late fees' to strip away alternative loaner transportation. They are actively attempting to force a consumer to either pay $5,800 out-of-pocket for a warrantied high-voltage component or drive a compromised EV powertrain that violates the manufacturer's own outdoor parking safety mandates, as the owner resides in an apartment complex with an enclosed underground garage. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Oct 3, 2026WA
  Visibility/wiper
  The rear liftgate glass (backlite) of the vehicle shattered spontaneously while the vehicle was parked and unoccupied inside a closed parking garage on 09/30/2026. There was no break-in, no impact, no vandalism, and no warning lamps, messages, or other symptoms prior to the failure. The entire…

  The rear liftgate glass (backlite) of the vehicle shattered spontaneously while the vehicle was parked and unoccupied inside a closed parking garage on 09/30/2026. There was no break-in, no impact, no vandalism, and no warning lamps, messages, or other symptoms prior to the failure. The entire tempered-glass pane crazed and partially collapsed with no visible point of impact, consistent with spontaneous tempered-glass failure caused by a nickel sulfide inclusion, a documented glass manufacturing defect. The failed glass is being replaced through the owner's insurance by Safelite AutoGlass. The selling dealer, Mercedes of Seattle, declined to inspect the vehicle and stated they had never heard of such a failure; the problem has not been inspected or confirmed by the manufacturer, a dealer, or an independent service center. Although no one was injured because the vehicle was unoccupied, the same failure while the vehicle is occupied or in motion could shower occupants with glass fragments and eliminate rearward visibility. The complainant asks NHTSA to investigate whether this indicates a glass manufacturing defect trend.

• Oct 3, 2026WA
  Visibility/wiper
  The rear liftgate glass (backlite) of the vehicle shattered spontaneously while the vehicle was parked and unoccupied inside a closed parking garage on 09/30/2026. There was no break-in, no impact, no vandalism, and no warning lamps, messages, or other symptoms prior to the failure. The entire…

  The rear liftgate glass (backlite) of the vehicle shattered spontaneously while the vehicle was parked and unoccupied inside a closed parking garage on 09/30/2026. There was no break-in, no impact, no vandalism, and no warning lamps, messages, or other symptoms prior to the failure. The entire tempered-glass pane crazed and partially collapsed with no visible point of impact, consistent with spontaneous tempered-glass failure caused by a nickel sulfide inclusion, a documented glass manufacturing defect. The failed glass is being replaced through the owner's insurance by Safelite AutoGlass. The selling dealer, Mercedes of Seattle, declined to inspect the vehicle and stated they had never heard of such a failure; the problem has not been inspected or confirmed by the manufacturer, a dealer, or an independent service center. Although no one was injured because the vehicle was unoccupied, the same failure while the vehicle is occupied or in motion could shower occupants with glass fragments and eliminate rearward visibility. The complainant asks NHTSA to investigate whether this indicates a glass manufacturing defect trend.

• Aug 29, 2026FL
  Unknown or other
  BATTER RECALL FIRE SAFETY: I have a 2023 Mercedes-Benz EQB 250+ affected by NHTSA safety recall 26V073. Mercedes has acknowledged that the high-voltage battery can fail internally and cause a fire. I’m instructed to charge only to 80% and park outside away from structures, and Mercedes’ latest…

  BATTER RECALL FIRE SAFETY: I have a 2023 Mercedes-Benz EQB 250+ affected by NHTSA safety recall 26V073. Mercedes has acknowledged that the high-voltage battery can fail internally and cause a fire. I’m instructed to charge only to 80% and park outside away from structures, and Mercedes’ latest remedy requires replacement of the entire high-voltage battery. This is already a low range vehicle and limiting to max 140 miles on interstate before having to charge 45 minutes is a nightmare. I need to drive between states for work and this is just simply not feasible after doing so for months without a solution. The first recall was March 2025 with no fix.

• Jul 13, 2026TX
  Electrical system
  The battery in this car can catch fire at any time while parked. The dealership would not take the car to inspect, repair or replace the battery because there is no remedy available at this time. The recall information go back to January 2026 with no remedy or resolution available period.…

  The battery in this car can catch fire at any time while parked. The dealership would not take the car to inspect, repair or replace the battery because there is no remedy available at this time. The recall information go back to January 2026 with no remedy or resolution available period. Instructions say I can charge it only up to 80%. I have to make adjustments to my daily routine. Instructions say I have to park it away from buildings. This car is a serious safety hazard for humans and buildings.

• Jun 15, 2026CA
  Electrical system · Unknown or other
  Manufacturer Recall Number 2026020004 NHTSA Recall Number26V073 Recall Status: Recall Incomplete, remedy not yet available Due to the combination of certain production and use conditions, an internal short circuit of a battery cell in the high-voltage battery, might lead to a thermal event.…

  Manufacturer Recall Number 2026020004 NHTSA Recall Number26V073 Recall Status: Recall Incomplete, remedy not yet available Due to the combination of certain production and use conditions, an internal short circuit of a battery cell in the high-voltage battery, might lead to a thermal event. Subsequently, an increased risk of a fire cannot be ruled out. Vehicle is unsafe. limited usage to 80% (about 170mls) can't park in the garage / heavy commute vehicle / No remedy since Feb 2026 / I want Mercedes Benz to take it back and refund me my costs of owning the vehicle.

• Jun 14, 2026VA
  Electrical system

  While driving on Route 3 East (Plank Road) in the Fredericksburg area of Virginia, the electronic displays on the dashboard went completely blank for approximately about 15 seconds.

• Jun 14, 2026VA
  Electrical system

  While driving on Interstate Highway 95, the electronic displays on the dashboard went completely blank for approximately 10 minutes.

• May 25, 2026TX
  Electrical system

  Mercedes has not provided any remedy for NHTSA Recall Number26V073. We have written the following email on April 26, 2026 but have not received any reply. Please find attached letter we have written to Mercedes.

• May 22, 2026FL
  Electrical system
  The contact owns a 2023 Mercedes Benz EQB 250. The contact received notification of NHTSA Campaign Number: 26V073000 (Electrical System) however, the part to do the recall repair was not yet available. The vehicle was taken to the dealer and the dealer was contacted. The vehicle was not diagnosed…

  The contact owns a 2023 Mercedes Benz EQB 250. The contact received notification of NHTSA Campaign Number: 26V073000 (Electrical System) however, the part to do the recall repair was not yet available. The vehicle was taken to the dealer and the dealer was contacted. The vehicle was not diagnosed or repaired. The dealer confirmed that the remedy parts were not yet available. The manufacturer was made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated their concern. The contact stated that the vehicle is unsafe and hazard to drive for the contact daughter and other passenger The contact had not experienced a failure.

• May 9, 2026FL
  Electrical system · Engine · Seats

  Car battery can't be charged more than 80 ℅ , fire risk

• May 7, 2026WA
  Electrical system
  A vehicle fire while parked or driving can increase the risk of injury. NHTSA ID Number: 26V073000 Manufacturer Mercedes-Benz USA, LLC Components ELECTRICAL SYSTEM Potential Number of Units Affected: 11895 Summary Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2023-2024 EQB 250+…

  A vehicle fire while parked or driving can increase the risk of injury. NHTSA ID Number: 26V073000 Manufacturer Mercedes-Benz USA, LLC Components ELECTRICAL SYSTEM Potential Number of Units Affected: 11895 Summary Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2023-2024 EQB 250+, 2022-2024 EQB 300 4MATIC, and EQB 350 4MATIC vehicles. The high voltage battery may fail internally and lead to a vehicle fire while parked or driving. Remedy Owners are advised to park outside and away from structures until the recall repair is complete. Also, owners are advised to only charge their vehicles to a maximum of 80% battery capacity until the remedy has been completed. Dealers will replace the high voltage battery, free of charge. Interim letters, notifying owners of the safety risk, were mailed March 13, 2026. Additional letters will be sent once the final remedy is available. This recall replaces recalls 25V050 and 25V894. Vehicles previously repaired under recall 25V050 or 25V894 will need to have the new remedy completed. Owners may contact MBUSA customer service at 1-800-367-6372. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning February 13, 2026.

