2002 Strick Van
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Strick › Van › 2002
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2002 Strick Van. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
1 recall names the 2002 Strick Van. Newest first.
On certain dry freight vans equipped with stemco pro-torq axle nut system, it IS possible that wheels can separate due to improper installation or failure of the lock ring provided with the pro-torq axle nut system.
Wheels separating from the vehicle increases the risk of a crash.
Owners/dealers will inspect the wheels. if snap lock ring IS installed wrong, it will be removed and re-installed correctly. owner notification began june 18, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact strick at 1-260-692-6121.
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
The closing of this investigation does not constitute a finding by nhtsa that no safety-related defect existed or continues to exist.further use of agency resources does not appear to be warranted.the agency will continue to monitor this problem closely and reserves the right to take further action if warranted by the circumstances.see attached technical report for full details.
Odi opened this investigation based on a fleet complaint where information was furnished indicating that wheel bearings were failing at an unusually high rate.in 29 cases these failures allegedly resulted in a wheel end fire or a wheel separation.during the investigation it was determined that the subject vehicles were built with low maintenance wheel ends.documents obtained by odi indicate that widespread confusion existed in this industry concerning maintenance requirements.the issues were:frequency of maintenance, amount of grease to be used, and proper method of inspection.several meetings were held involving the axle manufacturer, (arvinmeritor), lubrication manufacturer (mobil), several trailer manufacturers and fleets.currently odi has data which indicates that 255 trailers from a certain build period have wheel ends failing at a higher rate than peer trailers with the same wheel ends.odi IS upgrading this investigation to determine why the one group IS failing at a higher rate than others with the same wheel ends.in order to resolve this matter, odi will be contacting the axle manufacturer, the bearing and grease manufacturers, fleets and will further investigate the issue with strick directly.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.