2011 Mercedes-Benz GL350
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mercedes-Benz › GL350 › 2011
These records cover every 2011 Mercedes-Benz GL350. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2011 Mercedes-Benz GL350. Newest first.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2006-2012 ML, GL, and R-Class vehicles. Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.
Risk and remedy
Risk
Reduced brake performance or brake failure can increase the risk of a crash.
Remedy
Owners are advised not to drive their vehicles until the remedy has been performed. Dealers will remove the rubber sleeve, inspect the brake booster, and as necessary, replace the brake booster. All repairs will be performed free of charge. Owner notification letters were mailed on May 24, 2024. Owners may contact MBUSA customer service at 1-800-367-6372. MMUSA's number for this recall is 2024050001/2. This recall is an expansion of previous recall number 22V-315.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2006-2012 ML-Class, GL-Class, and R-Class vehicles. Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.
Risk and remedy
Risk
Reduced brake performance or brake failure can increase the risk of a crash.
Remedy
Owners are advised not to drive their vehicles until the remedy has been performed. Dealers will remove the rubber sleeve, inspect the brake booster, and as necessary, replace the brake booster. All repairs will be performed free of charge. Owner notification letters were mailed June 30, 2022. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's numbers for this recall are 2022050014, 2022050015 2022090006, & 2022090007.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2009-2010 ML320 BlueTec 4Matic, GL320 BlueTec 4Matic and R320 CDI 4Matic, 2011 E350 Cabriolet and E550 Cabriolet, 2009-2011 ML350, ML350 4Matic, ML550 4Matic, ML63 AMG, and C63 AMG, 2010-2011 ML450 4Matic Hybrid, E350 Coupe, E350 4Matic, E550 Coupe, E550 4Matic, and E63 AMG, 2011-2012 GL350…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
MBUSA will their notify owners, and Fiat Chrysler will notify the affected Chrysler owners. Dealers for the respective brands will replace the driver's frontal air bag module, free of charge. This recall began November 2016. Mercedes-Benz owners may contact MBUSA customer service at 1-800-367-6372 and Chrysler owners may contact Fiat Chrysler customer service at 1-800-853-1403.
Owner complaints
23 complaints
What owners report most
Latest complaints
- Service brakes
- The hard brake lines from the going to the rear axle ruptured during light braking. The corroded sections have been removed and are available. - I had no indication of a problem until I went to stop the vehicle. I was able to slow the vehicle down but could not keep it from moving forward with…
- The hard brake lines from the going to the rear axle ruptured during light braking. The corroded sections have been removed and are available. - I had no indication of a problem until I went to stop the vehicle. I was able to slow the vehicle down but could not keep it from moving forward with out being in neutral. Had there been another car in front of me or in traffic, I would not of been able to stop. - The problem cannot be reproduced by a dealer, since the corroded and ruptured section of the lines had to be replaced. There has been no inspection of the issue since no accident occurred. - No warning lamps or any indication of a problem until the brake pedal was applied. Pedal was firm then suddenly went to the floor (repeatedly). Only until all the fluid drained from the reservoir did the "brake" light come on.
- Service brakes, hydraulic
The contact owns a 2011 Mercedes-Benz GL350. The contact received notification of NHTSA Campaign Number: 22V315000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a…
The contact owns a 2011 Mercedes-Benz GL350. The contact received notification of NHTSA Campaign Number: 22V315000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Service brakes
Brakes pipe lines
- Engine
The contact owns a 2011 Mercedes-Benz GL350. The contact stated that the dealer had previously serviced the vehicle under an unknown diesel emission recall; however, the failure occurred after the recall repair was performed with the check engine warning light illuminated. The contact stated that…
The contact owns a 2011 Mercedes-Benz GL350. The contact stated that the dealer had previously serviced the vehicle under an unknown diesel emission recall; however, the failure occurred after the recall repair was performed with the check engine warning light illuminated. The contact stated that while driving at an undisclosed speed, the vehicle lost motive power with the check engine and ABS warning lights illuminated. The vehicle was towed to the dealer, and the ignition switch was replaced; however, the failure recurred. The dealer determined that the engine compartment fuse box needed to be replaced. The vehicle was not repaired and remained at the dealer. The manufacturer was made aware of the failure. The failure mileage was approximately 60,001.