• Apr 22, 2026FL
  Electrical system
  I am the owner/lessee of a 2023 Mercedes-Benz EQB 250+ (VIN: [XXX] ) affected by NHTSA safety recall 26V073 — a high-voltage battery fire risk defect that has failed three separate repair attempts. I am filing this complaint to document Mercedes-Benz USA’s failure to provide an adequate remedy…

  I am the owner/lessee of a 2023 Mercedes-Benz EQB 250+ (VIN: [XXX] ) affected by NHTSA safety recall 26V073 — a high-voltage battery fire risk defect that has failed three separate repair attempts. I am filing this complaint to document Mercedes-Benz USA’s failure to provide an adequate remedy under federal recall regulations. Background: Recall 26V073 was issued three separate times — first as recall 25V050 then 25V894 and finally 26V073. Each prior software remedy failed to resolve the underlying battery defect. Mercedes-Benz has now determined a full battery replacement is required. As of today no replacement battery is available for my specific vehicle VIN [XXX] . Current Situation: As a result of this unresolved recall I have been required to: • Park my vehicle outside and away from structures at all times • Restrict charging to a maximum of 80% capacity • Operate a fire risk vehicle for several months with no remedy available • Absorb $3,000 in home EV charger installation costs now largely unusable due to charging restrictions • Continue paying $22,000 in remaining lease obligations on a vehicle I cannot safely use Federal Compliance Failure: Under 49 CFR 573 Mercedes-Benz USA is required to provide affected owners with a free remedy within a reasonable timeframe. Mercedes-Benz USA has: • Failed to provide a repair — no remedy currently available • Formally declined to repurchase the vehicle • Offered $8,000 in goodwill compensation which does not constitute a remedy under federal recall regulations • Instructed my dealer Crown Eurocars in Pinellas Park Florida not to provide a loaner vehicle or storage assistance despite promising both in a written offer dated April 20 2026 Additional Bad Faith: Mercedes-Benz USA communicated a false claim to MBFS executive resolution team member Caroline stating that I had requested no further contact. I never made this request. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Apr 19, 2026FL
  Electrical system · Engine · Fuel/propulsion system
  Subject: Safety Complaint – 2023 Mercedes-Benz EQB (Active Recall) Reference: CMS Case #XXX Vehicle: 2023 Mercedes-Benz EQB VIN: [XXX] I am filing a safety complaint regarding an active recall on my vehicle and the lack of a clear, safe resolution. The vehicle is currently under an active…

  Subject: Safety Complaint – 2023 Mercedes-Benz EQB (Active Recall) Reference: CMS Case #XXX Vehicle: 2023 Mercedes-Benz EQB VIN: [XXX] I am filing a safety complaint regarding an active recall on my vehicle and the lack of a clear, safe resolution. The vehicle is currently under an active safety recall, and we have been advised it may not be safe to operate under certain conditions. At the same time, the dealership has informed us that the vehicle cannot be traded in due to the recall. This has left us in a position where: * We may not be able to safely drive the vehicle * We cannot trade or dispose of the vehicle * We have not been given clear guidance on safe use or storage Mercedes-Benz USA (CMS Case #21602523) has declined a repurchase and offered only partial goodwill compensation without providing a clear, actionable solution. We are concerned that consumers are being left with a vehicle that may be unsafe to operate and cannot be reasonably removed from service. We are requesting review and guidance on: 1. Whether the vehicle is safe to operate 2. Manufacturer responsibility in resolving recall-related limitations 3. Consumer protections in situations where a recalled vehicle cannot be used or traded This situation creates safety, liability, and consumer protection concerns, especially as we must leave the vehicle unattended while traveling internationally. Sincerely, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Apr 16, 2026FL
  Electrical system

  They’re not replacing my car in a timely manner under the recall and they keep promising to call me and they don’t.

• Apr 12, 2026CA
  Electrical system
  I purchased a Mercedes EQB 250+ (2023) in December 2025 from W.I. Simonson Mercedes-Benz in Santa Monica, CA(certified dealership). In April 2026, I discovered a recall affecting certain EQB vehicles through a Facebook forum. After entering our VIN into the official recall database, we confirmed…

  I purchased a Mercedes EQB 250+ (2023) in December 2025 from W.I. Simonson Mercedes-Benz in Santa Monica, CA(certified dealership). In April 2026, I discovered a recall affecting certain EQB vehicles through a Facebook forum. After entering our VIN into the official recall database, we confirmed that our vehicle is subject to a recall issued in February 2026. We did not receive any notification (mail, email, or otherwise) from either the dealership or Mercedes-Benz regarding this recall. I contacted the dealership’s Service Department to inquire about the recall and repair options. I was informed that: •The required parts are currently unavailable •Parts are not expected until approximately December 2026 •I should contact Mercedes-Benz corporate for further assistance I contacted Mercedes-Benz customer support and provided my personal details (name, phone number, VIN, address). I explained that: •The recall involves a serious safety concern (potential fire risk) •I have an infant and cannot safely operate the vehicle •I require a loaner vehicle or alternative transportation immediately The representative: •Confirmed that a case was opened •Advised that a follow-up would occur within 7 days I contacted the dealership again to request a loaner vehicle. I was advised that: •Loaner vehicles are only provided when a vehicle is actively undergoing service •Since parts are unavailable, the vehicle cannot be taken in for service Therefore, a loaner vehicle cannot be provided After escalation, a Service Advisor confirmed: •The dealership cannot provide a loaner under these circumstances •Resolution must be pursued directly with Mercedes-Benz corporate Corporate may potentially offer: •A loaner vehicle •A vehicle buyback The vehicle is not safe to operate, leaving me without reliable transportation No loaner vehicle or alternative transportation has been provided Responsibility has been deferred between the dealership and manufacturer

• Apr 6, 2026CA
  Electrical system
  February 2026, our vehicle was recalled for the Battery Issue. We contacted Mercedes Benz USA LLC, several several times ,we filed a claim, they said it would be for a Buy Back, we can not get anyone to call us back to resolve this issue, we contacted the dealer that we purchased the vehicle from…

  February 2026, our vehicle was recalled for the Battery Issue. We contacted Mercedes Benz USA LLC, several several times ,we filed a claim, they said it would be for a Buy Back, we can not get anyone to call us back to resolve this issue, we contacted the dealer that we purchased the vehicle from and they will not call us back at all. Meanwhile we have received emails from the Charging Station Companies that we can no longer charge our vehicle with their companies due to the recall on the Battery, per the recall they reviewed / received, so we are stuck with a car that we can not charge / drive. We need help.

