2019 Peterbilt 567
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Peterbilt › 567 › 2019
These records cover every 2019 Peterbilt 567. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
8 recalls name the 2019 Peterbilt 567. Newest first.
PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.
Risk and remedy
Risk
Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.
Remedy
Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.
PACCAR Incorporated (PACCAR) is recalling certain 2016-2022 Peterbilt 567, 579, 2021-2022 Peterbilt 536, 2017-2021 Kenworth T880, 2016-2022 Kenworth T680, 2018-2020 Kenworth T440, 2020 Kenworth T270, and 2021 Kenworth T280 vehicles. The methane detection system will not function if the system loses power.
Risk and remedy
Risk
The operator may be unaware of a system malfunction or the presence of excessive methane levels, increasing the risk of injury or fire.
Remedy
Dealers will re-wire the warning alarm, free of charge. Owner notification letters were mailed December 1, 2022. Owners may contact Peterbilt customer service at 1-940-591-4220, and Kenworth customer service at 1-425-828-5888. PACCAR's numbers for this recall are 21KWH and 21PBN.
PACCAR Incorporated (PACCAR) is recalling certain 2019-2022 Kenworth T880, W990, Peterbilt 567, 579, 389, and 2022 Peterbilt 536, 537 wrecker and auto hauler vehicles. The work brake (winch brake) may unintentionally disengage the service brakes during winching operations, causing the vehicle to roll.
Risk and remedy
Risk
Unintended vehicle movement can increase the risk of a crash or injury.
Remedy
Dealers will update the vehicle software, free of charge. Owner notification letters were mailed on January 3, 2022. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth); or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWG and 21PBM.
PACCAR Incorporated (PACCAR) is recalling certain 2018-2021 Peterbilt 337, 348, 365, 367, 520, 567, Kenworth T270, T370, T440, T470, T800 and T880 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Risk and remedy
Risk
A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy
Dealers will inspect the rail threads and fuel lines, and replace the rail as necessary, free of charge. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth) or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWC and 21PBD.
PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power…
Risk and remedy
Risk
If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Remedy
PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.
PACCAR Incorporated (PACCAR) is recalling certain 2015-2020 Peterbilt 365, 389, 567, and 579 vehicles equipped with a left-hand under hood jumper terminal (option code 2539410). The positive battery jumper terminal cable may be too long, allowing it to chafe against the left front suspension spring and result in an electrical short circuit.
Risk and remedy
Risk
An electrical short circuit can increase the risk of a fire.
Remedy
PACCAR will notify owners, and dealers will inspect the battery jumper terminal cables, and replace them as necessary, free of charge. The recall began April 30, 2020. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's number for this recall is 20PBA.
PACCAR Incorporated (PACCAR) is recalling certain 2018-2019 Peterbilt 337, 348, 365, 367, 389, 567, 579 and 587 trucks and 2018-2019 Kenworth C500, T270, T370, T440, T660, T680, T800, T880 and W900 trucks equipped with automated manual transmissions. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.
Risk and remedy
Risk
Unintended movement of a vehicle can increase the risk of a crash.
Remedy
PACCAR will notify owners, and dealers will update the transmission control module, free of charge. The recall began February 23, 2019. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's numbers for this recall are 18PBE and 18KWH.
PACCAR Incorporated (PACCAR) is recalling certain 2017-2019 Kenworth C500, T600, T660, T680, T800, T880 and W900 trucks, as well as Peterbilt 367, 386, 389, 567, 579 and 587 trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit…
Risk and remedy
Risk
If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.
Remedy
Cummins will notify owners, and dealers will replace the suspect fuel pump cooling circuit screen, free of charge. The recall began November 21, 2018. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's number for this recall is 18E081.
