2004 Mitsubishi Fuso FG639
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mitsubishi Fuso › FG639 › 2004
These records cover every 2004 Mitsubishi Fuso FG639. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2004 Mitsubishi Fuso FG639. Newest first.
Mitsubishi fuso truck of america (mfta) IS recalling 156 halogen sealed beam high beam headlamp assemblies sold between october 24, 2007 and december 2, 2008 for use as replacement equipment for certain mitsubishi fuso trucks. these lamps fail to conform to the sae standards or recommended practices referenced in table I of federal motor vehicle safety…
Risk and remedy
Risk
The purpose of this standard IS to reduce deaths and injuries from motor vehicle crashes by providing adequate illumination of the roadway.
Remedy
Mfta will notify owners and replace the headlamps free of charge. the safety recall began on april 15, 2009. owners may contact mfta at 1-856-467-4500.
Mitsubishi fuso IS recalling 15,549 my 1999-2004 fe639, fe649, and fg639 trucks; my 2001-2004 fe640, and my 2003-2004 fh210 trucks equipped with automatic transmissions. normal heat emanating from the exhaust pipe may cause the automatic transmission shift linkage to deform. the effort required to operate the automatic transmission shift control lever may…
Risk and remedy
Risk
The shift control lever may become inoperative, or the physical shift lever position on the shift lever housing gear indicator may not match the actual gear selection at the transmission.
Remedy
Dealers will install a modified automatic transmission shift control lever assembly free of charge. the recall began on august 6, 2008. owners may contact mitsubishi fuso at 1-856-467-4500.
On certain medium duty trucks, rust build-up on the automatic transmission (a/t) shift linkage may cause the linkage to bind. rust build-up IS accelerated in geographic locations that are situated near large bodies of salt water, or in regions with heavy snow/ice melting compound usage in winter months.
Risk and remedy
Risk
The effort required to operate the a/t shift control lever may increase if the linkage binds due to rust build-up. the shift control lever may become inoperative, or the physical shift lever position on the shift lever housing gear indicator may not match the actual gear selection at the transmission.
Remedy
Dealers will install a modified a/t shift control lever assembly. the recall began on september 26, 2005. owners may contact mitsubishi fuso at 1-856-467-4500.
Owner complaints
1 complaints
Latest complaints
- Power train
TL* the contact owns a 2004 mitsubishi fuso fg639. While the vehicle was placed in park, it moved without warning. The contact had to apply the emergency brake in order to completely stop the vehicle. The dealer stated that the vehicle was included in an independent recall regarding the…
TL* the contact owns a 2004 mitsubishi fuso fg639. While the vehicle was placed in park, it moved without warning. The contact had to apply the emergency brake in order to completely stop the vehicle. The dealer stated that the vehicle was included in an independent recall regarding the transmission linkage. The vehicle was repaired; however, the failure recurred. The manufacturer was made aware of the failure. The approximate failure mileage was 85,000. Updated 10/07/16*lj *tr
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10240443This is a Dealer Letter sent to dealers informing that Mitsubishi Technical Training has launched the 3rd quarterly technician quiz for 2023.
- 10235609This Technical Service Bulletin provides instructions and material safety data sheets for removal of rap-film adhesive residue.
- 10235608This Technical Service Bulletin reviews the regulations that require a label showing the reduction in load carrying capacity be affixed to vehicles when the total net weight of accessories is more than 1.5 percent of the vehicle's gross vehicle weight rating (GVWR) or 100 lbs.
- 10235606This is a Dealer Letter sent to dealers informing that Mitsubishi Technical Training has launched the 2nd quarterly technician quiz for 2023.
- 10191962This Technical Service Bulletin was sent to dealers to provide instructions and Material Safety Data Sheets for Biosol 100 use.
- 10190105This Technical Information Notice was sent to dealers reminding them of the importance of customer satisfaction.
- 10179677Tech Talk is a service newsletter that was sent out to dealers. It covers various topics and reviews the previous months publications.
- 10179674This Technical Information Notice was sent to dealers informing that MMNA has recently received information from Mitsubishi Motors Corporation (MMC) about the effects of the Waterborne (WB) paint process on Mitsubishi vehicles.
- 10179673This Technical Service Bulletin informs dealers they may find a stain or cloudy spot on the body panels after removing the transportation film.due to improper installation of the film.This TSB instructs the dealers of the repair procedure for removal of the stain.
- 10176276SUBJECT: AISIN Transmission Repeat Failure Diagnosis Process MODELS: FE639, FE640, FE649, FG639, FH210, FE83D, FE84D, and FE85D DESCRIPTION: This process must be followed for any AISIN transmission assembly that fails during the 12 month/unlimited mileage Parts Warranty. This will help the dealer; MFTA and AWTEC ensure that all installation procedures were followed and that the recently installed transmission is properly diagnosed before another transmission assembly is installed. If an AISIN transmission has a perceived failure after installation, the dealer technician must do the following: 1.Open a Technical Assistance Request (TAR) with the Technical Support Center (TSC) to begin diagnostic support. 2.Attach all documentation, including DTCs, AISIN Transmission Diagnostic Information Form (ATDI0101) and photos/videos as needed. 3.The TSC and AWTEC will review the documentation and if additional diagnostic support is needed, MFTA will dispatch a Product Support Manager to assist with the repair onsite. 4.After thorough diagnosis, and agreement between the dealer, MFTA and AWTEC that the transmission has an internal defect, the TSC will authorize installation of another AISIN transmission assembly.
- 10170102This is a service newsletter (Tech Talk) that was sent out to dealers.
- 10170100This is a service newsletter (Tech Talk) that was sent out to dealers.
- 10170099This is an index of Tech Talk newsletter articles released in 2012.
- 10170097This is a service newsletter (Tech Talk) that was sent out to dealers.
- 10170096This is a service newsletter (Tech Talk) that was sent out to dealers.
- 10170087This is a service newsletter (Tech Talk) that was sent out to dealers.
- 10170086This is a service newsletter (Tech Talk) that was sent out to dealers.
- 10170074This is a service newsletter (Tech Talk) that was sent out to dealers.
- 10170071This is a service newsletter (Tech Talk) that was sent out to dealers.
- 10170070This TSB contains troubleshooting steps for diagnosis of various customer complaints relating to the audio system speakers in Mitsubishi vehicles equipped with original equipment audio components.
- 10032585Mitsubishi truck: dpf caution label. Enclosed IS a replacement self adhesive diesel particulate filter (dpf) caution label to install over the existing label and a replacement dpf hang tag for the truck. The new label and hang tag better describe the characteristics of the dpf regeneration system. No model years listed.
Every Mitsubishi Fuso FG639 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.