2024 Toyota Sequoia Hybrid
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Sequoia Hybrid › 2024
These records cover every 2024 Toyota Sequoia Hybrid. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2024 Toyota Sequoia Hybrid. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Tundra, Tundra Hybrid, and 2023-2025 Sequoia Hybrid vehicles. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number…
Risk and remedy
Risk
A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Remedy
Dealers will update the multimedia display software, free of charge. Owner notification letters were mailed November 19, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB10 and 25TA10.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Sequoia Hybrid, Tundra and Tundra Hybrid vehicles. The passenger-side front and rear tires may have inner sidewall damage, which can cause a sudden loss of tire pressure.
Risk and remedy
Risk
A sudden loss of tire pressure can result in a loss of vehicle control, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the tires as necessary, free of charge. Owner notification letters were mailed December 5, 2024. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 24TA12.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023-2024 Sequoia Hybrid vehicles equipped with a tow hitch cover attached to the rear bumper. The tow hitch cover may come loose from the bumper and detach from the vehicle.
Risk and remedy
Risk
A tow hitch cover that detaches can become a road hazard and increase the risk of a crash.
Remedy
Dealers will replace the tow hitch cover and modify the rear bumper, free of charge. Owner letters were mailed April 7, 2025. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 24TB10 and 24TA10.
Gulf States Toyota, Inc. (GST) is recalling certain Toyota 2023 GR Supra, 2024 4 Runner, Corolla, Grand Highlander, Grand Highlander Hybrid, Land Cruiser Hybrid, Tacoma, Tacoma Hybrid, 2023-2024 BZ4X, Corolla Cross Hybrid, GR Corolla, GR86, Highlander, Highlander Hybrid, Prius, Prius Prime, Sequoia Hybrid, Tundra, Tundra Hybrid, Venza Hybrid, 2023-2025…
Risk and remedy
Risk
A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.
Remedy
GST will mail new labels to owners, free of charge. Owner notification letters were mailed September 16, 2024. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 24R2.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Tundra, Tundra Hybrid, Lexus LX600, and 2023-2024 Sequoia Hybrid vehicles. Unexpected vehicle movement may occur when the vehicle is in neutral and the brakes are not applied.
Risk and remedy
Risk
Unexpected vehicle movement can increase the risk of a crash.
Remedy
Dealers will update the transmission control ECU software, free of charge. Owner notification letters were mailed April 8, 2024. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 24TA02 and 24LA02.
Owner complaints
38 complaints
What owners report most
Latest complaints
- Tires
The contact owns a 2024 Toyota Sequoia Hybrid equipped with Bridgestone Tires, Tire Line: Dueler HT685PF850, Tire Size: 265/50/R22, DOT Number: IW2VV VVDHT1. The contact stated that the tires failed to maintain the proper air pressure causing the tire pressure warning light to remain illuminated.…
The contact owns a 2024 Toyota Sequoia Hybrid equipped with Bridgestone Tires, Tire Line: Dueler HT685PF850, Tire Size: 265/50/R22, DOT Number: IW2VV VVDHT1. The contact stated that the tires failed to maintain the proper air pressure causing the tire pressure warning light to remain illuminated. Additionally, there was a loud thumping sound coming from the tires while driving at various speeds. The vehicle was taken to the local mechanic who was unable to find any leaks or damages to the tires. The tire air pressure was increased but the failure remained. The manufacturer was notified of the issue. The failure mileage was 22,000.
- Service brakes
At every touch of the brakes, light or hard the breaks are extremely squeaky and ear piercingly loud. Toyota has told us a shim kit is available, however, they have been told they are not allowed to install any kits at this time even though they are available to purchase.
- Power train
I have a 2024 Toyota Sequoia for the V35A twin-turbo V6 engine hybrid engine. My most recent oil change is showing signs for metal debris in the oil filter. Why is my vehicle not part of the engine recall?
