2008 BMW 135I
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2008 BMW 135I. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2008 BMW 135I. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2012 BMW 128i, 135i, 135is Coupes and 128i, 135i Convertible vehicles. The wiring and electrical connectors in the blower-regulator wiring harness may overheat.
Risk and remedy
Risk
Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.
Remedy
BMW will notify owners, and dealers will inspect the blower-regulator wiring harness, and replace it with a new part, free of charge. The recall began October 4, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall is an expansion of an earlier recall number 17V-676.
BMW of North America, LLC (BMW) is recalling certain model year 2008-2013 128i and 135i coupes and convertibles and 1 Series M coupes, 2006-2011 325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi, 335i, 335xi, 335i xDrive Sedans, 2009-2011 335d sedans, 2006-2012 325xiT, 328i and 328xi sports wagons, 2007-2013 328i, 328xi, 328i xDrive, 335i, 335xi, 335i…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
BMW will notify owners, and dealers will replace the driver's frontal air bag module or inflator depending on the vehicle model, free of charge. The recall began March 9, 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW is recalling certain model year 2008-2012 1-Series coupes and convertibles manufactured December 2007 through September 2011; and 2007-2011 3-Series coupes and convertibles manufactured March 2007 through October 2011; 2007-2011 3-Series sedans manufactured March 2007 through October 2011; 2007-2011 3-Series sports wagons manufactured March 2007 through…
Risk and remedy
Risk
If there is a loss of electrical power to the vehicle, the vehicle may unexpectedly stall, increasing the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the positive battery cable connector and secure it with an improved method, free of charge. The recall began on March 13, 2013. Owners may call BMW at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Owner complaints
51 complaints3 involved a crash2 involved a fire2 injuries
What owners report most
Latest complaints
- Suspension
When the car was in a local Tire Discounters for an unrelated repair the mechanics noted that the rear subframe had significant degradation and the car was unsafe to operate without immediate replacement of the entire subfrane - at a cost of roughly $5,000. I know there have been subframe recalls…
When the car was in a local Tire Discounters for an unrelated repair the mechanics noted that the rear subframe had significant degradation and the car was unsafe to operate without immediate replacement of the entire subfrane - at a cost of roughly $5,000. I know there have been subframe recalls of BMWs in the past. While this vehicle was not part of those recalls its obviously been an area of concern with this auto maker.
- Exterior lighting · Service brakes · Structure › Body
Center High Mounted Stop Lamp, (CHMSL), lense breaks/detaches repeatedly.
- Engine
The owns a 2008 BMW 135I. The contact stated that while driving at various speeds, the vehicle failed to properly accelerate while depressing the accelerator pedal. On several occasions the check engine warning light illuminated, and the vehicle went into LIMP Mode and decelerated to approximately…
The owns a 2008 BMW 135I. The contact stated that while driving at various speeds, the vehicle failed to properly accelerate while depressing the accelerator pedal. On several occasions the check engine warning light illuminated, and the vehicle went into LIMP Mode and decelerated to approximately 35 MPH. The contact performed a diagnostic test on the vehicle and determined that the fuel injectors were faulty and needed to be replaced. The vehicle was not yet repaired. The manufacturer and local dealer were notified of the failure. The failure mileage was 100,000.
- Air bags · Air bags › Sensor › Occupant classification
The contact owns a 2008 BMW 135I. The contact stated while starting the vehicle, the air bag warning light was illuminated. The contact took the vehicle to the local dealer, where it was diagnosed with needing the passenger occupancy sensor mat to be replaced. The vehicle was not repaired. Upon…
The contact owns a 2008 BMW 135I. The contact stated while starting the vehicle, the air bag warning light was illuminated. The contact took the vehicle to the local dealer, where it was diagnosed with needing the passenger occupancy sensor mat to be replaced. The vehicle was not repaired. Upon investigation, the contact associated the failure with NHTSA Campaign Number: 17V428000 (Air Bags) however, the VIN was not included. The manufacturer had not been informed of the failure. The failure mileage was 39,850.
