2012 Utility 3000R Multi-Temp
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Utility › 3000R Multi-Temp › 2012
These records cover every 2012 Utility 3000R Multi-Temp. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Pintle Hook Loop Failure
The Office of Defects Investigations (ODI) opened this Preliminary Evaluation based on its review of a service bulletin submitted by Utility Trailer Manufacturing Company (Utility).The Service Bulletin (SB-07-011), contained in Utility?s July 2013 579.5 monthly submission, instructed owners of subject trailers to…
The Office of Defects Investigations (ODI) opened this Preliminary Evaluation based on its review of a service bulletin submitted by Utility Trailer Manufacturing Company (Utility).The Service Bulletin (SB-07-011), contained in Utility?s July 2013 579.5 monthly submission, instructed owners of subject trailers to conduct an inspection of the pintle hook loop.The inspection procedure involved striking the loop with a 10 pound sledge hammer and then inspecting it for cracks.Due to a material defect, Utility informed owners there was a potential for the loop (that secures the trailers safety chains) to crack and fail.If the loop fails, this redundant safety component becomes ineffective in retaining the trailer to the towing vehicle should the primary hitch fail or otherwise disconnect.A trailer that has separated from its towing vehicle presents a risk to motor vehicle safety.On July 30th 2014 Utility trailer submitted a voluntary safety recall notice (14V-463) for pintle hook safety chain loop failures.The recall involves certain model year 2012-2014 VS1RA, and 2013-2014 VS1DC, VS2DX, VS2RA, VS3DX, and VS3RA trailers manufactured from April 2011 to May 2013.Utility trailer dealers will inspect and replace the pintle hook safety chain loop as required.This Preliminary Evaluation is closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10165570Service bulletin instructing to use a sharp razor blade to add a 1" wide slit to the reefer floor drain kazoo whenever replacing them in the field. This is to help the pressure inside the trailer equalize with the pressure outside the trailer when the temperature within a Utility reefer changes.
- 10164367This Service Bulletin addresses structural preparation required before retrofitting a Pintle Hook assembly to any RA Reefer Model Utility Trailer.
- 10144439Utility re-issued the rear impact guard (bumber) requirements when requesting a replacement bumper and / or DOT decal.
- 10129960Utility released a bulletin outlining reefer and dry van rub rail parts required and installation instructions.
- 10117900This Bulletin was originally released on March 30, 2009. Utility re-released on August 18, 2017 to reflect the addition of the UTM Plant in Mexico.
Every Utility 3000R Multi-Temp model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.