- Exterior lighting
Component Affected: Exterior Lighting (Tail Lamps) / Electrical System. Description of Defect and Safety Hazard:The rear tail lamp assemblies on this 2024 Toyota Sequoia have suffered a major sealing and adhesive compromise, permitting road dirt and fine debris to bypass internal filters and…
Component Affected: Exterior Lighting (Tail Lamps) / Electrical System. Description of Defect and Safety Hazard:The rear tail lamp assemblies on this 2024 Toyota Sequoia have suffered a major sealing and adhesive compromise, permitting road dirt and fine debris to bypass internal filters and permanently accumulate inside the housing. This is a progressive design defect identical to the one that triggered Toyota’s massive 443,000-unit rear-lighting safety recall (Recall 25TA14 / 25TB14) for platform-sharing Tundras.This constitutes an active safety hazard. The dense layer of road grime and permanent dust obscuring the interior lenses significantly degrades the lumen output, visibility, and daytime reflectivity of the brake lamps, turn signals, and rear running lights. This directly increases the risk of a rear-end collision, particularly in low-visibility or nighttime conditions. Furthermore, the persistent introduction of dirt and sand into an unsealed electronic housing risks premature circuit corrosion, electrical shorts, and complete illumination failure while the vehicle is in transit.Despite bringing the vehicle to two separate licensed dealerships (Daytona Toyota and Parks Toyota) within the original 3-year/36,000-mile factory bumper-to-bumper warranty window (current mileage: 35,821), Toyota and its regional distributor (Southeast Toyota) have refused to replace the defective assemblies, falsely categorizing a structural seal breach as normal environmental behavior.
- Engine
According to Toyota the exact same engine that is in my vehicle has a recall on it. However, since my vehicle has also had a hybrid system installed my engine is not covered. Basically, because the hybrid system offers the engine power relief there saying that the engine is okay which is not true.…
According to Toyota the exact same engine that is in my vehicle has a recall on it. However, since my vehicle has also had a hybrid system installed my engine is not covered. Basically, because the hybrid system offers the engine power relief there saying that the engine is okay which is not true. The same engine is the same engine. The faults of the engine in non-hybrids is the same faults in the hybrid just undiscovered as of yet. A recall should be made in order to update the hybrid engines as well because they contain the at fault parts as the non-hybrid engines.
- Structure › Body
The power liftgate and pinch sensor system on my 2024 Toyota Sequoia Platinum continues to malfunction intermittently and creates an ongoing safety concern. The liftgate frequently fails to close using the electronic controls and instead emits two warning beeps before becoming completely…
The power liftgate and pinch sensor system on my 2024 Toyota Sequoia Platinum continues to malfunction intermittently and creates an ongoing safety concern. The liftgate frequently fails to close using the electronic controls and instead emits two warning beeps before becoming completely unresponsive, forcing the liftgate to be manually pushed shut. The pinch sensor system appears to falsely detect obstructions when none are present, causing unreliable and inconsistent operation of the rear liftgate. Because this is a powered safety-related system, the intermittent failure raises serious concerns regarding occupant safety, system reliability, and the ability to properly secure the rear hatch while the vehicle is in operation. This issue has persisted despite dealership involvement and does not appear to be an isolated incident. Multiple owners have reported similar failures involving the Sequoia liftgate and pinch sensor system. Toyota has not provided a permanent corrective action. For a vehicle at this price point, repeated failures of a powered liftgate safety system are unacceptable. The defect creates the potential for injury, improper liftgate closure, and unsafe vehicle operation. I am requesting that NHTSA investigate this issue for a broader defect pattern and determine whether a recall or manufacturer-required corrective action is warranted.
