2012 Mercedes-Benz GLK350
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mercedes-Benz › GLK350 › 2012
These records cover every 2012 Mercedes-Benz GLK350. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2012 Mercedes-Benz GLK350. Newest first.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2014 C250, C300 4Matic, C350, C63 AMG, E350 4Matic Coupe, E350 Cabrio, E350 Coupe, SLS AMG Cabrio, SLS AMG Coupe, 2014-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe, C63 AMG Coupe, GLK 350, GLK250 BlueTec 4Matic, GLK350 RWD, 2015-2017 E400 4Matic Coupe, E400 Cabrio, E400 Coupe, 2014-2017 E550 Cabrio, and…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the passenger or other occupants resulting in serious injury or death.
Remedy
MBUSA will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall began March 29, 2019. Owners may contact MBUSA customer service at 1-800-367-6372.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2012 C300 4Matic, C250, C250 Coupe, C350, C350 Coupe 4Matic, C350 Coupe, C63 AMG, C63 AMG Coupe, E350 Coupe 4Matic, E350 Cabrio, E350 Coupe, E550 Cabrio, E550 Coupe, GLK350 4Matic, GLK350, SLS AMG Cabrio, and SLS AMG Coupe vehicles originally sold, or ever registered, in Alabama, California, Florida…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
MBUSA will notify owners, and dealers will replace the front passenger air bag modules, free of charge. Owners were sent an interim notification in March 2017. Second notices started going out in October 2018 and continue to be mailed as parts become available. Owners may contact MBUSA customer service at 1-877-496-3691
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2009-2010 ML320 BlueTec 4Matic, GL320 BlueTec 4Matic and R320 CDI 4Matic, 2011 E350 Cabriolet and E550 Cabriolet, 2009-2011 ML350, ML350 4Matic, ML550 4Matic, ML63 AMG, and C63 AMG, 2010-2011 ML450 4Matic Hybrid, E350 Coupe, E350 4Matic, E550 Coupe, E550 4Matic, and E63 AMG, 2011-2012 GL350…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
MBUSA will their notify owners, and Fiat Chrysler will notify the affected Chrysler owners. Dealers for the respective brands will replace the driver's frontal air bag module, free of charge. This recall began November 2016. Mercedes-Benz owners may contact MBUSA customer service at 1-800-367-6372 and Chrysler owners may contact Fiat Chrysler customer service at 1-800-853-1403.
Mercedes-Benz is recalling certain model year 2011-2012 S400, S550, S550 4Matic, S63 AMG, C300, C300 4Matic, E350, GLK350, GLK350 4Matic, CL550 4Matic, and CL63 AMG vehicles manufactured from April 18, 2011, through July 12, 2011. Due to an irregularity stemming from the molding process of the fuel filter flange, the fuel filter flange may crack when…
Risk and remedy
Risk
If the fuel filter flange cracks, it will leak fuel which may lead to a fire if an external ignition source is present.
Remedy
Mercedes-Benz will notify owners, and dealers will replace the fuel filter, free of charge. The recall campaign is expected to begin in February 2013. Owners may contact Mercedes-Benz at 1-800-367-6372.
Owner complaints
167 complaints5 involved a crash3 injuries
What owners report most
Latest complaints
- Air bags · Seat belts
On August 17, 2025 I rearended a vehicle in front of me who jammed on their brakes for no apparent reason. We were the only two vehicles in the area. Upon impact, the following airbags deployed....steering wheel, driver knee airbag. I sustained injuries to my lower extremities from the exploded…
On August 17, 2025 I rearended a vehicle in front of me who jammed on their brakes for no apparent reason. We were the only two vehicles in the area. Upon impact, the following airbags deployed....steering wheel, driver knee airbag. I sustained injuries to my lower extremities from the exploded knee airbag which contained metal components that impaled my skin. I continue to receive treatment for multiple injuries and the wounds that have not healed. My safety was at risk due to the metal components (shrapnel) deployed via the exploded knee airbag. I also sustained injuries my left wrist from the steering wheel airbag, and my left chest from the tightening of the seatbelt. The local Mercedes Benz dealer recently towed the vehicle from my home address to their facility for inspection of said airbags. As of today, I have not received any report from MBUSA.
