2011 MINI Cooper S Clubman
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › MINI › Cooper S Clubman › 2011
These records cover every 2011 MINI Cooper S Clubman. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2011 MINI Cooper S Clubman. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2011-2012 BMW 550i, 550i xDrive, 550i Gran Turismo, 550i Gran Turismo xDrive, 750i, 750Li, 750i xDrive, 750Li xDrive, 760Li, X5 xDrive50i, X5 M, X6 xDrive50i, X6 M, ActiveHybrid7, MINI Cooper S Convertible, John Cooper Works (JCW) Convertible, Cooper S Countryman, Cooper S Countryman ALL4, Cooper S, JCW…
Risk and remedy
Risk
If the circuit board were to overheat, it can increase the risk of a fire.
Remedy
BMW will notify owners, and dealers will replace the electric auxiliary water pump, free of charge. Depending on the model, there are currently limited parts available, however not all parts are available at this time. Owners will be notified of the recall beginning June 11, 2018, and will receive a second notification when remedy parts become available. Owners may contact BMW customer service at BMW 1-800-525-7417, MINI at 1-866-825-1525, or Rolls-Royce at 1-877-877-3735. Note: BMW recommends that owners park their vehicle outdoors until the recall remedy has been performed.
BMW IS recalling certain model year 2007-2011 MINI cooper s, 2008-2011 MINI cooper s clubman, 2009-2011 MINI cooper s convertible, 2009-2011 MINI cooper jcw, 2009-2011 MINI cooper jcw clubman, 2009-2011 cooper jcw convertible, and 2011 cooper s countryman passenger cars manufactured from november 14, 2006, through january 18, 2011. the electric auxiliary…
Risk and remedy
Risk
The circuit board may smolder which could result in a vehicle fire.
Remedy
BMW will notify owners, and dealers will replace the water pump free of charge. the safety recall beganduring february 2012. owners may contact BMW at 1-866-275-6464.
BMW Is recalling certain model year 2011 Mini Cooper Clubman and Cooper S Clubman vehicles manufactured from February 8, 2011, through May 11, 2011, for failing to comply with the requirements of Federal Motor Vehicles Safety Standard No. 101, "Controls and Displays." These vehicles are equipped with a European specification tachometer that uses…
Risk and remedy
Risk
In the event of an ABS system problem, only the the outer circle of the symbol illuminates, not the ABS letters. As such, the driver may be unaware that there is a problem with the ABS, increasing the risk of a crash.
Remedy
All affected vehicles have been repaired at dealerships. Therefore, an owner notification letter will not be issued for this campaign. Owners may contact BMW at 1-800-525-7417.
Owner complaints
13 complaints2 involved a crash2 involved a fire1 injuries
What owners report most
Latest complaints
- Electrical system
The contact owns a 2011 Mini Cooper S Clubman. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System). The contact stated that after washing the vehicle, the battery became drained. The battery was recharged; however, the interior lights and power windows became…
The contact owns a 2011 Mini Cooper S Clubman. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System). The contact stated that after washing the vehicle, the battery became drained. The battery was recharged; however, the interior lights and power windows became inoperable. The contact stated that the front headlights and taillights became stuck in the "ON" position. The contact stated the check engine warning light was occasionally illuminated. The contact disconnected the battery to prevent the failures. The manufacturer was notified of the failure, but the contact received conflicting information each time. The vehicle was taken to the dealer several multiple occasions; however, the dealer stated that the contact needed to pay for a diagnostic fee before the recall repair could be performed. The dealer stated that the power window failure was not associated with the recall. The failure mileage was 152,000.