Owner complaints
2 complaints
What owners report most
Latest complaints
- Engine and engine cooling
The contact's company owns a 2019 Peterbilt 567. The contact stated that while an employee was driving the vehicle at an undisclosed speed, the engine failed without warning. The vehicle was towed to an independent mechanic, where metal shavings from the camshaft were found in the engine, leading…
The contact's company owns a 2019 Peterbilt 567. The contact stated that while an employee was driving the vehicle at an undisclosed speed, the engine failed without warning. The vehicle was towed to an independent mechanic, where metal shavings from the camshaft were found in the engine, leading to a diagnosis of a defective camshaft (part number: 2112481). The manufacturer was notified of the failure and referred the contact to a dealer for assistance. The vehicle was then towed to a dealer, where technicians verified the camshaft failure. The contact was informed that no recalls applied to the vehicle and received a repair estimate. Upon investigation, the contact associated the failure with Manufacturer Communication Numbers: E265 (ENGINE AND ENGINE COOLING), E256 (ENGINE AND ENGINE COOLING), and E252 (ENGINE AND ENGINE COOLING). The contact requested part information for the vehicle from the dealer; however, the dealer refused to release the information. The vehicle remained unrepaired. The failure mileage was 247,000.
- Power train
Our driver was in tow with a vehicle when he started experiencing issues with shifting between gears, we advised him to return to the yard to swap trucks and complete the call this was on 3/23/2020. Being short handed due to the stay at home order we downed the truck until we had enough staffing…
Our driver was in tow with a vehicle when he started experiencing issues with shifting between gears, we advised him to return to the yard to swap trucks and complete the call this was on 3/23/2020. Being short handed due to the stay at home order we downed the truck until we had enough staffing to deliver it to peterbilt for inspection and repairs which took place on 3/30/2020. We received a call from [xxx] @ coast counties peterbilt (san leandro) advising me that my truck was 4 days over the one year warranty mark with just 21,594 miles on the truck and I provided me with an estimate to continue with repairs see what was wrong. I advised both [xxx] and [xxx] (service manager) that nhtsa issued 2 recalls (18v-931) and (18e-102) both pertaining to a failed clutches that were installed into roughly 35-75k trucks which included my clutch which matched the serial number affected clutch range provided by eaton and nhtsa on both of the recalls notices. I reached out to paccar and eaton which both agreed to cover a portion of the repairs leaving me with almost a 3K repair bill for a part that was on national recall. Coast counties peterbilt, paccar & eaton acted in bad faith by dismissing both recalls, further their lack of quality assurance resulted in my company sustaining an avoidable loss of revenue inc truck & insurance payments we had to make for a truck we were not able to use for over 3 weeks and could have resulted in someone being seriously hurt. information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6). *Tr
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Quarter Fender Failures
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation (PE21-015) based on one Vehicle Owner Questionnaire (VOQ) and supporting fleet reports. The reports indicated that the subject quarter fenders were prone to cracking and/or separation.After a comprehensive review of the data related to the…
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation (PE21-015) based on one Vehicle Owner Questionnaire (VOQ) and supporting fleet reports. The reports indicated that the subject quarter fenders were prone to cracking and/or separation.After a comprehensive review of the data related to the quarter fender failures on the subject vehicles, ODI did not identify the existence of a safety-related defect trend. Quarter fender failures resulted in a warranty claim rate less than one percent (<1%) of the total vehicle population. All separations, including those due to tread separations, road hazards, etc., accounted for less than point one percent (<0.1%) of the total vehicle population.ODI discovered that the minimum recommended gap between the top of the quarter fender and the bottom of the trailer was not known or being followed. The optional quarter fenders were supplied by Fontaine Spray Systems (FSS), who recommended a two inch (2) gap. ODI analyzed the claim data using a calculated gap. A calculated gap using the top of the quarter fender flap and assuming the trailer is level with the top of the fifth wheel hitch was necessary, as PACCAR doesn't know specifically what trailer a purchaser will couple to the tractor. It is safe to assume no trailers on the market extend below the upper fifth wheel plate, but many do provide additional clearance over the wheels where the quarter fenders are located. ODI determined that 94 percent of warranty claims and 84 percent of separations violated FSS' recommendation.ODI confirmed that the VOQ vehicle and the fleet report vehicles also violated FSS' recommended gap. In one fleet the gap was negative point three inches (-0.3).PACCAR has updated its vehicle specification process and issued a customer advisory notice to existing owners. In light of the low rate of reported failures and separations, further use of agency resources does not appear to be warranted. The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists. The agency reserves the right to take further action if warranted by the circumstances.