- Suspension
I brought my car in to my local mechanic and was told my rear suspension was corroded. He said it would cost around five thousand dollars to repair. I researched online and found mercedes did not have a recall but has extended the warranty and will cover the repair to the rear suspension. The…
I brought my car in to my local mechanic and was told my rear suspension was corroded. He said it would cost around five thousand dollars to repair. I researched online and found mercedes did not have a recall but has extended the warranty and will cover the repair to the rear suspension. The mercedes dealer called me and told me my brake lines were rusted out and needed replacement and that it was not covered by the extended warranty and would cost thirty five hundred dollars. In all my years of driving, I have never had the brake lines rust out on a vehicle and can't imagine that this is not related to the suspension issue. I have done some research and seen many mercedes owners have had the same complaint. I believe mercedes benz should be responsible for this repair just like they are responsible for the corrosion with the rear suspension.
- Seats
My passenger got 2 degree burns to his right buttocks and seat is melted ...he is a paralyzed patient i took him to the er and the burn center i have pictures and documentation....my guess the seat got to hot melted and burned him this what doctors concluded the is very scary for a seat to burn the skin off your butt
- Power train · Wheels
Driveshaft broke, peeling rims
- Seats · Unknown or other
The seats on both the passenger and driver size has split at the seams. They began to appear in 2012. The battery failed and the car would not start. Periodically the car starts up slow. The car bucks in a hard motion when trying to accelerate. The car makes a grinding noise, with a dragging feeling, while driving. Mechanics cannot figure out what or where the sound and feeling is coming from.
- Steering
Electronic steering wheel lock is broken and engine will not start because of lock.
- Fuel/propulsion system
I smelled gasoline in my car didn’t think of anything . Till today when i pumped gas it smelled very strong got home parked my car i notice a leak i look closer under and it’s leaking gas .just got this car 2 months ago There was a safety recall about this issue back in 2013 and I was not sure if this issue was corrected before on my vehicle and think this needs to be recalled again. Please investigate
- Service brakes
Rupture of left rear and left front brake lines 1/26/24,8/30/24. Both times the failure was unannounced while driving the car and put my life in danger.
- Service brakes · Suspension
My rear subframe is rotted out but won't be replaced under warranty because there are no rust holes in the metal. The rust is very extensive, and the car isn't safe to drive. The rear metal brake lines are also rotten and need to be replaced. I've owned many cars older than this one with more miles, and I've never had rusted-out brake lines. This is a safety issue.
- Fuel/propulsion system
I smell gasoline every time I fill up the gas tank and don't smell it when not quite full. I haven't check yet but I think that the fuel pump flange has deteriorated. My co-worker has the same exact issue and he found out that it was the fuel pump flange. There was a safety recall about this…
I smell gasoline every time I fill up the gas tank and don't smell it when not quite full. I haven't check yet but I think that the fuel pump flange has deteriorated. My co-worker has the same exact issue and he found out that it was the fuel pump flange. There was a safety recall about this issue back in 2013 and I was not sure if this issue was corrected before on my vehicle and think this needs to be recalled again. Please investigate. Thank you. Sincerely,
- Fuel/propulsion system
Evap small leak P0456 Car cabin smells strong gas odor check engine light is on
- Electrical system
The plastic trim/cover that wraps around the steering wheel column and is the same color as the seats and interior heats up, melts, becomes brittle after the fact but could is fire hazard, especially with melting plastic falling into the driver’s feet and/or carpeting. When I googled the…
The plastic trim/cover that wraps around the steering wheel column and is the same color as the seats and interior heats up, melts, becomes brittle after the fact but could is fire hazard, especially with melting plastic falling into the driver’s feet and/or carpeting. When I googled the replacement part, I found out on The Internet that owners across America have had the same problem with their vehicles regardless of the year or model. Some believe there is a shortage in the wiring that allows the steering wheel to be raised, lowered, pushed away or brought closer to the driver. There should definitely be an investigation at the least and then a service bulletin and recall as a fire could definitely occur.
- Fuel/propulsion system
My mercedes GLK 350 4matic has a strong gas smell every time I fill up and I am afraid to park in my garage because of the very strong gas smell, and I am afraid of a fire.
