2018 Mercedes-Benz S560
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mercedes-Benz › S560 › 2018
These records cover every 2018 Mercedes-Benz S560. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
10 recalls name the 2018 Mercedes-Benz S560. Newest first.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2017-2020 C300 Coupe, C43 Coupe AMG, C43 AMG, 2015-2020 C300, GLA250, 2016-2018 C350e, CLA45 Coupe AMG, 2015 C400, S65 AMG, 2015-2019 C63 AMG, 2016 C450, 2015-2016 GLA45 AMG, S600, 2016-2020 GLC300, 2017-2019 GLC43 AMG, GLE43 Coupe AMG, 2014-2019 CLA250 Coupe, 2014-2015 CLA45 AMG, 2018 GLC63 AMG, 2014-2017…
Risk and remedy
Risk
The adhesive bonding of the front panel might deteriorate, possibly causing the front panel to detach from the vehicle and become a road hazard, increasing the risk of a crash.
Remedy
Mercedes-Benz dealer will remove the bonded panel and will install a new front panel by following the detailed repair instructions and using the approved primer, cleaner and adhesive, free of charge. Owner notification letters were mailed on September 3, 2021 and October 26, 2021. Owners may contact MBUSA customer service at 1-800-367-6372.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2017-2019 C300, E300, 2018-2020 CLA250, 2020 CLS450, AMG E53, AMG GT53, GLE450, 2018 AMG E63, AMG GTA, 2017-2020 GLA250, GLC300, 2019 GLC350, AMG GLC43, 2017-2018 GLE350, 2019 AMG GLC 43, GLC350, GLE400, 2017 GLS450, S550, C300 Cabrio, and 2018-2019 S560 vehicles. On June 18, 2021, an additional 9…
Risk and remedy
Risk
A disabled eCall system would prevent a vehicle occupant from contacting emergency services through the call center in an emergency, potentially delaying emergency responders and increasing the risk of injury.
Remedy
MBUSA will notify owners, and dealers will inspect the communication module and activate it, if necessary, free of charge. The recall began March 31, 2021. Letters for the owners of the 9 additional vehicles were mailed July 9, 2021. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2021030005.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2016 - 2021 CLA-Class, GLA-Class, GLE-Class, GLS-Class, SLC-Class, A-Class, GT-Class, C-Class, E-Class, S-Class, CLS-Class, SL-Class, B-Class, GLB-Class, GLC-Class, and G-Class vehicles. Please refer to the Part 573 report for specific vehicle model details. The software design of the communication…
Risk and remedy
Risk
Failure of the eCall system may result in emergency responders being dispatched to the wrong location, increasing the risk of injury following a crash.
Remedy
MBUSA will notify owners, and the communication module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. The recall began March 12, 2021. Owners may contact MBUSA customer service at 1-877-762-8267. MBUSA's number for this recall is 2021020025.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2019 C300, C300 Coupe, CLS450, E450 Coupe and S450, 2017-2019 E300, 2018 E400 Coupe, E400 Stationwagon, and 2018-2019 S560 vehicles that have previously had the instrument cluster replaced. The software in the replaced instrument cluster may cause the seat belt warning system to not operate properly…
Risk and remedy
Risk
Without the audible tone and blinking warning light to remind the front seat occupants that their seat belts are not buckled, they may forget to buckle their seat belt, increasing their risk of injury in the event of a crash.
Remedy
MBUSA will notify owners, and dealers will update the instrument cluster software, free of charge. The recall began September 8, 2020. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2020080015.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2018-2019 S560 and Maybach S560 vehicles equipped with 4.0L 8-cylinder gasoline-engines. Two engine oil plugs may not withstand high engine loads while driving, possibly resulting in an engine oil leak.
Risk and remedy
Risk
An engine oil leak can spill on to the road and cause slippery road conditions. Additionally, if the engine runs out of oil it can cause an engine stall while driving. Either of these scenarios can increase the risk of a crash.
Remedy
MBUSA will notify owners, and dealers will reinforce the engine oil plugs by adding a retaining plate, free of charge. The recall began August 11, 2020. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2020060018.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2018 S560 and S450 vehicles. These vehicles may be equipped with front brake components (brake discs, calipers, and pads) with different dimensions than specified for the vehicle.