- Electrical system · Engine · Fuel/propulsion system
When I bought the car, John, a sales representative, promised me that he would have the car inspected by a mechanic before finalizing the paperwork, addressing issues with the tire pressure monitor, tail light sensor, and license plate light. However, the mechanic couldn't fix these issues, and…
When I bought the car, John, a sales representative, promised me that he would have the car inspected by a mechanic before finalizing the paperwork, addressing issues with the tire pressure monitor, tail light sensor, and license plate light. However, the mechanic couldn't fix these issues, and Mike, the owner, directed me to his “personal mechanic” in San Bruno. After multiple reschedules from Mike, the car began to display an engine malfunction error. I informed Mike, and he advised me to mention the issue to the mechanic when I brought the car in. When I finally took the car to his mechanic, I was told that there were no errors, but the error lights needed to be reset at a different shop, as the mechanic didn’t have the required equipment. Despite this, the engine malfunction light remained on, and the car started to shake noticeably while driving. A few weeks later, while driving, the car began emitting white smoke from the hood. I texted Mike, asking why the issues weren’t fixed, and I had to tow the car to my house. He did not respond, so I called him days later. He told me to call back after New Year's to have the car fixed, even offering to tow it to his mechanic. After New Year's, I followed up, but Mike forgot about the original arrangement and told me to call back in a week. I reminded him of our previous conversation, and he said he would check with his mechanic and call me back. He never did and ignored my follow-up text. On 01/21/2025, I had a mobile mechanic inspect the car, as it had not been operable since December 2024. The mechanic confirmed that the car had never been tuned, the spark plugs weren’t replaced, and it was not roadworthy at the time of sale. On 01/22/2025, I shared my experience in reviews on Yelp and Google. Later that night, Mike called me, but I returned his call on 01/23/2025. He said that if I removed my reviews, dropped my complaints with the DMV, BAR, and Attorney General, he would fix the car at his expense.
- Electrical system
Mini/bmw issued recall information may of 2023 for the frm electronic control unit, as of 12/30/2024 they are still unable to repair the vehicle, toyota website says they are still working on a resolution. Dealers offer no solution to problem. It has been a year since recall was issued. Nhtsa recall number - 23v337
- Electrical system
The contact owns a 2011 Mini Cooper S Clubman. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a…
The contact owns a 2011 Mini Cooper S Clubman. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Electrical system
The contact owns a 2011 Mini Cooper S Clubman. The contact stated that water was entering the motherboard and fuse box. While driving at an undisclosed speed, the vehicle stalled. The check engine warning light was illuminated. The vehicle failed to restart. The local dealer was not contacted. The…
The contact owns a 2011 Mini Cooper S Clubman. The contact stated that water was entering the motherboard and fuse box. While driving at an undisclosed speed, the vehicle stalled. The check engine warning light was illuminated. The vehicle failed to restart. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The contact stated that the failure was related to NHTSA Campaign Number: 23V337000 (Electrical System). The manufacturer was contacted. The failure mileage was approximately 50,000.
- Air bags · Electrical system · Seats
The passengers seat occupancy detector IS not functioning and it won't allow any airbag to activate. The passenger airbag light IS constantly on and it IS a safety hazard. This IS a common problem with these cars, and no recall has been issued.
- Steering · Unknown or other · Wheels
I was trying to make a right turn going on a 35mph street and my car did not turn right when I tried to go into a street and it went straight into a tree and my car was almost or may be totaled because of this. I believe the steering wheel was faulty. I could have hit a concrete wall but the tree I…
I was trying to make a right turn going on a 35mph street and my car did not turn right when I tried to go into a street and it went straight into a tree and my car was almost or may be totaled because of this. I believe the steering wheel was faulty. I could have hit a concrete wall but the tree I ran into saved my life. I am not sure if there has been other reports for this lately but I want to be safe and if the steering wheel did not function right then I believe there should be a recall for this.
