2017 RAM 4500
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2017 RAM 4500. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2017 RAM 4500. Newest first.
Chrysler (FCA US, LLC) is recalling certain 2017-2018 Ram 2500 Pickup, Ram 3500 Pickup, 3500 Cab Chassis, 4500 and 5500 Cab Chassis vehicles. The hydraulic control unit (HCU) may fail, which can cause the anti-lock brake (ABS), electronic stability control (ESC), and traction control systems to fail.
Risk and remedy
Risk
A loss of anti-lock brakes, electronic stability control, or traction control can increase the risk of a crash.
Remedy
Dealers will replace the brake HCU, or replace the HCU motor, free of charge. Owner notification letters were mailed beginning January 9, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is C4B.
Chrysler (FCA US, LLC) is recalling certain 2012-2021 RAM 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles. Incorrect information in the Service and Owner's Manuals may cause the flanged lug nuts to be over-tightened, which could result in a broken wheel stud and possible wheel separation.
Risk and remedy
Risk
Wheel separation can cause a vehicle crash.
Remedy
Dealers will update the torque specification in the owner's manual and other published service documents. Dealers will also inspect the vehicle's wheel studs, replacing them if necessary, free of charge. Owner notification letters were mailed on November 30, 2021. Campaign Y36 owner notification letters were mailed on November 30, 2021. Campaign Y26 owner notification letters were mailed on December 1, 2021. Owners may contact FCA US customer service at 1-800-853-1403. FCA US's numbers for this recall are Y26 and Y36.
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb)…
Risk and remedy
Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Chrysler (FCA US LLC) is recalling certain 2017-2018 RAM 1500, 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position.…
Risk and remedy
Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners and dealers will update the Body Control Module software. Dealers will also test the BTSI operation, replacing the solenoid as necessary. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U11.
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from…
Risk and remedy
Risk
If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy
Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the…
Risk and remedy
Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Chrysler (FCA US LLC) is recalling certain 2013-2017 RAM 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, equipped with Cummins 6.7L Turbo Diesel engines that have Concentric-brand water pumps without a vent hole. These water pumps may leak coolant.
Risk and remedy
Risk
The leaking water pump can increase the risk of an engine compartment fire.
Remedy
Chrysler will notify owners, and dealers will replace the water pumps, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T51.
Owner complaints
5 complaints2 involved a crash3 injuries
What owners report most
Latest complaints
- Forward collision avoidance › Automatic emergency braking · Service brakes
Manufacturer Recall NumberC4B NHTSA Recall Number24V-896 there is a abs module recall on this truck we rear ended a city bus three people seriously injured . and hurt we have been calling for 5 years no help please help [XXX] blackjack towing and recovery [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Service brakes, hydraulic
See attached document for complaint.
- Service brakes, hydraulic
The contact owns a 2017 Ram 4500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable…
The contact owns a 2017 Ram 4500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.
- Air bags · Power train › Transfer case (4-wheel drive) · Suspension
The contact owns a 2017 RAM 4500. The contact stated while towing 3 vehicles and driving 60 mph, when the front of the vehicle began to vibrate. The contact stated no warning light was illuminated. The contact stated he continued driving but began to change to the right lane when he heard a loud…
The contact owns a 2017 RAM 4500. The contact stated while towing 3 vehicles and driving 60 mph, when the front of the vehicle began to vibrate. The contact stated no warning light was illuminated. The contact stated he continued driving but began to change to the right lane when he heard a loud abnormal noise coming from under the vehicle. The contact lost control of the vehicle and crashed into the ditch. The air bags did not deploy. The contact stated no one was injured or sought medical attention. No police report was filed. The vehicle was not drivable. The contact towed the vehicle to a local dealer, where it was diagnosed with needing the transfer case to be replaced. The vehicle was not repaired but was pending repairs. The manufacturer had been informed of the failure. The failure mileage was approximately 280,000.