- Engine · Unknown or other
UNKNOWN. I have NOT had an incident. I own a 2024 Toyota Sequoia SUV that uses the same engine as the hundreds of thousands of Tundra trucks that Toyota has already recalled. They've recalled over 250,000 Tundras because they say "machining debris" may cause a problem that eventually destroys the…
UNKNOWN. I have NOT had an incident. I own a 2024 Toyota Sequoia SUV that uses the same engine as the hundreds of thousands of Tundra trucks that Toyota has already recalled. They've recalled over 250,000 Tundras because they say "machining debris" may cause a problem that eventually destroys the engine's main bearing, resulting in loss of power. [XXX] My problem is, they are NOT recalling the hybrid models that use this exact same engine, to include both Tundras and Sequoias. It seems they do this because the hybrid model still MAY be able to safely exit the road if failure happens because the hybrid battery and motors can still move it. As an owner of a Sequoia, I am concerned that this problem may occur out of warranty, and that I will be stuck with an engine possessing a known defect. At a minimum, Toyota should extend the warranties on these vehicles to cover that known defect. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Seats
The plastic panel underneath the driver’s seat has cracked and broken a SECOND time, despite being repaired at Toyota dealership. Toyota customer care was contacted and while they admitted this is a known issue and they are aware it is happening repeatedly, even after a few months after being…
The plastic panel underneath the driver’s seat has cracked and broken a SECOND time, despite being repaired at Toyota dealership. Toyota customer care was contacted and while they admitted this is a known issue and they are aware it is happening repeatedly, even after a few months after being replaced there is no fix in sight and they will not cover the repair. Size should not matter but I am a smaller person and not applying excess force when seated. I am worried about SAFETY as a secure seat that doesn’t move and break while buckled should be expected and required.
- Seat belts
The second row right seat belt receptacle wiring harness failed on my 2024 Toyota Sequoia. The two wires connecting the seat belt buckle sensor were severed cleanly. The wiring harness is routed through the seat fold/pivot mechanism with insufficient slack or protection. Normal use of the fold-flat…
The second row right seat belt receptacle wiring harness failed on my 2024 Toyota Sequoia. The two wires connecting the seat belt buckle sensor were severed cleanly. The wiring harness is routed through the seat fold/pivot mechanism with insufficient slack or protection. Normal use of the fold-flat seat function caused the harness to be pinched and abraded at the pivot point over time, eventually shearing the wires completely. The seat belt alarm activated continuously even when buckled, as the sensor could no longer detect buckle engagement. The dealer inspected the vehicle and attributed the damage to user fault, declining warranty coverage. Upon self-repair, the cause was clearly mechanical — the harness routing places the wires directly in the path of the seat pivot with no grommet or strain relief. This is a design defect that poses a safety risk, as a non-functioning seat belt sensor may give false readings about buckle status. The failed component is available for inspection.
- Electrical system · Power train · Structure › Body
The power liftgate on my 2024 Toyota Sequoia intermittently fails to close using the automatic function. When pressing the close button (either on the liftgate or key fob), the system beeps twice and does not initiate closing, requiring manual force to shut the liftgate. Additionally, the pinch…
The power liftgate on my 2024 Toyota Sequoia intermittently fails to close using the automatic function. When pressing the close button (either on the liftgate or key fob), the system beeps twice and does not initiate closing, requiring manual force to shut the liftgate. Additionally, the pinch sensor appears to malfunction, falsely detecting an obstruction when none is present. This creates an inconsistent and unreliable operation of the liftgate system. This issue presents a safety concern because the liftgate may not properly secure while driving, increasing the risk of it opening unexpectedly. Furthermore, the failure of the pinch sensor system raises concerns about potential injury, especially to children or passengers, if the sensor does not function correctly during operation. The issue occurs intermittently and has been difficult for the dealership to permanently resolve. This appears to be a broader defect rather than a one-time failure.
- Service brakes
When driving down steep grade, (mountain pass) front brakes will begin to vibrate violently. Very scary when driving the vehicle. When you reach the bottom of the steep incline, the brakes begin to function normally again. I have had this happen on 3 different occasions. I informed the…
When driving down steep grade, (mountain pass) front brakes will begin to vibrate violently. Very scary when driving the vehicle. When you reach the bottom of the steep incline, the brakes begin to function normally again. I have had this happen on 3 different occasions. I informed the dealership of this but they didn't see anything abnormal when they inspected the brakes. The did not attempt to reproduce the problem as there are no extended steep grades nearby to drive down. There were no warning lamps displayed.
