2006 BMW 325CI
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2006 BMW 325CI. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2006 BMW 325CI. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2000-2005 323iT, 325iT, 325xiT, 320i, 323i, 325i, 325xi, 328i, 330i and 330xi and 2000-2006 323Ci, 325Ci, 328Ci, 330Ci, M3 Coupe, 323Cic, 325Cic, 330Cic, and M3 Convertible vehicles equipped with non-desiccated frontal Takata PSAN inflators and PSPI passenger frontal air bag inflators containing phase…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
BMW will notify owners, and dealers will replace the passenger's front air bag, free of charge. The recall began February 13, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2002-2005 325i, 325xi, 330i, and 330xi Sedans, and 325xi and 325i Sportswagons, 2002-2006 330Ci, 325Ci, and M3 Convertibles and 325i, 330i, and M3 Coupes, 2002-2003 M5, 540i, 525i Sedan, and 530i Sedans, and 540i and 525i Sportswagons, and 2003 X5 3.0i and 4.4i Sports Activity Vehicles. Please…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the vehicle has been remedied. BMW will notify owners, and dealers will replace the front driver air bag module, free of charge. The recall began Aug 2016. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall supersedes recall 14V-348 in its entirety. Additionally, vehicles that have had their driver side frontal air bag replaced previously as part of a recall remedy need to have their air bag replaced under this recall as well. Note: On December 17, 2015 BMW removed the model year 2004 X5 3.0i and 4.4i Sports Activity vehicle from this recall. Those vehicles were mistakenly identified as including the air bags that are subject to this recall.
Certain cardone master cylinders with part numbers 10-2925, 10-2987, 10-2987mza, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, and 11-3156, and with date codes lower than dca7078 sold as replacement equipment for use on the vehicles listed above. the seal on master cylinder can fail and leak brake fluid.
Risk and remedy
Risk
Loss of brake fluid can result in poor braking performance, possibly resulting in a vehicle crash.
Remedy
Cardone will notify owners and offer to repurchase any defective master cylinders. the recall began during april 2007. owners can contact cardone at 1-800-777-4780.
Owner complaints
36 complaints1 involved a crash
What owners report most
Latest complaints
- Electrical system
Internal Adaptive bi-xenon headlight wiring insulation flaking off exposing bare wire, thus causing headlight to fail
- Exterior lighting
The headlights in my car both went out because of this wiring issue. The wiring insulation inside the headlight is very prone to cracking and subsequently breaking which causes the headlight to not function. I have repaired this issue myself on both headlights for almost every wire going into the…
The headlights in my car both went out because of this wiring issue. The wiring insulation inside the headlight is very prone to cracking and subsequently breaking which causes the headlight to not function. I have repaired this issue myself on both headlights for almost every wire going into the igniter. No headlights is a major safety issue at night, and due to the cracking along all of the wiring, it could go out at any time again. I had this issue looked at by the dealership and they tried to sell me new bulbs instead. In the picture you can see the 3 repaired wires already and the 4th needed repair, the black wire, got severed.
- Engine and engine cooling › Exhaust system › Emission control › Crankcase (pcv)
The contact owns a 2006 BMW 325CI. The contact stated while stopped at a traffic light, she became aware of smoke coming from under the hood and the odor of something on fire. The vehicle had overheated on several occasions. There were no warning lights illuminated. The vehicle was towed to a…
The contact owns a 2006 BMW 325CI. The contact stated while stopped at a traffic light, she became aware of smoke coming from under the hood and the odor of something on fire. The vehicle had overheated on several occasions. There were no warning lights illuminated. The vehicle was towed to a dealer who diagnosed the vehicle with PCV valve heater failure. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 142,000.
- Air bags
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 20v018000 (air bags) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. BMW…
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 20v018000 (air bags) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. BMW of louisville (2200 blankenbaker pkwy, louisville, ky 40299, (502) 287-1501) was contacted and confirmed that the part was not available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Exterior lighting
Drivers side low beam started flashing when car hit bumps and while turning the steering wheel to the right. Opened bulb access cover to check the bulb and found that the majority of the wiring inside the headlight assembly has hardened and flaking insulation, exposing bare copper wire and allowing…
Drivers side low beam started flashing when car hit bumps and while turning the steering wheel to the right. Opened bulb access cover to check the bulb and found that the majority of the wiring inside the headlight assembly has hardened and flaking insulation, exposing bare copper wire and allowing it to short out. Removed the headlight assembly for a more through inspection and discovered the same damage on the high beam wiring and deterioration on the entire wiring harness inside the light. Serious safety risk as well as fire risk.