- Intermittent Loss of Power Steering Assist
On May 1, 2020, the Office of Defects Investigation (ODI) opened PE20006 to investigate complaints of intermittent loss of power steering assist in Daimler Truck North America (DTNA), Volvo Trucks of North America (Volvo) and PACCAR vehicles equipped with a ZF/TRW (TRW) THP60 steering gear. The investigation focused…
On May 1, 2020, the Office of Defects Investigation (ODI) opened PE20006 to investigate complaints of intermittent loss of power steering assist in Daimler Truck North America (DTNA), Volvo Trucks of North America (Volvo) and PACCAR vehicles equipped with a ZF/TRW (TRW) THP60 steering gear. The investigation focused on 2010-2020 DTNA Freightliner Cascadia, M2 and WST; Volvo VN, VAH and VHD and PACCAR 337, 365, 389, 567, 579 model vehicles.Field reports and interviews with fleet drivers allege that high power steering fluid temperatures could result in internal seal and bearing failures causing pressure fluctuation, affecting left and right-hand turns. The inability of the driver to steer the vehicle as intended can increase the risk of a crash and injury. ODI analyzed data provided by TRW, DTNA, Volvo, and PACCAR in response to individual information request letters.ODI found that most failures occurred within the first two years and/or 50,000 miles of service. The claim rate decreased with time and miles in service and remained less than 0.5%. ODI normalized data from each of the manufacturers and determined that there was not a substantial difference in the failures.Additionally, TRW improved a seal in the steering gear in December 2015.Trucks built on or after 2016 (as 2017 and newer model years) show a decreasing trend of failures. In view of the overall low failure rate, the nature of early-life failure, and failure rate trending downward for model years 2017 and newer, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010926Info Only Unnecessary starter replacements can result from customer complaints regarding engine starting issues. A new Starter Troubleshooting Guide has been created to provide a comprehensive list of starting system checks, which should reduce unnecessary starter replacements and associated warranty claims. Engine starting system warranty claims now require a completed Starter Checklist, a Battery Pack Midtronics Report, and a Cable Drop Midtronics Report. Claims filed without these documents may be denied.
- 110097577/700 Service Agreement - Letter Only.
- 11005516Fix As Fail The height control valve (HCV) rod on vehicles with low air leaf suspensions is prone to toggling over center during rough road conditions. With full suspension articulation, HCV bracket flexes and toggles over center the HCV linkage, which results in either deflated airbags or makes them unable to inflate. Fix-as-fail start date is 07/30/2024.
- 10245639Fix As Fail Updated: Two part numbers added: 1818119 DPF Delta Pressure Sensors for MX-13-2 EMY18 2200138 DPF Delta Pressure Sensors for MX-13 -2, EMY19 Per Environment and Climate Change Canada (ECCC) regulations and guidance (Canadian Environmental Protection Act, 1999 (CEPA)), a letter has been provided to owners of Canadian registered chassis that provides a list of emissions components that have been reported (to ECCC) as having a defect.
- 10238387Fix-as-Fail - HVAC Intermittently Stops Blowing Cold Air
- 10232162Fix As Fail Chassis that were manufactured with certain battery cable routing brackets may experience rubbing or chafing of the battery cables.
- 10232160Certain Engine Model Year 2018 PACCAR MX-11 engines must have the crankcase pressure sensor replaced due to contamination during assembly.
- 10231101This campaign is the final opportunity to replace the oil filter screw cap to reduce occurrences of broken bypass valve tabs. Broken oil valve tabs can cause oil flow obstruction to critical engine parts, resulting in serious engine damage. Customers that do not receive this repair may be responsible for progressive engine damage caused by broken oil bypass valve tabs.
