2014 Peterbilt 210
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Peterbilt › 210 › 2014
These records cover every 2014 Peterbilt 210. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2014 Peterbilt 210. Newest first.
PACCAR Incorporated (PACCAR) is recalling certain 2009-2010 Peterbilt 210 and 220 trucks; 2012-2018 Peterbilt 210 and 220 trucks; and 2010-2018 Kenworth K270 and K370 trucks. These LFNA trucks have a front axle sway bar link that may come loose on the frame rail end and fall into the path of the drag link, possibly binding the steering system.
Risk and remedy
Risk
If the sway bar link detaches and falls into the drag link, it may impact the ability of the vehicle to steer properly, increasing the risk of a crash.
Remedy
PACCAR will notify owners, and dealers will inspect the upper sway bar link attachment for a hardened washer installed between the bushing and the nut, installing a washer if it is missing, free of charge. The recall began on October 2730, 2017. Owners may contact Kenworth customer service at 1-425-828-5000 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 817-D and 17KWE.
PACCAR Inc. (PACCAR) is recalling certain model year 2013-2015 Kenworth K300 and Peterbilt 210, 220, and 320 chassis manufactured March 14, 2012 to July 14, 2014. The affected vehicles may have loose fitting electrical connectors on the power distribution module which may cause the engine to shut off.
Risk and remedy
Risk
An unexpected engine shut down increases the risk of a crash.
Remedy
PACCAR will notify owners, and dealers will install nylon tie straps to hold the connectors in place until the permanent remedy, a connection position device, becomes available. Both remedies will be provided free of charge. The recall began January 29, 2015. For more information, Peterbilt owners may call 1-940-591-4220 and Kenworth owners may call 1-425-828-5000. PACCAR's number for this recall is 14KWH (Kenworth), and 714-G (Peterbilt).
PACCAR Incorporated (PACCAR) is recalling certain 2012 through 2014 model year Kenworth K300 and Peterbilt 210 and 220 chassis equipped with Sure Power-brand battery equalizers or DC-DC converters containing a particular epoxy sealing, aka 'potting', compound. The specific potting compound used in the subject products for electrical insulation was found to…
Risk and remedy
Risk
If the potting compound is exposed to heat and conducts electricity, there is an increased risk of a vehicle fire and personal injury.
Remedy
PACCAR will notify owners, and dealers will replace the defective component with a new battery equalizer or DC-DC converter, free of charge. The recall began on March 31, 2014. Customers may contact PACCAR at 1-425-468-7400. Kenworth's number for this recall is 14KWD. Peterbilt's number for this recall is 1213J.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010926Info Only Unnecessary starter replacements can result from customer complaints regarding engine starting issues. A new Starter Troubleshooting Guide has been created to provide a comprehensive list of starting system checks, which should reduce unnecessary starter replacements and associated warranty claims. Engine starting system warranty claims now require a completed Starter Checklist, a Battery Pack Midtronics Report, and a Cable Drop Midtronics Report. Claims filed without these documents may be denied.
- 10219235The service information for Bendix Air Dryer maintenance is being updated to include new procedures.
- 10188550Information Only Windshield washer pumps have a high No Trouble Found rate. Washer pumps may fail to spray due to a clogged filter.
- 10177021Information Only: This bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplete information.
- 10177019Fix as Fail: For all conventional models, except 387/587, equipped with Side-of-Cab (SOC) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the SOC exhaust stacks may not be tightened properly. This may allow the exhaust stack to rotate and contact the cab or sleeper.
- 10176033Information only: Hendrickson Softek front axle maintenance intervals and requirements.
- 10173212Information Only Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
- 10173205Information Only: Proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
- 10172036Information Only: Vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead to sensor corrosion.
- 10169787Information Only - Vehicles built with NAMUX software from 2013 to present may experience accuracy issues with the tachometer. The issue can be temporarily resolved using any one of the included procedures.
- 10168703Information Only: This bulletin provides guidance for repairing an air-conditioning system after internal failure of the A/C compressor.
- 10165583Information Only This bulletin provides information about the California Air Resources Board (CARB) Periodic Smoke Inspection Program (PSIP) and Heavy Duty Vehicle Inspection Program (HDVIP).
- 10164375Fix-As-Fail: Two separate causes have been identified as root cause of intermittent low coolant indicator illumination.
- 10162392Information Only - Quick Reference Guide for Electric harness damage repairs.
- 10159676Information Only: Notification that DAVIE4 can be used to program Model 210 and Model 220 Vehicles.
- 10159674Information Only: Proper instructions for closure of power distribution box cover to prevent corrosion.
- 10154733Information: Bendix ACOM Software version 6.16.5.0 for diagnostics may introduce an unrecoverable error. Notice to dealers to replace this version with older software version until Bendix introduces new version.
- 10143649Information - Recommended Practices for Updating ESA Software
- 10128643Fix-As-Fail ? There is an updated plug to fix leaking steer axle hubcaps.
- 10057499Peterbilt: see document search button for owners letter. Models 579 and 567 vehicles built between 01/29/2013 and 04/301/2014 has faulty wiring harness.
- 10056314Peterbilt: see document search button for owner letter. Certain trucks, at time of assembly, may not have a properly seated upper reverse idler feed tube (oil supply line), resulting in bearings having reduced oil pressure.
- 10056025Peterbilt: the malfunction indicator lamp (mil) illuminates due to an engine control unit (ecu) software issue, rear nox sensor, operating correctly.
Every Peterbilt 210 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.