- Back over prevention › Warnings · Suspension · Unknown or other
Malfunction with the air suspension. The vehicle is currently lowered and will not rise which is causing the tires to sit in a bent position and a horrible ride. The tires appear that they will detach from vehicle which is a safety risk for myself and others. After repairs from someone who…
Malfunction with the air suspension. The vehicle is currently lowered and will not rise which is causing the tires to sit in a bent position and a horrible ride. The tires appear that they will detach from vehicle which is a safety risk for myself and others. After repairs from someone who presented themselves as a certified Mercedes’ mechanic, the issues still exist. The problems first existed about a year and a half ago, about 6 months after purchasing. I am making payments on a vehicle I am unable to safely drive or use for travel with my family. This should be a recall due to several vehicles jus in my area with same issues.
- Service brakes
The contact owns a 2011 Mercedes-Benz GL350. The contact stated while driving 20 MPH, the brake pedal was depressed but failed to respond and went all the way to the floorboard. The contact then pumped the brake pedal until the vehicle responded. However, there was 20-foot stopping distance delay.…
The contact owns a 2011 Mercedes-Benz GL350. The contact stated while driving 20 MPH, the brake pedal was depressed but failed to respond and went all the way to the floorboard. The contact then pumped the brake pedal until the vehicle responded. However, there was 20-foot stopping distance delay. The warning message "Brake Fluid Low" was displayed. The contact veered to the side of the road. The contact then noticed a trail of brake fluid on the ground. The contact was able to refill the brake fluid reservoir. The vehicle was taken to an independent mechanic where the brake fit knots, the brake fitting union, and brake fluid line were repaired. The dealer was not notified of the failure. The contact later received notification of NHTSA Campaign Number: 22V315000 (Service Brakes, Hydraulic). The manufacturer was notified of the failure but provided no assistance. The failure mileage was approximately 129,748.
- Engine
The contact owns a 2011 Mercedes-Benz GL350. The contact stated that while driving at approximately 25 MPH, the check engine warning light illuminated continuously. The vehicle was not taken to the dealer. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 130,000.
- Engine
The contact owns a 2011 Mercedes-Benz GL350. The contact stated that while driving at 20 MPH, the accelerator pedal was depressed but failed to respond, causing the vehicle to decelerate. The check engine warning light illuminated. The contact continued to drive the vehicle. The vehicle was taken…
The contact owns a 2011 Mercedes-Benz GL350. The contact stated that while driving at 20 MPH, the accelerator pedal was depressed but failed to respond, causing the vehicle to decelerate. The check engine warning light illuminated. The contact continued to drive the vehicle. The vehicle was taken to the dealer who diagnosed that the exhaust valve pressure sensor and catalytic converter had failed and needed to be replaced. The contact stated that the dealer informed her that the failure was related to an unknown recall that would be issued in the 4th quarter of 2021. The dealer also advised the contact to continue to drive the vehicle in the meantime. The contact stated that the failure had reoccurred several times while driving and the vehicle had been jerking each time it was about to come to a complete stop. The vehicle was not repaired. The manufacturer was made aware of the failure but did not provide any assistance. The failure mileage was approximately 117,000.
- Air bags
Got this recall issued 3 years ago,the infamous takata airbag.called the dealers around again and again,they are saying no parts available .always they say it s gonna be someday in the near future,no specific time or dates.due to the vital nature of this issue I cant accept their candor and lack of interest .please check and advice of my consumer mode to address this issue.thank you
- Air bags
TL* takata recall. The contact owns a 2011 mercedes-benz gl350. The contact received notification of nhtsa campaign number: 16v081000 (air bags) and stated that the part was not available within a reasonable time frame to schedule the recall repair. Ray catena of freehold mercedes-benz (4380 route…
TL* takata recall. The contact owns a 2011 mercedes-benz gl350. The contact received notification of nhtsa campaign number: 16v081000 (air bags) and stated that the part was not available within a reasonable time frame to schedule the recall repair. Ray catena of freehold mercedes-benz (4380 route 9 south, freehold, nj 07728, 732-339-6800) stated that the part was unavailable. There was no mention of a loaner vehicle option from the dealer. The manufacturer was contacted. The contact was not experiencing a failure. Vin tool confirms parts not available. *js
- Air bags
TL* takata recall. The contact owns a 2011 mercedes-benz gl350. The contact received notification of nhtsa campaign number: 16v081000 (air bags); however, the parts to do the recall repair were unavailable. The dealer and the manufacturer were not notified. The contact had not experienced a failure. Vin tool confirms parts not available.