Risk and remedy
Risk
The incorrect size brake components may lead to the wrong replacement components fitted to the vehicle during brake repairs, possibly affecting braking performance and increasing the risk of a crash.
Remedy
MBUSA will notify owners, and dealers will replace the front brake system, free of charge. The recall began May 8, 2020. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2020030020.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2018-2019 S560, S560 Cabriolet, and S560 4MATIC vehicles equipped with 8-cylinder gasoline engines. The threaded connection between the camshaft idler gear and the crankcase may be improperly tightened, possibly causing the idler gear to detach from the crankcase.
Risk and remedy
Risk
A detached idler gear can damage the engine, resulting in a stall and increasing the risk of a crash.
Remedy
MBUSA will notify owners, and dealers will replace the engine, free of charge. The recall began February 21, 2020. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2020020013.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2018 AMG S63 4MATIC coupe, AMG S63 4MATIC sedan, AMG S63 4MATIC Cabriolet, S450 4MATIC sedan, S560 4MATIC coupe, S560 4MATIC sedan, and Maybach S560 4MATIC vehicles. Due to an incorrect steering boot installation, the Active Steering Assist system may remain engaged despite the driver's hands not being…
Risk and remedy
Risk
If the system remains active despite the driver not having their hands on the wheel, the driver's inattention may increase the risk of crash.
Remedy
MBUSA has notified owners, and dealers will inspect the vehicles and correct the steering boot installation, as necessary, free of charge. The recall began May 13, 2019. Owners may contact Mercedes Benz customer service at 1-800-367-6372. MBUSA's number for this recall is 2019040025.
Mercedes-Benz USA, LLC. (Mercedes) is recalling certain 2018 S450 4MATIC, S560 4MATIC Coupe, S63 AMG 4MATIC Coupe, Maybach S560 4MATIC, S560 4MATIC, S63 AMG and S63 AMG 4MATIC Cabrio vehicles. The Hands-off-Detection system may malfunction, causing the Active Steering Assist system to remain engaged despite the driver's hands not being on the steering…
Risk and remedy
Risk
If the system remains active despite the driver not having their hands on the wheel, the driver's inattention may increase the risk of crash.
Remedy
Mercedes has notified owners, and dealers will update the software of the steering control unit, free of charge. The recall began May 13, 2019. Owners may contact Mercedes customer service at 1-800-367-6372. MBUSA's number for this recall is 2019040024.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2018 Mercedes-Maybach S560 and S560 4Matic and Mercedes S450 4Matic, S450, S560, S560 4Matic, and S560 Coupe 4Matic vehicles. The electrical power bars inside the pre-fuse box in the trunk may not have been secured properly.
Risk and remedy
Risk
If the power bars are not properly secured, it can cause higher electrical resistance increasing the risk of a fire. Additionally, an intermittent contact between the power bars could lead to a loss of vehicle functions. The engine operation, the seat belt functions and the instrument cluster could be impaired, increasing the risk of a crash and injuries.
Remedy
MBUSA will notify owners, and dealers will inspect the pre-fuse box, replacing it as necessary, free of charge. The recall began August 30, 2018. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2018080001.
Owner complaints
13 complaints1 involved a fire
What owners report most
Latest complaints
- Fuel/propulsion system · Suspension
The Smell of fuel is present inside the vehicle around 50 percent of the time. When parked in the garage the vehicle emits an extremely strong fuel smell as if it has leaked fuel with no visible spills or leaks. While driving the smell of fuel is present almost always.
