2007 Peterbilt 367
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Peterbilt › 367 › 2007
These records cover every 2007 Peterbilt 367. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2007 Peterbilt 367. Newest first.
PACCAR Incorporated (PACCAR) is recalling certain model year 2006-2016 Peterbilt 587, 579, 567, 389, 388, 387, 385, 382, 379, 378, 367, 365 and 357 trucks manufactured July 25, 2005, to February 26, 2016. The affected vehicles may be equipped with Tire and Rim Certification Labels that list a tire pressure below the actual correct amount. As such, these…
Risk and remedy
Risk
If the tires are underinflated due to the incorrect inflation pressure listed on the label, the truck may not be able to carry the maximum gross vehicle weight rating (GVWR) load listed without experiencing tire failure which would increase the risk of a crash.
Remedy
Peterbilt will notify owners and mail them a corrected Tire and Rim certification label, free of charge. The recall began on June 19, 2015. Owners may contact Peterbilt customer service at 1-940-591-4000. PACCAR's number for this recall is 215-D.
Paccar Incorporated (Paccar) is recalling certain 2004-2013 Peterbilt 379, 357, 378, 367, 388, 365, 389, 385 and 386 trucks manufactured from April 3, 2003, through October 25, 2013 and equipped with tri-drive rear axles and a tag or pusher axle. The affected vehicles may be missing required information from the certification label, specifically the tag…
Risk and remedy
Risk
As a result, the axles may be overloaded or the wrong tires could be installed or the tires could be improperly inflated. All of these issues increase the risk of a crash.
Remedy
Peterbilt will notify owners and dealers will inspect and replace the certification labels missing the necessary information. The recall is expected to begin in January 2014. Customers can contact Peterbilt at 1-940-591-4000. Peterbilt's number for this campaign is 1113-F.
Paccar IS recalling certain model year 2008-2012 kenworth t2000, T660, T700, T800, and W900, as well as model year 2009-2012 peterbilt 365, 367, 384, 386, 387, 388, 389, and 587 trucks equipped with paccar MX engines. the oil module centrifugal spinner filter cap in the paccar MX engine may become loose, possibly allowing the cap to come off and engine oil…
Risk and remedy
Risk
The discharge of engine oil onto exhaust components which are hot, such as when the engine IS under significant load, may cause a fire.
Remedy
Dealers will re-torque the oil module filter cap and install a secondary retention device on the secondary centrifugal spinner filter cap. this service will be performed free of charge. the safety recall IS expected to begin during march 2011. owners may contact kenworth at 1-425-828-5440 and peterbilt at 1-940-591-4196.
Paccar IS recalling 318 my 2007-2009 kenworth T800, W900, and peterbilt 357, 365, 367, 378, 379, 384, 385, 386,388, and 389 trucks equipped with premier trailer hitch assemblies. The pintle hitch assemblies may have been manufactured in a manner resulting in a reduction of fatigue strength of the pivot pins.
Risk and remedy
Risk
This reduction of fatigue strength could cause the pivot pin to crack and eventually break, causing the trailer to detach from the truck while in motion, which could cause a crash that could result in personal injury or death.
Remedy
Dealers will replace the potentially defective pivot pin free of charge. the recall began on april 18, 2008. owners may contact kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4196.
Certain trucks equipped with bendix SR-7 spring brake modulating valves. the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button.
Risk and remedy
Risk
This could delay or failure in applying the parking brakes potentially resulting in a vehicle roll away.
Remedy
Dealers will install a check valve repair kit for the affected SR-7 spring brake modulating valve free of charge. the recall began on august 22, 2007. owners may contact peterbilt at 940-591-4201.
On certain trucks, if the ignition switch IS turned on prior to initial start up in the manufacturing plant or during the filter replacement in the field, a small flame will ignite when the fuel IS added to prime the system.
Risk and remedy
Risk
The possibility exists for the flame to spread resulting in possible equipment damage or physical injury.
Remedy
Dealers will inspect the filter for the date codes of the suspect filters and replace those heating elements free of charge. the recall began on march 21, 2007. owners may contact kenworth at 425-828-5440 and peterbilt at 940-591-4201.
