2013 Audi D4

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10157125This technical service bulletin provides troubleshooting for brake noise.
• 10157124This bulletin provides information regarding vibrations or movement that are felt in the wheel.
• 10157111This informational bulletin contains instructions for setting up and using the SD creator program.
• 10155670This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
• 10155661This technical service bulletin provides troubleshooting for brake noise.
• 10155660This bulletin provides information regarding vibrations or movement that are felt in the wheel.
• 10155644This special notice is to inform dealers to return all part numbers listed in the document and order the superseded part numbers going forward.
• 10153071This bulletin contains instructions for vehicle inspection, protection removal, and detailing.
• 10130183This bulletin applies to any repair that requires replacement of the air conditioning compressor and details how to run a ODIS GFF test plan.
• 10128350This informational bulletin contains all the the Audi Oil Quality Standards that should be used when doing an oil change.
• 10128346This technical service bulletin provides guidelines for diagnosing the clutch plate.
• 10128340This bulletin provides information regarding vibrations or movement that are felt in the wheel.
• 10128222Due to increasing requests for high voltage personal protective equipment (HVE PPE) for dealer technicians working with high voltage vehicles (Hybrid, Plugin Hybrid, Electric Vehicle), the Volkswagen Tools and Equipment Team has identified two US based suppliers to support dealers in USA and Canada.
• 10128027This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
• 10128026This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
• 10128010This bulletin provides information regarding vibrations or movement that are felt in the wheel.
• 10128009This information TSB provides information regarding the correct way to torque adjust a wheel bolt.
• 10127992This technical bulletin provides instructions for an an error message and updating with an SVM code.
• 10127949This informational bulletin contains resource information for when the traffic feature is inoperative in the MMI navigation.
• 10127905This special notice is to inform dealers to return all tail lamps with the part number listed that are below generation 14s.
• 10127860This informational bulletin contains knowledge on why oil may appear on one or several of the shock absorbers.
• 10127856This informational bulletin contains technical information for when there is condensation visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, and/or third brake light lens.
• 10127840This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
• 10127818This informational bulletin contains guidelines for figuring out why coolant marks are present around the coolant expansion tank cap.
• 10127752This informational bulletin contains instructions for proper brake maintenance.
• 10123792This document contains the important email to all Audi dealership personnel in regards to the immediate madatory stop-sale order that is in effect to all vehicles from 20110-2015 that have a 2.0L TDI engine.
• 10123558Supersedes Technical Service Bulletin Group 96 number 12-32 dated April 27, 2012. The customer is able to program one or more of the Homelink buttons using their garage door remote, but after a few days or weeks, one or more of the programmed Homelink buttons no longer function. The LED on the Homelink button that is no longer functioning now flashes slowly, indicating that no programming is stored. The customer?s transmitter operates at 295Mhz. At the workshop, the Homelink system can be programmed to the workshop garage door successfully. No trouble is found. No DTCs are stored in any control units. The garage door opener control module, J530, was designed with an operational frequency range in which the 295Mhz frequency works correctly during the initial programming of the system. Over time, the transmitting frequency can drift out of range (especially in warmer climates), causing the system to lose its programming.
• 10123548Audi is committed to enhancing the Initial Quality Experience for our Customers within the first days of vehicle ownership. We want to resolve any knowledge or technical concerns a customer may have about a new vehicle, and build a strong, positive, enduring relationship between dealer and customer. To support this commitment to both our dealers and our customers, Audi is introducing the Audi Second Delivery Program for MY2013 and MY2014 vehicles. The Program is applicable to all new MY2013 and MY2014 vehicles and includes a one-time reimbursement per VIN of $75. The Second Delivery may be performed at the dealership or a location of the customer?s choosing.
• 10121316Supersedes Technical Service Bulletin Group 69 number 12-25 dated April 25, 2012. After the airbag control module (J234) has been replaced, the control unit cannot be coded via SVM spec/actual. An SVM code is required to code and parameterize the new service replacement airbag control module. Each model?s SVM code is provided in a parts bulletin (GP bulletin), which should have been referenced through ETKA when the module was replaced. The control module cannot be coded until the SVM code has been executed.
• 10118415This informational bulletin contains guidelines for figuring out why coolant marks are present around the coolant expansion tank cap.
• 10118303The MIL is sporadically on. One or more of the following DTCs is stored in the engine control module (ECM, J623 (address word 01). They are DTC P261A00 (Coolant Pump ?B? Control Circuit/Open), DTC P261B00 (Coolant Pump ?B? Control Circuit Range/Performance), and DTC P261C00 (Coolant Pump ?B? Control Circuit Low). The continued coolant circulation pump sporadically fails.
• 10118066This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
• 10063833Summary to be provided on a future date.
• 10058584Audi: engine, on some vehicles, would run irregularly or have malfunction indicator lamp (mil) on or possible filter element for camshaft adjustment valve can loosen and in oil circuit, there IS no damage from loosened particles. Model all. All years.
• 10054859Audi: on certain vehicles, use calibrated torque wrench and not torque sticks, torque extension bars and impact guns/wrenches not approved for usage on wheel bolts by manufacturer, that can cause damage to brake, steering wheel, hub. Model 1995-2014 all.
• 10053944Audi: see document search button for owner letter. Information provided regarding warranty extension on carbon buildup removal, engine cylinder head secondary air ports. Models 2009-2012. No model provided.
• 10052307Audi: some vehicles may lack power or will not move after stop due to simultaneously depressing the brake and accelerator pedals.
• 10047800Audi: brake light lens, daytime running lights, fog lights, side marker lights, headlights, taillights, front turn signals would all have visible condensation inside due dampness, from cold lens, settling inside. Models 1996-2013 - all model.
• 10044397Audi: when selecting reverse gear, the picture of rearview camera fails to appear, sporadically. Certain models, camera image can be re=activated. Model years 2008-2013.

Every Audi D4 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.