2022 Renegade Verona
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Renegade › Verona › 2022
These records cover every 2022 Renegade Verona. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Owner complaints
2 complaints
What owners report most
Latest complaints
- Fuel/propulsion system
Significant fuel leak over (hot) transmission. Service provider found leak coming from crossover lines. Lines were tightened and cleaned. Technician stated two lines were not tightened properly at the factory. This remedied leak.
- Wheels
* TPMS is faulty. Gauges intermittently report a high heat warning which is too high for a tire to actually reach without blowing up. I've used an infrared camera to capture the actual temperature. The warning gauge claims temps are above 250 degrees farenheit when the actual temp per the camera…
* TPMS is faulty. Gauges intermittently report a high heat warning which is too high for a tire to actually reach without blowing up. I've used an infrared camera to capture the actual temperature. The warning gauge claims temps are above 250 degrees farenheit when the actual temp per the camera reading is 80 -90 degrees * False periodic readings are causing us to ignore this system which could lead to blowouts and accidents when there is a real problem with tire temperatures * We've called the Freightliner dealer and they stated this is a known problem. When we took it in for service the warning didn't occur so they said they couldn't address the issue.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10211716Describe the defect or noncompliance: Wrong fasteners used with adhesive on awning brackets Describe the safety risk: The possibility of the fasteners working loose causing the awning to malfunction or loosen from the sidewall Identify any warning which can precede or occur: Awning moving from sidewall when operating Describe the cause: Self drilling screw used in place of lag screw going into a wood backer. Chronology of Defect / Non-compliance Determination Provide the chronology of events leading up to the defect decision or test data for the non-compliance decision: 4/26/2022 Production line discovered self drilling screws were being used, instead of lag screws, when install the awning brackets with an adhesive behind the bracket. Identify the Remedy Loosen and lift awning off mounting brackets, remove wrong screws, add sealant to hole, install correct lag screws. Describe the defect / non-compliance remedy program, including the manufacturers plan for reimbursement. At no cost to the customer, Renegade will have the self-drilling screws removed and replaced with the correct lag screws. Describe what distinguishes the remedy component from the TSB component. Lag screws are made for wood backers. Self drilling screws are made for metal. Identify and describe how and when the recall condition was corrected in production. On 4/26/2022 Production became aware of the issue, all units affected that were still on the premises were repaired using the correct lag screw.
Every Renegade Verona model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.