2012 BMW 135I
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2012 BMW 135I. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2012 BMW 135I. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2012 BMW 128i, 135i, 135is Coupes and 128i, 135i Convertible vehicles. The wiring and electrical connectors in the blower-regulator wiring harness may overheat.
Risk and remedy
Risk
Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.
Remedy
BMW will notify owners, and dealers will inspect the blower-regulator wiring harness, and replace it with a new part, free of charge. The recall began October 4, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall is an expansion of an earlier recall number 17V-676.
BMW of North America, LLC (BMW) is recalling certain 2011-2012 135i Coupe, 1 Series M Coupe and 135i Convertible vehicles, 2011 Z4 sDrive 35i, 335i, 335d, 335i Coupe, 335is Coupe, 335i Convertible, 335is Convertible, 535i, 535i xDrive, 535i Gran Turismo and 550i xDrive Gran Turismo vehicles and 2012 740i and 740Li vehicles. The rear driveshaft constant…
Risk and remedy
Risk
If the CV joint breaks, the vehicle may have a loss of propulsion, increasing the risk of a crash.
Remedy
BMW will notify owners, and dealers will inspect the rear driveshaft CV joint and, based on its production date, will replace it, free of charge. The recall began April 21, 2017. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2008-2013 128i and 135i coupes and convertibles and 1 Series M coupes, 2006-2011 325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi, 335i, 335xi, 335i xDrive Sedans, 2009-2011 335d sedans, 2006-2012 325xiT, 328i and 328xi sports wagons, 2007-2013 328i, 328xi, 328i xDrive, 335i, 335xi, 335i…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
BMW will notify owners, and dealers will replace the driver's frontal air bag module or inflator depending on the vehicle model, free of charge. The recall began March 9, 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2010-2011 128i Coupe, 128i Convertible, 328i Sedan, 328i xDrive Sedan, 328i Coupe, 328i Convertible, 328i Sports Wagon and Z4 sDrive 30i, 2011-2012 135i Coupe, 135i Convertible, 335i Sedan, X5 xDrive 35i, and X6 xDrive 35i, 2011 335i xDrive Sedan, 335i Coupe, 335i Convertible, 528i Sedan, 535i…
Risk and remedy
Risk
If the bolts loosen or break the engine may have reduced power or stall. An engine stall increases the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the four VANOS housing bolts for both VANOS units (intake and exhaust), free of charge. In addition, owners of approximately 170,172 model year 2010-2012 BMW vehicles equipped with inline 6 cylinder engines not covered by this recall, will receive an extended warranty to address this condition. The recall began on September 24, 2014. Owners may contact BMW at 1-800-525-7417.
BMW is recalling certain model year 2008-2012 1-Series coupes and convertibles manufactured December 2007 through September 2011; and 2007-2011 3-Series coupes and convertibles manufactured March 2007 through October 2011; 2007-2011 3-Series sedans manufactured March 2007 through October 2011; 2007-2011 3-Series sports wagons manufactured March 2007 through…
Risk and remedy
Risk
If there is a loss of electrical power to the vehicle, the vehicle may unexpectedly stall, increasing the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the positive battery cable connector and secure it with an improved method, free of charge. The recall began on March 13, 2013. Owners may call BMW at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Owner complaints
19 complaints
What owners report most
Latest complaints
- Engine
Continuing coolant problems, engine shut off going down the hwy bc overheated////engine not secure-moves around literally/////camshaft timing position sensor code. On Dec 24th I purchased a 2012 BMW 135i convertible from Alboet Motor Sports on Pass Rd in Gulfport, MS. Before I went I…
Continuing coolant problems, engine shut off going down the hwy bc overheated////engine not secure-moves around literally/////camshaft timing position sensor code. On Dec 24th I purchased a 2012 BMW 135i convertible from Alboet Motor Sports on Pass Rd in Gulfport, MS. Before I went I specifically asked if the car had any mechanical or cosmetic damage and [XXX] lied and said nothing was wrong. After signing all documents she started pretending to look for the title. She promised i would get it in a week or so in the mail. The car had a ruined engine and radiator, missing front air intake ducts completely, who knows what else. They only paid 2700 bc it states stationary with mechanical damage from auction. I paid the $10,700 in cash they charged me. I'm sick to death just thinking about it. She will not repair, refund or anything like that. She finally today sent a pic of a title to the car and its got a man in Mobile, AL name on it. I don't think she ever even tried to get it and doubt she is now either. I have wasted more time and money on this, I feel robbed of over 10k. I have no car to start my new job the 24th. Please help me, [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Engine · Fuel/propulsion system · Suspension