- Engine
Walk Home Condition -I purchased a 2018 CPO Mercedes-Benz S560 on 8/20/21 from Knauz Continental Autos in Lake Bluff, IL. On 9/25/2, at approx noon, I was driving the vehicle and the engine light came on, the throttle/engine felt sluggish and not responsive. The engine felt very out of balance…
Walk Home Condition -I purchased a 2018 CPO Mercedes-Benz S560 on 8/20/21 from Knauz Continental Autos in Lake Bluff, IL. On 9/25/2, at approx noon, I was driving the vehicle and the engine light came on, the throttle/engine felt sluggish and not responsive. The engine felt very out of balance shaking the entire care when the gas pedal was pressed. 5 mins later in heavy traffic, I stopped at a light, the engine started violently shaking and stalled. I shut the car off and tried to start it over a 5 min period. I was able to limp the vehicle to a local Mercedes dealership (Bloomfield, MI). Could only operate the vehicle below 25 MPH without violently shaking. The dealership was only 1 mile away. That dealership was able to quickly check codes. When I arrived the engine light went out and no codes where set. The assistant Service Manager told me that it looked like cylinder 4 was misfiring, but no code set. He told me that if it happens again, shut the car off and it should reset. I left the dealership around 1pm and continued driving. The issue had stopped. Approx 5 hours later, after driving for 3 hours, the same issue happened again about 5 miles from my home. The vehicle stalled multiple times and I finally got it running and limped the vehicle home at 20-25 MPH. The engine fault light stayed on this time. I let the vehicle sit in my garage on 9/26/21 as I was afraid to drive it anywhere. On 9/27/21 I drove the vehicle to the dealership close to my house. (Rochester Hills, MI) When I submitted the vehicle I was told that because I didn't have an appointment, they weren't sure if they could look at it that day. Service Rep called and said that the vehicle set a code (P030485). They said it would probably go away so I picked it up. Same issue occurred on 9/29/21 after driving for 25 mins. Had to limp the vehicle home again at 20 MPH. I turned the vehicle back into the same dealer on 9/30/21. I have zero visibility on a fix and next steps.
- Communication · Electrical system
The contact owns a 2018 Mercedes-Benz S560. The contact received notification of NHTSA Campaign Number: 21V058000 (Communication, Electrical System) however, the part to do the recall repair was unavailable. The contact took the vehicle to the local dealer and it was confirmed that the part was not…
The contact owns a 2018 Mercedes-Benz S560. The contact received notification of NHTSA Campaign Number: 21V058000 (Communication, Electrical System) however, the part to do the recall repair was unavailable. The contact took the vehicle to the local dealer and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Unknown or other
Recall # 21V058 The above Safety recall has not been cleared via dealer. (Two visits). I mentioned to dealer and they claim that it gets resolved "over the air". If so, then why hasn't it been resolved.
- Service brakes
The front rotors seem to retain brake dust just on the insides of the rotors. the outsides are very clean and shiny but on the other side of the rotor (interior) becomes very coarse causing vibrations in steering. Keep in mind that the interior IS protected by the brake shield which must be…
The front rotors seem to retain brake dust just on the insides of the rotors. the outsides are very clean and shiny but on the other side of the rotor (interior) becomes very coarse causing vibrations in steering. Keep in mind that the interior IS protected by the brake shield which must be causing heat not to be dissipated thereby fostering brake dust to amass. such vibrations will alarm drivers to panic and cause accidents.
- Fuel/propulsion system
When the car IS lifted in the front (to change both tires) there IS a strong odor of fuel coming from the rear of the car when walking around the back. the tank was 50%full and this occurs whenever the car IS lifted in the front.
- Wheels
On the morning of march 8TH, my vehicle was sitting in my driveway and I started it. I received a low tire pressure warning from the front left tire. I added air for several days and then on march 13TH took the vehicle to a local americas tires for repair. the shop told me the tire was fine, the…
On the morning of march 8TH, my vehicle was sitting in my driveway and I started it. I received a low tire pressure warning from the front left tire. I added air for several days and then on march 13TH took the vehicle to a local americas tires for repair. the shop told me the tire was fine, the rim had developed a hairline crack. I took the vehicle to mercedes benz and without even looking at the rim, they said this was not a defect, but that I must have damaged the rim and although the vehicle IS under warranty, they would not repair it. I can find many cases of this on line, and the shop told me "this IS common with mercedes".