- Air bags
TL* takata recall. The contact owns a 2011 mercedes-benz gl350. The contact received notification of nhtsa campaign number: 16v081000 (air bags). The contact called mercedes-benz of tysons corner at 703-442-8200 (8545 leesburg pike, vienna, va 22182) and was informed that the parts were not…
TL* takata recall. The contact owns a 2011 mercedes-benz gl350. The contact received notification of nhtsa campaign number: 16v081000 (air bags). The contact called mercedes-benz of tysons corner at 703-442-8200 (8545 leesburg pike, vienna, va 22182) and was informed that the parts were not available. The manufacturer was made aware of the issue and was not able to confirm when the parts were to become available. The contact had not experienced a failure. Vin tool confirms parts not available.
- Air bags
Takata recall
- Air bags
TL* takata recall. The contact owns a 2011 mercedes-benz gl350. The contact received notification of nhtsa campaign number: 16v081000 (air bags). The parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair.…
TL* takata recall. The contact owns a 2011 mercedes-benz gl350. The contact received notification of nhtsa campaign number: 16v081000 (air bags). The parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Mercedes-benz of virginia beach (4949 virginia beach blvd, virginia beach, va) was contacted and confirmed that the parts were not available for the recall remedy. The manufacturer was made aware of the issue and was not able to confirm when the parts were to become available. The contact had not experienced a failure. Vin tool confirms parts not available.
- Suspension
Getting message " malfunctioning" and compressor cooling down even though changing front struts and making roaring noise when car IS idle, and burnt smell inside car.
- Air bags
Takata recall, it has been over a year and a half since we've been advised of this potentially fatal situation regarding the recall and we don't want to drive the car but need it. this IS too long to wait.
- Air bags
TL* the contact owns a 2011 mercedes-benz gl350. The contact received notification of nhtsa campaign number: 16v081000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.
- Air bags
I was advised by mercedes 6 months ago that my air bag IS defective--or prone to hazard in an accident. they said there IS no remedy. I want the airbags deactivated but mercedes refuses
- Engine
Had a oil change by mercedes dealer park my truck for a few weeks when I drove it I had a oil leak. I call mercedes to report it mercedes had it tow in .they say it was a oil cooler leak I only have 48,000 miles don't drive it all the time. didn't have a leak until the oil change now they want…
Had a oil change by mercedes dealer park my truck for a few weeks when I drove it I had a oil leak. I call mercedes to report it mercedes had it tow in .they say it was a oil cooler leak I only have 48,000 miles don't drive it all the time. didn't have a leak until the oil change now they want me to pay for it.i had the truck park in my garage oil was on the floor in my garage I do have pictures of oil on the floor in my garage and around the engine where oil IS coming from.
- Seat belts
The left rear passenger seat belt IS broken. the mechanism will not retract. when I spoke with the mercedes dealership they said they have been seeing this problem, but there IS nothing that they can do. they only respond to recalls that nhtsa initiates. they would not replace the broken seat…
The left rear passenger seat belt IS broken. the mechanism will not retract. when I spoke with the mercedes dealership they said they have been seeing this problem, but there IS nothing that they can do. they only respond to recalls that nhtsa initiates. they would not replace the broken seat belt for free, because it IS not under warranty anymore even though the car only has 37,000 miles, because it IS 5 years old, the warranty was 50,000 or 4 years, whichever came first. We paid over $400 to replace the seatbelt because this IS a definite safety issue that needed to be addressed immediately. we have pictures and the original part in our possession. we know this IS a problem with this model and we hope you can issue a recall. thank you.