- Air bags
My vehicle IS a low mileage (36K) well maintained car. My local dealer replaced the driver air bag under a recall june 29, 2020. Shortly after within 250 miles/2 months a srs/air bag system fault/warning started happening. It was diagnosed as a faulty pass occupancy sensor that they want $3600 to…
My vehicle IS a low mileage (36K) well maintained car. My local dealer replaced the driver air bag under a recall june 29, 2020. Shortly after within 250 miles/2 months a srs/air bag system fault/warning started happening. It was diagnosed as a faulty pass occupancy sensor that they want $3600 to replace. Unfair, there have been several pass occupancy sensor recalls for other models of the same vintage (2006-2008). this should be covered under the 15 yr extended limited warranty offered to other BMW model owners.
- Engine · Power train · Unknown or other
Missing
- Electrical system
An electrical fire ignited under the passenger seat and passenger floorboard. Flames came out from under the passenger seat and floorboard. The driver sustained 3RD degree burns and was taken to the hospital skin grafts. The car was moving at the time of the fire.
- Fuel/propulsion system
My car suddenly lost acceleration while I was driving on a freeway then the engine died.
- Electrical system · Exterior lighting
The plastic insulation on the headlight wiring has flaked off leaving the wires completely bare in some places. This has resulted in the loss of a drl, headlight ballast, and adaptive headlight motor. This IS a well documented issue online, from BMW owners of multiple years/series. In fact, there…
The plastic insulation on the headlight wiring has flaked off leaving the wires completely bare in some places. This has resulted in the loss of a drl, headlight ballast, and adaptive headlight motor. This IS a well documented issue online, from BMW owners of multiple years/series. In fact, there IS already an nhtsa complaint on the exact same year and model as I have. this issue IS dangerous in multiple ways. The loss of lighting at night could result in an accident, harming both the occupants and people nearby. The highly charged bare wiring could short, spark, and cause a fire. The continued destruction of headlight bulbs, motors, etc IS harmful to the consumers and economy as those parts can be very expensive.
- Electrical system
2008 BMW 135I and my blower motor stopped working as I was driving a few moment later and I started to hear spark and smelt burning wires so I immediately thought of the safety recall that IS being done on the 3 series bmw's I instantly turned off the climate control and fan speed and shut the car…
2008 BMW 135I and my blower motor stopped working as I was driving a few moment later and I started to hear spark and smelt burning wires so I immediately thought of the safety recall that IS being done on the 3 series bmw's I instantly turned off the climate control and fan speed and shut the car off I looked over and saw a little bit of smoke coming from under the passenger side so I went into the trunk and took the negative cable off the battery I then waited a few seconds and then took the kick plate off the passenger side to take a look at the blower motor and I find burnt broken wires coming from the part of the harness that connects into the blower motor I instantly unplugged it and tape it up with electrical tape once done I proceeded to call up my nearest BMW dealership and after explaining to them what happened they told me that there was nothing I could do but pay out of pocket to get it fixed because my car wasn't covered under recall so I hung up the phone and call BMW of USA headquarters and spoke to some guy that proceeded to tell me the same thing the dealership told me and that I would have to get a diagnosis done to prove it was the same issue that has happened on the 3 series even tho it's the same part numbers and same symptoms. I asked him if I went there and proved that it was the same issue would I be covered and he proceeded to tell me no that a recall IS based off of statistics and that even if my car went on fire like a lot of the 3 series did that there IS still nothing I could do because my car wasn't on the recall list.
- Air bags
TL* the contact owns a 2008 BMW I35I. The contact stated that while at a stop light, another vehicle crashed into the rear end of the vehicle and the air bags failed to deploy. The contact sustained knee and shoulder injuries that required medical attention. A police report was not filed. The…
TL* the contact owns a 2008 BMW I35I. The contact stated that while at a stop light, another vehicle crashed into the rear end of the vehicle and the air bags failed to deploy. The contact sustained knee and shoulder injuries that required medical attention. A police report was not filed. The vehicle was drivable. The vehicle was taken to an independent mechanic where it was repaired of the accident damage, then later was taken to momentum BMW dealer, located on 10002 southwest fwy, houston, tx 77074, phone: (855) 645-6452, where the vehicle was diagnosed of a faulty air bag and needed to be replaced. The vehicle was repaired. The manufacturer was not contacted and made aware of the failure. The approximate failure mileage was 48,000. The vin was not available.