- Forward collision avoidance › Automatic emergency braking · Service brakes · Unknown or other
On three separate occasions we have lost braking power preventing instantaneous stopping, and control of the vehicle. They partially work when your foot is pushing on the pedal all the way to the floor. This occurs autonomously without warning and the following occur: Lose breaking power…
On three separate occasions we have lost braking power preventing instantaneous stopping, and control of the vehicle. They partially work when your foot is pushing on the pedal all the way to the floor. This occurs autonomously without warning and the following occur: Lose breaking power, inability to brake and stop at safe distances instantaneously and momentarily, Brake ABS alarm, Parking Support Brake Malfunction ("Visit Your Dealer"), Check Engine, Collision Assistance fails, and Traction Control fails. The first occurrence my spouse was driving the vehicle on a 65 MPH three lane highway that at the time was evening rush hour. She had to decrease her speed to 30 MPH in a 65 MPH speed zone in order to slow the vehicle enough at a safe distance from the vehicle in front of her, then continue at a safe distance as traffic ahead of her excelled. Had this happened traveling the speed limit, and had to stop abruptly, this could have either caused severe bodily injury and/or death to her and the vehicle behind and in front of her, and other adjacent lanes. The second occurrence after the dealer looked at it (as covered under warranty), we received the vehicle back. The next day the brakes went out and alarms appeared once again as she pulled out of the driveway. I pulled the vehicle in the driveway for her and couldn't stop and almost drove through my garage at only idling speed. The third occurrence was most recently after an oil change. I drove the vehicle around the block and again, the brakes went out and alarms appeared once again. We have owned this vehicle since May 10th and it has been at dealerships for repair for at least 35 days minimum. On the first occurence they had a regional tech/engineer inspect the vehicle. Nothing was found as problematic and a factory reset was performed - nothing replaced. The second occasion - same outcome... nothing fixed or replaced. The vehicle is in the shop again for the same problem.
- Suspension · Unknown or other
I am submitting this complaint to raise serious safety concerns regarding the towing capabilities of the 2024 Toyota Sequoia. Despite its advertised towing capacity of up to 9,000 pounds, this vehicle is dangerously unstable when towing even modest travel trailers—particularly single axle models…
I am submitting this complaint to raise serious safety concerns regarding the towing capabilities of the 2024 Toyota Sequoia. Despite its advertised towing capacity of up to 9,000 pounds, this vehicle is dangerously unstable when towing even modest travel trailers—particularly single axle models weighing around 4,500 pounds. During a recent vacation, I towed a properly loaded single axle travel trailer using my 2024 Sequoia. The trailer was equipped with: A weight distribution hitch Anti-sway bars Balanced tongue weight and cargo distribution Despite these precautions, the Sequoia was thrown around on the highway, requiring constant correction and resulting in a white-knuckle driving experience. My vacation was ruined, and my safety was put at risk. The trailer now sits unused in my driveway because I cannot safely tow it with this vehicle. The instability appears to stem from the Sequoia’s: Short wheelbase, which reduces towing control Soft suspension, tuned for comfort rather than trailer handling Hybrid drivetrain weight distribution, which may compromise rear-end stability These design choices make the Sequoia unsuitable for towing travel trailers, even well below its rated capacity. RV dealerships, including Camping World, routinely sell trailers to Sequoia owners based solely on the published tow rating. There is no warning or advisory provided about the vehicle’s real-world towing limitations. This practice is misleading and dangerous. I urge Toyota and the NHTSA to take the following steps: Issue a Technical Service Bulletin (TSB) or formal advisory warning owners about towing instability with the Sequoia. Educate RV dealerships about the limitations of SUV towing dynamics, especially with single axle travel trailers. Investigate owner complaints and consider a broader safety review of the Sequoia’s towing performance. There are multiple online reports and forums where Sequoia owners share similar experiences. This is not an isolated incident—it is a sys
- Engine · Fuel/propulsion system · Suspension
Toyota advertises the vehicle MPG is between 19-22. I am only getting 12 mpg. My low gas fuel light comes on at 10 miles to empty. Engine makes a horrible noise after the vehicle has been driven for 10 to 20 minutes. It sounds like a rattling/old clunker vehicle sound. It sounds like the…
Toyota advertises the vehicle MPG is between 19-22. I am only getting 12 mpg. My low gas fuel light comes on at 10 miles to empty. Engine makes a horrible noise after the vehicle has been driven for 10 to 20 minutes. It sounds like a rattling/old clunker vehicle sound. It sounds like the transmission or engine is going to blow up. Vehicle wobbles when driven over 75 miles per hour. It feels like it is swaying in the rear. I have reported these issues to Toyota on 5 occasions. The first 2 attempts, Toyota told me, could not duplicate/no recommendations at this time. A TSB was issued to fix the rattling sound, took the vehicle in a 3rd time and was told it fixed the rattling. It did not, took the vehicle in a fourth time and was told no recommendations at this time. Took it to another Toyota dealership, and they told me no recommendations at this time. I have had 3 certified mechanics not from Toyota listen to the sound and they have advised me that it is not normal. The mechanics said in order to pinpoint where the sound is coming from, the engine needs to be removed and inspected. But they believe it is an issue with the engine/transmission.