Vehicle stalls when accelerating from a stopped position. Several time, while stopped at an intersection with crossing traffic, I attempted to drive through the intersection but the car failed to accelerate. I tried shifting from auto to manual but the car still failed to accelerate for at…
Vehicle stalls when accelerating from a stopped position. Several time, while stopped at an intersection with crossing traffic, I attempted to drive through the intersection but the car failed to accelerate. I tried shifting from auto to manual but the car still failed to accelerate for at least 5 seconds at which time it jolted forward. The issue started at around the 50K mile mark 3 years ago and continues still today (~90K miles). I am not seeing my vehicle listed under recalls related to loss of electrical power/stalling from 2/7/2013 and have not had any recall notifications related to my car since 2017. I have been attempting to resolve a constant problem with cracking sounds from front suspension when turning. To date, I have had the entire front suspension rebuilt including; control arm assy, sway bar assy, bearing, struts, and u-joints. I am still experiencing this problem, especially during colder weather days. now I am learning that there IS a recall from 8/1/2020 related to my car model but my vin IS not included. nhtsa ID number: 10179812 manufacturer communication number: b310112. summary cracking noises from the frontaxle area while turning the wheels, when station: cracking noises are heard from the front axle area while maneuvering at low speeds (e.g., parking lot maneuvers) or when turning the steering wheel while stationary.
- Electrical system
TL* the contact owns a 2012 BMW 135I. The contact stated that while their wife was driving at approximately 45 mph, the vehicle stalled while the power steering ceased with an unknown warning light illuminated. The contact contacted a certified mechanic who informed the contact that the failure was…
TL* the contact owns a 2012 BMW 135I. The contact stated that while their wife was driving at approximately 45 mph, the vehicle stalled while the power steering ceased with an unknown warning light illuminated. The contact contacted a certified mechanic who informed the contact that the failure was related to nhtsa campaign number: 13v044000 (electrical system) however, the vin was not included. The vehicle had not been repaired. The manufacturer was made aware of the failure and a case was filed. The approximate failure mileage was 50,000. *Ln *tr
- Engine
When I had fewer than 50K miles, my thermostat broke suddenly while I was driving. I had no previous issues or warning lights. Since that repair, I have had 2 coolant leaks, and one related pipe crack. This week, I had air in my coolant system and had to have it drained. These all appear to be related.
- Fuel/propulsion system
Vehicle stalls when more than 1/8 throttle IS applied, vehicle has difficulty starting. Check engine light comes on when applying small throttle inputs. The 4 previous years of this vehicle make and model, the high pressure fuel pump has had a known problem which resulted in a class action lawsuit…
Vehicle stalls when more than 1/8 throttle IS applied, vehicle has difficulty starting. Check engine light comes on when applying small throttle inputs. The 4 previous years of this vehicle make and model, the high pressure fuel pump has had a known problem which resulted in a class action lawsuit that adjusted the warranty period for the four previous model years up to 120K miles. BMW made slight changes to the engine for the next model years, but left the exact same part that resulted in the original lawsuit settlement. That part IS the point that failed on my vehicle. Should the warranty extension they agreed to in the settlement apply to all makes and models BMW made with the same defective part? This problem caused my wife to be stranded in the middle of the freeway and had to be towed out of the lanes of traffic.
- Engine · Fuel/propulsion system
Vehicle almost stalls when accelerating from a stop. Vehicle will also surge forward when vehicle comes to a stop. Both issues are worsened when the temperature IS warm outside and the air conditioning IS on. Have taken vehicle to the BMW dealer several times to correct, but they never find anything wrong.