• Mar 31, 2026VA
  Electrical system
  I am submitting this complaint regarding an active fire‑risk recall on my Mercedes‑Benz EQB and MBUSA’s refusal to provide a safety remedy. My vehicle was previously placed under a no‑drive instruction due to the fire‑risk recall. MBUSA attempted a remedy, but that remedy failed, and the safety…

  I am submitting this complaint regarding an active fire‑risk recall on my Mercedes‑Benz EQB and MBUSA’s refusal to provide a safety remedy. My vehicle was previously placed under a no‑drive instruction due to the fire‑risk recall. MBUSA attempted a remedy, but that remedy failed, and the safety impairment remains. Despite this, MBUSA Customer Care has declined to confirm or deny a safety‑related repurchase and has stated that their goodwill options (loaner, rental, storage, and cash considerations) are their final position. These goodwill measures do not address the underlying safety defect. I have repeatedly asked MBUSA to confirm whether they are denying a safety‑related repurchase under the active fire‑risk recall, the prior no‑drive instruction, the failed remedy attempt, and the ongoing safety impairment. They have refused to answer this question and have stated there is no further escalation within their department. I am requesting NHTSA’s assistance in reviewing this matter, as the manufacturer has not provided a safety remedy and is refusing to address the safety‑related repurchase question. Thank you for your attention to this safety concern. [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Mar 31, 2026GA43,000 mi
  Electrical system
  The contact owns a 2023 Mercedes-Benz EQB 250. The contact stated that while driving at an undisclosed speed, and while starting the vehicle, there was an abnormal sound coming from the vehicle. There was no warning light illuminated. The contact stated that the charger became inoperable and failed…

  The contact owns a 2023 Mercedes-Benz EQB 250. The contact stated that while driving at an undisclosed speed, and while starting the vehicle, there was an abnormal sound coming from the vehicle. There was no warning light illuminated. The contact stated that the charger became inoperable and failed to charge above 80 percent. The contact received notification of NHTSA Campaign Number: 26V073000 (Electrical System); however, the part to do the recall repair was not yet available. The dealer was contacted, but the vehicle was not diagnosed or repaired. The dealer confirmed that the part was not available for the recall repair. The manufacturer was made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The approximate failure mileage was 43,000.

• Mar 28, 2026CA
  Engine
  I was informed that many cars of my make, and model have been recall they will not take into consideration the fact that it’s a safety concern for me now even though I’ve seat didn’t ask questions in regards to this car I know that this car in particular has had over 12,000 recalls for cars between…

  I was informed that many cars of my make, and model have been recall they will not take into consideration the fact that it’s a safety concern for me now even though I’ve seat didn’t ask questions in regards to this car I know that this car in particular has had over 12,000 recalls for cars between 2022 and 2024 and I’ve asked the dealership to go ahead and see if they can assure me that my car‘s not gonna have a problem in the future and they can’t assure me they just told me to charge my car at 80% away from the house which is a little bit impossible since I do have my charging method next to our home I’ve asked for Goodwill. I’ve asked questions to see if they can help us out, but it feels like they really don’t care about the concern. They’re more worry about the value of the car, but at this point, my husband and I are super disappointed because our car has also depreciated a lot because of this

• Mar 26, 2026CA
  Electrical system

  The vehicle is under a safety recall with no permanent fix and is restricted to 80% charging. Even with 8-% charging it is prone to catch fire risks. This reduces usability and raises safety concerns. I

• Mar 26, 2026CA
  Electrical system
  The contact owns a 2023 Mercedes-Benz EQB 250. The contact received notification of NHTSA Campaign Number: 26V073000 (Electrical System). The contact called the local dealer and manufacturer about the recall repair and was informed that the part was not yet available. The contact stated that the…

  The contact owns a 2023 Mercedes-Benz EQB 250. The contact received notification of NHTSA Campaign Number: 26V073000 (Electrical System). The contact called the local dealer and manufacturer about the recall repair and was informed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. Additionally, the contact stated that the charger input had been replaced twice. The dealer informed the contact that the failure was caused by using public charging stations. The failure mileage was unknown.

• Mar 25, 2026AZ
  Electrical system
  The high-voltage battery system in my 2023 Mercedes-Benz EQB 250+ is subject to NHTSA Recall 26V-073, the third recall issued for the same battery cell defect. The manufacturer has acknowledged that the two prior recall remedies (25V-050 and 25V-894, both software-based Battery Management…

  The high-voltage battery system in my 2023 Mercedes-Benz EQB 250+ is subject to NHTSA Recall 26V-073, the third recall issued for the same battery cell defect. The manufacturer has acknowledged that the two prior recall remedies (25V-050 and 25V-894, both software-based Battery Management System updates) were "failed remedies" that did not eliminate the risk of internal short circuit and thermal event (fire). The manufacturer has instructed all affected owners to park the vehicle outdoors and away from any structure and to limit charging to 80% state of charge until a full battery pack replacement can be performed. The battery replacement parts are not expected to be available until approximately December 2026 — roughly 9 months from the date of this complaint. These restrictions create a significant safety risk and loss of use for my household. I have a newborn infant and no viable outdoor parking option. The vehicle cannot be safely parked in my garage per the manufacturer's own instructions due to fire risk. My spouse cannot safely park away from our residence and transport an infant on foot. The vehicle was previously brought to an authorized Mercedes-Benz dealership for prior recall-related service. The underlying battery cell defect — attributed by the manufacturer to deviations in the supplier (Farasis Energy) production process — has not been resolved despite multiple repair attempts. The high-voltage battery is available for inspection upon request. No warning lamps or messages appeared prior to the recall notification. The defect is an internal cell-level issue that may cause thermal runaway without warning, whether the vehicle is parked, charging, or in operation. Two confirmed fire incidents among affected vehicles in the United States have been reported to NHTSA. I am requesting that this complaint be documented to support the record of this recurring, unresolved safety defect affecting approximately 11

• Mar 23, 2026CA
  Electrical system
  The contact owns a 2023 Mercedes-Benz EQB 250+. The contact received notification of NHTSA Campaign Number: 26V073000 (Electrical System). The contact was concerned about parking in the garage and driving the vehicle due to a potential fire. The local dealer was contacted and confirmed that the…

  The contact owns a 2023 Mercedes-Benz EQB 250+. The contact received notification of NHTSA Campaign Number: 26V073000 (Electrical System). The contact was concerned about parking in the garage and driving the vehicle due to a potential fire. The local dealer was contacted and confirmed that the part for the recall repair was on back order. The dealer suggested a Trade-In. The manufacturer was not contacted. The contact had not experienced a failure.

• Mar 19, 2026NJ
  Electrical system · Unknown or other
  My vehicle contains a defective high-voltage lithium-ion battery that is subject to internal short circuits caused by deviations in the battery supplier's production process. According to NHTSA and Mercedes-Benz's own recall documentation, an internal short circuit in a battery cell can trigger a…

  My vehicle contains a defective high-voltage lithium-ion battery that is subject to internal short circuits caused by deviations in the battery supplier's production process. According to NHTSA and Mercedes-Benz's own recall documentation, an internal short circuit in a battery cell can trigger a thermal event — that is, a vehicle fire — whether the vehicle is parked or being driven. Critically, NHTSA has specifically warned that there may be no external warning or dashboard indicator when the thermal event occurs while the vehicle is parked and shut off. This defect is not theoretical. Mercedes-Benz first became aware of vehicle fires caused by this same battery defect through reports of confirmed fire incidents in other markets. NHTSA has formally acknowledged that the defective battery "may fail internally and lead to a vehicle fire while parked or driving," increasing the risk of serious bodily injury or death. I am the parent of toddlers who reside in my household. My vehicle is regularly parked in proximity to my home and family. The risk of a sudden, unannounced vehicle fire — whether in my driveway, garage, or on the road — poses a direct, immediate, and unacceptable threat to the safety and lives of my young children. I cannot continue to operate or park this vehicle without placing my family in danger. Mercedes Benz is coercing me into getting a new Lease contract by using the defective battery as a leverage when in fact they need to take the car back and they are not