- Power train
I have a warning lamp turned on notification randomly every week. I took the vehicle to the dealership for inspection and at this point nobody could find the problem.
- Seat belts
After exiting the vehicle on 3/7/2025, I opened the rear passenger door (driver’s side) to get my son out of his carseat. I noticed the seatbelt was not attached at the base. In other words, the seatbelt mechanism was not attached to the vehicle. See photos. The black cover which conceals the bolt…
After exiting the vehicle on 3/7/2025, I opened the rear passenger door (driver’s side) to get my son out of his carseat. I noticed the seatbelt was not attached at the base. In other words, the seatbelt mechanism was not attached to the vehicle. See photos. The black cover which conceals the bolt that holds the seatbelt to the vehicle was also detatched. On 3/10/25 we brought the vehicle to Mechanicsville Toyota and they have requested to keep it overnight. There were no warning lamps or other signs of failure. The seatbelt bolt was not torqued properly at the factory.
- Unknown or other
The rear hitch cover has been on recall for several months now. Toyota does not seem to have a remedy in place for it. And there has been no further communication regarding when a dealer can replace the component. The cover came off and was crushed while driving.
- Structure · Trailer hitches
The contact owns a 2024 Toyota Sequoia Hybrid. The contact stated that upon driving and arriving at her destination, the contact became aware that the tow hitch protective cover was missing. The vehicle was taken to the dealer, where the contact was informed that it was a known failure. The vehicle…
The contact owns a 2024 Toyota Sequoia Hybrid. The contact stated that upon driving and arriving at her destination, the contact became aware that the tow hitch protective cover was missing. The vehicle was taken to the dealer, where the contact was informed that it was a known failure. The vehicle was not diagnosed or repaired. The contact later received notification of NHTSA Campaign Number: 24V640000 (Structure, Trailer Hitches), which the contact related to the failure; however, the part to do the recall repair was not yet available. The local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 3,000. VIN tool confirms parts not available.
- Electrical system
Trailer brake controller failure but i dont tow, 360 cameras stopped functioning and cameras all distorted. Lost the grid lines. Everything is grayed out. They calibrated in 10,26,2024 but same errors. Took it to toyota dealer they cannot fix. They will contact Toyota support.
- Structure · Trailer hitches
The contact owns a 2024 Toyota Sequoia Hybrid. The contact received notification of NHTSA Campaign Number: 24V640000 (STRUCTURE, TRAILER HITCHES); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a…
The contact owns a 2024 Toyota Sequoia Hybrid. The contact received notification of NHTSA Campaign Number: 24V640000 (STRUCTURE, TRAILER HITCHES); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Fuel/propulsion system
The fuel door does not stay open. It flaps around. This issue becomes problematic while attempting to refuel and insert the fuel nozzle while fighting with the fuel door. On numerous occasions, I was the wind forcing the fuel door closed while trying to insert the fuel nozzle and I depressed the trigger on accident, resulting in fuel spillage.