- Electrical system · Engine · Unknown or other
******* delete voq ******* this complaint IS being marked for deletion because it IS requested by the consumer that they wish to have it removed*djr ******* delete voq *******
- Fuel/propulsion system
I was stopped at a traffic light so when the light turned green for the left turn I turned onto the middle lane of a 6 lane highway and started to accelerate when suddenly there was a vibration and the suspension light came on so I slowed down and moved to the far right lane where I noticed I had…
I was stopped at a traffic light so when the light turned green for the left turn I turned onto the middle lane of a 6 lane highway and started to accelerate when suddenly there was a vibration and the suspension light came on so I slowed down and moved to the far right lane where I noticed I had no acceleration. I limped into a parking lot and the car seemed to be vibrating and running rough so I shut it down and walked home. after towing it to BMW of daytona I got the news that I blew a charge pipe. they said the charge pipe IS made of plastic and got brittle over time and blew off the throttle body. I found numerous remarks of others that had that problem when I googled it. many of them stated they had it replaced with an aluminum charge pipe so I called BMW back and ask them what they were replacing it with plastic or aluminum. they stated that it was the same plastic part I had on the car in the first place. so I said great then we can expect it to happen again. many comments online suggested this should be a recall item. one can imagine pulling out in front of a truck and suddenly loosing acceleration. the real kicker IS BMW replacing it with a known faulty part.
- Engine · Power train
Vehicle exhibits an intermittent hesitation (like a stall) where there IS an apparent total loss of power at low speeds (coasting) or from stopped. on several instances this has happened while in a left turn lane with oncoming traffic and creates a serious safety hazard. the vehicle more…
Vehicle exhibits an intermittent hesitation (like a stall) where there IS an apparent total loss of power at low speeds (coasting) or from stopped. on several instances this has happened while in a left turn lane with oncoming traffic and creates a serious safety hazard. the vehicle more frequently, but not always surges in rmp without throttle input when coming to a stop. in many instances, the vehicle lurches forward and extra braking IS required. this has resulted in near miss, rear end, assured clear distance issues. these two problems occur during city/residential driving including at slow speeds through school zones (a major concern). I purchased this car used, but with low mileage and encountered these issues on the day of delivery. dealer reprogrammed an engine control module according to a BMW safety bulletin which I found online. the drive home was noticeably improved, however the conditions returned shortly there after and persist to this day.
- Air bags · Air bags › Sensor › Occupant classification · Seats
Passenger seat occupancy sensor IS having errors. Showing a passenger when none IS present and also showing no passenger when there IS one in the seat. This IS a pretty major safety issue.
- Power train · Vehicle speed control
Reference: http://www.1addicts.com/forums/showthread.php?t=1263580 BMW 135I dct transmission oil pan/gasket started leaking due to the constant hot temperature from the exhaust causing part to deform. Leak was not detectable until transmission fails, causing car to be stranded.
- Air bags
Takata recall I received a letter from BMW USA dated september 2017 telling me that parts were available to satisfy this recall and to make an appointment right away to have the airbag replaced. I made an appointment and it was cancelled because the dealership "didn't have the parts and didn't know…
Takata recall I received a letter from BMW USA dated september 2017 telling me that parts were available to satisfy this recall and to make an appointment right away to have the airbag replaced. I made an appointment and it was cancelled because the dealership "didn't have the parts and didn't know when they would get them". BMW cannot tell me when they will have the part, despite sending me a letter stating that they "have the necessary parts to complete this recall".
- Air bags
TL* takata recall. The contact owns a 2012 BMW 135I. The contact received notification of nhtsa campaign number: 16v071000 (air bags) for the driver side frontal air bag inflator. The parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of…
TL* takata recall. The contact owns a 2012 BMW 135I. The contact received notification of nhtsa campaign number: 16v071000 (air bags) for the driver side frontal air bag inflator. The parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.
- Air bags
Takata recall - received a recall notice last year, but part remains unavailable, placing me at risk, particularly in hot south florida.
