1994 White GMC Acl
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › White GMC › Acl › 1994
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 1994 White GMC Acl. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
5 recalls name the 1994 White GMC Acl. Newest first.
Vehicle description: class 8 heavy duty trucks. the air suspension control valve supply line was not plumbed through an air pressure protection valve. in the event of a failure, there would be loss of air pressure in the 'b' system air reservoir that supplies air pressure for the front steer axle brakes.
This condition would result in increased stopping distances.
Dealers will install the necessary air pressure protection valve.
The traction solenoid exhaust can be obstructed due to inadequate drainage and a build-up of road contamination between the mounting bracket and the solenoid housing. The obstructed exhaust prevents the relay valve control air pressure from venting after a differential braking traction event.
This condition would keep the rear axle service brakes applied without any brake pedal movement by the driver increasing the risk of a vehicle accident.
Dealers will remove the suspect valve and install a new valve that has a modified solenoid housing which will allow for sufficient drainage and a new valve mounting bracket with increased height to reduce entry of contamination.
Undercoating applied to the inside of the cab shell squeezed out during assembly onto the brake pedal plunger.
Undercoating on the plunger may cause the plunger to stick resulting in increased brake pedal effort and/or slow release of the brakes increasing the potential for a vehicle accident.
Dealers will clean the undercoating from the brake pedal plunger assembly, lubricate and reinstall the brake pedal plunger assembly.
Air system blockage in the air dryer occurs degrading the moisture removing capabilities of the dryer when the vehicle IS operated in a cold environment and moisture accumulates and freezes in the air dryer or in the line between the dryer and the air system reservoir. The air dryer can become overpressurized causing the air dryer cartridge to separate…
If the air dryer separates from the base, the cartridgecan separate sufficiently enough to cause personal injury or property damage.
Dealers will equip air systems with a pressure relief valve to be located between the compressor and the air dryer. This pressure relief valve IS intended to vent if excessive pressure develops in the air dryer.
The main electrical power harness was misrouted. If there was an electrical short in this harness, the circuit would not be fuse-protected.
A short in a misrouted power harness can create a potential for a vehicle fire.
Dealers will reroute the subject power harness and reconnect the affected wires to the correct fuse-protected power junction.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.