2019 Mitsubishi Fuso FEC7TW

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10240443This is a Dealer Letter sent to dealers informing that Mitsubishi Technical Training has launched the 3rd quarterly technician quiz for 2023.
• 10235609This Technical Service Bulletin provides instructions and material safety data sheets for removal of rap-film adhesive residue.
• 10235608This Technical Service Bulletin reviews the regulations that require a label showing the reduction in load carrying capacity be affixed to vehicles when the total net weight of accessories is more than 1.5 percent of the vehicle's gross vehicle weight rating (GVWR) or 100 lbs.
• 10235606This is a Dealer Letter sent to dealers informing that Mitsubishi Technical Training has launched the 2nd quarterly technician quiz for 2023.
• 10191962This Technical Service Bulletin was sent to dealers to provide instructions and Material Safety Data Sheets for Biosol 100 use.
• 10190105This Technical Information Notice was sent to dealers reminding them of the importance of customer satisfaction.
• 10179677Tech Talk is a service newsletter that was sent out to dealers. It covers various topics and reviews the previous months publications.
• 10179674This Technical Information Notice was sent to dealers informing that MMNA has recently received information from Mitsubishi Motors Corporation (MMC) about the effects of the Waterborne (WB) paint process on Mitsubishi vehicles.
• 10179673This Technical Service Bulletin informs dealers they may find a stain or cloudy spot on the body panels after removing the transportation film.due to improper installation of the film.This TSB instructs the dealers of the repair procedure for removal of the stain.
• 10177424SUBJECT: FUSO FE GAS engine diagnosis for low oil pressure warning lamp illumination MODELS: FEC7T, FECZT, FEC9T DESCRIPTION: Certain FUSO FE Gas vehicles equipped with a 6.0 liter L96 gas engine may experience a complaint of low oil pressure indication on the instrument panel. Verify the complaint with a mechanical gauge by removing the oil sender located on top of the engine behind the intake manifold. If this situation occurs, it is imperative to triage and repair the vehicle quickly in order to maximize uptime for the customer. MFTAs goal is to have the vehicle repaired and returned to the customer within 24-48 hours. Please follow the steps in the attachment to triage and repair the vehicle
• 10177422SUBJECT: Proper method for PQR parts return shipping MODELS: FEC52, FEC72, FEC92, FGB72, FEC7T, FECZT, FEC9T DESCRIPTION: When MFTA Service requests that a PQR part to be returned, please follow the instructions below: Package all requested parts into one shipping container. Complete and attach the label on page two of this bulletin to the shipment. For light shipments (less than 150 lbs): Return all requested PQR parts less than 150 lbs via FedEx Ground Freight Collect using Account # 212016110. For heavy truck shipments (over 150 lbs): Contact your Product Support Manager for shipping instructions.
• 10176278SUBJECT: Destruction and scrapping of engine assemblies replaced under warranty MODELS: FEC52, FEC72, FEC92, FGB72, FEC7T, FECZT, FEC9T DESCRIPTION: Engines replaced under warranty must be held for 60 days from claim payment, unless otherwise instructed to return the engine to MFTA or one of its suppliers. At the conclusion of the 60-day warranty retention period, in order to ensure that engines comply with current US EPA regulations, we ask that you follow the procedures outlined on the following pages to ensure that the engine block is damaged and rendered useless for repair or remanufacturing. The Environmental Protection Agency, in regulation 40 C.F.R. 1068.240(b)(3), requires manufacturers to destroy the old engine block (or confirm that it has been destroyed) so that prevention of the engine from re-entering commerce is guaranteed. After the engine is destroyed, take a photo of the damaged portion and the engine serial # and email them to MFTA with your Dealer Code, the VIN and the Engine Serial # in the header of the email. Send the email to mfta_service@daimler.com. IMPORTANT! Failure to properly scrap an engine assembly and notify MFTA may result in claim chargeback.
• 10170812FUSO FE GAS Crankshaft Sensor Relearn
• 10170811FUSO FE GAS Engine Pre-Lube Procedure
• 10170810FUSO FE GAS replacement engine serial number label and engine information plate
• 10170809Fuso Technical Service Center (TSC) Use Process
• 10170808Proper installation of the crankshaft balancer
• 10170807Proper oil level inspection process for the FUSO FE GAS 6.0L L96 gas engine and Allison 1000 series transmission
• 10170806FUSO FE GAS engine diagnosis for low oil pressure warning lamp illumination
• 10170100This is a service newsletter (Tech Talk) that was sent out to dealers.
• 10170099This is an index of Tech Talk newsletter articles released in 2012.
• 10170097This is a service newsletter (Tech Talk) that was sent out to dealers.
• 10170096This is a service newsletter (Tech Talk) that was sent out to dealers.
• 10170087This is a service newsletter (Tech Talk) that was sent out to dealers.
• 10170086This is a service newsletter (Tech Talk) that was sent out to dealers.
• 10170074This is a service newsletter (Tech Talk) that was sent out to dealers.
• 10170071This is a service newsletter (Tech Talk) that was sent out to dealers.