- Electrical system · Forward collision avoidance › Automatic emergency braking · Steering
It has happened 3 times, every time I have been driving and an alert with flash on the dash that there is an object in the road and it will brake check me, but there isn't anything infront of the vehicle. One time it happened getting off the highway and 2 other times it has happened when I was in a…
It has happened 3 times, every time I have been driving and an alert with flash on the dash that there is an object in the road and it will brake check me, but there isn't anything infront of the vehicle. One time it happened getting off the highway and 2 other times it has happened when I was in a residential area. 2 out of 3 times, a vehicle behind me had to swerve to the shoulder of the road, so they didn't rear end me. Second issue, the hybrid system is not working. The vehicle was parked and when I went to put it in drive, the alert popped up and I had to turn the car off and restart. Third issue, the lane assistance. While driving in the middle lane and going around a 20 or 30 degree right turn, the vehicle pulled me into the left lane, almost side swiping the vehicle next to me.
- Power train · Service brakes · Wheels
AWD System the following massage keep coming up "A malfunction in the All-wheel Drive system has been detected". I took the vehicle to the dealership to be inspected. at this moment nobody can find the problem for this issue.
- Structure › Body
The contact owns a 2024 Toyota Sequoia. The contact stated that the tow hitch detached from the vehicle while going through the car wash. The contact stated that the vehicle was not taken to a dealer nor an independent mechanic to be diagnosed or repaired. The contact was concerned that the tow…
The contact owns a 2024 Toyota Sequoia. The contact stated that the tow hitch detached from the vehicle while going through the car wash. The contact stated that the vehicle was not taken to a dealer nor an independent mechanic to be diagnosed or repaired. The contact was concerned that the tow hitch could have detached while driving on the road and caused an accident. The manufacturer was not notified of the failure. The failure mileage was 41,790.
- Trailer hitches
The contact owns a 2024 Toyota Sequoia. The contact stated while driving at undisclosed speeds, the rear trailer hitch cover detached from the vehicle. There were no warning lights illuminated. The vehicle was taken to the local dealer, who informed the contact that the trailer hitch cover…
The contact owns a 2024 Toyota Sequoia. The contact stated while driving at undisclosed speeds, the rear trailer hitch cover detached from the vehicle. There were no warning lights illuminated. The vehicle was taken to the local dealer, who informed the contact that the trailer hitch cover frequently detached, and the part would not be replaced. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 99.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011639Some 2022 2024 model year Tundra and Tundra Hybrid, 2023 2024 model year Sequoia Hybrid, and 2024 model year Tacoma and Tacoma Hybrid vehicles equipped with a premium 14-inch audio multimedia display may exhibit a condition where the radio receiver power/volume knob becomes detached. An updated radio receiver power/volume knob is available to reduce the possibility of this condition.
- 11010354Some 2022 2024 model year Tundra and Tundra Hybrid, 2023 2024 model year Sequoia Hybrid, and 2024 model year Tacoma and Tacoma Hybrid vehicles equipped with a premium 14-inch audio multimedia display may exhibit a condition where the radio receiver power/volume knob becomes detached. An updated radio receiver power/volume knob is available to reduce the possibility of this condition.
- 11010329Some 2023 2024 model year Sequoia Hybrid and 2022 2024 model year Tundra Hybrid vehicles may exhibit a rattle sound from the hybrid module when the engine is at idle in drive or in reverse once fully warmed up. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to address this condition.
- 11010108Some 2023 2024 model year Sequoia Hybrid and 2022 2024 model year Tundra and Tundra Hybrid vehicles may exhibit a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs) present: P030000 Random/Multiple Cylinder Misfire Detected P030027 Random/Multiple Cylinder Misfire Detected (Emission) Signal Rate of Change Above Threshold P030085 Random/Multiple Cylinder Misfire Detected (Over Temperature) Signal Above Allowable Range The Engine Control Module (ECM) (SAE term: Powertrain Control Module / PCM) logic has been modified to address this condition.
- 11010064Some 2023 2024 model year Sequoia Hybrid, and 2022 2024 model year Tundra and Tundra Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving forward or in reverse.
- 11010059Some customers have expressed concern that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11007440Some 2023 2024 model year Sequoia Hybrid, and 2022 2024 model year Tundra and Tundra Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving forward or in reverse.