- Air bags · Exterior lighting · Seat belts
BMW 325ci 2006 front left adaptive headlight wiring deteriorates over time. This cause the wiring to crack and fail. The front left headlight failed while driving, creating a dangerous situation for the driver and others on the road. When the wiring fails the driver cannot display turn signals, use…
BMW 325ci 2006 front left adaptive headlight wiring deteriorates over time. This cause the wiring to crack and fail. The front left headlight failed while driving, creating a dangerous situation for the driver and others on the road. When the wiring fails the driver cannot display turn signals, use high beams or any headlight functions. BMW does not provide a solution or help to fix the issue. The vehicle was in motion at night when the headlight failed. The part IS the front headlight igniter wiring harness. The failure happened inside a sealed compartment and IS not exposed to any outside elements. This IS a common issue, a google search will bring up multiple other cases of failure in other cars with pictures. BMW 335ci 2006 rear tail lights short out frequently while driving and do not display turn signals. A fault IS shown on the dashboard. This happened at night while the vehicle was in motion and does not go away. The warning light IS only displayed after the turn signal IS turned on. BMW 325ci a front airbag warning light was displayed while driving and does not shut off. This happened when the vehicle was in motion and does not shut off. bmw325ci a front seatbelt warning light IS displayed on the dash periodically and does not shut off. The warning suggests there IS a failure with the seatbelt. This happened when the vehicle was in motion.
- Exterior lighting
Headlight wiring insulation IS deteriorating and falling apart. Right side headlight wiring IS completely damaged and headlight does not work.
- Air bags
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 15v318000 (air bags); however, the parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Hilton…
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 15v318000 (air bags); however, the parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Hilton head BMW (1230 fording island rd, bluffton, sc 29910) was contacted and confirmed that the parts were not available for the recall remedy. The manufacturer was made aware of the issue and was not able to confirm when the parts were to become available. The contact had not experienced a failure. Parts distribution disconnect.
- Suspension
My dealer said a rear spring in my used BMW IS cracked. the other rear spring has been replaced with an after market spring. I see on the internet that my type BMW has many problems with rear cracked springs. a manufacturing defect? The after market spring most likely replacing another cracked rear spring
- Air bags
Upon receiving a safety recall for both airbags back in november 2016, I have requested repeatedly to my local dealer (BMW of atlantic city) to remedy this for over a year now. At first I called the service department and was told I would be contacted once the parts arrived. Then, and after months…
Upon receiving a safety recall for both airbags back in november 2016, I have requested repeatedly to my local dealer (BMW of atlantic city) to remedy this for over a year now. At first I called the service department and was told I would be contacted once the parts arrived. Then, and after months of waiting I called back and got the same response. I called their main office at that point and got the same line from them. Finally I email them early january and month has passed with no reply.... Please advise on how to replace my faulty airbags....thank you...john
- Air bags
Takata recall. I received a letter from BMW dated august 2016 regarding the recall no. 15V-318 driver's air bag module and 13v-172/14v-42b passenger's air bag module. I have contacted dealer advantage BMW midtown - 713-289-1200 for months and they indicate they are still waiting on the part. meanwhile, I am driving around in an unsafe car. *tr
- Air bags
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received a notice for nhtsa campaign number: 15v318000 (air bags), however, the parts needed were not available. The contact believed that the manufacturer had exceeded a reasonable amount of time for the parts to become available.…
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received a notice for nhtsa campaign number: 15v318000 (air bags), however, the parts needed were not available. The contact believed that the manufacturer had exceeded a reasonable amount of time for the parts to become available. The dealer and manufacturer were contacted regarding the delay. The contact had not experienced the failure. Parts distribution disconnect.
- Air bags
Takata recall - I have been waiting for over a year or more to have the airbag replaced. the dealer IS unable to get the parts to fix the problem. the airbag has already been replaced once, but I was told it was not the correct one. the car IS basically worthless because no dealer or individual will buy it with an open recall. I would like takata to buy the vehicle for market price.
- Air bags
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 15v318000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The…
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 15v318000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect. updated 12/13/16*lj the consumer stated the air bags were replaced. Updated 12/15/16.*jb
- Air bags
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign numbers: 15v318000 (air bags) and 14v428000 (air bags); however, the parts to do the repairs were unavailable. The manufacturer exceeded a reasonable amount of time for the recall repairs. The manufacturer was not notified of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Air bags
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 15v318000 (air bags); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Air bags
"Takata recall"
- Air bags
Takata recall
- Air bags
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 15v318000 (air bags). The part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer…
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 15v318000 (air bags). The part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available. ...updated 09/14/16 *bf *js
- Air bags
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 15v318000 (air bags) and stated that the part needed for the repair was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall…
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 15v318000 (air bags) and stated that the part needed for the repair was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.....updated 08/29/16 *bf updated 08/30/16.*jb
- Air bags
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 15v318000 (air bags) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.
- Air bags
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 15v318000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The…
TL* takata recall. The contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 15v318000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was not notified of the issue. The contact had not experienced a failure. Vin tool confirms parts not available. ....Updated 07/05/16 *bf updated 07/21/16.*jb
- Air bags
TL* the contact owns a 2006 BMW 325ci. The contact received notification of nhtsa campaign number: 15v318000 (air bags) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.