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11010970Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY21-25 C-Class, CLA, EQB, EQE, EQS, G-Class, GLA, GLB, GLC, GLE, GLS, GT, S-Class, and SL (206, 118, 243, 294, 296, 465, 247, 254, 167, 192, 223, and 232 platform) vehicles, the MBUX multimedia system does not correspond with the latest series production configuration. The MBUX multimedia system control unit will receive an OTA software update. MBUSA will conduct an OTA service campaign. Remote software updates are automatically downloaded and installed in the customers vehicle free of charge and do not require a dealer visit. No customer letter will be mailed for this OTA software update.
• 11010907Complaint The flap of the reversing camera opens and closes by itself during forward travel. This happens several times during the trip. The customer notices the sound of opening and closing. No camera image is displayed in the head unit. The reversing camera or the 360 system functions normally when activated manually or by engaging drive range "R". This behavior occurs again during each driving cycle. Cause This is not a malfunction, but an intended system behavior: Calibration of the reversing camera is in progress. For this, the cover on the camera is opened for max. 5 cumulative minutes in forward travel. The calibration can be performed if the vehicle speed is < 35 km/h and the steering wheel angle is < 10 (for early vehicles from MFA2 facelift model series such as A-Class, CLA, etc., the 35 km/h (~22 MPH) opening limit may only be reached after the SCN coding is replaced). If the speed of 35 km/h (~22 MPH) is exceeded, the camera retracts and the calibration is therefore aborted. The sequence is started again once the speed returns to the range of 18 km/h (~11 MPH). Remedy Complete the calibration successfully. For this, the vehicle must be driven forwards for a certain time (usually significantly less than one minute) at a speed < 35 km/h (~22 MPH) and a steering wheel angle < 10. This should occur during daylight and without a vehicle following too closely (the camera must be able to see the asphalt). When calibration is successful, the camera flap closes automatically at an unchanged speed. For the rest of the driving cycle, the camera now only opens if the customer requests this, for example by applying the reverse gear. When starting a new driving cycle (ignition change), another calibration is required. The customer can generally perform calibration at the first attempt when a speed in the range between 15 km/h (~9 MPH) and 35 km/h (~22 MPH) is briefly maintained and can therefore play a significant role in reducing the actuation frequency and therefore also the noticeability of the noise to a minimum. In the case of early MFA2 facelift vehicles (A-Class, CLA, etc.), the parking control unit may have to be SCN-coded again to have the complete speed window available for the calibration.
• 11010755Complaint After a control unit replacement of "N112/9 - control unit for telematics services (HERMES)" or the "N112/2 - control unit for telematics services (RAMSES)", the Digital Extras (previously Mercedes me) cannot be activated. The DTC B15CE00 is active or active+saved. In vehicles with "N112/9 - control unit for telematics services (HERMES)": The message "SOS - service not activated" permanently lights up in the instrument cluster AND the actual value "Error when replacing certificate (CEP.36)" is displayed in the actual values for the activation status under "Registration status" (see picture 1). In the control unit log of the "N112/9 - control unit for telematics services (HERMES)", the registration error "CEP Invalid VIN/UniqueID combination" is displayed. In vehicles with "N112/2 - control unit for telematics services (RAMSES)": The actual value "Error when replacing certificate (CEP.36)" is displayed in the actual values for the activation status under "Registration status" (see picture 1). In the control unit log of the "N112/2 - control unit for telematics services (RAMSES)", the registration error "CEP_ VIN_UNIQUEID_INVALID" is displayed. The emergency call is not impaired. Cause In the event of a control unit replacement, sporadic problems in the back end could result in data from the new control unit not being updated in the back end system. Remedy Please create a TIPS case. In some cases, the problem rectifies itself on its own after a little while.
• 11010494Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation -> a significant reduction in the formation of condensation must be clearly recognizable (defogging progress). Note: -If no reduction in the degree of fogging is visible, the rear lamp is defective and must be replaced. -It is not physically possible to defog the headlamps completely some residual fogging may remain. Fogging does not impair the functionality or the service life of the rear lamps. -Simultaneous fogging of multiple component parts indicates extreme climatic conditions and also does not impair the functionality or the service life of the rear lamps. Remedy 2: You can recognize a defective rear lamp as follows: 1. Check the rear lamps to ensure that no external damage is present, and that the differential aeration cells and the diaphragm are present and correctly seated. -> If there are signs of external damage on the rear lamp, the component parts must be replaced as per WIS instructions. 2. Check the electrical connectors of the plugs and pins. -> If moisture/corrosion/etc. is present, the component part must be replaced as per WIS instructions. 3. Check for leak tightness -> Close all openings with Terostat IX or similar and establish and stabilize via an overpressure (4050 mbar) via the plug. -> In the event of a sudden pressure drop, the component part must be replaced as per WIS instructions. Note: External damage to the rear lamps does not constitute a warranty or goodwill case.
• 11010484Complaint Noises (creaking/squeaking) from liftgate lock while driving. Cause Under analysis. Remedy Please create a TIPS case with the below information and send to the Body/Chassis/Entertainment inbox. -- Video of the complaint with and without the rear hatch interior trims installed. -- Vehicle history (accidents, damage, etc.)
• 11010438Complaint Customer complains about anti-theft alarm system triggering without obvious cause when the vehicle is parked and/or when entering the vehicle. All MFA2 and 167 derivates with code 882 may be affected. Cause This is caused by a sporadic loss of communication to the anti-theft alarm system [N26/6]. In many instances there are one or more FCs U110D87, U001988, U016787 stored in the control units anti-theft alarm system [N26/6] and/or signal acquisition and actuation module [N10] / [N10/6]. The alarm system memory may contain several alarm sources. Remedy Please process all following points in succession: 1. Check - Power supply of the overhead control panel [N70] - Ground points of the overhead control panel [N70] Model series 118, 177, 247: W78 Model series 167: W15/2 Model series 243: W78/2 - LIN lines between overhead control panel [N70] and alarm siren [H3/1] - CAN lines between overhead control panel [N70] and signal acquisition and actuation module [N10] or [N10/6] 2. Open TIPS case for vehicles from production date 01.06.2023 (Send to Body/Chassis/Entertainment Inbox) - Attach photo of overhead control panel label (see example images) - Add control unit log of anti-theft alarm system [N26/6] - Add alarm history of anti-theft alarm system [N26/6], alarm siren [H3/1] and front signal acquisition and actuation module [N10/6] 3. Remedy for vehicles prior to production date 01.06.2023 - If the problem cannot be reproduced, the overhead control panel [N70] (anti-theft alarm system [N26/6] is integrated) must be replaced.
• 11009551Complaint "Weekly profile" pre-entry climate control setting not available in the climate control menu or grayed out in the Mercedes me connect App. Cause There may be limitations on the indicator in the display due to incorrect parametrization in the head unit and PTCU SW. Remedy PTCU software update (N127)
• 11009549Complaint Customer complains about anti-theft alarm system triggering without obvious cause when the vehicle is parked and/or when entering the vehicle. All MFA2 and 167 derivates with code 882 may be affected. Cause This is caused by a sporadic loss of communication to the anti-theft alarm system [N26/6]. In many instances there are one or more FCs U110D87, U001988, U016787 stored in the control units anti-theft alarm system [N26/6] and/or signal acquisition and actuation module [N10] / [N10/6]. The alarm system memory may contain several alarm sources. Remedy Please process all following points in succession: 1. Check - Power supply of the overhead control panel [N70] - Ground points of the overhead control panel [N70] Model series 118, 177, 247: W78 Model series 167: W15/2 Model series 243: W78/2 - LIN lines between overhead control panel [N70] and alarm siren [H3/1] - CAN lines between overhead control panel [N70] and signal acquisition and actuation module [N10] or [N10/6] 2. Open TIPS case for vehicles from production date 6/1/2023 - Attach photo of overhead control panel label (see example images) - Add control unit log of anti-theft alarm system [N26/6] - Add alarm history of anti-theft alarm system [N26/6], alarm siren [H3/1] and front signal acquisition and actuation module [N10/6] 3. Remedy for vehicles prior to production date 6/1/2023 - If the problem cannot be reproduced, the overhead control panel [N70] (anti-theft alarm system [N26/6] is integrated) must be replaced.