- 11007434Some 2022 2024 model year Tundra and Tundra Hybrid, and 2023 2024 model year Sequoia Hybrid vehicles, equipped with a JBL premium sound system, may exhibit a rattle or buzz noise when listening to music coming from the subwoofer located in the rear left luggage area of the vehicle. This can be caused by exposure to certain operating environments with high humidity levels. To improve the subwoofer's performance in humid environments, Toyota has revised the speaker cone material and shape. The condition can be resolved by replacing the subwoofer assembly with box.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006146Some 2023 2024 model year Sequoia Hybrid, and 2022 2024 model year Tundra and Tundra Hybrid vehicles may exhibit a condition where the front brakes produce a squealing noise when driving forward or in reverse.
- 11006140Some 2022 2024 model year Tundra and Tundra Hybrid, and 2023 2024 model year Sequoia Hybrid vehicles, equipped with a JBL premium sound system, may exhibit a rattle or buzz noise when listening to music coming from the subwoofer located in the rear left luggage area of the vehicle. This can be caused by exposure to certain operating environments with high humidity levels. To improve the subwoofer's performance in humid environments, Toyota has revised the speaker cone material and shape. The condition can be resolved by replacing the subwoofer assembly with box.
- 11005156Some 2023 2024 model year Sequoia Hybrid and 2022 2024 model year Tundra and Tundra Hybrid vehicles may exhibit lack of power during acceleration and/or a MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs): P017400 System Too Lean Bank 2 P117B00 Fuel Performance/Direct Injector P043000 Catalyst System Efficiency Below Threshold Bank 2
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005093A head unit software update is now available for 2022 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (version 1020 or earlier). This software update provides improved performance and capability for the following: User Profile configuration and display. Cloud Navigation and Intelligent Voice Assistant. Mobile device connectivity. On-screen display and system settings/configuration. Security enhancements. A head unit software update is now available for 2022 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (earlier than version 1040). This software update includes the following improvements: Cloud navigation. Intelligent assistant voice recognition. Showing and controlling explicit audio content. User interface. Bluetooth. Bug fixes. This software update removes the following feature: Hybrid radio. A head unit software update is now available for 2023 model year Sequoia Hybrid, Tundra, and Tundra Hybrid, vehicles equipped with Toyota Multimedia (version 1040 or earlier). This software update provides improved performance and capability for the following: User Profile. Over-the-air (OTA) notifications. Ability to search during a call. Bug fixes settings/configuration. Security enhancements. A head unit software update is now available for 2023 2024 Sequoia Hybrid, and 2022 2024 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (earlier than version 2050). This software update includes the following improvements: User interface design. Intelligent assistant. Navigation lane guidance. Phone book search. Bug fixes. A head unit software update is now available for 2023 2024 Sequoia Hybrid, and 2022 2024 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (earlier than version 2170). This software update includes the following improvements: User Profile. User interface. Cloud navigation. Intelligent assistant voice recognition. Bug fixes.
- 11005092Some 2023 2024 model year Sequoia Hybrid and 2022 2024 model year Tundra Hybrid vehicles may exhibit a condition where the vehicle starts in second gear from a stop and does not allow a manual shift to first gear (S1) without first switching to 4WD or driving over 15 mph. The brake actuator logic has been modified to address these conditions.
- 11005079Some 2023 2024 model year Sequoia Hybrid and 2022 2024 Tundra and Tundra Hybrid vehicles may exhibit a condition where the functionality of the power driver seat cushion length adjustment (CLA) is inoperative. This condition may occur when operating the control switch with the CLA in the closed position.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005035A head unit software update is now available for 2022 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (version 1020 or earlier). This software update provides improved performance and capability for the following: User Profile configuration and display. Cloud Navigation and Intelligent Voice Assistant. Mobile device connectivity. On-screen display and system settings/configuration. Security enhancements. A head unit software update is now available for 2022 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (earlier than version 1040). This software update includes the following improvements: Cloud navigation. Intelligent assistant voice recognition. Showing and controlling explicit audio content. User interface. Bluetooth. Bug fixes. This software update removes the following feature: Hybrid radio. A head unit software update is now available for 2023 model year Sequoia Hybrid, Tundra, and Tundra Hybrid, vehicles equipped with Toyota Multimedia (version 1040 or earlier). This software update provides improved performance and capability for the following: User Profile. Over-the-air (OTA) notifications. Ability to search during a call. Bug fixes settings/configuration. Security enhancements. A head unit software update is now available for 2023 2024 Sequoia Hybrid, and 2022 2024 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (earlier than version 2050). This software update includes the following improvements: User interface design. Intelligent assistant. Navigation lane guidance. Phone book search. Bug fixes. A head unit software update is now available for 2023 2024 Sequoia Hybrid, and 2022 2024 model year Tundra and Tundra Hybrid vehicles equipped with Toyota Multimedia (earlier than version 2170). This software update includes the following improvements: User Profile. User interface. Cloud navigation. Intelligent assistant voice recognition. Bug fixes.