- Service brakes
Brakes failed with no prior warning while driving at rated speed limit of 55 mph and trying to slow down the car to make a right turn. No brake response and barely missed wrapping the car to the power line located on route 62 and bateman road in barrington il 60010
- Engine
2018 mercedes benz s class. Consumer writes in regards to rework engine oil plugs safety recall. *Ld the consumer stated the manufacturer exceeded a reasonable amount of time completing the recall repair. *Js the consumer stated the vehicle was repaired. *Js
- Engine
TL* the consumer owned a 2018 mercedes-benz S560. After driving the vehicle for approximately three minutes, the contact parked the vehicle. The consumer was alerted by someone that there was smoke under the hood of the vehicle. Within thirty seconds to a minute, the vehicle became engulfed in…
TL* the consumer owned a 2018 mercedes-benz S560. After driving the vehicle for approximately three minutes, the contact parked the vehicle. The consumer was alerted by someone that there was smoke under the hood of the vehicle. Within thirty seconds to a minute, the vehicle became engulfed in flames. The fire department was notified and extinguished the fire. The engine compartment and vehicle were destroyed. Police and fire reports were filed. There were no injuries. The vehicle was towed to mercedes-benz of caldwell (1220 bloomfield ave, west caldwell, nj 07006, (973) 227-3600) to be inspected. The vehicle was not diagnosed or repaired. The manufacturer was informed of the failure. The approximate failure mileage was 39,000. *ln*jb *as
- Visibility/wiper
TL* the contact drove a 2018 mercedes-benz S560 company vehicle. On several occasions, while driving, a small rock struck and cracked the windshield. The crack quickly spread across the entire windshield. The contact stated that the failure occurred four times and the windshield was replaced each…
TL* the contact drove a 2018 mercedes-benz S560 company vehicle. On several occasions, while driving, a small rock struck and cracked the windshield. The crack quickly spread across the entire windshield. The contact stated that the failure occurred four times and the windshield was replaced each time at john sisson motors mercedes-benz (480 washington rd, washington, pa 15301, (724) 367-4013). The dealer stated that the vin was not included in a recall. The vehicle was repaired. The manufacturer was notified of the failure and provided case number: 190703000028. The approximate failure mileage was 21,436.
- Steering
2018 mercedes benz s class. Consumer writes in regards to nhtsa recall 18v-910. *Ld *js
- Steering
There are 2 active recalls since past 4 months and there IS no remedy yet. I have contacted the dealer to fix the issue and they are telling me that the remedy has not been made yet.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Front Roof Panel Detachment
On January 8, 2021, after ongoing review with Mercedes Benz, the National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation (ODI) opened PE21-001 to assess allegations of front roof panel detachments while driving at highway speeds in certain 2015 Mercedes-Benz (Mercedes) C-Class…
On January 8, 2021, after ongoing review with Mercedes Benz, the National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation (ODI) opened PE21-001 to assess allegations of front roof panel detachments while driving at highway speeds in certain 2015 Mercedes-Benz (Mercedes) C-Class vehicles.The subject front roof panel is a stationary panel composed of polycarbonate and is attached to the vehicle via adhesive at the time of manufacture. The panel is found on subject vehicles equipped with panoramic sunroofs. Over time, the subject panels may exhibit cosmetic degradation leading to replacement of the panel, a procedure which entails: removal of the old panel and adhesive, site preparation, and installation of a replacement panel with new adhesive.The consumer complaints that prompted the opening of PE21-001 all described detachments of front roof panels that had been replaced after the vehicle was put into service.Mercedes' internal investigation identified a broader scope of affected vehicles (2014-2020 CLA, GLA, C, S, GLC, and GLE class) and found the following potential service procedure- related causes of front roof panel detachments:- Improper surface pretreatments such as the use of the wrong primer or cleaner or scoring of the surface; or - Use of the incorrect adhesive.These conditions lead to a front roof panel bond that, even if sound at the time of repair, cannot maintain its strength over time and environmental exposure.Mercedes updated its service and parts ordering systems to reinforce the proper use of specified kits and procedures via webinars, shop foreman meetings, and explicit reference to the risks incurred by diverging from the repair procedures. Mercedes is also furnishing parts ordering assistance, and will hold dealerships accountable for improper repairs.ODI's analysis of the ten complaints it has received from the public (VOQ's) and MBUSA's complaint data submitted in response to the information request letter for PE21-001 identified a total of 57 non-duplicative reports alleging incidents in which the front roof panel detached from the vehicle while in motion. Included within the 57 reports are incidents where consumers state the panel detached ...and flew off into traffic.On March 19, 2021, Mercedes notified NHTSA that it would recall subject vehicles with front roof panels known to have been replaced after the original sale of the vehicle. In total, the recall (designated as Recall 21V197) covers 15,099 vehicles that were ever registered in the United States. Based on Recall 21V197 and the remedy implemented by Mercedes, further investigation does not appear to be warranted at this time.Accordingly, this investigation is closed.The ODI complaints cited above can be viewed at www.nhtsa.gov under the following ODI identification numbers: 11376425, 11352686, 11351629, 11349158, 11341541, 11337594, 11324100, 11311591, 11222127, 11404183