• 11009122Complaint Washer fluid system leaks Cause Various possible causes: 1. Washer fluid reservoir itself. 2. Seal on washer fluid pump/washer fluid reservoir. 3. Washer fluid pump. 3.1. Distributor housing leaks. 3.2. Pump fitting leaks. 3.3. Washer fluid hose cannot be snapped into place on pump fitting. 3.4. Washer fluid hose will not stay on pump fitting, although connector OK. 4. Washer fluid line. 4.1 Connector will not stay on pump fitting because it is broken. 4.2 Sealing ring in connector missing. 4.3 Sealing ring in connector fitted, but deformed and therefore leaks. 4.4 Damage to washer line by animal. 5. Seal on heating washer fluid reservoir/washer fluid reservoir. Remedy Replace defective component parts only. Do not replace any adjacent component parts that are intact. Note: Repair kits for washer line hoses do exist to allow patches for line damage.
• 11008880Complaint After a control unit replacement of "N112/9 - control unit for telematics services (HERMES)" or the "N112/2 - control unit for telematics services (RAMSES)", the Digital Extras (previously Mercedes me) cannot be activated. The DTC B15CE00 is active or active+saved. In vehicles with "N112/9 - control unit for telematics services (HERMES)": The message "SOS - service not activated" permanently lights up in the instrument cluster AND the actual value "Error when replacing certificate (CEP.36)" is displayed in the actual values for the activation status under "Registration status" (see picture 1). In the control unit log of the "N112/9 - control unit for telematics services (HERMES)", the registration error "CEP Invalid VIN/UniqueID combination" is displayed. In vehicles with "N112/2 - control unit for telematics services (RAMSES)": The actual value "Error when replacing certificate (CEP.36)" is displayed in the actual values for the activation status under "Registration status" (see picture 1). In the control unit log of the "N112/2 - control unit for telematics services (RAMSES)", the registration error "CEP_ VIN_UNIQUEID_INVALID" is displayed. The emergency call is not impaired. Cause In the event of a control unit replacement, sporadic problems in the back end could result in data from the new control unit not being updated in the back end system. Remedy Please create a TIPS case. In some cases, the problem rectifies itself on its own after a little while.
• 11008878Complaint Customer complains of wind noises. Cause The cause is being clarified. Remedy If wind noises can be clearly attributed to the roof railing, create a TIPS case with the following information: Detailed pictures of the roof railing in the actual state Detailed pictures of the roof railing in the taped-up state List of the work to pinpoint the cause Result of test to see whether the component part moves -> establish there is no rattle
• 11008091Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21) in the headliner. C. Dirt inside the microphone housing Remedy 1. Press finger on rear of microphone (on adhesive tape) 2. Remove microphone cap from the front 3. Eliminate protruding material residues of the microphone cutout at the headliner, e.g. with a soldering iron. The microphone must be seated in the headliner as shown in picture "2". 4. Push microphone from behind until it is firmly pressed into the headliner 5. Maintain pressure and press/clip cap into microphone from the front. Note: The cover cap must be clearly heard and felt to engage. 6. This procedure must be carried out on both microphones (B25/20 and B25/21) Note: It is recommended to replace the cover caps. The non-woven cloth in the cover cap protects the microphone from soiling and must not be removed. NOTE: The information contained in this document is intended for use by trained, professional technicians with the knowledge to properly and safely perform diagnosis and repairs on Mercedes-Benz vehicles, using Mercedes-Benz approved tools and equipment. It informs service technicians about conditions that could occur in certain vehicles and provides information that could assist in proper vehicle diagnosis, service, or repair. It does not indicate that a defect is present in any vehicle referenced in this document nor does it imply warranty coverage. DO NOT assume that a symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or groups of vehicles, or that a described repair applies to any particular vehicle or groups of vehicles. There can be multiple causes resulting in the same or similar symptoms or conditions described in this document, and trained professional service technicians must use their diagnostic skills to make evaluations on a case-by-case basis. The information contained in this document does not guarantee warranty coverage nor does it extend the vehicles warranty in any way.
• 11007974Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy In advance, observe LI82.10-P-078301 "Headlamps or Front Fog Lamps Leaking or Fogged". 1. Prepare headlamp/check for external damage: For headlamps with a closed system 1. Check the headlamps for any external damage and check also for correct seating of the Gore-diaphragm/correct latching of the cover caps. 2. If the headlamp exhibits any external damage, replace the headlamp. For headlamps with an open system 1. Check the headlamps for any external damage and seal off the vent then make sure the cover caps are latched correctly into place. 2. If the headlamp exhibits any external damage, replace the headlamp. Note: A headlamp with external damage is not a warranty or goodwill case. 2. Leak test of headlamp with overpressure: Connect test adapter to pressure tester. (Figure 1) Check test adapter for leak tightness. To do so, connect plug and coupling (picture 2) and apply a maximum overpressure of 30 mbar. The pressure must remain constant. If the pressure does not remain constant, use a new adapter. Seal all the outlet openings using sealing compound and the given diaphragm with the plunger (picture 3). (Picture 4) Make allowance for the different headlamp variants here (there are different outlet openings). Check if the headlamp needs to be removed to gain access to the diagnostic socket on the headlamp housing. Plug the adapter onto the diagnostic socket on the headlamp housing. (Picture 5). Apply a maximum of 30 mbar overpressure to the headlamp housing. Note: If the maximum overpressure of 50 mbar is exceeded the headlamp seal will be damaged. If a pressure drop of less than 10 mbar is measured within 30 seconds, the headlamp is not leaky and the problem is down to natural physical fogging. If a pressure drop of more than 10 mbar is measured within 30 seconds, the headlamp is leaky. Note: The leaky position can be localized with the aid of soap suds. Replace any leaky headlamps. Note: Desiccant packs can be installed for headlamps that are not leaky. See: LI82.10-P-064766 Fogged headlamp, desiccant pack installed - open ventilation system LI82.10-P-078304 Fogged headlamp, desiccant pack installed - closed ventilation system
• 11007796Complaint Individual functions such as sliding sunroof or roller sunblind can no longer be operated using the gesture recognition system. Cause Gesture recognition system control unit software N168 Remedy For vehicles before modification year 23/2: A remedy is currently being developed. Replacing parts will have no effect. For vehicles as of modification year 23/2: Considered to be a series production configuration. A change will not be possible in future.
• 11007790Complaint Headlamps fogged or droplets forming. Cause Due to the housing cover with pressure compensation diaphragm, the headlamps are a "closed system". This means that the headlamps are protected against acid gases, dirt and exhaust gas. However, moisture can still enter from two sources. Through absorption and desorption (the commonest cause) or through permeation. Moisture is either absorbed by the plastic material and, when the light source is switched on, it is released from the plastic by desorption, or the moisture penetrates through the plastic materials of the headlamp from outside (permeation). This can lead to the formation of condensation on the lens of the headlamp. The headlamps comply with all applicable US standards and regulations. Remedy Check headlamps for natural fogging or condensation as per LI82.10-P-078301. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. Note: Order service covers and desiccant packs based on the validity description. 1. Remove existing service cover with diaphragm (Picture_01 (1)). 2. Insert desiccant packs (Picture_01 (2)) into new service covers with diaphragm and seal with protective grille and bolt down (Picture_01 (3)). Note: One desiccant pack is required for each small service cover, and two desiccant packs are required for each large service cover. 3. Stick the supplied diaphragm onto the new service cover and attach at the headlamp. Note: The bonding surface must be clean and dry. 4. If the headlamp housing has an additional 2nd diaphragm, this must be covered over with masking tape. Note: The bonding surface must be clean and dry. To ensure that the desiccant pack (absorption) acts effectively, the headlamp has to be air-sealed. Observe or check the following points for this: 1. Seals at the central connector must all be present and correctly fitted (Picture_02). 2. The new transparent diaphragm must be correctly bonded (Picture_03). 3. Check headlamp housing for any external damage.