- Air bags
TL* takata recall. The contact owns a 2008 BMW 135I. The contact received notification of nhtsa campaign number: 16v071000 (air bags). The part to do the recall repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The local…
TL* takata recall. The contact owns a 2008 BMW 135I. The contact received notification of nhtsa campaign number: 16v071000 (air bags). The part to do the recall repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The local dealer (BMW of alexandria, 499 s. Pickett street, alexandria, va 22304) was contacted and confirmed that the parts were not available for the recall remedy. The manufacturer was made aware of the issue and was not able to confirm when the parts were to become available. The contact had not experienced a failure. Parts distribution disconnect.
- Air bags
Takata recall. Disable & enable air bag system 2 scan srs, drivers side during accident part type 72 12 6 981 121
- Fuel/propulsion system
Cars' idle has been fluctuating for a couple of weeks at idle. Vehicles fuel pump has been replaced 2 times already through out it's life. Last week (july 13,2017) car died in the middle of the road and I had towed into the dealership that same morning. Dealer refuses to take any initiative to fix…
Cars' idle has been fluctuating for a couple of weeks at idle. Vehicles fuel pump has been replaced 2 times already through out it's life. Last week (july 13,2017) car died in the middle of the road and I had towed into the dealership that same morning. Dealer refuses to take any initiative to fix the problem at all. I have software where it shows that the cars vehicles high pressure fuel pump IS failing. Car IS throwing codes too. Car was in motion when fuel pump died on me in a city street.
- Air bags · Seat belts
Seat belts/airbag lights keep coming on. They have replaced the harness in the seat, belt buckle, reset the light and now they say the seat belt module now has to be fixed. I believe this IS from the recall that has not been done on the car which IS the airbag module. the light came on when you sat in the seat or just driving along
- Air bags
TL* the contact owns a 2008 BMW 135I. The contact received notification of nhtsa campaign number: 16v071000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Air bags
BMW issued a recall notification in march 2016 for driver's front air bag module. As of may 15, 2017, 14 months later, BMW dealer reports no parts have been made available to any dealers in north america to be able to make the repair, and no information on when parts are expected to be available.
- Fuel/propulsion system
My high pressure fuel pump IS dying ...ive had the low pressure fuel pump changed and I'm still experiencing a rough cold start and half block engine light symbol ...car has a idle problem at start come and go and now I can only fill a half tank of gas ...
- Air bags
Takata recall. I received notification from BMW in march 2016 concerning the need to replace the driver's side airbag on our car. to date, I have not heard from BMW. I recently sent an email to their customer relations. I have not heard back from them. I think that nearly a year to replace this airbag IS unreasonable.
- Air bags
Takata recall notified by BMW in march 2016 but still not repaired.
- Air bags
TL* takata recall. The contact owns a 2008 BMW 135I. The contact received notification of nhtsa campaign number: 16v071000 (air bags) however, the part for the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The contact…
TL* takata recall. The contact owns a 2008 BMW 135I. The contact received notification of nhtsa campaign number: 16v071000 (air bags) however, the part for the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. The manufacturer was not made aware of the issue. Vin tool confirms parts not available. updated 09/08/16*lj updated 09/28/16.*jb
- Air bags
Takata recall BMW has stonewalled me! They say I can have a loaner. Wonderful, except it's not a BMW since all late model bmws have been recalled. I can't sell my car because no one would want it pending a recall that has not been addressed by BMW or takata. when I inquired about the…
Takata recall BMW has stonewalled me! They say I can have a loaner. Wonderful, except it's not a BMW since all late model bmws have been recalled. I can't sell my car because no one would want it pending a recall that has not been addressed by BMW or takata. when I inquired about the recall loaner agreement, I was told I would need to sign an agreement for a 2-3 year rental and not drive my car except for a weekly startup and back and forth in the driveway to be sure the battery was good. I am now looking into a class action suit. I have several friends with more recent models subject to this recall and they are hopping mad and ready to go to court. it IS completely unacceptable that neither company, BMW and takata, have owned up and shown what they will do about it. Instead, all we customers hear IS "yes, it's a terrible situation, but there IS nothing we can do but offer you the loaner." well, there IS something we owners can do. We are a litigious bunch!!
