2012 Peterbilt Model 220
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Peterbilt › Model 220 › 2012
These records cover every 2012 Peterbilt Model 220. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2012 Peterbilt Model 220. Newest first.
PACCAR Incorporated (PACCAR) is recalling certain 2009-2010 Peterbilt 210 and 220 trucks; 2012-2018 Peterbilt 210 and 220 trucks; and 2010-2018 Kenworth K270 and K370 trucks. These LFNA trucks have a front axle sway bar link that may come loose on the frame rail end and fall into the path of the drag link, possibly binding the steering system.
Risk and remedy
Risk
If the sway bar link detaches and falls into the drag link, it may impact the ability of the vehicle to steer properly, increasing the risk of a crash.
Remedy
PACCAR will notify owners, and dealers will inspect the upper sway bar link attachment for a hardened washer installed between the bushing and the nut, installing a washer if it is missing, free of charge. The recall began on October 2730, 2017. Owners may contact Kenworth customer service at 1-425-828-5000 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 817-D and 17KWE.
PACCAR Incorporated (PACCAR) is recalling certain 2012 through 2014 model year Kenworth K300 and Peterbilt 210 and 220 chassis equipped with Sure Power-brand battery equalizers or DC-DC converters containing a particular epoxy sealing, aka 'potting', compound. The specific potting compound used in the subject products for electrical insulation was found to…
Risk and remedy
Risk
If the potting compound is exposed to heat and conducts electricity, there is an increased risk of a vehicle fire and personal injury.
Remedy
PACCAR will notify owners, and dealers will replace the defective component with a new battery equalizer or DC-DC converter, free of charge. The recall began on March 31, 2014. Customers may contact PACCAR at 1-425-468-7400. Kenworth's number for this recall is 14KWD. Peterbilt's number for this recall is 1213J.
PACCAR is recalling certain model year 2012-2013 Kenworth K270 and K370 vehicles, manufactured from November 23, 2011, through September 27, 2012, and model year 2012-2013 Peterbilt 210 and 220 vehicles, manufactured from July 29, 2011, through September 25, 2012, for failing to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS)…
Risk and remedy
Risk
Vehicles that use a combination of both fog lights and head lights or daytime running lights and headlights may be too bright for oncoming traffic, possibly distracting them and increasing the risk of a crash.
Remedy
PACCAR will notify owners, and dealers will change the wiring harness free of charge. The recall began on November 16, 2012. Owners may contact Kenworth at 1-425-828-5000 or Peterbilt at 1-940-591-4000.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10188550Information Only Windshield washer pumps have a high No Trouble Found rate. Washer pumps may fail to spray due to a clogged filter.
- 10177021Information Only: This bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplete information.
- 10177019Fix as Fail: For all conventional models, except 387/587, equipped with Side-of-Cab (SOC) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the SOC exhaust stacks may not be tightened properly. This may allow the exhaust stack to rotate and contact the cab or sleeper.
- 10176033Information only: Hendrickson Softek front axle maintenance intervals and requirements.
- 10173212Information Only Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
- 10173205Information Only: Proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
- 10172036Information Only: Vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead to sensor corrosion.
- 10169787Information Only - Vehicles built with NAMUX software from 2013 to present may experience accuracy issues with the tachometer. The issue can be temporarily resolved using any one of the included procedures.
- 10168703Information Only: This bulletin provides guidance for repairing an air-conditioning system after internal failure of the A/C compressor.
- 10165583Information Only This bulletin provides information about the California Air Resources Board (CARB) Periodic Smoke Inspection Program (PSIP) and Heavy Duty Vehicle Inspection Program (HDVIP).
- 10164375Fix-As-Fail: Two separate causes have been identified as root cause of intermittent low coolant indicator illumination.
- 10162392Information Only - Quick Reference Guide for Electric harness damage repairs.
- 10159676Information Only: Notification that DAVIE4 can be used to program Model 210 and Model 220 Vehicles.
- 10159674Information Only: Proper instructions for closure of power distribution box cover to prevent corrosion.
- 10154733Information: Bendix ACOM Software version 6.16.5.0 for diagnostics may introduce an unrecoverable error. Notice to dealers to replace this version with older software version until Bendix introduces new version.
- 10143649Information - Recommended Practices for Updating ESA Software
- 10054017Peterbilt: transition plan available for davie4 diagnostic tool for certain trucks. Models 220, 210.
- 10052558Peterbilt: some trucks built with starter interlock, which allows starting in forward or reverse gear, when selected but does not meet specific fmvss 102 S3.1.3 approach for automatic transmission, and may to modify system in order to start truck in neutral position. Model 2012 210, 220.
- 10052553Peterbilt: information provided regarding the frame rail and charge air cooler pipe and the clearance between that IS inadequate and to inspect and if necessary correct condition. Model 210/220. No model years listed.
Every Peterbilt Model 220 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.