- Power train
TL* the contact owns a 2017 RAM 4500. While driving various speeds, the transmission erroneously switched into neutral and the vehicle decelerated. During the failure, the service engine indicator illuminated and the display indicated that the transmission was still in the drive position. After…
TL* the contact owns a 2017 RAM 4500. While driving various speeds, the transmission erroneously switched into neutral and the vehicle decelerated. During the failure, the service engine indicator illuminated and the display indicated that the transmission was still in the drive position. After shifting into neutral and back into drive, the vehicle operated normally. The vehicle was taken to spitzer dodge (30101 s. Dixie hwy, homestead, fl) to be diagnosed, but the failure could not be duplicated. The vehicle was not repaired and the failure continued. The manufacturer was not notified of the failures. The failure mileage was 20,000. ..*Bf determined it was a relay and spitzer fixed it under warranty. No issues since january 2019.*jb
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Post Recall Remedy Brake Transmission Shift Interlock (BTSI) Failure
The Office of Defects Investigation (ODI) has received 14 Vehicle Owner Questionnaire (VOQ) reports and 6 EWR Death & Injury (D&I) reports describing post recall remedy failures of the brake transmission shift interlock (BTSI) system in certain Model Year (MY) 2013-2018 RAM pickup trucks.The subject vehicle models…
The Office of Defects Investigation (ODI) has received 14 Vehicle Owner Questionnaire (VOQ) reports and 6 EWR Death & Injury (D&I) reports describing post recall remedy failures of the brake transmission shift interlock (BTSI) system in certain Model Year (MY) 2013-2018 RAM pickup trucks.The subject vehicle models include 1500, 2500, 3500, 4500, and 5500 trucks equipped with a column mounted shift lever.The failures of the BTSI described in the VOQs occurred on vehicles that had all previously been repaired under recall 17V-821 or 18V-100.Both recalls address a potential condition which can cause the BTSI locking pin to become stuck allowing the transmission to be shifted out of Park without depressing the brake pedal and/or without having a key in the ignition.Shifting the transmission out of Park when not having the brake pedal depressed can result in a vehicle rollaway. ODI is opening this Recall Query (RQ) to review the effectiveness of the 17V-821 and 18V-100 recall remedies, understand the root cause of additional vehicle rollaway incidents, and identify any other possible root cause that may affect the performance of the BTSI system. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
- Front Driveshaft Failure
On December 12, 2019, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 19-017 after receiving three Vehicle Owner Questionnaire (VOQ) reports alleging failures of the front driveshaft and/or transfer case, resulting in conditions of 1) a loss of engine power, 2) loss of steering assist…
On December 12, 2019, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 19-017 after receiving three Vehicle Owner Questionnaire (VOQ) reports alleging failures of the front driveshaft and/or transfer case, resulting in conditions of 1) a loss of engine power, 2) loss of steering assist, 3) loss of foundation brakes, 4) unintended air bag deployment and 5) engine/cab fires from combustible fluids striking hot exhaust components. The VOQs involved model year (MY) 2015 through 2017 RAM 4500 and 5500 vehicles. ODI received information from the vehicle manufacturer [Fiat Chrysler Automobiles (FCA)] via information request letters dated February 28, 2020, and April 21,2020. Supplemental information was received on March 17, 2021. A review of the responsive manufacturer information, and related meetings and presentations, showed that the transfer case failures in 97.5% of the claims did not disable the vehicle. Since analysis showed that a failed driveshaft could result in catastrophic damage to the transfer case as well as other safety risks (i.e. steering/brake failures etc.), ODI shifted the investigation to focus only on the front driveshaft failures. The double cardan universal joint design requires maintenance lubrication within every 8000 miles. Despite an under-hood maintenance reminder label and professional servicing at both dealers and independent repair facilities, the driveshafts were often found to be unlubricated due to lack of awareness, difficulty of the operation or the lack of the special tools needed to perform the work. To increase the maintenance lubrication rates, in the summer of 2021, FCA launched a communications campaign, circulating awareness bulletins, training information, special tool options and instructional videos through more than a dozen channels covering both dealer and independent repair facilities. Additionally, in the fall of 2021, FCA mailed a VIN-specific letter to each registered owner reminding them of the maintenance needs, and also sent a special grease gun adapter to every FCA US dealer and fleet operator with an FCA US dealer code. Since January 2022,NHTSA has not received a complaint of front driveshaft failure due to lack of lubrication that can lead to failure conditions such as loss of engine power, loss of steering assist, loss of foundation brakes, unintended air bag deployment and engine/cab fires. This drop in complaints, the communications campaign launched by the manufacturer, and the absence of reports from the manufacturer, support the closing of this Preliminary Evaluation. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11000608Valve - EGR
- 10251783Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10244356LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10243209FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
- 10243208Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
- 102427956.7L New Oil Usage Information Incorrect oil used. This bulletin provides information regarding the correct oil grade to use on the 6.7L Cummins used in the 2023 to 2013 HD Trucks. The following information is intended to eliminate confusion.
- 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- 10239957Water Quality When Mixed With Engine Coolant
- 10236933wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
- 10236873Ambient Air Temperature Missing, Malfunction Indicator Lamp (MIL) Lamp On, Diagnostic Trouble Code (DTC) P0070-15 Ambient Air Temperature Sensor Circuit-Circuit Short to Battery or Open, P0073 Ambient Air Temperature Sensor Circuit High
- 10236871Ambient Temperature Sensor Servicing.
- 10234420Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
- 10231735Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
- 10231712Malfunction Indicator Lamp (MIL) Illumination. NOx Sensor Diagnostic Trouble Codes (DTCs) Diagnosis Information.
- 10230189Left Hand Drivers Side Mirror Takes Longer to Defrost Or Clear Than Right Side Passenger
- 10230183No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration
- 10230180Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
- 10229993NUT, Wheel Flange Wheel Nut Service Torque should be 175 N-M.
