2019 Triumph Speed Twin
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Triumph › Speed Twin › 2019
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2019 Triumph Speed Twin. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
2 recalls name the 2019 Triumph Speed Twin. Newest first.
Triumph Motorcycles America, LTD (Triumph) is recalling certain 2019-2020 Speed Twin motorcycles. The gear shift lever linkage may separate from shifter ball joint, resulting in an inability to change gears.
A loss of ability to change gears may increase the risk of a crash.
Triumph will notify owners, and dealers will secure the attachment with a different thread locking compound, free of charge. The recall began January 27, 2020. Owners may contact Triumph customer service at 1-678-854-2010. Triumph's number for this recall is SRAN 569.
Triumph Motorcycles America, LTD (Triumph) is recalling certain 2019 Speed Twin motorcycles. Improper routing of the coolant hose may cause it to contact the exhaust header pipe, damaging the hose and resulting in a coolant leak near the rear tire.
Loss of coolant near the rear tire may cause a loss of traction, increasing the risk of crash.
Triumph will notify owners, and dealers will inspect the coolant hose routing, rerouting the hose and replacing it if necessary, free of charge. The recall began April 15, 2019. Owners may contact Triumph customer service at 1-678-854-2010. Triumph's number for this recall is SRAN563.
The front brakes lost compression so much that the breaks wouldn't engage until the lever was pulled all the way back to the grip. Took to the shop they said there was air in the line. Front brakes were flushed and fresh brake fluid was added. Brakes felt fine once I got it out of the shop but then lost compression again a few weeks later.
2019 triumph speed twin with brembo front brakes. front brake lever feels mushy on first pull, it's soft enough to pull all the way back to the bar. If released and pulled again immediately, the lever feels normal/much firmer. This "double pull" issue recurs whenever the brakes are not used for more than a minute or so. issue occurs both when the bike IS stationary and in motion. Issue has been occurring since the bike was new. brakes were bled twice by the selling dealer, but the issue persists.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.