- Exterior lighting
After hitting road pothole adaptive headlight warning light on dash illuminated. Placement of complete headlamp assembly quoted at over $2100 plus tax. Dealer repaired headlamp mechanism more than once for about $700 each time but problem with water intrusion resulting in adaptive headlamp warning…
After hitting road pothole adaptive headlight warning light on dash illuminated. Placement of complete headlamp assembly quoted at over $2100 plus tax. Dealer repaired headlamp mechanism more than once for about $700 each time but problem with water intrusion resulting in adaptive headlamp warning light occurred after car went through automated car wash (each time after repair it only took one wash to set off the warning). Mechanism clearly IS affected by water intrusion. Good thing IS headlamp still works and car runs fine. Bad thing IS that proper repair IS exorbitant and adaptive headlamp warning lamp IS blocking other key display information -- time, temperature, radio station info, status of bluetooth. Very annoying and dealer says there's nothing that can be done without repairing the headlight. I feel like I am almost being forced to make the repair simply to restore vehicle dashboard information. Again, headlamp works, just not the adaptive mechanism. I wanted error "coded out" but dealer refused saying it must be repaired.
- Air bags · Seat belts
Air bag light was on all the time. Possible loose contact pin tension for left side airbag circuit. Drivers seat airbag contacts on wiring harness side had to be replaced.
- Wheels
The rear right wheel was cracked at 5 places around the circumference and lost tire pressure, discovered by costco tire center in everett washington when brought it in, in august 2014, thinking that the tire got a nail. BMW seattle declined to cover the tire by warranty stating that I bought in…
The rear right wheel was cracked at 5 places around the circumference and lost tire pressure, discovered by costco tire center in everett washington when brought it in, in august 2014, thinking that the tire got a nail. BMW seattle declined to cover the tire by warranty stating that I bought in 2009 and it IS above 5 years so no warranty on it, I had to buy the after market set of rims (vmr model 701) that does not fit totally with the car and would like to revert to use the original set with a replaced rear right rim. I took pictures and sent in 2 days ago to BMW as the set of rims I bought for the car do not really fit. the original cracked rim has a manufacturing defect as shown in my photos taken from inside the rim looking out: the aluminum material show a riddle irregularity at several places. BMW calls me today to re-iterate the refusal for the rim replacement.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10199287CLASS ACTION SETTLEMENT: N54/N54T/N55 ELECTRIC ENGINE COOLANT PUMP . With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered a nationwide settlement with the plaintiffs in the following class action: Oliver, et al v. BMW NA, et al
- 10198894CLASS ACTION SETTLEMENT: N54/N54T/N55 ELECTRIC ENGINE COOLANT PUMP . With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered a nationwide settlement with the plaintiffs in the following class action: Oliver, et al v. BMW NA, et al
- 10194296Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.
- 10182619Discharged Battery Energy Diagnosis Must Be Performed: The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle "discharged battery" complaints. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion, with all results taken into consideration. Without performing the energy diagnosis test plan, the root cause of the discharged battery cannot be identified. This increases the chances of a repeat repair.
- 10181214Power Reduction, FC2A82 Intake VANOS and/or FC2A87 Exhaust VANOS Camshaft Fault: The ?Service Engine Soon? (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If theignition is cycled, the engine then usually performs normally.
- 10175267Power Reduction FC2A82 Intake VANOS and/or FC2 A87 Exhaust VANOS Camshaft Fault: The "Service Engine Soon" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled the engine then usually performs normally.
- 10162434Service Action: CIC - Install Navigation Road Map Database 2013. Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).