- Engine
Only had this vehicle for 6 months. On the way to the MINI of san diego dealership to get an oil change, the car shuts down as I stopped at a red light. I was still in motion and on the street. I was coming off the highway. I tried restarting the car. I was in the middle of the street. There were…
Only had this vehicle for 6 months. On the way to the MINI of san diego dealership to get an oil change, the car shuts down as I stopped at a red light. I was still in motion and on the street. I was coming off the highway. I tried restarting the car. I was in the middle of the street. There were overheating lights and smoke a couple of days before so discontinued driving the vehicle until my appointment with MINI of san diego. The day of the appointment, there was no indication light of overheating. The dealership was only 15 mins away from my home. I also found that the model of my vehicle was recalled for the same reasons that my car IS currently in the shop for currently. MINI of san diego IS telling me there's no recall on my car based off the vin number. But based off the years and model, my car fits into the recall.
- Engine · Vehicle speed control
4 faulty ignition coils within 3 months: cylinders #1 & # 2 had to be replaced on 4/7/17 cylinders #3 & #4 on 7/4/17. First incident occurred when I was pulling into oncoming traffic and resulted in complete loss of engine power. The second incident happened on the highway while changing lanes…
4 faulty ignition coils within 3 months: cylinders #1 & # 2 had to be replaced on 4/7/17 cylinders #3 & #4 on 7/4/17. First incident occurred when I was pulling into oncoming traffic and resulted in complete loss of engine power. The second incident happened on the highway while changing lanes, again complete loss of engine power and nearly caused me to be hit by a semi-truck. I narrowly escaped an accident in first incident as well. I do not feel safe driving my children in this car any longer. Each time the parts and labor cost more than $300, not to mention the aggravation of being without a car for work and family transportation for several days. This IS not what I expected from a quality automobile made by BMW. Documentation/invoices can be provided upon request.
- Air bags · Seats
My MINI cooper was rear ended, and I was pushed into another vehicle violently. Not a single airbag deployed, my seat fully reclined during the impact, and my head rest broke out of its base. Due to the severity of the impact, airbags should have deployed.
- Air bags · Electrical system · Electronic stability control (esc)
I've had my 2011 MINI clubman s for three years now and had spent thousands of dollars already. I've replaced the water pump, dsc lights, and other things. The indicator lights seem to come on all the time and the mechanics don't always have the idea on what's causing these problems.
- Electrical system · Engine
My vehicle was parked in my garage for approximately one hour, after driving it for three miles in the rain. the engine spontaneously caught on fire. *tr
- Structure › Body › Hood › Hinge and attachments
I parked my MINI clubman s and went inside a fast food restaurant for only 10 minutes, when I returned to my MINI, I was shocked to see smoke coming from under the hood. I released the hood latch and tried without success to open the hood. A nearby witness called out to me as he ran to assist with…
I parked my MINI clubman s and went inside a fast food restaurant for only 10 minutes, when I returned to my MINI, I was shocked to see smoke coming from under the hood. I released the hood latch and tried without success to open the hood. A nearby witness called out to me as he ran to assist with an extinguisher realizing my car was on fire. I immediately called 911 and stood helplessly watching as my 4-month old car was engulfed in flames within minutes. there were no previous warnings displayed...if my dog, who travels with me quite often had been in the car as I went inside, I cannot imagine how I would be feeling right now...losing the car was difficult, and now, I realize how fortunate I was not to lose more, considering the fact I parked the MINI in my garage every night as I returned home from work. the fire IS currently under investigation, so I cannot name the failed components as requested above, but I will update this information once the investigation IS complete. *Tr
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Engine compartment fire
In a January 10, 2012 letter to NHTSA, BMW of North America, LLC. (BMW) submitted a Defect Information Report (DIR) identifying a defect in the electric auxiliary water pump in approximately 88,911 model year (MY) 2007-2011 Mini Cooper vehicles manufactured from November 14, 2006 through January 18, 2011 (Recall…
