1998 Spartan Gladiator
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Spartan › Gladiator › 1998
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 1998 Spartan Gladiator. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
4 recalls name the 1998 Spartan Gladiator. Newest first.
Spartan IS recalling certain model year 1998 through 2010 advantage, barron, gladiator, metrostar, mountain star, and TR-1 fire apparatus chassis cabs manufactured between february 27, 2003 and november 17, 2009 and belts sold to various vehicle alters. certain seat belt anchorages fail to conform to the requirements of federal motor vehicle safety…
The seat belt may separate from the cab during a vehicle crash and fail to properly restrain the occupant. this may result in personal injury to the seat occupant.
Spartan will notify owners and repair the vehicles free of charge. the safety recall began on june 2, 2010. owners may contact spartan chassis at 1-800-543-4277 - option 1.
Vehicle description: fire trucks. these fire trucks are all 4-door models which contain dual, forward facing passenger seats. the hardware utilized to mount the seat box to the cab floor and to the backwall structure, and also to mount the type 1 seat belt systems, was inadequate to meet the requirements of fmvss nos. 207/210, ""seating systems" and…
The seat box mounting/restraining hardware can loosen or fail allowing the seat/seat box assembly to break free of its mounting to the cab floor and/or backwall which could cause injury to the occupants of those seats.
Dealers will replace the seat box mounting fasteners.
Vehicle description: fire trucks. if the driver accelerates in a turn above 20 mph forward speed, the lock pin IS actuated and causes the axle to resist returning to the straight ahead position after the turn IS completed because the lock pin IS binding on the clamp plate surface.
Engaging the lock pin in the lcmp plate hole at high forward speeds causes excessive wear in the lock pin and/or the clamp plate hole. lane changes and other vehicle maneuvers will greatly increase contact frequency and causes wear, increasing the risk of loss of vehicle control.
Dealers will replace the tag axles on these fire trucks.
Vehicle description: fire trucks. a defective electrical harness, part no. 200185, was used on these fire trucks, causing an inoperative 'check transmission light.' there would be no in-cab indication of a transmission fault which could lead to an inoperative vehicle if not serviced according to the transmission failure codes.
The transmission could lock in a range and upshift/downshift would be restricted, increasing the risk of a vehicle crash.
Dealers will repair the wiring in these harnesses.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.