- Engine · Fuel/propulsion system
I have brought my car into schomp BMW twice for this issue, the latest being last week telling them I believe there IS a recall for my vehicle and it feels as if it will stall as I am turning a corner or stopped and begin accelerating. they showed no recall and hooked my car up to computer and no…
I have brought my car into schomp BMW twice for this issue, the latest being last week telling them I believe there IS a recall for my vehicle and it feels as if it will stall as I am turning a corner or stopped and begin accelerating. they showed no recall and hooked my car up to computer and no codes came back with any issues. I am really scared that my car will stall in the middle of turning in front of traffic. It has hesitated to where I have had to press the accelerator to the floor to get the car to move. I am afraid for my safety and for the safety of others. I received the official recall notice in the mail wednesday and called schomp and told them I want it repaired immediately if that IS the issue. they told me they don't have parts and that I will receive another notice and that I have to wait. I am nervous that something will happen and someone will be injured. what can I do for now? *js
- Engine · Power train
Vehicle equipped with 7 speed dct transmission. When car had almost come to a stop there was sudden burst of engine speed (to about 2500 rpm) causing car to shoot forward. Accident avoided by jamming on the brake. This then happened several more times. Dealer re-programmed ecm and problem has not…
Vehicle equipped with 7 speed dct transmission. When car had almost come to a stop there was sudden burst of engine speed (to about 2500 rpm) causing car to shoot forward. Accident avoided by jamming on the brake. This then happened several more times. Dealer re-programmed ecm and problem has not gone away. Occurs intermittently. Most recent episode in my own garage where barely avoided driving into front wall when it surged. Dealer again re-set software. Clear from dealers reaction that this IS not isolated incident and clear that they don't have a real solution. This IS basically a variant of unintended acceleration and an accident waiting to happen. *tr
- Electronic stability control (esc) · Engine · Power train
When driving in traffic the BMW 135I dct transmission will stall when coming to a stop. This results in a loss of power steering. Sometimes before the car stalls, the engine will rev without driver input to 2500 rpm and drop the clutch which results in a rapid acceleration if your foot IS not on…
When driving in traffic the BMW 135I dct transmission will stall when coming to a stop. This results in a loss of power steering. Sometimes before the car stalls, the engine will rev without driver input to 2500 rpm and drop the clutch which results in a rapid acceleration if your foot IS not on the brake this can be extremely dangerous. I have almost crashed the car many times as a result of this. BMW issued a technical service bulletin to dealers that can be found if you google the issue, but there IS no known remedy. The car has been in and out of the dealer close to 10 times and they claim there IS no issue. I believe the issue to be with software of the engine and transmission. *tr
- Engine · Power train
From the time of ownership (march 16, 2012) to now, the vehicle shuts off during operation while in idle rpm speed. The vehicle IS equipped with a six-speed manual transmission. Whether the clutch IS fully pressed in and in-gear, or the vehicle IS out-of-gear, there IS a possibility for the idle…
From the time of ownership (march 16, 2012) to now, the vehicle shuts off during operation while in idle rpm speed. The vehicle IS equipped with a six-speed manual transmission. Whether the clutch IS fully pressed in and in-gear, or the vehicle IS out-of-gear, there IS a possibility for the idle rpms dropping and the engine shutting off. This mostly occurs while stopping for a red light, stopping for a stop sign, or in stop-and-go traffic on the highway. For example, the vehicle IS approaching a stop sign at 25mph. The clutch IS fully pressed in, the brakes are applied, and the gear shifter IS changed from 3RD gear to 1ST gear. While approaching a complete stop with the clutch still fully pressed in, the engine rpms will drop from normal idle speed (600-800rpm) to zero. Therefore the engine has shut off going 3-5mph, leaving the driver with no power steering and no power brakes. Sometimes this stall IS violent; the vehicle shakes while rpms drop. Other times, the vehicle would stall without the driver even noticing. Also, this vehicle stalled twice while taking a turn at 15-20mph and the driver had to avoid an accident on both occasions because of this stalling issue. This critical safety problem occurred at a magnitude of once a month from march 2012 until july 2013. From july 2013 to september 2013, this stalling issue occurred three times a week. Then from september 2013 to now, the problem went back to once every month. This vehicle has been to the BMW dealership many times but because the problem IS intermittent, the dealership could not replicate the issue; therefore applying no repair or solution to this critical problem. BMW north america was contacted after the shop foreman explained that the vehicle cannot be fixed. BMW north america did not help in any way, therefore lawyer-involvement IS in effect to attempt in lemoning this dangerous vehicle. *tr
- Electrical system · Power train · Service brakes
Have taken the car five times for the same stalling,and lagging of the faulty dual clutch transmission. The car hesitates 3-5seconds no response to throttle input and then lunges violently forward. Car holds gear when pulling away from lights and then surges when parking the car almost causing me…