In a January 10, 2012 letter to NHTSA, BMW of North America, LLC. (BMW) submitted a Defect Information Report (DIR) identifying a defect in the electric auxiliary water pump in approximately 88,911 model year (MY) 2007-2011 Mini Cooper vehicles manufactured from November 14, 2006 through January 18, 2011 (Recall 12V-008).According to BMW, the auxiliary water pump on vehicles equipped with 4-cylinder turbocharged engines may overheat.Electro-migration can cause the pump electronic circuit board to overheat resulting in smoldering of the water pump. If smoldering occurs, it may lead to an engine compartment or vehicle fire.The pump supplier, Pierburg Pump Technology GmbH, redesigned the pump to address factors that may contribute to circuit board overheating.The redesigned pumps were completely implemented in production vehicles by January 2011.Recall 12V-008 was the third recall initiated by BMW to address electric auxiliary water pump fires in vehicles equipped with Pierburg pumps.In two October 20, 2011 letters to NHTSA, BMW submitted DIRs for similar auxiliary water pump defect conditions in approximately 32,084 MY 2008-2011 BMW 5-Series, 7-Series, X5 and X6 models equipped with 8- and 12-cylinder engines and manufactured from May 2008 through December 2010 (Recall 11V-521); and for approximately 589 MY 2010 Rolls-Royce Ghost vehicles manufactured from September 2009 through September 2010 (Recall 11V-522).In three separate April 5, 2012 letters to NHTSA, BMW submitted amendments to Recalls 11V-521, 11V-522 and 12V-008.The amendments all described a common defect condition related to a manufacturing process deviation in a certain production range of the redesigned Pierburg water pumps that could result in cracks in the pump housing, which may allow coolant to enter and contact the pump?s circuit board.BMW indicated that further analysis identified a specific machine process error at the sub-supplier that manufactures the water pump housing.Pump housing cracks may cause the circuit board to overheat and lead to smoldering of the water pump.Recall 12V-008 was, thus, amended to include approximately 1,457 MY 2011 Mini Cooper vehicles manufactured from March 31, 2011 through April 22, 2011, when pumps manufactured with the suspect manufacturing process may have been used in vehicle assembly.The amendment to Recall 11V-521 was assigned a new recall number, Recall 12V-161, and covered approximately 2,846 MY 2011-2012 BMW 5-Series, 6-Series, 7-Series, X5, and X6 vehicles manufactured from April 1, 2011 through August 1, 2011.The amendment to Recall 11V-522 was assigned a new recall number, Recall 12V-166, and covered approximately 69 MY 2011 Rolls-Royce Ghost vehicles manufactured from April 7, 2011 through June 2, 2011.The Office of Defects Investigation (ODI) analyzed complaint data provided by BMW as well as complaints submitted to ODI from consumers. In total, there were 30 unique Mini Cooper reports indicating engine fire.In addition, BMW provided warranty data showing 493 claims for replacement of the subject component on Mini Cooper vehicles.Owners of the recalled vehicles are notified to take their vehicle to a BMW dealer, who will replace the auxiliary water pump to prevent any incidents related to this issue.This preliminary evaluation is closed.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers (ODI Nos.):10286597, 10286663, 10289793, 10310677, 10314796, 10342365, 10394808, 10394192, 10403982, 10418325, 10422646, 10429003.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249431Customer complains of a musty odor or damp front footwell carpet.
- 10244507MINI electrical systems have continued to develop over the past few years. As a result, the demand on the batteries has increased. Breakdowns due to an empty battery or problems in the vehicles electrical system can have various causes, most of which are not due to the battery itself. For this reason, a battery replacement will permanently eliminate the problem only in the rarest of cases. The energy diagnosis test module helps to localize these causes. This document covers important information for the dealer on how to handle discharged battery complaints. Without performing the energy diagnosis test plan, the root cause of a discharged battery cannot be identified. In order to properly repair the vehicle the first time, it is very important that the diagnostic test plan is performed to completion; with all results taken into consideration.
- 10216755N18 engine high pressure fuel pump (hdp): limited warranty extension to 10 years/120,000 miles
- 10206696New RDC wheel electronics will be introduced with future generation MINI models. The new wheel electronics are identified as Huf Generation 5. These new wheel electronics will need to be programmed using the new tool when replaced or when depressurized (0 psi) for more than 2 minutes.
