2013 Peterbilt 386
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Peterbilt › 386 › 2013
These records cover every 2013 Peterbilt 386. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2013 Peterbilt 386. Newest first.
PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power…
Risk and remedy
Risk
If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Remedy
PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.
PACCAR Incorporated (PACCAR) is recalling certain model year 2009-2010 Peterbilt 340, 2010, 2012, and 2015-2016 Peterbilt 337, 2010 Peterbilt 335, 2011-2016 Peterbilt 348, 2009 and 2011-2016 Peterbilt 365, 2009 and 2012-2013 Peterbilt 386, 2009-2015 Peterbilt 388, 2015-2016 Peterbilt 389, and 2015 Peterbilt 567 auto hauler vehicles. The affected trucks are…
Risk and remedy
Risk
Higher vehicle speeds and other factors such as tire load and road temperatures may result in premature tire failure, increasing the risk of a crash.
Remedy
Peterbilt will notify owners, and dealers will reprogram the engine's vehicle speed parameters to limit the maximum vehicle speed to the tire speed rating, free of charge. The recall began on January 4, 2016. Owners may contact Peterbilt customer service at 1-940-591-4000. PACCAR's number for this recall is 1115P.
PACCAR Incorporated (PACCAR) is recalling certain model year 2012-2016 Peterbilt 365, 367, 384, 386, 388, 389, 567, 579, and 587 trucks manufactured January 13, 2011, to April 20, 2015. The affected trucks, equipped with extended-body Leece Neville alternators, have alternator charge cables that may chafe against a formed metal freon discharge line.
Risk and remedy
Risk
If the alternator cable rubs through its insulation, an electrical short may occur, increasing the risk of a fire.
Remedy
Peterbilt will notify owners, and dealers will reroute the alternator charge cable away from the metal freon line and install a plastic insulator on the cable end, free of charge. The recall began on September 23, 2015. Owners may contact Peterbilt customer service at 1-940-591-4000. Peterbilt's number for this recall is 715-K.
PACCAR Incorporated (PACCAR) is recalling certain model year 2014-2016 Kenworth T660, T680, T880 trucks manufactured February 18, 2013, to April 10, 2015, and 2011-2016 Peterbilt 386, 389, 567, 579, and 587 trucks manufactured December 13, 2010, to April 20, 2015. The affected trucks, equipped with PACCAR MX-13 engines and Delco-Remy 40SI alternators, have…
Risk and remedy
Risk
If the alternator cable rubs through its insulation, an electrical short may occur, increasing the risk of a fire.
Remedy
PACCAR will notify owners, and dealers will reroute the alternator charge cable away from the metal freon line, free of charge. PACCAR issued an interim notification to owners on July 10, 2015. The recall began on September 16, 2015. Owners may contact Kenworth customer service at 1-425-828-5000 or Peterbilt customer service at 1-940-591-4000. PACCAR's numbers for this recall are 15KWE and 515-F.
Paccar Incorporated (Paccar) is recalling certain 2004-2013 Peterbilt 379, 357, 378, 367, 388, 365, 389, 385 and 386 trucks manufactured from April 3, 2003, through October 25, 2013 and equipped with tri-drive rear axles and a tag or pusher axle. The affected vehicles may be missing required information from the certification label, specifically the tag…
Risk and remedy
Risk
As a result, the axles may be overloaded or the wrong tires could be installed or the tires could be improperly inflated. All of these issues increase the risk of a crash.
Remedy
Peterbilt will notify owners and dealers will inspect and replace the certification labels missing the necessary information. The recall is expected to begin in January 2014. Customers can contact Peterbilt at 1-940-591-4000. Peterbilt's number for this campaign is 1113-F.
Paccar IS recalling certain model year 2012-2013 kenworth T170, T270, T370, T440, T470, T660, T700, T800, W900, and peterbilt 320, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, and 587 vehicles, manufactured from january 31, 2011, through january 19, 2012, and equipped with bendix ATR-6 antilock traction relay valves. in extremely cold conditions…
Risk and remedy
Risk
Unexpected continuous brake application can cause the brakes to overheat and lead to a fire. unexpected continuous brake application can cause the driver to lose control of the vehicle, increasing the risk of a crash. also, the brakes may be applied without illuminating the brake lights, failing to give proper warning to other drivers.
Remedy
Paccar will notify owners, and provide a temporary repair until bendix develops a permanent remedy. this service will be performed free of charge. The safety recall began on february 10, 2012. owner may contact kenworth at 1-425-828-5440 and peterbilt at 1-940-591-4196.