Have taken the car five times for the same stalling,and lagging of the faulty dual clutch transmission. The car hesitates 3-5seconds no response to throttle input and then lunges violently forward. Car holds gear when pulling away from lights and then surges when parking the car almost causing me to hit cars parked next to me. Software has been updated on the car four times and the issue IS still there. Was told that the mass airflow sensor was also faulty in the car and that might be causing the issue of surging and fluctuating idle. Mass airflow sensor was replaced and transmission issues as well as idling issues are still present. Take the car in for squeaky brakes and was told that the sound was normal, week later car IS shaking violently when slowing down on the highway. Upon inspection the front brake rotors are warped and all this has occurred on a brand new car with 12K miles and less then a year of ownership. Car IS also plagued by electrical gremlins that keep firing off the TPMS sensor warning lights that stay on after a reset and verification the tire pressure IS as stipulated by manufacturer in the door jam. *tr
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10215025Shipping specific non-deployed vehicle safety devices to lighting resources, llc. This service Information bulletin provides information on shipping "specific" noin-deployed vehicle safety devices that are classified as Dangerous Goods (DG) to Lighting resources, LLC
- 10215024The engine?s intake charge-air duct limited warranty extension to 10 years/120,000 miles applies to ?eligible USspecification
- 10199287CLASS ACTION SETTLEMENT: N54/N54T/N55 ELECTRIC ENGINE COOLANT PUMP . With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered a nationwide settlement with the plaintiffs in the following class action: Oliver, et al v. BMW NA, et al
- 10198894CLASS ACTION SETTLEMENT: N54/N54T/N55 ELECTRIC ENGINE COOLANT PUMP . With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered a nationwide settlement with the plaintiffs in the following class action: Oliver, et al v. BMW NA, et al
- 10194296Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.
- 10175267Power Reduction FC2A82 Intake VANOS and/or FC2 A87 Exhaust VANOS Camshaft Fault: The "Service Engine Soon" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled the engine then usually performs normally.
- 10163029N55 ENGINE: FC 28A0 OR 101F01 THROTTLE VALVE OPENING ANGLE. The engine malfunction warning is illuminated and one of the following fault codes are stored in the DME shortly after programming the vehicle or with a customer complaint.
- 10162434Service Action: CIC - Install Navigation Road Map Database 2013. Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).
- 10162431"Erroneous CC Message "Remote control! Do not switch off the engine" is Displayed. An erroneous CC message, "Remote control!" " Do not switch off the engine" is displayed in the Central Information Display (CID). The engine can still be started, even with the CC message displayed. CAUSE: Car Access System (CAS) software error"
- 10162427Convertible Top Does Not Open Properly. When opening the convertible top, the interior cover flap remains open. CAUSE: The cable for the flap operation is either kinked or dislodged.
- 10162405Wear Marks on the C-pillar Area of the Soft Top Canvas. Wear marks may form on the soft top cover in the C-pillar area, above or below the canvas seam and or along the seam. These wear marks may be visible on one or both sides and are generally less than 4mm in diameter. They are first visible as a smooth spot on the cover, and progress to a white mark. In severe cases, a hole could form in the cover material. 1. Improper limit spacing between the soft top cover and the soft top frame when folded in the fully open position 2. The seal carrier contacting and wearing the canvas top cover and threads 3. Tension straps and main bump stops out of adjustment.
- 10162404"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Follow the diagnosis test plan using the latest ISTA version. In Information Search, select the "Function Structure"" tab. Select Body, Mirror, Door mirror, Driver's or passenger side, Exterior Mirror Malfunction, and then press "Start Search". Select test plan ""AM5102_00010".
- 10162395N55 Engine: Various Faults Stored in DME Related to VANOS and Camshaft Position. A rattling noise can be heard from the engine compartment; the engine has a loss of power; and the Service Engine Soon lamp is illuminated. One or more of the following faults may be stored. E70, E71, E82, E88, E90, E92 and E93: 2D5A - VANOS, intake: control fault, camshaft sticking 2D5B - VANOS, intake: control fault, position not reached 2D60 - VANOS, exhaust: control fault, camshaft sticking 2D61 - VANOS, exhaust: control fault, position not reached 2D9F - camshaft input sensor: signal implausible 2DA1 - Camshaft exhaust sensor: signal implausible 300C - Camshaft input sensor: signal high 300D - Camshaft input sensor: signal low 300E - Camshaft exhaust sensor: signal high 300F - Camshaft exhaust sensor: signal low F07, F10, F12, F13 and F25: 130104 - VANOS, intake: control fault, camshaft sticking 130108 - VANOS, intake: control fault, position not reached 130304 - VANOS, exhaust: control fault, camshaft sticking 130308 - VANOS, exhaust: control fault, position not reached 130E11 - Camshaft input sensor: signal implausible 130F11 - Camshaft exhaust sensor: signal implausible 164020 - Camshaft input sensor: signal high 164021 - Camshaft input sensor: signal low 164030 - Camshaft exhaust sensor: signal high 164031 - Camshaft exhaust sensor: signal low CAUSE One or both (intake and/or exhaust) of the VANOS gear assemblies have failed; the attaching bolts may have also loosened and/or broken.