- 1022717221PBN LNG/CNG Methane Detecti on System Will Not Warn Operator if System Loses Power NHTSA ID:21V00N, TC: 2021-793
- 10225578Info Only - PACCAR is introducing Over-the-Air (OTA) software updates for engine MY17 and newer chassis equipped with Cummins X15, X12, ISX12, ISX12N, L9N, PX-7, and PX-9 engines The technology will leverage the existing Remote Diagnostic cs hardware to deliver secure software updates remotely. This will reduce downtime and save on maintenance costs for eligible vehicles.
- 10222269Fix-As-Fail On certain chassis with Low Air Leaf Suspension or Low-Low Air Leaf Suspension, the Height Control Valve (HCV) arm may be rubbing on other components when the bend in the arm is facing outboard. Flipping the bend in the HCV arm inboard prevents the rub.
- 10219235The service information for Bendix Air Dryer maintenance is being updated to include new procedures.
- 10208758Due to major data carriers phasing out 3G networks, chassis currently utilizing first generation Peoplenet Mobile Gateway (PMG001) will experience severe 3G service degradation as early as January of 2022. Chassis currently utilizing 3G antennas as a primary antenna may experience this degradation.
- 10208756A frame mounted left-hand marker light bracket interferes with the rear fuel tank fill location. A redesigned bracket can be purchased that relocates the marker bracket to the front fuel tank bracket to eliminate interference.
- 10207154Interim Safety Recall Methane detection system will not warn the operator if the system loses power. The driver could be unaware of an issue with the methane detection system or excessive methane present, increasing the risk of a fire, crash and/or personal injury. The repair procedure will be added when it is available.
- 10206097Non-Safety Campaign: Drivers of vehicles equipped with PACCAR TX-12 transmissions may experience harsh shifts and gear grinding noise. Premature Main Drive Gear damage may occur due to clutch housing and main case countershaft bearing bore wear.
- 10206090Safety Recall Work Brake May Unintentionally Disengage NHTSA ID: 21V906, TC: 2021-713. The work brake (also known as winch brake) may unintentionally disengage during winching operations, releasing the service brakes, increasing the risk of crash or injury. The VECU software will be updated to correctly set the speed interlock parameter.
- 10206084Non-Safety Campaign: Eaton Endurant transmissions may experience premature Main Drive Gear damage due to clutch housing and main case countershaft bearing bore wear. A Clutch Housing Front Cover Kit will be installed to address the issue.
- 10203783Non-Safety Campaign - Vehicles with a Cummins X15 engine and Horton fan drive may set Diagnostic Trouble Code (DTC) 6637 and/or 3838 due to fan speed that results in the fan remaining activated until the power is cycled. A new controller will resolve the issue.
- 10201965Fix-As-Fail Due to undersupply issues, only a limited supply of Diesel Exhaust Fluid (DEF) sensors are available. As a temporary solution, after PACCAR confirms a DEF sensor is not available, a temporary software update will allow a vehicle to continue operation with a failed DEF sensor by disabling the DEF sensor diagnostics.
- 10198812Safety Recall Interim Notification - The Daytime Running Lamps (DRLs) may turn off while the vehicle is in motion and the headlamps, fog lamps or turn signals are not on. This is non-compliant with Canadian Regulation CMVSS 108, which states that the DRLs must be on while the vehicle is in motion without certain other lamps being activated. This bulletin will be updated when a repair is available.
- 10198809Safety Recall Cummins Fuel Rail Leak NHTSA ID: 21V391 / TC: 2021-323, Cummins Recall: C2423.Cummins PX9 and ISX12 fuel rails may leak around a sealing washer, potentially resulting in fuel leaks.Undetected prolonged diesel fuel spray in the presence of an ignition source may increase the risk of fire.
- 10194769Selected engines have been identified to receive a camshaft inspection and an update for improved camshaft lubrication.