- Engine
Hello. My vehicle has experienced two severely elongated timing chains in 30,000 miles of driving. Total miles on the vehicle are 114,000, and the vehicle IS a 2011. I have been advised that if the timing chain fails during driving, it will cause an engine stall, and may potentially cause seizure…
Hello. My vehicle has experienced two severely elongated timing chains in 30,000 miles of driving. Total miles on the vehicle are 114,000, and the vehicle IS a 2011. I have been advised that if the timing chain fails during driving, it will cause an engine stall, and may potentially cause seizure of the transmission and wheels, causing a severe safety hazard. At a cost of approximately $8,000, the timing chain and all related timing components had been replaced approximately 15 months ago, and now, the problem has recurred. in speaking with others, this IS not an isolated incident; however, recurrence of the problem suggests to me that there IS an inherent defect in the engine that causes timing chains to fail.
- Engine
Own 2 mercedes gl350 and E350. Both of them are V6 diesel bluetec engines and both have leaking problem from oil cooler.
- Steering
TL* the contact owns a 2011 mercedes benz gl350. The contact was driving 25 mph and noticed an abnormal grinding noise as the power steering assist failed. The vehicle was towed to a dealer the steering system column was replaced however, the vehicle failure later recurred. The manufacturer was notified of the issue. The approximate failure mileage was 31,000.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010818Complaint Transmission control unit Y3/8n4 (fully integrated transmission control unit (VGS)) not listed in quick test and/or no communication possible with VGS. Cause Transmission control unit Y3/8n4 Remedy It is important that LI54.15-P-057373 is processed before replacing any component parts (transmission 722.9). After processing and complying with the above documents, perform a reset on the transmission control unit Y3/8n4 (VGS) (ignition reset), check that the transmission connector is seated correctly and inspect the PINs for concerns. If communication with the VGS cannot be established afterwards, the component part 'electrohydraulic controller unit (EHS)' must be replaced, as it is not possible to transfer the valve characteristics under the above-mentioned conditions. Installation of a VGS repair kit is not permitted in this case.
- 11009122Complaint Washer fluid system leaks Cause Various possible causes: 1. Washer fluid reservoir itself. 2. Seal on washer fluid pump/washer fluid reservoir. 3. Washer fluid pump. 3.1. Distributor housing leaks. 3.2. Pump fitting leaks. 3.3. Washer fluid hose cannot be snapped into place on pump fitting. 3.4. Washer fluid hose will not stay on pump fitting, although connector OK. 4. Washer fluid line. 4.1 Connector will not stay on pump fitting because it is broken. 4.2 Sealing ring in connector missing. 4.3 Sealing ring in connector fitted, but deformed and therefore leaks. 4.4 Damage to washer line by animal. 5. Seal on heating washer fluid reservoir/washer fluid reservoir. Remedy Replace defective component parts only. Do not replace any adjacent component parts that are intact. Note: Repair kits for washer line hoses do exist to allow patches for line damage.
- 11008880Complaint After a control unit replacement of "N112/9 - control unit for telematics services (HERMES)" or the "N112/2 - control unit for telematics services (RAMSES)", the Digital Extras (previously Mercedes me) cannot be activated. The DTC B15CE00 is active or active+saved. In vehicles with "N112/9 - control unit for telematics services (HERMES)": The message "SOS - service not activated" permanently lights up in the instrument cluster AND the actual value "Error when replacing certificate (CEP.36)" is displayed in the actual values for the activation status under "Registration status" (see picture 1). In the control unit log of the "N112/9 - control unit for telematics services (HERMES)", the registration error "CEP Invalid VIN/UniqueID combination" is displayed. In vehicles with "N112/2 - control unit for telematics services (RAMSES)": The actual value "Error when replacing certificate (CEP.36)" is displayed in the actual values for the activation status under "Registration status" (see picture 1). In the control unit log of the "N112/2 - control unit for telematics services (RAMSES)", the registration error "CEP_ VIN_UNIQUEID_INVALID" is displayed. The emergency call is not impaired. Cause In the event of a control unit replacement, sporadic problems in the back end could result in data from the new control unit not being updated in the back end system. Remedy Please create a TIPS case. In some cases, the problem rectifies itself on its own after a little while.