- Steering · Unknown or other
Drove to a parking lot turn the car off, the steering wheel did not lock, and when trying to start the car nothing happened. The car was dead other than door locks and a few things like the radio. Found out on YouTube how to start the car. After starting the car the steering wheel had a clicking…
Drove to a parking lot turn the car off, the steering wheel did not lock, and when trying to start the car nothing happened. The car was dead other than door locks and a few things like the radio. Found out on YouTube how to start the car. After starting the car the steering wheel had a clicking noise as it turned right to left and it would occasionally lock. After turning the wheel left and right a couple of times I was able to steer the car. We drove the car 2 miles to our home and along the way while turning the steering wheel would lock. Repeated the same process right to left and it let me steer again. Went slowly down the road with the flashers on and managed to get it home into the garage. I would not let anyone drive a car like this totally unsafe. There are no recalls which is unbelievable since there are many many instances online of the same thing or similar happening to other people. The manufacturer should be forced to replace or repair with better quality components. I am afraid to replace these parts for fear it will just happen again as is the case with many people I read about online. I intend to disable this anyway I can so I can continue to use this car. Please step in and insist Mercedes-Benz corrects this obvious problem. I hope you can.
- Fuel/propulsion system
My 2012 GLK350 leaking gas from under the rear right passenger seat, where the gas cap located. we fill up gas when we came back to home and park in the garage gas smell was very strong We thought may be because of spill some gas while Pumping. Next day gas smell was still strong inside of garage.…
My 2012 GLK350 leaking gas from under the rear right passenger seat, where the gas cap located. we fill up gas when we came back to home and park in the garage gas smell was very strong We thought may be because of spill some gas while Pumping. Next day gas smell was still strong inside of garage. I found gas leaking from under the rear right passenger seat. gas was dripping on the plastic cover Panel. I started google to find out what is the problem. Then I found NHTSA recall document #12V-557 regarding this problem, the Document specifically indicate and explained about faulty fuel filter flange might crack to leak gas fuel.it stated certain Model Year 2011-2012 GLK350.So I went House of import MB dealer service advisor [XXX] inspected car briefly then he checked MB recall status of my car. he said my car gas leak problem is not on recall list So they can't not repair under recall program. But he said there is another program that may cover it. I was confused and very upset . because there recall is exactly same as my problem I didn't understand why my car was not included on recall . they are going to inspect my car to see find out what is problem first. I like to report to NHTSA let you know my was leaking gas just like other recall Let you included in recall list Thankyou very much sincerely yours [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Fuel system, gasoline
The contact owns a 2012 Mercedes-Benz GLK350. The contact stated that the vehicle was leaking fuel underneath the rear-end of the vehicle. The failure occurred intermittently; however, the leak was now more frequent. The contact took the vehicle to a certified mechanic who diagnosed and related the…
The contact owns a 2012 Mercedes-Benz GLK350. The contact stated that the vehicle was leaking fuel underneath the rear-end of the vehicle. The failure occurred intermittently; however, the leak was now more frequent. The contact took the vehicle to a certified mechanic who diagnosed and related the failure to NHTSA Campaign Number: 12V557000 (Fuel System, Gasoline) however, the VIN was not included. The vehicle had not been repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 120,000.
- Air bags · Electrical system · Service brakes
The component or system failed or malfunctioned: Brake pedal -does not brake effectively Engine :Alternator/ignition-the car would not start on me Cigarette lighter: front cigarette lighter does not work (greater fuse or electrical problem Inspection: Car was returned to Hawthorne Auto Square for…
The component or system failed or malfunctioned: Brake pedal -does not brake effectively Engine :Alternator/ignition-the car would not start on me Cigarette lighter: front cigarette lighter does not work (greater fuse or electrical problem Inspection: Car was returned to Hawthorne Auto Square for repair and ultimately returned and sale of the used car was cancelled due to these issues. Please inspect car at Hawthorne Auto Square 11646 Prairie Ave, Hawthorne, CA 90250. Please do not allow Hawthorne Auto Square to resell this car it is a hazard to all Safety of myself and others were put at risk: - when attempting to brake, the car does not stop in a safe distance (dangerous can cause car crash) ( this happens to many GLK 250s) -the car is not starting after being started(dangerous if driving and cuts off in traffic and causes accident) air bag disabled -light coming on in car( if airbags that dont work someone could die) -electrical wire-there is a loose electrical wire in the trunk of the car that could shock someone cigarette lighter- front cigarette lighter does not work ( this happens to many GLK 250s) axle- appeared faulty -causing the car to wobble( this happens to many GLK 250s) -Car has problem and has not been reproduced or confirmed by a dealer or independent service center -Car has not been inspected by the manufacturer, police, insurance representatives or others. No warning lamps, messages or other symptoms of the problem prior to the failure I noticed the problems around 3/30/2022 In addition: Mercedes Benz all GLK 250s need; Advanced driver assistance systems , lane departure and Advanced emergency braking system (AEBS)
- Fuel/propulsion system
Every time the car's tank is filled with gas some leaks out on the ground. There is also a strong smell of gas in the cabin. I see there are many other complaints concerning this issue. Will someone please take action and force Mercedes Benz to fix this defective product.