- 10188550Information Only Windshield washer pumps have a high No Trouble Found rate. Washer pumps may fail to spray due to a clogged filter.
- 10188468Non-Safety Campaign Chassis with the City Horn option may generate unexpected alerts. A VECU software update is available to resolve the issue.
- 10188467Non-Safety Campaign The batteries may drain quickly due to the VECU not going to sleep. Updated VECU software is available to resolve the issue.
- 10186168SmartNav 2.0 Hardware retrofit for quality validation and vehicle validation units.
- 10185190Fix-As-Fail - Prior versions of Eaton Endurant transmission software may be prone to setting Linear Clutch Actuator (LCA) fault codes leading to possible LCA hardware replacement.
- 10185189Non-safety campaign: Vehicles equipped with an Eaton Endurant 12 speed transmission may experience transmission service lamp activation, no gear engagement from neutral, and/or DTC 511 FMI 7 or 10 is set. Resolution is to update the transmission software and calibrations.
- 10185187Fix-As-Fail - Prior versions of PACCAR transmission software may be prone to setting Linear Clutch Actuator (LCA) fault codes leading to possible LCA hardware replacement.
- 10183724Fix as Fail The HVAC system, on model 579 and 567 vehicles manufactured since 1/20/2012 may have inadequate temperature control. The HVAC may intermittently stop blowing cold air, typically after a truck restart. Driver may notice the system returns to normal after key cycle. The remedy is updating HVAC software.
- 10182219Fix as Fail: Peterbilt has introduced an improved mounting bracket for low mount air tanks for vehicles built between January 01, 2017 and July 06, 2020. Torsional vibration may stress the currently-installed brackets and cause them to fail near the bottom of the frame rail.
- 10180809Safety Recall: Peterbilt has decided that a condition could exist in certain model 348, 365, 367, 389, 520, and 567 vehicles built between 11/19/2019 and 4/09/2020. Vehicles equipped with Watson & Chalin SL2065 lift axles may have lower rear pivot bolts that are not long enough to sufficiently engage the locking feature of the corresponding nuts. In some cases, this condition may cause a loss of clamp load of the pivot joint (arm to axle). Extended use of the lift axle in this condition can result in foreign object debris on the roadway, increasing the risk of a crash and/or injury.
- 10179370Fix as Fail: Peterbilt has determined that certain model 348, 365, 367, 382, 384, 386, 388, 389, 567, 579, and 587 trucks, built between 4/13/2010 and 3/16/2020 and equipped with a flush mounted battery box, utilized rubber washers that could rub through and cause the aluminum box mounting tabs to rub directly on the steel frame brackets. This could result in cracked battery box mounting angles. Resolution is to add the reinforcement bracket(s) to affected vehicles.
- 10177939Fix as Fail: Peterbilt has designed an improved Secondary Chassis Module (SCM) bracket which is available for Models 567/579 built between January 01, 2018 and February 20, 2020. SCM brackets impacted by torsional stress may separate from the back of cab crossmember.
- 10177935Fix-As-Fail - Bendix New-Gen Lightweight Steer Axle Drum Brake Spider Cracking
- 10177021Information Only: This bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplete information.
- 10177019Fix as Fail: For all conventional models, except 387/587, equipped with Side-of-Cab (SOC) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the SOC exhaust stacks may not be tightened properly. This may allow the exhaust stack to rotate and contact the cab or sleeper.
- 10176033Information only: Hendrickson Softek front axle maintenance intervals and requirements.
- 10174763"Safety Recall: NHTSA recall number is 20V130. A defect, which relates to motor vehicle safety, may exist in certain Model 365, 389, 567, and 579 vehicles manufactured between April 18, 2014 and March 09, 2020 with a left-hand under hood jumper start terminal. Jumper terminal battery cables may be too long, or eligible for improved routing. Battery cables that are too long may chafe against the left front suspension leaf spring, which could cause a short circuit, fire under the hood, or increased risk of crash. "
Every Peterbilt 567 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.