2013 Victory Judge
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Victory › Judge › 2013
These records cover every 2013 Victory Judge. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2013 Victory Judge. Newest first.
Polaris is recalling certain model year 2012-2013 Victory motorcycles manufactured from January 3, 2012, through August 15, 2012. A torqueing procedure may have been missed on some throttle cable retention nuts. On certain motorcycles, the throttle cable retention nuts for either the pull or push throttle cable may have not been torqued correctly.
Risk and remedy
Risk
If the torqueing is missed and the retention nuts are loose, the retention nuts closest to the throttle body can become dislodged and interfere with the throttle function, increasing the risk of a crash.
Remedy
Victory will notify owners and dealers will correctly torque the fasteners free of charge. The safety recall began on October 4, 2012. Owners may contact Victory consumer service department by calling 1-888-704-5290.
Owner complaints
2 complaints
What owners report most
Latest complaints
- Vehicle speed control
"Rapid decelerating while riding on the interstate" ( first issue). on the morning of december 3RD, 2018 I got on interstate 14 traveling south. after approximately 30 minutes of riding the bike, I noticed that my speed had decelerated from 60 mph to 40 mph. I quickly changed into the…
"Rapid decelerating while riding on the interstate" ( first issue). on the morning of december 3RD, 2018 I got on interstate 14 traveling south. after approximately 30 minutes of riding the bike, I noticed that my speed had decelerated from 60 mph to 40 mph. I quickly changed into the first lane of traffic to avoid a rear collision when all of a sudden the bike decelerated to 20 mph. I suddenly began to panic so I quickly and safely moved over to the shoulder. I let the bike idle for a few minutes and safely merged into the first lane of the interstate. I rode the motorcycle safely back home and emptied the fuel tank. Thinking that it might be a fuel issue, I filled the tank with new fuel. (second issue). on the morning of december 28TH, 2018. I went for another ride via sierra highway south. after riding the bike for approximately 45 minutes, the bike again began to decelerate from 60 mph to 30 mph. Knowing that this happened again I safely pulled over to the shoulder and allowed the bike to idle for 10 minutes. for safety reasons I called a tow truck and had the bike towed to my residence. I have owned many other motorcycles in the past (kawasaki, yamaha, honda, suzuki) and this has never happened. in my 30 years of experience riding motorcycles I have never had this issue. I do not have confidence in riding this motorcycle again until polaris can restore my faith and provide a root cause too both of these unsafe occurrences. I have recently contacted polaris requesting if there has been any recalls or systemic issues regarding this year, make & model or other similar models. However, I have researched on the internet other models of victory motorcycles and discovered similar power stalls and deceleration issues. respectfully submitted, [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6).' *pm
- Structure › Body · Unknown or other · Wheels
The 5 bolts that connect the belt pulley to the rear wheel sheared off completely. I was driving down a city street. I had just taken off from a stop light, shifted from 3RD to 4TH gear and nothing happened. The bike would not grab and go forward. I tried to shift down and give gas again and…
The 5 bolts that connect the belt pulley to the rear wheel sheared off completely. I was driving down a city street. I had just taken off from a stop light, shifted from 3RD to 4TH gear and nothing happened. The bike would not grab and go forward. I tried to shift down and give gas again and nothing. I was going between 40-50mph. Luckily I was able to coast to the shoulder of the road unharmed. I got off my bike and began to inspect it when I saw a large bolt on the ground. I picked it up and realized it was hot so it must have come off my bike. A fellow motorcycle rider pulled over to make sure I was ok and helped me determine where the bolts came from and why I could not get my bike into gear. This IS when I realized they were all gone. The rear wheel, pulley and swing arm where damaged in the process. this causes a catastrophic failure in the entire drive system of the motorcycle. There IS a known issue with the powder coating on the pulley causing this to happen however victory has taken no steps to fix this issue. Luckily for me I did not wreck or die due to this issue. However I have talked with over 20 people on a forum that have had the same exact catastrophic failure to their bikes. It IS not limited to one model or year. Victory IS taking no responsibility in this issue and the cost IS falling to the consumer. Must need to be able to prove someone has died before they will take action.
Every Victory Judge model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.