- Fuel/propulsion system
I have a Mercedes GLK 350 .When I fill up the gas tank in full I can smell gas. I called the dealer and they refused to fix it because there is no recall in Mercedes GLK 350 and it is not covered by emission warranty. They will charge me $200 just to diagnose the problem
- Fuel/propulsion system · Suspension
Excessive fuel fume/smell inside the cabin and outside of the car particularly on full tank. stabilizer bar links producing drive instability.
- Unknown or other
I was driving on I35 at the speed limit when I heard a loud pop overhead. I was not sure what it was, wondered if it was gun fire. A few days later when I got in my vehicle, and the sun was out, I was closing the sunroof cover when I noticed that the glass was shattered, pieces of glass were everwhere and began falling with the movement of the cover. It IS extremely dangerous as shreds of glass are everywhere.
- Fuel/propulsion system · Unknown or other
Strong fuel/gas smell notice everytime fuel tank filled up, strong gas smell or odor notice inside the cabin and outside for days or until fuel used and go down to certain level. Also notice leaking on the wiper fluid tank/reservoir when filling up.
- Engine · Power train · Suspension
Car shuttered when accelerating , vibrates when at stop lights. got inspection torque converter clutch slipping dealership recommend transmission replacement based on mileage 150K. Oil cooler leaking, centrifuge leaking, motor mounts collapsed. Mb IS aware of issue, but only want to address…
Car shuttered when accelerating , vibrates when at stop lights. got inspection torque converter clutch slipping dealership recommend transmission replacement based on mileage 150K. Oil cooler leaking, centrifuge leaking, motor mounts collapsed. Mb IS aware of issue, but only want to address certain vins. Mb corp suggested I contact the dealership to get corrected only assistance they offered incentive buy a new car. Seen many service bulletins on this issue.
- Electrical system · Electronic stability control (esc) · Steering
[Xxx] steering lock failure should be a recall. Mercedes charges $1100 to replace mine and everything I've read ppl are all having same common issues. I had no issues until after my car was hit in front when someone backed into me (very hard that IS). Suddenly many lights on dash came on and next…
[Xxx] steering lock failure should be a recall. Mercedes charges $1100 to replace mine and everything I've read ppl are all having same common issues. I had no issues until after my car was hit in front when someone backed into me (very hard that IS). Suddenly many lights on dash came on and next steering lock failure. Ins co said that mercedes mechanic supervisor said it didn't happen from accident.. And that it's common with these mercedes bc they are lemons!!! redacted to protect personally identifiable information pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6) *cc
- Unknown or other
This IS a health and safety issue regarding my car. There IS mold build up in the ac system, which IS a health and safety and environmental issue, this car IS dangerous to the health if my family, especially to my son with asthma. Mold causes many health problems, and this car should not be driven.…
This IS a health and safety issue regarding my car. There IS mold build up in the ac system, which IS a health and safety and environmental issue, this car IS dangerous to the health if my family, especially to my son with asthma. Mold causes many health problems, and this car should not be driven. There IS a class action lawsuit against the manufacturer but the dealer said they cant do anything about it right now to fix the problem. so our health IS at risk everytime we get into the car. I can't afford to buy a new car. Getting a different car isn't an option unless this one can be bought back. *tr
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010818Complaint Transmission control unit Y3/8n4 (fully integrated transmission control unit (VGS)) not listed in quick test and/or no communication possible with VGS. Cause Transmission control unit Y3/8n4 Remedy It is important that LI54.15-P-057373 is processed before replacing any component parts (transmission 722.9). After processing and complying with the above documents, perform a reset on the transmission control unit Y3/8n4 (VGS) (ignition reset), check that the transmission connector is seated correctly and inspect the PINs for concerns. If communication with the VGS cannot be established afterwards, the component part 'electrohydraulic controller unit (EHS)' must be replaced, as it is not possible to transfer the valve characteristics under the above-mentioned conditions. Installation of a VGS repair kit is not permitted in this case.