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10219247Mercedes-Benz AG ("MBAG"), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (MY) 2028-2021 S-Class, S-Class Coupe/Cabriolet (217 and 222 platforms) vehicles, the low pressure fuel line does not correspond to the current series production configuration. Therefore, it is possible that accelerated aging in the area of connection could occur, resulting in a leak. A risk of fire can be ruled out. What Were Doing MBUSA will conduct an Emission Service Campaign. An authorized Mercedes-Benz dealer will replace the braided hose of low-pressure fuel line and install a heat shield over the new braided hose
- 10213055Complaint Creaking noise from side bolster when load applied to seat cushion of front seats. Cause Soiling to the replacement fabric of the seat cushion cover means that friction on the seat side finisher mountings generates a creaking noise. Remedy 1. Clean fabric cover and seat side finisher in marked area (Pic. 1) 2. Apply lubricant A 000 989 35 60 in area of inner plastic cover (reinforcement for cover at inner side of front seat - do not apply directly onto outer cover).
- 10209877Complaint The result from the XENTRY battery test does not match the current state of the battery. Cause The XENTRY battery tester uses the stored on-board electrical system data in the SAM module to access the health of the 12 volt battery. The XENTRY battery test may not take into account a single discharge event because the SAM cannot record the data if the battery is discharged. Note: A discharged battery does not necessarily need to be replaced. A discharged battery may be recovered with no permanent damage. Remedy Follow guided tests as described.
- 10207199Complaint The range of the integrated garage door opener (GTO) is too short. Cause 1. Vehicles equipped with infrared windows and/or a heated windshield may suffer from complaints involving low transmission power. 2. When comparing the range between the integrated GTO and the garage door hand transmitter, the garage door hand transmitter is tested outside the vehicle. 3. The garage door hand transmitter is being aimed towards the garage door, but the vehicle is in a different position. 4. The garage door drive is old. Remedy 1. The lower level of transmission power is mainly perceived by customers who did not have any infrared windows (code 595) or all-round infrared windows (code 596) or heated windshield (code 597) in their previous model or who have another model without this special equipment in their fleet. The loss in transmission has technical reasons, i.e. a thin metal film is fitted in the windows. Please consider these codes and advise the customer accordingly! Replacing parts does not remedy the problem. 2. Perform the comparison test between the integrated GDO and the garage door hand transmitter under identical conditions. The garage door hand transmitter must be inside the vehicle and must be held at the height of the inside rearview mirror. 3. The customer instinctively aims the garage door hand transmitter towards the door. However, the transmission direction of the integrated GDO depends on the position of the inside rearview mirror, and thus depends directly on the position of the vehicle relative to the receiving antenna of the garage door drive.
- 10207198Complaint The garage door hand transmitter cannot be initialized with the integrated garage door opener in the inside rearview mirror. Cause 1. The integrated garage door opener (GDO) is not compatible with the opening system installed in the garage. 2. The garage door drive uses a rolling code system. In contrast to the fixed code system, the LED in the mirror in this case flashes green after programming. 3. When the handheld remote control is initialized with the integrated GDO, the distance between the handheld remote control and the GDO is too long or too short. 4. The maximum programming time of the hand transmitter was exceeded. The hand transmitter switches itself off after 10s to 20s. However, the garage door opener needs up to 30s to learn the code. 5. The maximum programming time of the integrated GDO was exceeded. The integrated GDO has aborted programming unsuccessfully. 6. The GDO cannot be programmed after replacement (See #9). 7. The batteries of the hand transmitter are too weak. 8. A part of the signal was not registered correctly. 9. The GDO is not programmed to US standards. 10. Errors with Chamberlin MyQ, Liftmaster MyQ, or Craftsman AssureLink systems causing loss of synchronization. Remedy Note: The numbering of the remedies refers to the numbering of the causes. 1. Installation of a universal receiver. Order via the Homelink Hotline. 2. In the case of garage door drives with rolling code system, synchronization of the garage door drive must also be performed. 3. Keep the correct distance when initializing! This can vary between 5 and 20 cm depending on the system. If the initialization attempt is unsuccessful, repeat the initialization process, changing the distance between the hand transmitter and the mirror.