- 11008091Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21) in the headliner. C. Dirt inside the microphone housing Remedy 1. Press finger on rear of microphone (on adhesive tape) 2. Remove microphone cap from the front 3. Eliminate protruding material residues of the microphone cutout at the headliner, e.g. with a soldering iron. The microphone must be seated in the headliner as shown in picture "2". 4. Push microphone from behind until it is firmly pressed into the headliner 5. Maintain pressure and press/clip cap into microphone from the front. Note: The cover cap must be clearly heard and felt to engage. 6. This procedure must be carried out on both microphones (B25/20 and B25/21) Note: It is recommended to replace the cover caps. The non-woven cloth in the cover cap protects the microphone from soiling and must not be removed. NOTE: The information contained in this document is intended for use by trained, professional technicians with the knowledge to properly and safely perform diagnosis and repairs on Mercedes-Benz vehicles, using Mercedes-Benz approved tools and equipment. It informs service technicians about conditions that could occur in certain vehicles and provides information that could assist in proper vehicle diagnosis, service, or repair. It does not indicate that a defect is present in any vehicle referenced in this document nor does it imply warranty coverage. DO NOT assume that a symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or groups of vehicles, or that a described repair applies to any particular vehicle or groups of vehicles. There can be multiple causes resulting in the same or similar symptoms or conditions described in this document, and trained professional service technicians must use their diagnostic skills to make evaluations on a case-by-case basis. The information contained in this document does not guarantee warranty coverage nor does it extend the vehicles warranty in any way.
- 11008064In our continuing efforts to ensure the proper performance and quality of your vehicle, we are writing to inform you that on certain Model Year 2011-2018 C-Class, E-Class, S-Class, G-Class, CL, CLS, ML, GL, GLE, GLS, GLC, SL, and AMG GT vehicles with 6 and 8 cylinder gasoline engines, the software of the engine control unit may not meet current specifications. Under certain conditions, the catalyst heating might not work. Therefore, an Emission Service Campaign is being conducted to remedy the situation. Our records indicate that your vehicle is included in the affected population of vehicles.
- 11007974Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy In advance, observe LI82.10-P-078301 "Headlamps or Front Fog Lamps Leaking or Fogged". 1. Prepare headlamp/check for external damage: For headlamps with a closed system 1. Check the headlamps for any external damage and check also for correct seating of the Gore-diaphragm/correct latching of the cover caps. 2. If the headlamp exhibits any external damage, replace the headlamp. For headlamps with an open system 1. Check the headlamps for any external damage and seal off the vent then make sure the cover caps are latched correctly into place. 2. If the headlamp exhibits any external damage, replace the headlamp. Note: A headlamp with external damage is not a warranty or goodwill case. 2. Leak test of headlamp with overpressure: Connect test adapter to pressure tester. (Figure 1) Check test adapter for leak tightness. To do so, connect plug and coupling (picture 2) and apply a maximum overpressure of 30 mbar. The pressure must remain constant. If the pressure does not remain constant, use a new adapter. Seal all the outlet openings using sealing compound and the given diaphragm with the plunger (picture 3). (Picture 4) Make allowance for the different headlamp variants here (there are different outlet openings). Check if the headlamp needs to be removed to gain access to the diagnostic socket on the headlamp housing. Plug the adapter onto the diagnostic socket on the headlamp housing. (Picture 5). Apply a maximum of 30 mbar overpressure to the headlamp housing. Note: If the maximum overpressure of 50 mbar is exceeded the headlamp seal will be damaged. If a pressure drop of less than 10 mbar is measured within 30 seconds, the headlamp is not leaky and the problem is down to natural physical fogging. If a pressure drop of more than 10 mbar is measured within 30 seconds, the headlamp is leaky. Note: The leaky position can be localized with the aid of soap suds. Replace any leaky headlamps. Note: Desiccant packs can be installed for headlamps that are not leaky. See: LI82.10-P-064766 Fogged headlamp, desiccant pack installed - open ventilation system LI82.10-P-078304 Fogged headlamp, desiccant pack installed - closed ventilation system
