1976 Tmc MC8
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 1976 Tmc MC8. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 1976 Tmc MC8. Newest first.
The involved vehicles have the following non-compliances: the low air warning signal may not activate until the service reservoir pressure IS below 60 psi. In addition, the brake release time may exceed 0.55 seconds at the right front wheel, which constitutes a non-compliance to federal motor vehicle safety standard no. 121, "air brake systems".
Risk and remedy
Remedy
Dealer will adjust the pin switch to the proper pressure to bring the vehicle into compliance with safety standard no. 121.
The involved vehicles may not comply with federal motor vehicle safety standard no. 121, "modulated emergency braking". The "o" rings in the shuttle valve may develop slight leaks in cold weather. In addition, neoprene washers used on these "o" rings may eventually expand or pucker in cold climates, making it possible for the shuttle piston to become…
Risk and remedy
Remedy
The dealer will replace the two neoprene washers with glass filled teflon washers that will not be affected by cold climates.
Every Tmc MC8 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.