- 10206077"MY15+ M278 and M157 Equipped Vehicles with Fault Code ""P023400 Boost Pressure is Too High"" "
- 10205814Fuel filler flap opens slowly/switch flashes/tank is bleeding instrument cluster warning
- 10205803The mobile phone address book may not be transferred completely to the multimedia system COMAND, Audio 20, or MBUX. The contact list may not be fully populated and in some instances, the call list will display telephone numbers but no names.
- 10205266Map pocket on front seat backrest trim does not close.
- 10205263Trunk lid closes too quickly.
- 10205252High voltage battery warning message in instrument cluster.
- 10205242Navigation system permanently displays "Activating".
- 10205241Navigation system permanently displays "Activating".
- 10205233Mobile phone cotacts are not transferred completely.
- 10205154Gasket may settle causing a slight oil leak.
- 10202531Touch pad: Search lighting does not dim or does not turn on.
- 10186141NTG5.5: Incorrect time shown on instrument cluster, COMAND display, and analog clock
- 10179966Incorrect time and/or instrument cluster message "SOS, service not activated" and/or Mercedes Me connect services nonfunctional
- 10179956Xentry Battery Tester results disagree with workshop assessment
- 10179950Harsh engagement when changing gear range from P to D or R
- 10179949Shifting complaints and transmission fault codes in vehicles with transmission 725.0
- 10178714Headlamps fogged
- 101766615 to 4 coasting downshift - shift quality concern with cold trans- mission oil on MODEL 217 or 222 in combination with ENGI- NE 278 and TRANSMISSION 722.9 without code 835/498
- 10172683Information Label on Tire Sealant
- 10171658Update Engine Control Unit Software
- 10171657Update engine electronics (ME-SFI) control unit software
- 10167558Customer experiences low battery conditions, resulting in jump starts, and eventually requiring battery replacement.
- 10167550Single, throttle lift-off, clunking noise from the side shaft when starting off (audible at the wheel). The clunk is heard once when changing from forward to reverse (and vice versa).
- 10167546FC 2783 (Friction power of torque converter lockup clutch is too high) or FC 0741 (Actuation of torque converter lockup clutch not possible) stored in transmission control unit. One possible additional customer complaint could be "poor acceleration" e.g. due to engine intervention. This can affect all NAT2FE+ (7G-TRONIC PLUS) vehicles with engines OM651, OM642LS and M278 in the production period from 04/2011 to 02/2012 and with more than 10,000 km. The two fault codes can also occur in combination with rpm sensor faults (see also GI27.50-P-035556). The rpm sensor fault is not connected with this complaint.
- 10167528The outside mirror jolts when retracting/extending and makes a grinding noise.
- 10167524Sound system: Intermittent loss of sound after engine start
- 10167523Rear door quarter window roller blind fails to extend.
- 10167522Gap between cap and outside door handle is wedge shaped on driver door
- 10167520Wind noises at the front door above 70 MPH.
- 10167503Squeaking noises from the service brake when braking. The complaint occurs primarily at low speeds when the operating temperature of the brakes is low.
- 10167500Thumping/rattling/clattering noises from area of rear axle. Primarily, and sometimes only, heard by rear-seat passengers.
- 10167499The vehicle drops at the front axle on one or both sides by more than 2 cm overnight.
- 10167490Engine diagnosis warning lamp (check engine light - CEL) lights up in instrument cluster. Fault codes relating to combustion misfiring are logged in the fault memory of the engine control unit. In rare cases the engine may be in a limp-home mode. Otherwise there are no other engine performance issues.
- 10167487Minor leaks at the oil duct of the left or right cylinder head of engines 157, 276 and 278. 1. Left cylinder head: Oil passage plug hole on left beside mechanical vacuum pump. 2. Right cylinder head: Oil passage plug hole below high-pressure pump housing.
- 10167011The side markers light up continuously.
Every Mercedes-Benz S560 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.