- 10193497MINI Water Pump Class Action Settlement
- 10179827OC3 SEAT OCCUPANCY MAT - LIMITED WARRANTY EXTENSION TO 10 YEARS/120,000 MILES: Component-Specific Limited Warranty Extension For the above-referenced vehicles, MINI USA, a division of BMW of North America, LLC (MINI USA) is extending the limited warranty for the front passenger's OC3 seat occupancy mat (shown) to: 10 years/120,000 miles as determined by the vehicle's original in-service date.
- 10171506CLASS ACTION SETTLEMENT: N14 HIGH-PRESSURE FUEL PUMP (HDP) SERVICE BENEFIT CLASS VEHICLES: The MINI vehicle may experience a sudden engine operational failure reduced or loss of power while driving and the malfunction indicator lamp (MIL) may be illuminated along with high-pressure fuel pumprelated faults stored in the Engine Control Module (DME). PROCEDURE Perform the corresponding diagnosis/vehicle test and run the test plans to completion as applicable.
- 10162461Air Conditioning System Leak Testing. The customer complains of poor or no air conditioning cooling. After further diagnosis, the system is found to be low or empty of a refrigerant charge, but when using an electronic leak detector, no leak can be found. CAUSE: In most cases, an electronic leak detector is not sufficient for identifying small leaks in the system. Electronic leak detectors can give false alarms and can lead to an improper diagnosis of small leaks. A leak cannot be located exactly if accessibility is impaired (in the case of the expansion valve, evaporator or condenser).
- 10162460Service Action: Checking or Replacing the Door Sill Trim Strips. The door sill trim strips are deformed and/or peeling up at the corners. CAUSE: Insufficient surface preparation of the door sill.
- 10162442"Service Action: Retrofit of the Engine Coolant Temperature Sensor. Internal corrosion could form in the engine coolant temperature sensor. This corrosion leads to internal bridging of the contacts, which can cause an inaccurate engine temperature reading. This false reading could lead to difficulty in the engine starting and/or a ""Service Engine Soon"" lamp being illuminated."
- 10160298N18 THERMOSTAT WITH THERMOSTAT HOUSING: LIMITED WARRANTY EXTENSION TO 10 YEARS/ This Service Information bulletin supersedes SI M01 02 18 dated May 2018.
- 10160229N18 THERMOSTAT WITH THERMOSTAT HOUSING: LIMITED WARRANTYEXTENSION TO 10 YEARS/ This Service Information bulletin supersedes SI M01 02 18 dated May 2018.
- 10153778OC3 seat occupancy mat: limited warranty extension to 10 years/120.
- 10152680"MANUAL TRANSMISSION - STIFF DIAGONAL GEARSHIFT LEVER MOVEMENT. The customer may complain of a ""stiff diagonal shift"" (e.g., N-R, R-N, 2-3/3-2 or 4-5/5-4). Also, in some cases, gears cannot be selected, or the selector gear does not go into the neutral position. CAUSE 1. The deflection lever circlip of the gearshift mechanism is damaged or missing. 2. Possible corrosion at the gearshift mechanism (shift cables or transmission gearshift unit)"
- 10152360"The Service Engine Soon (MIL) lamp is illuminated and/or the customer complains that the engine runs rough (engine cold or warm) with any of the following misfire faults stored in the DME: * 2771, 2772, 2773, 2775, 2776, 2777, 2779, 277A, 277B, 277D, 277E, 277F - ""Combustion misfire, cylinder 1..4"", sometimes together with: * 2781, 2782, 2783 - ""Combustion misfire, multiple cylinders"" On rare occasions, the Service Engine Soon lamp may not be illuminated (with misfire faults still stored in the DME) when the vehicle is brought to the workshop. Multiple causes related to electrical and mechanical engine components, or poor fuel quality in combination with unfavorable driving behavior (low loads and short driving distances). This condition may lead to possible clogging of the injector tips, causing a disturbance of the fuel spraying pattern or excessive carbon deposits on the intake valves/ports, resulting in reduced air flow into the combustion chambers."