- 10162431"Erroneous CC Message "Remote control! Do not switch off the engine" is Displayed. An erroneous CC message, "Remote control!" " Do not switch off the engine" is displayed in the Central Information Display (CID). The engine can still be started, even with the CC message displayed. CAUSE: Car Access System (CAS) software error"
- 10162427Convertible Top Does Not Open Properly. When opening the convertible top, the interior cover flap remains open. CAUSE: The cable for the flap operation is either kinked or dislodged.
- 10162416"Power Reduction, FC 2A82 Intake VANOS and/or FC 2A87 Exhaust VANOS Camshaft Faults are Stored in DME. The ""Service Engine Soon"" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled, the engine then usually performs normally. The following faults are stored in the DME: * 2A82 VANOS intake - stiff; jammed mechanically * 2A87 VANOS exhaust - stiff; jammed mechanically * 130108 VANOS intake: control fault, position not reached * 130308 VANOS exhaust: control fault, position not reached For the N54 engine, the following secondary faults may also be stored: * 120408 Charge-air pressure control, cut-out: Boost pressure accumulation blocked * 3100 Boost-pressure control, deactivation - boost-pressure buildup prohibited CAUSE The VANOS faults can be caused by an insufficient oil pressure supply to the inlet VANOS adjustment unit. To effectively move the camshafts to the target positions in the specified time and under all engine conditions, sufficient oil pressure supply to the VANOS control pistons must always be available. If engine operation requires the VANOS system to quickly advance or retard the intake or exhaust camshaft, faults may be stored if the camshaft is ""late"", or does not reach the target position. In this situation, engine power may be reduced and a check control message is displayed. The consequential fault 3100 or 120408 can also be set in the DME fault memory as well."
- 10162405Wear Marks on the C-pillar Area of the Soft Top Canvas. Wear marks may form on the soft top cover in the C-pillar area, above or below the canvas seam and or along the seam. These wear marks may be visible on one or both sides and are generally less than 4mm in diameter. They are first visible as a smooth spot on the cover, and progress to a white mark. In severe cases, a hole could form in the cover material. 1. Improper limit spacing between the soft top cover and the soft top frame when folded in the fully open position 2. The seal carrier contacting and wearing the canvas top cover and threads 3. Tension straps and main bump stops out of adjustment.
- 10162404"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Follow the diagnosis test plan using the latest ISTA version. In Information Search, select the "Function Structure"" tab. Select Body, Mirror, Door mirror, Driver's or passenger side, Exterior Mirror Malfunction, and then press "Start Search". Select test plan ""AM5102_00010".
- 10162395N55 Engine: Various Faults Stored in DME Related to VANOS and Camshaft Position. A rattling noise can be heard from the engine compartment; the engine has a loss of power; and the Service Engine Soon lamp is illuminated. One or more of the following faults may be stored. E70, E71, E82, E88, E90, E92 and E93: 2D5A - VANOS, intake: control fault, camshaft sticking 2D5B - VANOS, intake: control fault, position not reached 2D60 - VANOS, exhaust: control fault, camshaft sticking 2D61 - VANOS, exhaust: control fault, position not reached 2D9F - camshaft input sensor: signal implausible 2DA1 - Camshaft exhaust sensor: signal implausible 300C - Camshaft input sensor: signal high 300D - Camshaft input sensor: signal low 300E - Camshaft exhaust sensor: signal high 300F - Camshaft exhaust sensor: signal low F07, F10, F12, F13 and F25: 130104 - VANOS, intake: control fault, camshaft sticking 130108 - VANOS, intake: control fault, position not reached 130304 - VANOS, exhaust: control fault, camshaft sticking 130308 - VANOS, exhaust: control fault, position not reached 130E11 - Camshaft input sensor: signal implausible 130F11 - Camshaft exhaust sensor: signal implausible 164020 - Camshaft input sensor: signal high 164021 - Camshaft input sensor: signal low 164030 - Camshaft exhaust sensor: signal high 164031 - Camshaft exhaust sensor: signal low CAUSE One or both (intake and/or exhaust) of the VANOS gear assemblies have failed; the attaching bolts may have also loosened and/or broken.