- 11009122Complaint Washer fluid system leaks Cause Various possible causes: 1. Washer fluid reservoir itself. 2. Seal on washer fluid pump/washer fluid reservoir. 3. Washer fluid pump. 3.1. Distributor housing leaks. 3.2. Pump fitting leaks. 3.3. Washer fluid hose cannot be snapped into place on pump fitting. 3.4. Washer fluid hose will not stay on pump fitting, although connector OK. 4. Washer fluid line. 4.1 Connector will not stay on pump fitting because it is broken. 4.2 Sealing ring in connector missing. 4.3 Sealing ring in connector fitted, but deformed and therefore leaks. 4.4 Damage to washer line by animal. 5. Seal on heating washer fluid reservoir/washer fluid reservoir. Remedy Replace defective component parts only. Do not replace any adjacent component parts that are intact. Note: Repair kits for washer line hoses do exist to allow patches for line damage.
- 11008323Complaint Headlamps fogged or droplets forming. Cause Due to its outlet openings, the headlamp is an "open system". This means that acidic gases, moisture, dirt and exhaust gases can penetrate into the headlamp. This can lead to the formation of condensation on the lens of the headlamp. The headlamps comply with all applicable US standards and regulations. Remedy Check housing cover of lamp unit for natural fogging or condensation as per LI82.10-P-078301. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. Note: Order service covers and desiccant packs based on the validity description. 1. Remove headlamps. 2. Remove all grommets from outlet openings. 3. Seal vent openings with sealing profile. Important: All openings must be sealed carefully for the pressure compensation diaphragm to work properly! 4. Remove existing service cover. 5. Place desiccant packs into the new service covers and bolt down (Picture_01). 6. Glue the new diaphragm onto the intended surface at the service cover (Picture_02). Note: The bonding surface must be clean and dry. 7. Attach service cover with desiccant pack at headlamp. 8. Install headlamp. To ensure that the desiccant pack (absorption) acts effectively, the headlamp has to be air-sealed. Observe or check the following points for this: 1. Seals at the central connector must all be present and correctly fitted (Picture_03). 2. The new transparent diaphragm must be correctly bonded (Picture_04). 3. Check headlamp housing for any external damage.
- 11008091Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21) in the headliner. C. Dirt inside the microphone housing Remedy 1. Press finger on rear of microphone (on adhesive tape) 2. Remove microphone cap from the front 3. Eliminate protruding material residues of the microphone cutout at the headliner, e.g. with a soldering iron. The microphone must be seated in the headliner as shown in picture "2". 4. Push microphone from behind until it is firmly pressed into the headliner 5. Maintain pressure and press/clip cap into microphone from the front. Note: The cover cap must be clearly heard and felt to engage. 6. This procedure must be carried out on both microphones (B25/20 and B25/21) Note: It is recommended to replace the cover caps. The non-woven cloth in the cover cap protects the microphone from soiling and must not be removed. NOTE: The information contained in this document is intended for use by trained, professional technicians with the knowledge to properly and safely perform diagnosis and repairs on Mercedes-Benz vehicles, using Mercedes-Benz approved tools and equipment. It informs service technicians about conditions that could occur in certain vehicles and provides information that could assist in proper vehicle diagnosis, service, or repair. It does not indicate that a defect is present in any vehicle referenced in this document nor does it imply warranty coverage. DO NOT assume that a symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or groups of vehicles, or that a described repair applies to any particular vehicle or groups of vehicles. There can be multiple causes resulting in the same or similar symptoms or conditions described in this document, and trained professional service technicians must use their diagnostic skills to make evaluations on a case-by-case basis. The information contained in this document does not guarantee warranty coverage nor does it extend the vehicles warranty in any way.