- 10152359N18 Engine: FC 37DE Engine Ventilation, Heating, Triggering Stored in the DME After Programming. The Service Engine Soon lamp is illuminated after reprogramming the vehicle to integration level R056-11-11503 (ISTA/P P45.1.3.0) or higher. When diagnosed, the following fault code is stored in DME fault memory: ??37DE Engine ventilation, heating, triggering: open circuit CAUSE Due to a DME software change, the diagnostic monitoring capability is improved for the engine ventilation heating system. However, a fault will be stored in the fault memory because the engine ventilation heater circuit has a malfunction currently present.
- 10152335Brake Fluid Maintenance Service: 36-Month Interval. The CBS displays the first brake fluid service as a 36-month interval from the date of production, instead of the appropriate 24-month interval. Only vehicles within the specified production range can be serviced and covered by this bulletin. For vehicles outside of the production range specified in this bulletin, refer to the CBS and/or Key Read information for the brake fluid service.
- 10151349Bluetooth Connection Failures This Service Information bulletin supersedes SI M84 01 14 dated February 2016.. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware
- 10151347Delay in Automatic Driving Light Switching on/off. When driving out of a tunnel or exiting underground parking, the automatic driving light remains switched on for two minutes. Shut-off period varies based on detected situation. This is normal operational behavior.
- 10151221"N18 Engine High-Pressure Fuel Pump (HDP): Limited Warranty Extension to 10 Years/120,000 Miles. For the above-referenced vehicles, MINI USA, a division of BMW of North America, LLC (""MINI USA"") is extending the limited warranty for the engine's High-Pressure Fuel Pump (HDP) to: 10 years/120,000 miles as determined by the vehicle's original in-service date Item #1: This ""componentspecific"" limited warranty extension applies to defects in materials and workmanship and is subject to the applicable vehicle and coverage eligibility requirements, exclusions and limitations that apply to the New MINI Passenger Car Limited Warranty. Important Note: This limited warranty extension only applies to the listed vehicles produced up to and including 2/29/2012 (Leap year). Vehicles produced on or after 3/1/2012 are fitted with different equipment. This bulletin is notice of a ""limited warranty extension."" This is NOT a notice of a Recall or Service Action. There is no immediate repair required unless the MINI vehicle is currently experiencing this problem. Even though this is NOT a Recall, MINI USA will be sending VIN-specific customer notification letters in a phased release."
- 10151060This Service Information bulletin supersedes SI M84 01 14 dated November 2014. SUBJECT Bluetooth Connection Failures. There are various connectivity failures with the following devices: z Apple iPhones z Samsung S6 and the S6 Edge. Connectivity failure examples are: z Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. z Contact List incomplete z General connection failures z Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) z Samsung S6 and S6 Edge device firmware
- 10150985?OC3 SEAT OCCUPANCY MAT: LIMITED WARRANTY EXTENSION TO 10 YEARS/120,000 MILES. This Service Information bulletin supersedes SI 01 11 16 dated December 2016.
- 10150399"Service Action: Retrofit of the Engine Coolant Temperature Sensor. Internal corrosion could form in the engine coolant temperature sensor. This corrosion leads to internal bridging of the contacts, which can cause an inaccurate engine temperature reading. This false reading could lead to difficulty in the engine starting and/or a ""Service Engine Soon"" lamp being illuminated."