- 11005034Some 2023 2024 model year Sequoia Hybrid and 2022 2024 model year Tundra Hybrid vehicles may exhibit a condition where the vehicle starts in second gear from a stop and does not allow a manual shift to first gear (S1) without first switching to 4WD or driving over 15 mph. The brake actuator logic has been modified to address these conditions.
- 11005021Some 2023 2024 model year Sequoia Hybrid and 2022 2024 Tundra and Tundra Hybrid vehicles may exhibit a condition where the functionality of the power driver seat cushion length adjustment (CLA) is inoperative. This condition may occur when operating the control switch with the CLA in the closed position.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003640Some 2021 2024 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU. REVISION NOTICE April 18, 2024 Rev2: Applicability has been updated to include 2024 model year Tundra, Tundra Hybrid, Venza Hybrid, bZ4X, Corolla, Corolla Cross, Corolla Cross Hybrid, Corolla Hybrid, Crown, GR Corolla, Corolla Hatchback, Prius, Prius Prime, Sequoia Hybrid, Highlander, Grand Highlander, Grand Highlander Hybrid, Land Cruiser, Tacoma, Tacoma Hybrid, and Mirai vehicles and 2023 model year Corolla Hatchback and Prius Prime vehicles. The Introduction section has been updated. The Operation Procedure section has been removed. The Standard ECU Configuration Procedure and ECU Configuration Value Writing Procedure sections have been added.
- 11003633Some 2022 2024 model year Tundra Hybrid and 2023 2024 model year Sequoia Hybrid vehicles may exhibit a condition where the vehicle starts in second gear from a stop, and does not allow a manual shift to first gear (S1) without first switching to 4WD or driving over 15 mph. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to address these conditions. REVISION NOTICE April 15, 2024 Rev1: The Required Tools & Equipment section has been updated.
- 11003621When certain vehicle ECUs are replaced, the ECU Security Key must be written in order for that ECU to communicate on the vehicle network. The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key. REVISION NOTICE April 11, 2024 Rev2: Applicability has been updated to include 2023 2024 model year 86, Corolla, Corolla Cross, Corolla Cross Hybrid, Crown, GR Corolla, Mirai, Prius, Prius Prime, RAV4 Prime, Sequoia Hybrid, Sienna Hybrid, Tundra, Tundra Hybrid, Venza Hybrid, and Yaris and 2024 model year bZ4X, Highlander, Highlander Hybrid, Grand Highlander, and Grand Highlander Hybrid vehicles. The entire bulletin has been updated to represent GTS+ Software. July 08, 2022 Rev1: Applicability has been updated to include 2022 model year 86, Corolla Cross, Mirai, Tundra, and Tundra Hybrid vehicles and 2023 model year bZ4X vehicles. Any previous printed versions of this bulletin should be discarded.
- 11003620Some 2022 2024 model year Tundra, Tundra Hybrid, and 2023 2024 model year Sequoia Hybrid vehicles, equipped with a JBL premium sound system, may exhibit a rattle or buzz noise when listening to music coming from the subwoofer located in the rear left luggage area of the vehicle. This can be caused by exposure to certain operating environments with high humidity levels. To improve the subwoofer's performance in humid environments, Toyota has revised the speaker cone material and shape. The condition can be resolved by replacing the subwoofer assembly with box.
- 11003619Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
- 11003607Some customers have complained that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.
Every Toyota Sequoia Hybrid model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.