• 11007753Complaint Headlamp or front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Headlamps comply with all applicable standards. If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Remedy Headlamp: Remedy 1 Clearing fogged/condensed LED headlamps and LED rear lamps: 1. Drive vehicle into workshop (temperature higher than +18 C/+64.4 F) and connect the exhaust extraction. Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the hood or trunk. 4. Switch on the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Clearing fogged/condensed halogen/xenon headlamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4F). Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine. 3. Open the hood. 4. Switch off the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Note: If there is no visible reduction in the formation of condensation, check the headlamp for a defect. (See Remedy 2) It is not physically possible to defog the headlamps completely. Fogging does not impair the operation or the service life of the headlamp. Remedy 2 A Damaged headlamp can be identified as follows: 1. Check the headlamp for external damage and that the cover caps and the diaphragm are correctly seated. 2. Check the electrical connectors of the plugs and pins. 3. Check for leak tightness in accordance with LI82.10-P-078307. The test can only be conducted on headlamps. 4. If the headlamp or the rear lamp has any external damage, replace the component part in accordance with the WIS instructions. Note: External damage to the headlamp/rear lamp or faulty seating of the cover caps does not present a warranty or goodwill case. With headlamps, it is possible to install desiccant packs if the problem occurs repeatedly. Open ventilation system: LI82.10-P-064766. Closed ventilation system LI82.10-P-078304
• 11007752Complaint Transfer of selected user-defined scene/ animation (MeApp) from HU to ECU software fails to start. Charging bar stops at 0%. (Picture in attachment) Cause Communication between light control unit and HU Remedy Software update to latest version: - A26/17 - MBUX multimedia system (head unit) - E1n14 - Front left digital headlamp control unit (DHLS-CU-VL) - E2n14 - Front right digital headlamp control unit (DHLS-CU-VR)
• 11007745Complaint Partly reduced power steering assist when stationary or at low speeds, at approximately 7 MPH, such as when parking. No warning message is displayed and no fault codes are stored. Steering assist returns to normal after key cycle or at speeds greater than 7 MPH but condition may return until remedy is performed. Cause Software in the electric power steering (ES) N68. Remedy Perform software update of electric power steering (ES) N68. Disclaimer NOTE: The information contained in this document is intended for use by trained, professional technicians with the knowledge to properly and safely perform diagnosis and repairs on Mercedes-Benz vehicles, using Mercedes-Benz approved tools and equipment. It informs service technicians about conditions that could occur in certain vehicles and provides information that could assist in proper vehicle diagnosis, service, or repair. It does not indicate that a defect is present in any vehicle referenced in this document nor does it imply warranty coverage. DO NOT assume that a symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or groups of vehicles, or that a described repair applies to any particular vehicle or groups of vehicles. There can be multiple causes resulting in the same or similar symptoms or conditions described in this document, and trained professional service technicians must use their diagnostic skills to make evaluations on a case-by-case basis. The information contained in this document does not guarantee warranty coverage nor does it extend the vehicles warranty in any way.
• 11007673Complaint Damage or discoloration to paint protection films on vehicle. Cause Chip protection films are a wear item that may need to be replaced over the life of the vehicle. They are typically not covered by vehicle warranty. Remedy To properly install a paint/chip protection film, please follow the below guidelines: #1 - Utilize a solution that is 0.2% soap solution (1,000ml of water + 2ml of liquid soap). #2 - Clean the paint surface and ensure it is dust-free. #2a - When cleaning, you can utilize isopropyl alcohol (Rubbing Alcohol) to assist with cleaning. #2b - We recommend a lint-free rag for secondary dusting. #3 - Wet hands with the soapy water solution to protect the adhesive surface. #4 - Remove the backing paper from the film completely. #5 - Moisten the vehicle surface with the soapy water. You can also lay the protective film with adhesive side out onto the wetted surface to also cover the adhesive layer in the soapy water solution. #6 - Remove film and flip over to gently place adhesive side against the paint surface. #7 - Working from the center out, use a squeegee to press the soapy water solution out from under the film. Use sufficient pressure to firmly press the film into the paint surface, but not an excessive amount to damage or stretch the film. #8 - Allow film and paint to "cure" until all of the moisture has evaporated. At this time the adhesive should be dried and cured enough for sufficient hold to release the vehicle.
• 11006700Complaint Once the head unit A26/17 is updated to the FUP4 software release E445.0, it may be the case that online connectivity is no longer available Cause E445.0 FUP4 software release Remedy Update the A26/17 - MBUX multimedia system (Head unit) software to E445.2 FUP4 Optimized or newer version to resolve the complaint.
• 11006690Complaint "Coolant level too low" warning message is shown in the instrument cluster. Fault code P25567B (The 'Coolant level' sensor has a malfunction. The fluid level is too low) is stored in the signal acquisition and actuation module (SAM) control unit N10. Cause The electric drive motor of the vehicle conveys air into the cooling system. The air conveyed into the cooling system leads to an air cushion forming in the expansion reservoir, which in turn causes the coolant level to fall below the warning threshold of the coolant level sensor during travel. After the cap is opened, the coolant level is once again OK. Remedy Replace the black cap A210 501 06 15 of the large working chamber of the expansion reservoir with a red cap A297 500 51 00 and increase the coolant level by 20 mm over the max. marking. On vehicles where this process does not remedy the issue, the expansion reservoir A 243 500 41 00 is replaced by the modified container A243 500 41 00 28. If the problem is still present, please create a TIPS case.
• 11005334Complaint Hand detection system not operating correctly / vehicles with code 266 Fault message in instrument cluster: "Active Emergency Stop Assist not available" "Active Lane Keeping Assist not available" Cause Possible causes: the hand detection mat, the hand detection control unit, the contacts and the steering wheel harness. Remedy Test Procedure: Perform an initial quick test with freeze frame data. Save the N179 - Hand detection system (HE) and N62/4 - Driver assistance system (SG-FAS) control unit logs. Note the fault frequency of fault codes set. Delete the N179 and N62/4 fault memory. Using both hands, "scan" the steering wheel all the way round, including the chrome molding at 6 o'clock (see Picture 1). Read out fault memory and follow steps below for any faults set. Remedy: Vehicles with control unit N179 - Hand detection system (HE): B1E7614: Check contacts and wiring harness in steering wheel by carrying out a visual check for damage, pinched areas, loose connections, etc. (examples in Figs. 2 and 3); If no damage is noted replace the N135 - Steering wheel electronics (LRE) and reassess. If fault code returns replace the steering wheel. Please check the wires and connections in the steering wheel. Afterwards, please check whether the complaint is caused by over torqued screws on steering wheel trim pieces. To do this, please loosen the screws slightly and reevaluate the situation. (Picture 4). P164456: Perform SCN coding. P1CA000: Perform an initial start-up on the N179 hand detection control unit. Faults in N62/4 - Driver assistance system (SG-FAS) control unit with U186B29, U0429E0, U042941, U042929, U042902, U0429E1: If no fault is stored in the N179 control unit: Scan steering wheel as indicated in the test procedure and check whether the fault is reproducible. If no fault code is stored in the hand detection control unit, the fault codes in the driver assistance systems control unit are precautionary messages. Software for the N62/4 - Driver assistance system (SG-FAS) is in preparation to reduce erroneous messages in the driver display.
