2011 Audi D4

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10157124This bulletin provides information regarding vibrations or movement that are felt in the wheel.
• 10157111This informational bulletin contains instructions for setting up and using the SD creator program.
• 10155660This bulletin provides information regarding vibrations or movement that are felt in the wheel.
• 10155644This special notice is to inform dealers to return all part numbers listed in the document and order the superseded part numbers going forward.
• 10130183This bulletin applies to any repair that requires replacement of the air conditioning compressor and details how to run a ODIS GFF test plan.
• 10128350This informational bulletin contains all the the Audi Oil Quality Standards that should be used when doing an oil change.
• 10128346This technical service bulletin provides guidelines for diagnosing the clutch plate.
• 10128340This bulletin provides information regarding vibrations or movement that are felt in the wheel.
• 10128222Due to increasing requests for high voltage personal protective equipment (HVE PPE) for dealer technicians working with high voltage vehicles (Hybrid, Plugin Hybrid, Electric Vehicle), the Volkswagen Tools and Equipment Team has identified two US based suppliers to support dealers in USA and Canada.
• 10128010This bulletin provides information regarding vibrations or movement that are felt in the wheel.
• 10128009This information TSB provides information regarding the correct way to torque adjust a wheel bolt.
• 10127992This technical bulletin provides instructions for an an error message and updating with an SVM code.
• 10127949This informational bulletin contains resource information for when the traffic feature is inoperative in the MMI navigation.
• 10127905This special notice is to inform dealers to return all tail lamps with the part number listed that are below generation 14s.
• 10127860This informational bulletin contains knowledge on why oil may appear on one or several of the shock absorbers.
• 10127856This informational bulletin contains technical information for when there is condensation visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, and/or third brake light lens.
• 10127840This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
• 10123792This document contains the important email to all Audi dealership personnel in regards to the immediate madatory stop-sale order that is in effect to all vehicles from 20110-2015 that have a 2.0L TDI engine.
• 10123558Supersedes Technical Service Bulletin Group 96 number 12-32 dated April 27, 2012. The customer is able to program one or more of the Homelink buttons using their garage door remote, but after a few days or weeks, one or more of the programmed Homelink buttons no longer function. The LED on the Homelink button that is no longer functioning now flashes slowly, indicating that no programming is stored. The customer?s transmitter operates at 295Mhz. At the workshop, the Homelink system can be programmed to the workshop garage door successfully. No trouble is found. No DTCs are stored in any control units. The garage door opener control module, J530, was designed with an operational frequency range in which the 295Mhz frequency works correctly during the initial programming of the system. Over time, the transmitting frequency can drift out of range (especially in warmer climates), causing the system to lose its programming.
• 10122795complaints are reported by the customer regarding electrical features and functions in the vehicle. One or more warning lights on in cluster. The DIS or other displays in cluster are blank. MMI does not function. Windows do not function. LED indicators in various buttons inside the vehicle do not light up. The voltage regulator on the alternator can sporadically fail causing the electrical system to experience too high of voltage. As a result, the affected vehicle electronic components go in to high voltage protection and deactivate sensitive displays and indicators to prevent electrical damage. When an over voltage condition occurs the vehicle electronics and alternator are protected, thus there is no need to replace the entire alternator assembly.
• 10122794Supersedes Technical Service Bulletin Group 27 number 12-14 dated October 12, 2012. Complaints are reported by the customer regarding electrical features and functions in the vehicle. One or more warning lights on in cluster. The DIS or other displays in cluster are blank. MMI does not function. Windows do not function. LED indicators in various buttons inside the vehicle do not light up. The voltage regulator on the alternator can sporadically fail causing the electrical system to experience too high of voltage. As a result, the affected vehicle electronic components go in to high voltage protection and deactivate sensitive displays and indicators to prevent electrical damage. When an over voltage condition occurs the vehicle electronics and alternator are protected, thus there is no need to replace the entire alternator assembly.
• 10121316Supersedes Technical Service Bulletin Group 69 number 12-25 dated April 25, 2012. After the airbag control module (J234) has been replaced, the control unit cannot be coded via SVM spec/actual. An SVM code is required to code and parameterize the new service replacement airbag control module. Each model?s SVM code is provided in a parts bulletin (GP bulletin), which should have been referenced through ETKA when the module was replaced. The control module cannot be coded until the SVM code has been executed.
• 10120015This document contains general information on the upcoming warranty extension on the high pressure fuel pump.
• 10063869Summary to be provided on a future date.
• 10063855Summary to be provided on a future date.
• 10063852Summary to be provided on a future date.
• 10063834Summary to be provided on a future date.
• 10058584Audi: engine, on some vehicles, would run irregularly or have malfunction indicator lamp (mil) on or possible filter element for camshaft adjustment valve can loosen and in oil circuit, there IS no damage from loosened particles. Model all. All years.
• 10058018Audi: some audi vehicles with 2.0 tfsi engines will have the warranty extended for the intake solenoid. 7/23/15
• 10058017Audi: some 2011-2012 audi vehicles with 2.0 tfsi engines will have the warranty extended for intake manifold and fuel injectors. 7/23/15
• 10058016Audi: all audi 2011-2012 model year with an 2.0 tfsi engine will be extending the warranty on all fuel injectors. 7/23/15
• 10056163Audi: see document search button for owner letter. Warranty extension for emissions control systems warranty for fuel injector replacement, has been issued, under specific conditions, 10 years or 120,000 miles, whichever first occurs. Model 2011.
• 10056162Audi: see document search button for owner letter. A warranty extension has been issued for 10 yrs or 120, 000 miles, whichever occur first, on emissions control systems warranty for intake manifold and fuel injectors, under specific conditions. Model 2008-2011.
• 10056161Audi: see document search button for owner letter. Under specific conditions, the emissions control systems warranty, for fuel injector replacement, has been extended to 10 yrs or 120,000 miles, whichever happens first. Model 2009-2011.
• 10054859Audi: on certain vehicles, use calibrated torque wrench and not torque sticks, torque extension bars and impact guns/wrenches not approved for usage on wheel bolts by manufacturer, that can cause damage to brake, steering wheel, hub. Model 1995-2014 all.
• 10053944Audi: see document search button for owner letter. Information provided regarding warranty extension on carbon buildup removal, engine cylinder head secondary air ports. Models 2009-2012. No model provided.
• 10052307Audi: some vehicles may lack power or will not move after stop due to simultaneously depressing the brake and accelerator pedals.
• 10044397Audi: when selecting reverse gear, the picture of rearview camera fails to appear, sporadically. Certain models, camera image can be re=activated. Model years 2008-2013.

Every Audi D4 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.