- 10150396"Cooper S with N14: Diagnosis for Misfire Faults. The Service Engine Soon (MIL) lamp is illuminated and/or the customer complains that the engine runs rough (engine cold or warm) with any of the following misfire faults stored in the DME: ??2771, 2772, 2773, 2775, 2776, 2777, 2779, 277A, 277B, 277D, 277E, 277F - ""Combustion misfire, cylinder 1..4"", sometimes together with: ??2781, 2782, 2783 - ""Combustion misfire, multiple cylinders"" On rare occasions, the Service Engine Soon lamp may not be illuminated (with misfire faults still stored in the DME) when the vehicle is brought to the workshop. Multiple causes related to electrical and mechanical engine components, or poor fuel quality in combination with unfavorable driving behavior (low loads and short driving distances). This condition may lead to possible clogging of the injector tips, causing a disturbance of the fuel spraying pattern or excessive carbon deposits on the intake valves/ports, resulting in reduced air flow into the combustion chambers."
- 10150357?SUBJECT DWA (Anti-theft Alarm System): False Alarm Is Triggered Intermittently. When the vehicle is parked and locked (DWA active), the alarm system is triggered intermittently. One or more of the following conditions may trigger the alarm system: Sun roof in the tilted/open position, Window partially open, Excessive local noise (for example, near an airport, on a busy road, or in heavy rain) CAUSE Normal sensitivity of the interior ultrasonic sensor.
- 10150356"Discharged Battery: Energy Diagnosis Must Be Performed. MINI electrical systems and advancements in vehicle technology have resulted in an increased demand on the vehicle battery. This SI will help the dealer handle ""discharged battery"" complaints. A discharged battery can have various causes, most unrelated to the battery. A failed battery is often the symptom and not the cause. A fully serviceable battery fails when an electrical component causes the battery to discharge; the battery becomes internally damaged and must be replaced. For more information, refer to http://www.batteryuniversity.com/parttwo-42B.htm. For this reason, replacing the battery is not usually a permanent repair. The cause of the discharged battery must be analyzed in order to guarantee a proper repair. To properly repair the vehicle the first time in the workshop, the diagnostic test plans must be performed to completion, with all results taken into consideration. The procedure below will guide the technician to properly repairing the vehicle and getting paid for a warranty claim. CAUSE Discharged battery."
- 10150353"Service Action: Retrofit of the Engine Coolant Temperature Sensor. Internal corrosion could form in the engine coolant temperature sensor. This corrosion leads to internal bridging of the contacts, which can cause an inaccurate engine temperature reading. This false reading could lead to difficulty in the engine starting and/or a ""Service Engine Soon"" lamp being illuminated."
- 10150352"Service Action: Retrofit of the Engine Coolant Temperature Sensor. Internal corrosion could form in the engine coolant temperature sensor. This corrosion leads to internal bridging of the contacts, which can cause an inaccurate engine temperature reading. This false reading could lead to difficulty in the engine starting and/or a ""Service Engine Soon"" lamp being illuminated."
- 10150351"Service Action: Retrofit of the Engine Coolant Temperature Sensor. Internal corrosion could form in the engine coolant temperature sensor. This corrosion leads to internal bridging of the contacts, which can cause an inaccurate engine temperature reading. This false reading could lead to difficulty in the engine starting and/or a ""Service Engine Soon"" lamp being illuminated."
- 10150347During Engine Oil Service a Small O-Ring Is Found in the Oil Filter Housing. No customer complaint has been received. During the scheduled engine oil service, the technician notices a black rubber o-ring lying on the bottom of the engine oil filter housing. The o-ring has been dislodged from the non-return valve inside the engine oil filter housing. No subsequent engine damage occurs from the dislodged o-ring. Engine oil filter housing (1) Rubber o-ring (2) The material dimensions of the rubber o-ring are not satisfactory, allowing it to become dislodged from its installation location.
- 10150309Squeaking Noise from Front Seat. A noise may be heard from the front driver's seat back when the customer applies sideways pressure during cornering. CAUSE Surface corrosion on the metal seat back frame can make a squeaking noise when rubbing against the foam rubber padding of the seat back.