- 10160287TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10160244TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10154816In an effort to improve the completion rate on Takata air bag recall affected vehicles; BMW NA has expanded the BMW Ultimate Rewards platform to include a new Recall Support page. This page will allow IRFs to check their customers VINs for open Takata recalls; and get rewarded for helping us with completing repairs.
- 10153726Takata class action settlement. Customer support program. Front driver side airbag modules.
- 10152314Door Open Message Displayed, Even Though Door Is Closed. The customer complains that while driving, a CCM (check control message) indicates the doors are open, even though they are closed. Also, sometimes the gong will sound and the interior lights will go on and off. Unspecified FRM door lock status due to voltage variations
- 10151335Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware.
- 10151170N51 Engine: Service Engine Soon Lamp Illuminated - Loss of Power and Various Faults Stored in the DME. The customer complains that the Service Engine Soon lamp is illuminated. The vehicle has lost power; the engine cranks but will not start; and various faults are stored in the DME for engine misfire and/or mixture adaptations. CAUSE The vehicle has lost fuel system delivery pressure due to a loose or split fuel line inside the fuel tank. The failure is related to an unfavorable stacking of tolerances between the rubber fuel hose and the plastic regulator nipple or deterioration of the rubber hose construction material.
- 10151119SI B84 03 14 February 2016 Communication Systems Technical Service This Service Information bulletin supersedes SI B84 03 14 dated October 2014. SUBJECT Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures CAUSE Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware CORRECTOPM None available at this time. We are currently working with the device manufacturer on a solution.
- 10151115SUBJECT Audio System Speaker Testing. For audio system speaker testing there is a NED (Non Electrical Diagnosis) Test Plan available. CAUSE We previously recommended use of the Audio Test CD (ATC) from BMW. This CD has been discontinued.
- 10151079SI B13 03 15 February 2016 Fuel Systems Technical Service This Service Information bulletin supersedes SI B13 03 15 dated March 2015 and replaces SI B13 04 13 dated March 2014. SUBJECT N20, N26, N55, N63TU, S63TU and S55 Engines: Bosch Injector ETK Part Number Error. The current version of the ETK incorporates multiple part number errors for the Bosch type injectors. Ordering the injectors by VIN number or manual identification in ETK may result in an incorrect part number.
- 10151068This Service Information bulletin supersedes SI B07 03 14 dated October 2015. Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Fault codes stored in vehicles being serviced are not being diagnosed, leading to repeat repair visits (source- Analysis of FASTA data and repeat repair visit reports). INFORMATION Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) to find their root cause during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
- 10151023Whistling Noise Coming from the Center Vent - A/C is Off . A very high pitched whistling or beeping noise is heard coming from the center vents. The flow of refrigerant through the expansion valve at certain temperature differentials.
- 10150389Service Action: CIC - Install Navigation Road Map Database 2013. The Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).
- 10150385"CCC - ""Please Insert Navigation DVD"" Appears on CID. The navigation map DVD cannot be read or detected. The message ""Please insert navigation DVD"" appears in the CID (Central Information Display). The navigation system is inoperative. This situation may also occur when upgrading to a new navigation map. The old map is recognized but the new one is not. CAUSE Faulty DVD drive; read error due to hardening of the anti-vibration gel on the read head"
- 10150334"Service Action: CIC - Install Navigation Road Map Database 2013. Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD). Note: The INITIAL enabling code ""FSC CIC map, N. America 2013 INITIAL"" is necessary to start the installation process and to activate the road map database."