• 11005294Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation -> a significant reduction in the formation of condensation must be clearly recognizable (defogging progress).
• 11005235Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY 2023-2025 EQB, GLA, and GLC vehicles (243, 247, and 254 platform), the B-pillar certification label might not contain the vehicles rim size, tire size, and cold tire inflation pressure information as required by FMVSS 110. In this case, relevant regulatory requirements might not be met. Mercedes-Benz believes this issue has no impact on vehicle safety. Mercedes-Benz intends to submit a petition to NHTSA for exemption from the notification and remedy requirements of 49 U.S.C. chapter 301, pursuant to 49 CFR Part 556, on the basis that this noncompliance is inconsequential as it relates to motor vehicle safety.
• 11003208Complaint Noise can be heard coming from the air conditioning system at higher blower motor speeds. Cause Leaves/foreign objects have entered through the water drain grille in the water drain thereby causing an imbalance and noise in the blower wheel. Remedy Instructions for the installation of Retrofit Kit TOP598-MFA2 Bermuda foam for model series X243/X247 A2478351400 Sealing frame A2478351500 Sealing frame A2478351600 Sealing frame A2478351700 Sealing frame A2478351800 Sealing frame A2478351900 Sealing frame A2478300104 Housing cover A2478320200 Drainage fitting Steps: 1- Remove windshield wiper as per work instructions: AR82.30-P-6100MFA 2- Remove water baffle cover as per work instructions:AR83.10-P-1411MFB 3- Thoroughly clean body/body-in-white at marked positions and remove plastic cover to air inlet. Then extract air filter. 4- Attach body-in-white foam A2478351600 to cutout at body-in-white. If necessary, fix part in place with light pressure. 5- Attach foam mat A2478351400 to previously cleaned part of body-in-white. Ensure that hole of foam mat is over the hole in the body-in-white. 6- Attach sealing frame A2478351800 along edge as shown in picture. Ensure that the plastic strip is inserted flush with the offset in the previously attached foam mat. 7- Attach sealing frame A2478351700 as shown in the picture. Take care here as the strip should be attached flush to the foam strip positioned lengthwise and must run vertically on the body-in-white downward in the direction of the seam. 8- Attach sealing frame A2478351900 as shown in the picture. Ensure that the foam strip must run along the seam and must be curved outward along the running direction at the end. (As a guide, the curvature should run so that there is a space of approx. 1 cm between the foam strip and the threaded hole). Alternatively, if the corresponding foam in the right picture is present, place the sealing frame A2478351900 along the foam as shown in the picture. 9- Insert drainage fitting A2478320200. When doing so, ensure that the foam flap is aligned in the direction of the fender as shown in the picture and does not fold upward during insertion. Insert fitting with light pressure until it audibly engages. 10- Attach sealing frame A2478351500 to water baffle as in the picture and insert inlet sieve A2478300104 (see picture). 11- Insert water baffle. When doing so, ensure that sealing frame A2478351600 does not fall out of position. Also ensure that the foam frames A2478351700, A2478351800 and A2478351900 run between the body-in-white and the water baffle (see picture). 12 - Clean out the water drains of any debris and ensure proper water flow away from the blower area. 13- Reinstallation of water baffle and windshield wiper (see step 1).
• 11002619Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY 2022-2025 GLE/GLS (167 platform), EQB (243 platform), GLA (247 platform), EQE (294 platform), EQS (296 platform), and GLC (254 platform) vehicles, the B-pillar certification label might not contain the vehicles rim size, tire size, and cold tire inflation pressure information as required by FMVSS 110. In this case, relevant regulatory requirements might not be met. Mercedes-Benz believes this issue has no impact on vehicle safety. Mercedes-Benz intends to submit a petition to NHTSA for exemption from the notification and remedy requirements of 49 U.S.C. chapter 301, pursuant to 49 CFR Part 556, on the basis that this noncompliance is inconsequential as it relates to motor vehicle safety. MBUSA will conduct a service campaign to remedy new vehicles in dealer inventory. An authorized Mercedes-Benz dealer will replace the certification label on the B-Pillar.
• 11002618Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY 2022-2025 GLE/GLS (167 platform), EQB (243 platform), GLA (247 platform), EQE (294 platform), EQS (296 platform), and GLC (254 platform) vehicles, the B-pillar certification label might not contain the vehicles rim size, tire size, and cold tire inflation pressure information as required by FMVSS 110. In this case, relevant regulatory requirements might not be met. Mercedes-Benz believes this issue has no impact on vehicle safety. Mercedes-Benz intends to submit a petition to NHTSA for exemption from the notification and remedy requirements of 49 U.S.C. chapter 301, pursuant to 49 CFR Part 556, on the basis that this noncompliance is inconsequential as it relates to motor vehicle safety. MBUSA will conduct a service campaign to remedy new vehicles in dealer inventory. An authorized Mercedes-Benz dealer will replace the certification label on the B-Pillar.
• 11002617Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY 2022-2025 GLE/GLS (167 platform), EQB (243 platform), GLA (247 platform), EQE (294 platform), EQS (296 platform), and GLC (254 platform) vehicles, the B-pillar certification label might not contain the vehicles rim size, tire size, and cold tire inflation pressure information as required by FMVSS 110. In this case, relevant regulatory requirements might not be met. Mercedes-Benz believes this issue has no impact on vehicle safety. Mercedes-Benz intends to submit a petition to NHTSA for exemption from the notification and remedy requirements of 49 U.S.C. chapter 301, pursuant to 49 CFR Part 556, on the basis that this noncompliance is inconsequential as it relates to motor vehicle safety. MBUSA will conduct a service campaign to remedy new vehicles in dealer inventory. An authorized Mercedes-Benz dealer will replace the certification label on the B-Pillar.
• 11002616Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY 2022-2025 GLE/GLS (167 platform), EQB (243 platform), GLA (247 platform), EQE (294 platform), EQS (296 platform), and GLC (254 platform) vehicles, the B-pillar certification label might not contain the vehicles rim size, tire size, and cold tire inflation pressure information as required by FMVSS 110. In this case, relevant regulatory requirements might not be met. Mercedes-Benz believes this issue has no impact on vehicle safety. Mercedes-Benz intends to submit a petition to NHTSA for exemption from the notification and remedy requirements of 49 U.S.C. chapter 301, pursuant to 49 CFR Part 556, on the basis that this noncompliance is inconsequential as it relates to motor vehicle safety. MBUSA will conduct a service campaign to remedy new vehicles in dealer inventory. An authorized Mercedes-Benz dealer will replace the certification label on the B-Pillar.
• 11002615The vehicles were visible and flagged in VMI as OPEN on June 8 and 11, 2024. The affected vehicles will be removed from display in VMI on June 12, 2024. Campaign will be deactivated since the remedy is still under analysis.
• 11002614Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY 2022-2025 GLE/GLS (167 platform), EQB (243 platform), GLA (247 platform), EQE (294 platform), EQS (296 platform), and GLC (254 platform) vehicles, the B-pillar certification label might not contain the vehicles rim size, tire size, and cold tire inflation pressure information as required by FMVSS 110. In this case, relevant regulatory requirements might not be met. Mercedes-Benz believes this issue has no impact on vehicle safety. Mercedes-Benz intends to submit a petition to NHTSA for exemption from the notification and remedy requirements of 49 U.S.C. chapter 301, pursuant to 49 CFR Part 556, on the basis that this noncompliance is inconsequential as it relates to motor vehicle safety. MBUSA will conduct a service campaign to remedy new vehicles in dealer inventory. An authorized Mercedes-Benz dealer will replace the certification label on the B-Pillar.
• 11000541Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY21-24 C-Class, CLA, EQB, EQE, EQS, GLA, GLB, GLC, GLE, GLS, GT, S-Class, and SL (118, 167, 192, 206, 223, 232, 243, 247, 254, 290, 294, 295, 296 and 297 platform) vehicles, the MBUX system software does not correspond with the latest series production configuration. The MBUX system will receive an OTA update that includes general product improvements and robustness enhancements for a better entertainment experience. MBUSA will conduct an OTA service campaign. Remote software updates are automatically downloaded and installed in the customers vehicle free of charge and do not require a dealer visit. No customer letter will be mailed for this OTA software update.