- 10150308Bonnet Lock Difficult to Open or Close. The bonnet lock fails to operate correctly and is difficult to open or close. CAUSE Corrosion in the bonnet lock assembly
- 10150306"Erroneous ""Service due"" Message Though Brake Lining Thickness Sufficient. The CBS data calculated for the remaining distance of the front and/or rear brake pads does not agree with the actual brake pad thickness. The yellow brake lining service due indicator illuminates even though the pad thickness is greater than the minimum wear limit (approximately 3.7 mm); the brake wear sensor has not yet been activated (from a thickness of approx. 4.2 mm). In some cases, the red warning message may already be active. The CBS front/rear brake display is based on a mathematical calculation. Various influences are incorporated into this calculation (for example, vehicle speed, brake pressure, and rotor temperature). Due to changing driving characteristics and/or unfavorable environmental conditions, the calculated remaining distance may differ from actual pad thickness."
- 10150305Adjusting Rear Camber. Rear camber cannot be adjusted properly. CAUSE Repair instructions not followed properly
- 10150303Service Action: N14 Engine Retrofit Turbocharger Engine Oil Supply Line Heat Shield. After switching off the engine, the heat radiating from the turbocharger may cause the engine oil to solidify in the oil supply line to the turbocharger. This can lead to a restriction in the oil supply line, resulting in damage to the turbocharger bearings. CAUSE Close proximity of the turbocharger engine oil supply line and the turbocharger
- 10150269Intermittent Humming or Buzzing Noise from Speedometer. When the vehicle is decelerating, an intermittent humming or buzzing noise coming from the instrument cluster may be heard when the speedometer needle is between 0 and 12 mph. Hardware error in the instrument cluster
- 10150241Incorrect Customer Relations Telephone Number Is Saved in the Vehicle. The customer is not connected to MINI Customer Relations after dialing the number displayed in the vehicle Kombi or radio. CAUSE During the Pre-Delivery Inspection (PDI), the incorrect telephone number is being written into the vehicle. INFORMATION 1. When performing the PDI test plan, it is extremely important that you select MINI if the ISID is configured for both BMW and MINI. 2. After completion of the PDI test plan, verify that the customer relations number stored in the vehicle is correct. 3. The correct customer relations phone number is 1(866) 275-6464. 4. If the number stored in the vehicle is incorrect and the correct test plan was used, contact your 3g Administrator and have him or her verify the number stored in the ISID. 5.This picture shows the correct number stored in the Combox control unit. Note: To read out telephone number:
- 10150239Brake Fluid Maintenance Service: 36-Month Interval. The CBS displays the first brake fluid service as a 36-month interval from the date of production, instead of the appropriate 24-month interval.
- 10150238"N14 and N18 Engine: High-pressure Pump Repair Instruction. INFORMATION The current version of ISTA/D Repair Instruction 13 51 017, ""Removing and installing or replacing high-pressure pump (N14, N18)"" has a procedure error. The current version of the Repair Instruction states to replace the highpressure supply hose on the N14 engine. The Repair Instruction also states not to replace the high-pressure supply hose on the N18 engine. The N18 portion of the Repair Instruction is incorrect. As an interim solution, follow the procedure outlined below until this portion of the Repair Instruction is corrected. https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/15601.2.M130113... 8/30/2013 Page 2 of 2 All vehicles equipped with the N18 engine and produced from 3/2012 and later. When the engine is fitted with a Bosch High-pressure Pump (1) the highpressure supply hose (2) MUST NOT be replaced when making repairs. The remaining portion of the Repair Instruction and tightning torques are correct. Refer to EPC for the applicable part numbers when making repairs. "
- 10150237?N18 Engine: FC 2BF2 Rail Pressure Sensor Is Stored in DME Fault Memory. The customer states that the Service Engine Soon lamp is illuminated and the following fault is stored in the DME: FC 2BF2 Rail pressure sensor, workspace: pressure too high CAUSE A DME calibration error in the fuel pressure diagnostics results in an increased sensitivity.
Every MINI Cooper S Clubman model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.