Owner complaints
1 complaints
What owners report most
Latest complaints
- Engine · Unknown or other
A driver purchased this truck used in november of 2017, but we stearman transportation now holds title to vin # , original cummins engine serial # and current cummins recon engine serial # .truck has spent more time in shop than on road since purchase. Taken to [xxx] complaining of a ticking noise…
A driver purchased this truck used in november of 2017, but we stearman transportation now holds title to vin # , original cummins engine serial # and current cummins recon engine serial # .truck has spent more time in shop than on road since purchase. Taken to [xxx] complaining of a ticking noise coming from engine where repair shop verified complaint by removing valve cover and found that the cam was pitted as well as the rocker arm rollers. Found tappets pitted. Found oil contaminated with fine copper and metal particles.found bearings for the mains scratched and first layer gone and copper layer on the crank scratched. Told by [xxx] that cummins technical service bulletin 5411180 explains problems. Told crankshaft could not be reused. All other components damaged as result of oil contamination. Possible carbon packing on piston, timing gears bushings and shaft, oil cooler, high pressure fuel pump and turbo charger replaced recently. Based on rec we had to replace as told our only option because "the old style fuel pump it has ceramic plungers which eventually brake off and get into the oil system as well as the tappets which were softer in material but then later updated to diamond coated if the old style was not replaced this could cause significant damage to engine eventually causing to have the whole engine replaced." tried to get cummins tsb 541180 without success from seller, cummins or [xxx] w/out success. Still have problems with the truck even after putting in a cummins recon engine. We have spent over $80K at least in repairs since purchasing the truck in november 2017. Please at your earliest convenience tell us if there were any recalls on this truck or its parts and provide us with cummins tsb 5411180. All problems have occurred while the truck IS in motion on highway. information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6). *tr
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10188550Information Only Windshield washer pumps have a high No Trouble Found rate. Washer pumps may fail to spray due to a clogged filter.
- 10179370Fix as Fail: Peterbilt has determined that certain model 348, 365, 367, 382, 384, 386, 388, 389, 567, 579, and 587 trucks, built between 4/13/2010 and 3/16/2020 and equipped with a flush mounted battery box, utilized rubber washers that could rub through and cause the aluminum box mounting tabs to rub directly on the steel frame brackets. This could result in cracked battery box mounting angles. Resolution is to add the reinforcement bracket(s) to affected vehicles.
- 10177021Information Only: This bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplete information.
- 10177019Fix as Fail: For all conventional models, except 387/587, equipped with Side-of-Cab (SOC) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the SOC exhaust stacks may not be tightened properly. This may allow the exhaust stack to rotate and contact the cab or sleeper.
- 10176033Information only: Hendrickson Softek front axle maintenance intervals and requirements.
- 10174764Safety Recall Bulletin: Updated with permanent repair path for phase 1 vehicles. The Tractor ABS Lamp May Not Illuminate When ABS Controller Loses Battery and/or Ignition Power. NHTSA recall number is 18V368. Non compliance to FMVSS and CMVSS 121 and 136. Resolution is to Reflash software.
- 10174762Safety Recall Interim Bulletin: The Tractor ABS Lamp May Not Illuminate When ABS Controller Loses Battery and/or Ignition Power. NHTSA recall number is 20V199 Non compliance to FMVSS and CMVSS 121 and 136. Resolution is to Reflash software.
- 10173212Information Only Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
- 10173205Information Only: Proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
- 10172036Information Only: Vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead to sensor corrosion.
- 10169787Information Only - Vehicles built with NAMUX software from 2013 to present may experience accuracy issues with the tachometer. The issue can be temporarily resolved using any one of the included procedures.
- 10168703Information Only: This bulletin provides guidance for repairing an air-conditioning system after internal failure of the A/C compressor.
- 10165711Non Safety Campaign: Peterbilt has determined that certain Model 365, 384, 386, 388, 389, 3895, 587 and 579 vehicles built between March 27, 2012 and January 20, 2019 with Flex Air suspension in a 6x2 configuration have U-bolts that may fail prematurely.
- 10165583Information Only This bulletin provides information about the California Air Resources Board (CARB) Periodic Smoke Inspection Program (PSIP) and Heavy Duty Vehicle Inspection Program (HDVIP).
- 10164375Fix-As-Fail: Two separate causes have been identified as root cause of intermittent low coolant indicator illumination.
- 10162392Information Only - Quick Reference Guide for Electric harness damage repairs.
- 10159674Information Only: Proper instructions for closure of power distribution box cover to prevent corrosion.
- 10154733Information: Bendix ACOM Software version 6.16.5.0 for diagnostics may introduce an unrecoverable error. Notice to dealers to replace this version with older software version until Bendix introduces new version.
- 10143649Information - Recommended Practices for Updating ESA Software
- 10056025Peterbilt: the malfunction indicator lamp (mil) illuminates due to an engine control unit (ecu) software issue, rear nox sensor, operating correctly.
- 10054817Cummins: the def pump connector ground wiring was incorrectly pinned from original equipment manufacturer (oem) factory, on certain trucks. 2013 peterbilt legacy (367, 386, 388, 389).
- 10054792Cummins: the relays and fuses of aftertreatment systems, in wiring harness, IS potentially not adequately secured via original equipment manufacture (oem) and have wire rubbing points, relay damage or rub points.
Every Peterbilt 386 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.