- 10160287TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10160244TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10154816In an effort to improve the completion rate on Takata air bag recall affected vehicles; BMW NA has expanded the BMW Ultimate Rewards platform to include a new Recall Support page. This page will allow IRFs to check their customers VINs for open Takata recalls; and get rewarded for helping us with completing repairs.
- 10153726Takata class action settlement. Customer support program. Front driver side airbag modules.
- 10152314Door Open Message Displayed, Even Though Door Is Closed. The customer complains that while driving, a CCM (check control message) indicates the doors are open, even though they are closed. Also, sometimes the gong will sound and the interior lights will go on and off. Unspecified FRM door lock status due to voltage variations
- 10151335Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware.
- 10151170N51 Engine: Service Engine Soon Lamp Illuminated - Loss of Power and Various Faults Stored in the DME. The customer complains that the Service Engine Soon lamp is illuminated. The vehicle has lost power; the engine cranks but will not start; and various faults are stored in the DME for engine misfire and/or mixture adaptations. CAUSE The vehicle has lost fuel system delivery pressure due to a loose or split fuel line inside the fuel tank. The failure is related to an unfavorable stacking of tolerances between the rubber fuel hose and the plastic regulator nipple or deterioration of the rubber hose construction material.
- 10151119SI B84 03 14 February 2016 Communication Systems Technical Service This Service Information bulletin supersedes SI B84 03 14 dated October 2014. SUBJECT Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures CAUSE Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware CORRECTOPM None available at this time. We are currently working with the device manufacturer on a solution.
- 10151115SUBJECT Audio System Speaker Testing. For audio system speaker testing there is a NED (Non Electrical Diagnosis) Test Plan available. CAUSE We previously recommended use of the Audio Test CD (ATC) from BMW. This CD has been discontinued.
- 10151081"PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES THE NEXT TIME THEY ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS. This Service Information bulletin supersedes SI B13 14 10 dated July 2013. SUBJECT Voluntary Emissions Recall Campaign 10E-A02: N54 Inspection and Replacement of Injectors. The piezo injectors may cause misfire faults with erratic engine operation. AFFECTED VEHICLES This Emissions Recall involves E60, E61, E71, E82, E88, E90, E92, and E93 vehicles with N54 engines which were produced from 04/02/2007 through 11/30/2008. In order to determine whether a specific vehicle has had this Emissions Recall Campaign completed or is affected by this Recall Campaign, it will be necessary to utilize the ""Service Menu"" of DCSnet (Dealer Communication System) or the Key Reader. Based on the response of the system, either proceed with the corrective action or take no further action. Copy of the customer letter is attached."
- 10151079SI B13 03 15 February 2016 Fuel Systems Technical Service This Service Information bulletin supersedes SI B13 03 15 dated March 2015 and replaces SI B13 04 13 dated March 2014. SUBJECT N20, N26, N55, N63TU, S63TU and S55 Engines: Bosch Injector ETK Part Number Error. The current version of the ETK incorporates multiple part number errors for the Bosch type injectors. Ordering the injectors by VIN number or manual identification in ETK may result in an incorrect part number.
- 10151068This Service Information bulletin supersedes SI B07 03 14 dated October 2015. Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Fault codes stored in vehicles being serviced are not being diagnosed, leading to repeat repair visits (source- Analysis of FASTA data and repeat repair visit reports). INFORMATION Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) to find their root cause during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
- 10151023Whistling Noise Coming from the Center Vent - A/C is Off . A very high pitched whistling or beeping noise is heard coming from the center vents. The flow of refrigerant through the expansion valve at certain temperature differentials.
- 10150389Service Action: CIC - Install Navigation Road Map Database 2013. The Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).
- 10150385"CCC - ""Please Insert Navigation DVD"" Appears on CID. The navigation map DVD cannot be read or detected. The message ""Please insert navigation DVD"" appears in the CID (Central Information Display). The navigation system is inoperative. This situation may also occur when upgrading to a new navigation map. The old map is recognized but the new one is not. CAUSE Faulty DVD drive; read error due to hardening of the anti-vibration gel on the read head"
- 10150334"Service Action: CIC - Install Navigation Road Map Database 2013. Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD). Note: The INITIAL enabling code ""FSC CIC map, N. America 2013 INITIAL"" is necessary to start the installation process and to activate the road map database."