• 10253703This is to notify you of the Service Campaign OTA update for the MBUX system software in 750,313 Model Year (MY) MY19-24 A-Class, CLA, CLS, E-Class, EQB, GLA, GLB, GLC, GLE, GLS, GT 4-door (177, 118, 257, 213, 238, 243, 247, 253,167, 290 platform) vehicles. The vehicles will not be visible or flagged in VMI or EVA. Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY19-24 A-Class, C-Class, CLA, CLS, E-Class, EQB, GLA, GLC, GLE, GLS, GT 4-door (177, 118, 257, 213, 238, 243, 247, 253, 167, 290 platform) vehicles, the MBUX system software does not correspond with the latest series production configuration. The MBUX system will receive an OTA update that includes general product improvements and robustness enhancements for the Line Traffic Information and Point of Interest (POI) features. MBUSA will conduct an OTA service campaign. Remote software updates are automatically downloaded and installed in the customer's vehicle free of charge and do not require a dealer visit. No customer letter will be mailed for this OTA software update.
• 10252777Tailgate opens unintentionally. Accidental or unnoticed activation of the button to open the tailgate on the vehicle key. E.g. when stored in trouser pocket, handbag etc. Remedy As of the 6th generation, the vehicle key can be recoded so that the tailgate no longer opens as a result of a long press on the button, but by double-clicking on the button instead. The recoding can be carried out as follows: 1. Add AO code O19 in VeDoc (O as in the letter "O" for Oscar, not the number "0"/zero) 2. EZS N73: Perform SCN coding 3. Deactivate the vehicle key (a successful deactivation is indicated by the LED lighting up 2x briefly and then 1x for a long period). 4. Place the vehicle key on the key symbol in the storage compartment and then switch on the ignition. All other vehicle keys must be outside of the vehicle when doing this! Perform steps 3 and 4 successively for all vehicle keys. Notes: 6th, 7th and 8th generation keys can be deactivated as follows: Up to modification year 22/1, by double-clicking on the locking button
• 10249537Complaint Customer complains about anti-theft alarm system triggering without obvious cause when the vehicle is parked and/or when entering the vehicle. All MFA2 and 167 derivates with code 882 may be affected. This is caused by a sporadic loss of communication to the anti-theft alarm system [N26/6]. In many instances there are one or more FCs U110D87, U001988, U016787 stored in the control units anti-theft alarm system [N26/6] and/or signal acquisition and actuation module [N10] / [N10/6]. The alarm system memory may contain several alarm sources. Please process all following points in succession: 1. Check - Power supply of the overhead control panel [N70] - Ground points of the overhead control panel [N70] Model series 118, 177, 247: W78 Model series 167: W15/2 Model series 243: W78/2 - LIN lines between overhead control panel [N70] and alarm siren [H3/1] - CAN lines between overhead control panel [N70] and signal acquisition and actuation module [N10] or [N10/6] 2. Open TIPS case - Open a TIPS case for vehicles: As of manufacturing date 01.02.2022, except production plant 4831 Aguascalientes Mexico or 1380 Tuscaloosa As of manufacturing date 01.08.2022 and production plant 4831 Aguascalientes Mexico or 1380 Tuscaloosa - Attach photo of overhead control panel label (see example images) - Add control unit log of anti-theft alarm system [N26/6] 3. Remedy for vehicles prior to manufacturing date 01.02.2022 (except production plant 4831 Aguascalientes Mexico or 1380 Tuscaloosa) or 01.08.2022 (production plant 4831 Aguascalientes Mexico or 1380 Tuscaloosa) - If the problem cannot be reproduced, the overhead control panel [N70] (anti-theft alarm system [N26/6] is integrated) must be replaced.
• 10249495Noises in the steering column area when steering. Under analysis. Check which area of the steering column the noises occur in. Do the noises tend to occur at the bottom in the driver footwell or do they tend to occur in the area of the steering column switch module (MRSM/SCCM)? If the noises occur in the area of the MRSM/SCCM, work through the following points: - Loosen screws of the MRSM/SCCM and steering wheel, re-align the MRSM/SCCM, and re-fasten the screws (see WIS). Sometimes there is stress at the MRSM/SCCM and noises occur. - If noises continue to occur, swap the MRSM/SCCM into a vehicle without any (noise) complaints. - If the noises occur with the MRSM/SCCM complained about when it is in the vehicle without a complaint (donor vehicle), the MRSM/SCCM can be replaced. - If noises also occur in the customer vehicle with the MRSM/SCCM from the reference vehicle, the MRSM/SCCM is not the cause and must not be replaced. Notes: - When installing the MRSM/SCCM, make sure that no damage occurs! - Only disassemble and mount all component parts in the "straight-ahead position" (see also WIS). - Please refer to this LI in the "Notes" section of the warranty claim!
• 10249482The steering wheel generates grinding noises between the steering wheel and steering column switch module during steering maneuvers See example file in the attachments area: Lenkrad-Schleifgerusch_SteeringWheel-GrindingNoises.mp4 The plastic cover on the back of the steering wheel is not positioned correctly and may therefore rub against the steering column switch module Please use the following noise files for the damaged part analysis: 1. Grinding noise | pot. cause: steering wheel | see attachment: Lenkrad-Schleifgerusch_SteeringWheel-GrindingNoises. mp4 2. Creaking/cracking noise | pot. cause: steering column switch module | see attachment: MRSM-Schleifgerusch_ SCCM-GrindingNoises.MOV If the noise is due to the steering column switch module, please use LI46.10-P-077314. Check for grinding areas on the steering wheel: Please check the covers on the rear for protrusion and, if necessary, remount. 1. Mask off openings on back of steering wheel with adhesive tape 1. Mark the back of the steering wheel with colored chalk (see Picture 1) 2. Mount steering wheel on steering column switch module and turn the steering wheel from left lock to right lock ten times. 3. The chalk will now have disappeared in the areas where there is rubbing (see Picture 2) Warning: Ensure that no cables and visible areas of the steering wheel are damaged. The abrasive excess material on the back of the steering wheel must be carefully removed with a Dremel tool. Tip: You will need to remove approx. 0.1 mm to 0.3 mm of material (example: Picture 3) Make sure that none of the ground-off material gets into the steering wheel. After removing the material, clean the entire back of the steering wheel with a 1% soap solution.
• 10248203Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY19-23 A-Class, CLA, CLS, E-Class, EQB, GLA, GLB, GLC, GLE, GLS, AMG GT (177, 118, 257, 213, 238, 243, 247, 253,167, 290 platform) vehicles, the head unit software does not correspond to the current series production configuration. The head unit will receive an OTA update to optimize the "Live Traffic Information" service for the navigation system. Additional product improvements including infotainment system robustness will be implemented. The software update will be downloaded in the background. The subsequent installation takes roughly 45 minutes and requires the customer's consent in the vehicle. During installation, the system can be used without restriction. The new software will be active after the vehicle has been switched off. MBUSA will conduct an OTA service campaign. Remote software updates are automatically downloaded and installed in the customers vehicle free of charge and do not require a dealer visit. No customer letter will be mailed for this OTA software update.
• 10248195Mercedes-Benz AG (MBAG), the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY19-23 A-Class, C-Class, CLA, CLS, E-Class, EQB, G-Class, GLA, GLB, GLC, GLE, GLS, AMG GT, S-Class (177, 205, 118, 257, 213, 238, 243, 463, 247, 253, 167, 290, 217, 222 platform) vehicles, the communication module system software does not correspond with the latest series production configuration. The communication module will receive an OTA update to improve the system stability and allow for better accessibility of Mercedes me services. MBUSA will conduct an OTA service campaign. Remote software updates are automatically downloaded and installed in the customers vehicle free of charge and do not require a dealer visit. No customer letter will be mailed for this OTA software update.
• 10248162Crease formation on genuine leather seat covers in vehicles with low mileage Objects left on the seats for extended periods of time (pressure marks). Objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle). Light initial creases due to vehicle handling. Light creases in the outer covers originating from the production process (missing finish). Heat treatment of the seat covers using heat gun and plastic wedge. Be very careful to not overheat the seat material!

Every Mercedes-Benz Eqb 250+ model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.