- 10229988NUT, Wheel Flange Wheel Nut Service Torque should be 190 N-M.
- 10229572Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10229454Cooler - egr
- 102293416.7L New Oil Usage Information This bulletin provides information regarding the correct oil grade to use on the 6.7L Cummins used in the 2019 and newer HD Trucks. The following information is intended to eliminate confusion.
- 10229041Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination Or Extended Operation After Key Off
- 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- 10226002Guidelines For The Use Of Alternative Diesel Fuels.
- 10225992Ambient Temperature Sensor Servicing.
- 10225424Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10225369Ambient Temperature Sensor Servicing.
- 10225287Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10225232Ambient Temperature Sensor Servicing.
- 10224953RA3 and RA4 Radio Enhancements This bulletin involves inspecting and if required, updating the radio software. Customers may experience one or more of the following:Radio functions/touchscreen locks up (does not affect backup camera). Phone presets do not save. ?Navigation Failed? message is displayed. Navigation is inoperative or inaccurate. CD player will not play songs and/or locks up the radio. Clock will not automatically update to local time. Clock may be off by several hours. (RA3 only). Poor or no connection to cellular network. ?Charge Complete? notification is not received (RU PHEV only). Some Uconnect App remote commands do not execute with the vehicle. Radio Apps are inoperative. Radio display screen is black or blank. Battery drain - due to radio staying on. Navigation failed message is displayed. Clock not automatically updating to local time. Improvements:Auto Play can now be configured. Media devices, Phone pairing and Bluetooth usage improvements. Add the ability to drag and drop icons into the menu bar. Adds ?Do Not Disturb? text message feature. Fix for radio locks up/frozen. Enhanced Voice recognition (VR) performance. Improved tuner performance. Human Machine Interface (HMI) improvements. Satellite radio reception improvements.
- 10224936RA3 and RA4 Radio Enhancements This bulletin involves inspecting and if required, updating the radio software. Customers may experience one or more of the following:Radio functions/touchscreen locks up (does not affect backup camera). Phone presets do not save. ?Navigation Failed? message is displayed. Navigation is inoperative or inaccurate. CD player will not play songs and/or locks up the radio. Clock will not automatically update to local time. Clock may be off by several hours. (RA3 only). Poor or no connection to cellular network. ?Charge Complete? notification is not received (RU PHEV only). Some Uconnect App remote commands do not execute with the vehicle. Radio Apps are inoperative. Radio display screen is black or blank. Battery drain - due to radio staying on. Navigation failed message is displayed. Clock not automatically updating to local time. Improvements:Auto Play can now be configured. Media devices, Phone pairing and Bluetooth usage improvements. Add the ability to drag and drop icons into the menu bar. Adds ?Do Not Disturb? text message feature. Fix for radio locks up/frozen. Fix for radio loses time. Enhanced Voice recognition (VR) performance. Media devices, phone pairing and Bluetooth usage improvements. Improved tuner performance. Human Machine Interface (HMI) improvements. Satellite radio reception improvements.
- 10224903Rocker Arm If normal diagnosis has led to a broken rocker arm, please replace all 12 rockers. Contact Stephen Alvarado at the STAR Center at (866) 799-1695 ext. (4720271) to arrange a fast track return for the parts. Cummins engineering is currently investigating the root cause to this condition and would like to get these parts back for analysis.
- 10224745Flash: Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Engine Control Module/Powertrain Control Module (ECM/PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set:P1C55 - NOx Sensor Intermittent - Bank 1 Sensor 1. P202E - Reductant Injector Performance. P218F - Reductant No Flow Detected. In addition, the following software enhancements are also available:Fuel filter minder improvement. Calibration changes to engine-off timer. Changes to engine warm up protection. Hydrocarbon Desorption (HCD) driveability improvements. A/C pressure sensor update. Exhaust Gas Recirculation (EGR) calibration changes.
- 10224022(Rev. A) Power Inverter Load Ratings
- 10223967Flash: Drivetrain Control Module (DTCM) Update This bulletin involves reprogramming the DTCM with the latest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set::If the customer has any concerns with the transfer case or if the tech performs any repairs on the transfer case, the software must be updated.C140E - Transfer Case Motor Blocked. If DTC C140E is present, follow normal diagnostic procedures before updating the DTCM.In addition the customer may describe the following:The ?Service 4WD? message/fault is displayed in the Instrument Panel Cluster (IPC). Transfer case shift fork tabs broken during range shift. Noisy (clunking/ratcheting) transfer case range shifts. Failure to complete transfer case range shifts. The following software enhancement is available:This update will help reduce premature transfer case failure.
- 10223939Revision A: Intermittent Engine Buck, Surge, or Misfire.
- 10223862A/C compressor Before replacing the AC compressor for noise or in-op. call one of the individuals below.~ Steve Rice at cell (248) 867 0061~ Mark Briolat at cell (248) 345-0127~ If no response in 15 minutes, please continue with repair.
Every RAM 4500 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.