- 11007974Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy In advance, observe LI82.10-P-078301 "Headlamps or Front Fog Lamps Leaking or Fogged". 1. Prepare headlamp/check for external damage: For headlamps with a closed system 1. Check the headlamps for any external damage and check also for correct seating of the Gore-diaphragm/correct latching of the cover caps. 2. If the headlamp exhibits any external damage, replace the headlamp. For headlamps with an open system 1. Check the headlamps for any external damage and seal off the vent then make sure the cover caps are latched correctly into place. 2. If the headlamp exhibits any external damage, replace the headlamp. Note: A headlamp with external damage is not a warranty or goodwill case. 2. Leak test of headlamp with overpressure: Connect test adapter to pressure tester. (Figure 1) Check test adapter for leak tightness. To do so, connect plug and coupling (picture 2) and apply a maximum overpressure of 30 mbar. The pressure must remain constant. If the pressure does not remain constant, use a new adapter. Seal all the outlet openings using sealing compound and the given diaphragm with the plunger (picture 3). (Picture 4) Make allowance for the different headlamp variants here (there are different outlet openings). Check if the headlamp needs to be removed to gain access to the diagnostic socket on the headlamp housing. Plug the adapter onto the diagnostic socket on the headlamp housing. (Picture 5). Apply a maximum of 30 mbar overpressure to the headlamp housing. Note: If the maximum overpressure of 50 mbar is exceeded the headlamp seal will be damaged. If a pressure drop of less than 10 mbar is measured within 30 seconds, the headlamp is not leaky and the problem is down to natural physical fogging. If a pressure drop of more than 10 mbar is measured within 30 seconds, the headlamp is leaky. Note: The leaky position can be localized with the aid of soap suds. Replace any leaky headlamps. Note: Desiccant packs can be installed for headlamps that are not leaky. See: LI82.10-P-064766 Fogged headlamp, desiccant pack installed - open ventilation system LI82.10-P-078304 Fogged headlamp, desiccant pack installed - closed ventilation system
- 11007753Complaint Headlamp or front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Headlamps comply with all applicable standards. If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Remedy Headlamp: Remedy 1 Clearing fogged/condensed LED headlamps and LED rear lamps: 1. Drive vehicle into workshop (temperature higher than +18 C/+64.4 F) and connect the exhaust extraction. Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the hood or trunk. 4. Switch on the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Clearing fogged/condensed halogen/xenon headlamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4F). Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine. 3. Open the hood. 4. Switch off the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Note: If there is no visible reduction in the formation of condensation, check the headlamp for a defect. (See Remedy 2) It is not physically possible to defog the headlamps completely. Fogging does not impair the operation or the service life of the headlamp. Remedy 2 A Damaged headlamp can be identified as follows: 1. Check the headlamp for external damage and that the cover caps and the diaphragm are correctly seated. 2. Check the electrical connectors of the plugs and pins. 3. Check for leak tightness in accordance with LI82.10-P-078307. The test can only be conducted on headlamps. 4. If the headlamp or the rear lamp has any external damage, replace the component part in accordance with the WIS instructions. Note: External damage to the headlamp/rear lamp or faulty seating of the cover caps does not present a warranty or goodwill case. With headlamps, it is possible to install desiccant packs if the problem occurs repeatedly. Open ventilation system: LI82.10-P-064766. Closed ventilation system LI82.10-P-078304
- 11005294Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation -> a significant reduction in the formation of condensation must be clearly recognizable (defogging progress).
- 10252770As previously reported, to enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, Mercedes-Benz USA, LLC (MBUSA) has entered into a Settlement regarding claims relating to allegations that the 590 Mars Red paint available as an original, exterior color option for certain models of Mercedes-Benz vehicles may experience peeling, flaking, or bubbling of the exterior paint or clear coat. This Mars Red paint is sometimes referred to as Fire Opal. The purpose of this update is to alert you that: 1. The Settlement has received final approval. The Settlement will go into effect on March 11, 2024. As of that date, customers are eligible to receive extended warranty coverage under the Settlement. 2. Under the Settlement, an eligible customer might receive extended warranty coverage as of the date the vehicle is presented to your dealership OR certain customers might have validated Qualified Future Repair claims, making them eligible for a different level of coverage. To determine if a customer: (a) is eligible for extended warranty coverage; and (b) what level of warranty coverage is available to them, please refer to the Service Packages section in VMI/Netstar. 3. Damage code 21800 (damage type 00) must be used for warranty claims covered pursuant to the Settlement. Please note that you should only claim for the percentage of warranty repair cost reflected in VMI/Netstar (see below, e.g., for Period Two, claim only 50% of warranty repair cost). 4. Before the dealership agrees to perform any work: The customer should be given a Repair Order containing: (1) an estimate for the repair, (2) the portion covered under the extended warranty; and (3) the customers contribution amount for the repair, if applicable. The customer must agree to pay their contribution amount for the repair and sign the Repair Order before the repair is performed.