- 11007753Complaint Headlamp or front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Headlamps comply with all applicable standards. If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Remedy Headlamp: Remedy 1 Clearing fogged/condensed LED headlamps and LED rear lamps: 1. Drive vehicle into workshop (temperature higher than +18 C/+64.4 F) and connect the exhaust extraction. Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the hood or trunk. 4. Switch on the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Clearing fogged/condensed halogen/xenon headlamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4F). Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine. 3. Open the hood. 4. Switch off the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Note: If there is no visible reduction in the formation of condensation, check the headlamp for a defect. (See Remedy 2) It is not physically possible to defog the headlamps completely. Fogging does not impair the operation or the service life of the headlamp. Remedy 2 A Damaged headlamp can be identified as follows: 1. Check the headlamp for external damage and that the cover caps and the diaphragm are correctly seated. 2. Check the electrical connectors of the plugs and pins. 3. Check for leak tightness in accordance with LI82.10-P-078307. The test can only be conducted on headlamps. 4. If the headlamp or the rear lamp has any external damage, replace the component part in accordance with the WIS instructions. Note: External damage to the headlamp/rear lamp or faulty seating of the cover caps does not present a warranty or goodwill case. With headlamps, it is possible to install desiccant packs if the problem occurs repeatedly. Open ventilation system: LI82.10-P-064766. Closed ventilation system LI82.10-P-078304
- 11006658Mercedes-Benz AG ("MBAG"), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (MY) C-Class, E-Class, S-Class, G-Class, CL, CLS, ML, GL, GLE, GLS, GLC, SL, and AMG GT (204, 205, 207, 212, 213, 217, 221, 222, 463, 216, 218, 166, 292, 253, 231, and 190 platforms) vehicles with 6 and 8 cylinder gasoline engines, the software of the engine control unit may not meet current specifications. Under certain conditions, the catalyst heating might not work. MBUSA will conduct an Emission Service Campaign. An authorized Mercedes-Benz dealer will update the engine control unit software on the affected vehicles. Affected customers will be notified via First Class letter to have the update performed on their vehicle.
- 11005294Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation -> a significant reduction in the formation of condensation must be clearly recognizable (defogging progress).
- 10248173Mercedes-Benz AG ("MBAG"), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (MY) 2009-2012 GL-Class, ML-Class, R-Class, and S-Class (164/166, 251, 221 platforms) vehicles, the coding for the engine control unit does not correspond to the specifications as part of the BlueTEC update diesel field measure (aka Emission Modification). This could result in the VIN number not being read out from the vehicle. This could affect the vehicle smog check. MBUSA will conduct an Emission Service Campaign in which an authorized Mercedes-Benz dealer will update the SCN coding for the engine control unit on the affected vehicles.
- 10248162Crease formation on genuine leather seat covers in vehicles with low mileage Objects left on the seats for extended periods of time (pressure marks). Objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle). Light initial creases due to vehicle handling. Light creases in the outer covers originating from the production process (missing finish). Heat treatment of the seat covers using heat gun and plastic wedge. Be very careful to not overheat the seat material!
- 10235996Additional information around the recent recall announcement affecting approximately 705,983 Mercedes-Benz passenger vehicles involving Takata driver-side airbags containing PSDl-5 type inflators
- 10205249No cooling output, fault code 9006 stored in air conditioning control unit.