- 10150330"Discharged Battery: Energy Diagnosis Must Be Performed. The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle ""discharged battery"" complaints. A discharged battery can have various causes, most of which do not concern the battery itself. A failed battery is often the symptom and not the cause. A fully serviceable battery fails when an electrical component causes the battery to discharge; the battery becomes internally damaged and must be replaced. For more information, refer to www.batteryuniversity.com/parttwo-42B.htm For this reason, replacing the battery is not usually a permanent repair. The cause of the discharged battery must be analyzed in order to guarantee a proper repair. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion with all results taken into to consideration. The procedure as outlined below contains information that will guide the technician into properly repairing the vehicle and getting paid for a warranty claim. CAUSE Refer to the ""Procedure"" section of this Service Information for details."
- 10150265Intermittently Stored FM Radio Stations Default to FM 87.7. Intermittently, the stored FM radio stations default to FM 87.7 after vehicle start-up. CAUSE 1. Low battery voltage or voltage drop at the head unit 2. Radio station preset contains FM 87.7 3. Remote key memory not set correctly or the setting is lost
- 10150264"The replacement OC3 seat mat (front passenger seat occupancy) will not enable when following ISTA Repair Instruction REP 65 77 604, ""Replacing sensor mat (OC3 mat) for passenger seat occupancy detector."" 1. When the new mat is installed in the vehicle, too much pre-load pressure will prevent the mat from being enabled. ISTA/P WILL NOT enable the new part, and will cause permanent damage to it. 2. The new part has incorrect coding."
- 10150224"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Complete the diagnosis test plan using the latest ISTA version. The test plan can be accessed via the following path: ""Information Search / Function Structure / Body / Mirror / Exterior mirrors / Driver's or passenger side / Electrochromic Mirror,"" and then press ""Start Search."" Select the test plan ""AM5102_00010."""
- 10150221Brake Fluid Maintenance Service: 36-Month Interval. The CBS displays the first brake fluid service as a 36-month interval from the date of production instead of the appropriate 24-month interval.
- 10150173"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Complete the diagnosis test plan using the latest ISTA version. The test plan can be accessed via the following path: ""Information Search / Function Structure / Body / Mirror / Exterior mirrors / Driver's or passenger side / Exterior Mirror https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/15...12/6/2013 Page 2 of 2 Malfunction,"" and then press ""Start Search."" Select the test plan ""AM5102_00010."""
- 10150167Incorrect Remaining Service Life from CBS Data for Brake pads. The calculated remaining service life for the brake pads (front and/or rear axle) from the CBS data does not match the actual brake pad thickness. The customer notices implausible remaining distances (too high or too low) on the front and/or the rear axle brake system. Note: E9x vehicles with xDrive are not affected by this bulletin. Software calculation in the brake pad wear model
- 10150161N55: Engine Difficult to Start at Cold Ambient Temperatures. The complaint may include any of the following symptoms: * The engine stalls immediately after a cold start before driving away * The engine may run roughly or misfire after a cold start * The engine does not start cold or may take several attempts * To assist starting when cold, the accelerator may need to be depressed slightly and the idle speed raised for a few seconds so the engine does not stall This can occur most frequently at outside ambient temperatures between -15C and + 15C. It is possible that the Service Engine Soon (MIL) lamp is on with misfire fault(s) stored, but it is equally possible that there will be no faults stored in the DME. Unfavorable DME software Cold start or idling problems may arise due to poor fuel quality. The use of summer fuel during cold outside temperatures may also lead to such problems.
- 10150133In all audio modes (radio, CD, AUX-In, etc.), the audio output is distorted. It is more noticeable with high bass and high audio volume settings. There may also be an intermittent interference noise coming from the loudspeakers at low audio volume or when the radio is turned off. Audio settings in the RAD2+ (radio professional)
- 10150131"Enabling and Replacing New OC3 Seat Mat. The replacement OC3 seat mat (front passenger seat occupancy) will not enable when following ISTA Repair Instruction REP 65 77 604, ""Replacing sensor mat (OC3 mat) for passenger seat occupancy detector."" When the new mat is installed in the vehicle, too much pre-load pressure will prevent the mat from being enabled. ISTA/P WILL NOT enable the new part, and will cause permanent damage to it."
- 10150130The vehicle position is missing or incorrect on the navigation map. The navigation system integrated in the Car Information Computer (CIC) is not calibrated correctly.
Every BMW 135I model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.