On some peterbilt trucks, certain parts used in the air suspensions have a high copper content causing premature failure.
Risk and remedy
Risk
Failure could cause erratic vehicle handling which can cause a vehicle crash without warning.
Remedy
Dealers will inspect and, when necessary, replace the defective parts. the recall began on january 17, 2007. owners may contact peterbilt at 1-940-591-4196.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Driveshaft separates from tractor
SummaryOn July 13, 2010, the Office of Defects Investigations (ODI) opened an investigation on model year (MY) 2007-2009 Peterbilt tractors equipped with the (SPL170XL extended lube inter-axle driveline).ODI opened this investigation based on one Vehicle Owners Questionnaire (VOQ) and certain Peterbilt field…
SummaryOn July 13, 2010, the Office of Defects Investigations (ODI) opened an investigation on model year (MY) 2007-2009 Peterbilt tractors equipped with the (SPL170XL extended lube inter-axle driveline).ODI opened this investigation based on one Vehicle Owners Questionnaire (VOQ) and certain Peterbilt field reports.During the course of the investigation, ODI reviewed PACCAR's IR (October 22, 2010) response with associated data related to Warranty and complaint information, mined field data, interviewed customers and visited local dealers within the Washington Metropolitan area.PACCARconducted testing regarding torsional loading and identified various causative factors contributed to this safety defect finding.The Defect is a consequence of the bearing surfaces of the SPL170XL extended lube universal joint that attaches the inter-axle driveline to the drive axle becoming prematurely worn due to a breakdown of lubrication and/or excessive heat.Prematurely worn bearing surfaces may result in the u-joint becoming loose and/or binding.This condition may result in universal joint failure, allowing the inter-axle driveline to detach from the axle, which may cause the drive shaft to separate from the vehicle, increasing the risk of personal injury or property damage hazard.ODI learned that the affected population of the alleged defect extended to peer models within PACCAR.In summary, the following vehicles are being recalled: MY 2007 and 2008 Kenworth trucks, models T600, T660, T2000, T800 and W900 and MY 2007/2008 Peterbilt trucks, models357, 378, 379, 385, 386, 387, 388, and 389 allequipped with extended lube inter-axle drivelines manufactured by Dana Corporation.The recall affects vehicles manufactured between February 2, 2006 and April 30, 2007.At this time PACCAR has not yet identified a fix for the inner-axle safety defect and is currently conducting testing with the intent to provide a solution to the failure.ODI will monitor the development of PACCARS testing and ensure a timely repair for the consumer.This investigation is closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10188550Information Only Windshield washer pumps have a high No Trouble Found rate. Washer pumps may fail to spray due to a clogged filter.
- 10177021Information Only: This bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplete information.
- 10177019Fix as Fail: For all conventional models, except 387/587, equipped with Side-of-Cab (SOC) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the SOC exhaust stacks may not be tightened properly. This may allow the exhaust stack to rotate and contact the cab or sleeper.
- 10176033Information only: Hendrickson Softek front axle maintenance intervals and requirements.
- 10173212Information Only Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
- 10173205Information Only: Proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
- 10172036Information Only: Vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead to sensor corrosion.
- 10168703Information Only: This bulletin provides guidance for repairing an air-conditioning system after internal failure of the A/C compressor.
- 10162392Information Only - Quick Reference Guide for Electric harness damage repairs.
- 10159674Information Only: Proper instructions for closure of power distribution box cover to prevent corrosion.
- 10154733Information: Bendix ACOM Software version 6.16.5.0 for diagnostics may introduce an unrecoverable error. Notice to dealers to replace this version with older software version until Bendix introduces new version.
- 10143649Information - Recommended Practices for Updating ESA Software
- 10033584Cummins isx, or cummins ism engines experiencing a premature failure of the fan hub bearings.
- 10027645Peterbilt trucks: the electrical system may shut down due to a power surge. When this occurs, the green light on the comfortclass control panel turns to red.
Every Peterbilt 367 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.