- 10248162Crease formation on genuine leather seat covers in vehicles with low mileage Objects left on the seats for extended periods of time (pressure marks). Objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle). Light initial creases due to vehicle handling. Light creases in the outer covers originating from the production process (missing finish). Heat treatment of the seat covers using heat gun and plastic wedge. Be very careful to not overheat the seat material!
- 10235996Additional information around the recent recall announcement affecting approximately 705,983 Mercedes-Benz passenger vehicles involving Takata driver-side airbags containing PSDl-5 type inflators
- 10235978Recall Campaign announcement for Takata driver airbags.
- 10233796Mercedes-Benz USA, LLC (MBUSA) has extended the warranty for the rear subframe on the vehicles listed below, from the original New Vehicle Limited Warranty of 4 years/50,000 miles to 20 years/unlimited miles, and applies to the vehicle regardless of ownership. This warranty extension applies to the replacement of the rear subframe under the standard warranty terms and conditions in the even the subframe experiences corrosion with perforation (holes). The extended warranty is applicable to the following vehicles: Model Year Model (platform) WIS reference 2005 - 2011 SLK-Class (R171) AR35.10-P-0010V 2012 - 2017 SLK-Class (R172) AR35.10-P-0010V 2012 - 2016 CLS-Class (C218) AR35.10-P-0010EW 2013 - 2016 SL-Class (R231) AR35.10-P-0010RK 2008 - 2015 C-Class Sedan/Coupe (W/C204) AR35.10-P-0010CW 2010 - 2015 GLK-Class (X204) AR35.10-P-0010CW 2010 - 2016 E-Class Sedan/Wagon (W/S212) AR35.10-P-0010EW 2010 - 2017 E-Class Coupe/Cabrio (C/A207) AR35.10-P-0010CW All models require cavity preservation on the rear axle carrier after the replacement according to AR35.10-P-0010-03A.
- 10233780Mercedes-Benz USA, LLC (MBUSA) has extended the warranty for the rear subframe on the vehicles listed below, from the original New Vehicle Limited Warranty of 4 years/50,000 miles to 20 years/unlimited miles, and applies to the vehicle regardless of ownership. This warranty extension applies to the replacement of the rear subframe under the standard warranty terms and conditions in the event the subframe experiences corrosion with perforation (holes). The extended warranty is applicable to the following vehicles: Model Year Model (platform) WIS reference 2005 - 2011 SLK-Class (R171) AR35.10-P-0010V 2012 - 2017 SLK-Class (R172) AR35.10-P-0010V 2012 - 2016 CLS-Class (C218) AR35.10-P-0010EW 2013 - 2016 SL-Class (R231) AR35.10-P-0010RK 2008 - 2015 C-Class Sedan/Coupe (W/C204) AR35.10-P-0010CW 2010 - 2015 GLK-Class (X204) AR35.10-P-0010CW 2010 - 2016 E-Class Sedan/Wagon (W/S212) AR35.10-P-0010EW 2010 - 2017 E-Class Coupe/Cabrio (C/A207) AR35.10-P-0010CW All models require cavity preservation on the rear axle carrier after the replacement according to AR35.10-P-0010-03A.
- 10232321Mercedes-Benz USA, LLC (MBUSA) has extended the warranty for the rear subframe on the vehicles listed below, from the original New Vehicle Limited Warranty of 4 years/50,000 miles to 20 years/unlimited miles, and applies to the vehicle regardless of ownership. This warranty extension applies to the replacement of the rear subframe under the standard warranty terms and conditions in the event the subframe experiences corrosion with perforation (holes). The extended warranty is applicable to the following vehicles: Model Year Model (platform) Model Year Model (platform) 2005 - 2011 SLK-Class (R171) 2008 - 2015 C-Class Sedan/Coupe (W/C204) 2012 - 2017 SLK-Class (R172) 2010 - 2015 GLK-Class (X204) 2012 - 2016 CLS-Class (C218) 2010 - 2016 E-Class Sedan/Wagon (W/S212) 2013 - 2016 SL-Class (R231) 2010 - 2017 E-Class Coupe/Cabrio (C/A207) Only the following damage code can be claimed for the replacement of the rear subframe due to corrosion with perforation: Damage Code: 35441 47 Always check VMI to determine if a vehicle is covered under this 20 years/unlimited miles extended warranty. Please
- 10205790After starting the engine, the instrument cluster shows the "EBD not available, diagnosis/test stand" message in yellow.