- 10187781To enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, Mercedes-Benz USA, LLC (MBUSA) has entered into a settlement regarding claims relating to allegations that the ?590 Mars Red? paint available as an original, exterior color option for certain models of Mercedes-Benz vehicles may experience peeling, flaking, or bubbling of the exterior paint or clear coat. This ?Mars Red? paint is sometimes referred to as ?Fire Opal.? A motion for approval of the settlement was filed with the Court on December 21, 2020. The settlement must receive final approval from the court before it takes effect. As part of the settlement, MBUSA has agreed to offer sliding-scale warranty coverage for certain vehicles to repaint any non-plastic exterior surface of a Subject Vehicle because of peeling, flaking, or bubbling of the exterior paint or clear coat. This warranty coverage does not cover repainting necessitated by external influences such as automobile accidents, scratches, or road debris. Warranty coverage will not take effect until the settlement is judicially approved and other events occur. If the settlement becomes effective, coverage will include inspection of the vehicle to diagnose the possible cause of any observed peeling, flaking, or bubbling of the exterior paint or clear coat.
- 10176670To enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, Mercedes-Benz USA, LLC (MBUSA) has entered into a settlement regarding claims relating to alleged mold and mildew type odors originating from the HVAC system in certain Mercedes-Benz vehicles. As part of the settlement, MBUSA has agreed to offer sliding-scale warranty coverage for certain vehicles diagnosed as having mold or mildew type odors originating from the HVAC system?although that coverage will not take effect until the settlement is judicially approved and other events occur; likely not until December 7, 2020 at the earliest (see below). If the settlement becomes effective, coverage will include cleaning of the evaporator and replacement of the HVAC filters
- 10171637Retrofitted front door exit lamps with logo projection flicker
- 10167564Customer experiences low battery conditions, resulting in jump starts, and eventually requiring battery replacement.
- 10167563The COMAND unit does not start or the COMAND display remains dark. The COMAND unit cannot be operated. Note: The problem disappears after a lengthy idle period (>6h) or after interrupting the power supply (circuit 30).
- 10167553Combination message: "Clean fuel filter" is displayed. The fault code 162500 (water level message - Bosch) or P226997 (water level message - Delphi) or 171600 (filter load - Bosch) is stored in the engine control unit.
- 10167546FC 2783 (Friction power of torque converter lockup clutch is too high) or FC 0741 (Actuation of torque converter lockup clutch not possible) stored in transmission control unit. One possible additional customer complaint could be "poor acceleration" e.g. due to engine intervention. This can affect all NAT2FE+ (7G-TRONIC PLUS) vehicles with engines OM651, OM642LS and M278 in the production period from 04/2011 to 02/2012 and with more than 10,000 km. The two fault codes can also occur in combination with rpm sensor faults (see also GI27.50-P-035556). The rpm sensor fault is not connected with this complaint.
- 10167487Minor leaks at the oil duct of the left or right cylinder head of engines 157, 276 and 278. 1. Left cylinder head: Oil passage plug hole on left beside mechanical vacuum pump. 2. Right cylinder head: Oil passage plug hole below high-pressure pump housing.
- 10167040This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has determined that the mbrace software does not correspond to current production configuration. An authorized Mercedes-Benz dealer will update the mbrace control module software at the next workshop visit.
- 10166988Collision Prevention Assist (CPA) may warn for no obvious reason (optical and/or acoustic warning message).
- 10166976Message in instrument cluster "DISTRONIC PLUSCurrently Unavailable - See Owner's Manual"
- 10166975This Customer 1 Action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the Verizon Telematics systems. If the i-button call failed or if the customer was unable to perform the i-button call, the mbrace agent instructed the customer to make an appointment with their dealer to have the issue corrected and/or i-button call performed. The vehicles impacted range from model year 2002 to 2014.
- 10166097Electric motor for the folding rear backrest of the 3rd seat row is inoperative or makes noises during adjustment
- 10166096The release loop of the Easy Entry seat in the 2nd seat row is awkward to operate as it is difficult to access
- 10135716Headlamp lights up sporadically
- 101356252nd seat row Power Easy Entry function impairment of backrest folding
- 10059536Summary to be provided on a future date.
- 10056472Xentry (mercedes): after engine has started, several issues occurs, an acoustic warning sounds IS heard, the instrument cluster displays warning message power steering malfunction, service required. Steering system IS sluggish. Model 117, 156, 176, 242, 246.
Every Mercedes-Benz GL350 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.