- 10150330"Discharged Battery: Energy Diagnosis Must Be Performed. The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle ""discharged battery"" complaints. A discharged battery can have various causes, most of which do not concern the battery itself. A failed battery is often the symptom and not the cause. A fully serviceable battery fails when an electrical component causes the battery to discharge; the battery becomes internally damaged and must be replaced. For more information, refer to www.batteryuniversity.com/parttwo-42B.htm For this reason, replacing the battery is not usually a permanent repair. The cause of the discharged battery must be analyzed in order to guarantee a proper repair. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion with all results taken into to consideration. The procedure as outlined below contains information that will guide the technician into properly repairing the vehicle and getting paid for a warranty claim. CAUSE Refer to the ""Procedure"" section of this Service Information for details."
- 10150265Intermittently Stored FM Radio Stations Default to FM 87.7. Intermittently, the stored FM radio stations default to FM 87.7 after vehicle start-up. CAUSE 1. Low battery voltage or voltage drop at the head unit 2. Radio station preset contains FM 87.7 3. Remote key memory not set correctly or the setting is lost
- 10150264"The replacement OC3 seat mat (front passenger seat occupancy) will not enable when following ISTA Repair Instruction REP 65 77 604, ""Replacing sensor mat (OC3 mat) for passenger seat occupancy detector."" 1. When the new mat is installed in the vehicle, too much pre-load pressure will prevent the mat from being enabled. ISTA/P WILL NOT enable the new part, and will cause permanent damage to it. 2. The new part has incorrect coding."
- 10150224"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Complete the diagnosis test plan using the latest ISTA version. The test plan can be accessed via the following path: ""Information Search / Function Structure / Body / Mirror / Exterior mirrors / Driver's or passenger side / Electrochromic Mirror,"" and then press ""Start Search."" Select the test plan ""AM5102_00010."""
- 10150173"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Complete the diagnosis test plan using the latest ISTA version. The test plan can be accessed via the following path: ""Information Search / Function Structure / Body / Mirror / Exterior mirrors / Driver's or passenger side / Exterior Mirror https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/15...12/6/2013 Page 2 of 2 Malfunction,"" and then press ""Start Search."" Select the test plan ""AM5102_00010."""
- 10150133In all audio modes (radio, CD, AUX-In, etc.), the audio output is distorted. It is more noticeable with high bass and high audio volume settings. There may also be an intermittent interference noise coming from the loudspeakers at low audio volume or when the radio is turned off. Audio settings in the RAD2+ (radio professional)
- 10150131"Enabling and Replacing New OC3 Seat Mat. The replacement OC3 seat mat (front passenger seat occupancy) will not enable when following ISTA Repair Instruction REP 65 77 604, ""Replacing sensor mat (OC3 mat) for passenger seat occupancy detector."" When the new mat is installed in the vehicle, too much pre-load pressure will prevent the mat from being enabled. ISTA/P WILL NOT enable the new part, and will cause permanent damage to it."
- 10150130The vehicle position is missing or incorrect on the navigation map. The navigation system integrated in the Car Information Computer (CIC) is not calibrated correctly.
- 10150100The customer may complain that during the cold start in the morning, the engine runs very roughly and the Service Engine Soon lamp is illuminated. Various misfire fault codes (e.g., 29CC, 29D2, 29D1, 29D0, 29C0, 29CF) may be stored in the DME control module. The engine rough running complaint can be reproduced on a cold start in the workshop. During the course of diagnosis, the spark plugs, removed from the misfiring cylinders after the problem was reproduced, are found to be soaked (?wet?) with fuel, while the injector tips are covered with a layer of carbon deposit.
- 10150099N54 Engine: Fuel Pressure Control Test Plan Error. INFORMATION Not applicable.
Every BMW 135I model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.