- 10205265Outside mirror fogged.
- 10205237The COMAND unit does not start or the display remains dark.
- 10205236"Metadata loss- Please reimport all media data".
- 10205233Mobile phone cotacts are not transferred completely.
- 10205225Headlamps fogged.
- 10205215Window lifter and outside mirror on passenger side malfunction after replacement of door control unit.
- 10205147Ticking or pulsing noise from high-pressure pump and/or fuel injectors.
- 10176670To enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, Mercedes-Benz USA, LLC (MBUSA) has entered into a settlement regarding claims relating to alleged mold and mildew type odors originating from the HVAC system in certain Mercedes-Benz vehicles. As part of the settlement, MBUSA has agreed to offer sliding-scale warranty coverage for certain vehicles diagnosed as having mold or mildew type odors originating from the HVAC system?although that coverage will not take effect until the settlement is judicially approved and other events occur; likely not until December 7, 2020 at the earliest (see below). If the settlement becomes effective, coverage will include cleaning of the evaporator and replacement of the HVAC filters
- 10167553Combination message: "Clean fuel filter" is displayed. The fault code 162500 (water level message - Bosch) or P226997 (water level message - Delphi) or 171600 (filter load - Bosch) is stored in the engine control unit.
- 10167547Shift quality complaints and/or automatic transmission in limp-home mode in combination with one or more of the following fault codes: P060600, P072200, P072300, P072364, P072900, P073000, P073100, P073200, P073300, P073400, P073500, P076F00.
- 10167498ESP warning message in instrument cluster. One of the fault codes C219700 or 630900 is logged in the ESP control unit (N30/4).
- 10167085Passenger side wiper arm strikes vent grille of water collector
- 10167040This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has determined that the mbrace software does not correspond to current production configuration. An authorized Mercedes-Benz dealer will update the mbrace control module software at the next workshop visit.
- 10167019Blind Spot Assist inoperative.
- 10166977Engine diagnosis warning lamp lights up. The fault code (FC) P0101FA or P0101Fb or P0101FC is logged in the engine control unit.
- 10166976Message in instrument cluster "DISTRONIC PLUSCurrently Unavailable - See Owner's Manual"
- 10166975This Customer 1 Action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the Verizon Telematics systems. If the i-button call failed or if the customer was unable to perform the i-button call, the mbrace agent instructed the customer to make an appointment with their dealer to have the issue corrected and/or i-button call performed. The vehicles impacted range from model year 2002 to 2014.
- 10135867Engine noises after engine start
- 10135598Engine diagnosis warning lamp lights up in instrument cluster, fault code U145400: "Implausible data were received from the ethanol sensor"
- 10056472Xentry (mercedes): after engine has started, several issues occurs, an acoustic warning sounds IS heard, the instrument cluster displays warning message power steering malfunction, service required. Steering system IS sluggish. Model 117, 156, 176, 242, 246.
- 10056233Xentry (mercedes): in the instrument cluster, an esp warning due to implausible accelerator pedal signal received from engine control unit. Model 2012 172, 212, 218, 207, 204.
- 10055333Xentry (mercedes): the fuse and relay boxes (srb) in engine compartment or rear compartment has a malfunction and disruptions to communication paths causing a no start in vehicle. Model 2012-2013 204, 207, 212, 218, 231, 246, 176, 117, 172.
- 10053758Mercedes: the information, on some vehicles, regarding spare tire size on the b-pillar tire pressure label, IS incorrect and needs to be checked and if necessary, replaced. Model 204 (c and glk 250, 350,300, 63).
- 10051974Mercedes: due to production issue, the seam seal will be applied to both the right and left rocker panels, that were missing. Models 2012 204 (glk350).
- 10050900Mercedes (xentry): when engine switches to unit protection function (limp-home mode), set too conservatively, causes vehicle to have reduced or no power, intermittently, and software needs to be updated. Model 204. No model years listed.
Every Mercedes-Benz GLK350 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.