- Air bags
TL* takata recall. The contact owns a 2006 BMW 325ci convertible. The contact received notification of nhtsa campaign numbers: 14v428000 (air bags) and 15v318000 (air bags), however, the parts to do the repairs were unavailable. The contact stated that the manufacturer exceeded a reasonable amount…
TL* takata recall. The contact owns a 2006 BMW 325ci convertible. The contact received notification of nhtsa campaign numbers: 14v428000 (air bags) and 15v318000 (air bags), however, the parts to do the repairs were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was aware of the issue. The contact had not experienced a failure. Parts distribution disconnect. Vin tool confirms parts not available. updated 02/12/16*lj
- Electrical system · Fuel/propulsion system
My wife was driving down a main street at rush hour. The car just stopped running and would not restart. To leave the vehicle my wife had to take her life in her hands to get across the busy street. It was fortunate that this did not happen on a busy freeway or she or someone else may have been seriously injured.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- BMW airbag light illumination
BMW IS conducting a safety recall campaign on approximately 200,000 MY04 through MY06 subject vehicles built through 11/30/05 to correct the front passenger seat air bag occupant detection mat. The specific vehicles included in the recall aremy04- 06/ 5-series with standard and sport seats, my04-06/ x3-series and…
BMW IS conducting a safety recall campaign on approximately 200,000 MY04 through MY06 subject vehicles built through 11/30/05 to correct the front passenger seat air bag occupant detection mat. The specific vehicles included in the recall aremy04- 06/ 5-series with standard and sport seats, my04-06/ x3-series and MY06/ 3-series with sport seats. In addition, BMW will extend the warranty coverage of the passenger seat air bag occupant detection mat to 10-year/unlimited mileage on approximately 120,000 remaining my04-06 subject vehicles built through 11/30/05. The specific vehicles included in the extended warranty are my 06/ 6 series, my 06/ 3-series with standard seats, my04-05/ Z4, my04-06/ 7 series, my 06/ X5, and my04-06/ 5-series with comfort seats.the average frequency of failures among the extended warranty groups was less than 1/7TH of the recall vehicle groups.please see bmw's 08v-384 recall notification for further detailsdepending on seat configuration and vehicle geometry, the occupant detection mat can fatigue during use depending on the manner and frequency of the front passenger's entry and exit.specifically, over time, micro-cracks could develop in the side flanks of the mat causing a broken circuit.a brokencircuit can lead to the deactivation of the passenger air bag and the illumination of both the air bag warning light and the passenger air bag light.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249437The basic conditions for initializing the power windows are not met.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10194296Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.
- 10184591SERVICE ACTION - HEAD AIR BAG HOLDER RETROFIT: A rattle noise may develop from the head air bag (ITS) gas generator contacting adjacent component. This noise can be heard while driving on an uneven roadway.
- 10182619Discharged Battery Energy Diagnosis Must Be Performed: The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle "discharged battery" complaints. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion, with all results taken into consideration. Without performing the energy diagnosis test plan, the root cause of the discharged battery cannot be identified. This increases the chances of a repeat repair.
- 10160287TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10160244TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10154816In an effort to improve the completion rate on Takata air bag recall affected vehicles; BMW NA has expanded the BMW Ultimate Rewards platform to include a new Recall Support page. This page will allow IRFs to check their customers VINs for open Takata recalls; and get rewarded for helping us with completing repairs.
- 10153726Takata class action settlement. Customer support program. Front driver side airbag modules.
- 10150160State Inspection and Emission (I/M) Test Fails Due To an Invalid VIN Number. The customer of an affected vehicle may fail to pass an I/M test due to a non-compliant 17digit vehicle identification number (VIN) stored in the DME (Digital Motor Electronic). The VIN read out and displayed on the state test printout does not match the actual VIN of the vehicle. If the DME was reprogrammed using the previously available BMW service equipment (e.g., Progman, GT1), it is possible that only the last 7 digits of the VIN were entered into the DME, and positions 4 through10 may only contain default characters. For example: The state I/M tester or OBD scan tool may read out WBAAA00000A123456 instead of the correct full 17-digit VIN, WBAZZ03492A123456.
- 10149558For the above-referenced vehicles with passenger?s side airbag modules, BMW of North America, LLC (?BMW NA?) will provide a Customer Support Program as outlined in the Takata Settlement Customer Support Program Overview attachment. This ?component-specific? customer support program applies only if there is a defect in materials or workmanship of the Takata passenger?s side airbag module in a listed vehicle.
- 10149557For the above-referenced vehicles with driver?s side airbag modules, BMW of North America, LLC (?BMW NA?) will provide a Customer Support Program as outlined in the Takata Settlement Customer Support Program Overview attachment. This ?component-specific? customer support program applies only if there is a defect in materials or workmanship of the Takata driver?s side airbag module in a listed vehicle.
- 10148179Diagnosis of Compound Brake System Complaints in M Vehicles. INFORMATION 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form. These surface hairline cracks are usually spread over the entire brake disc friction area, and have no negative influence on the durability or braking performance. The rotors should not be replaced only for their appearance reasons. When performing routine service on the brake system (pad replacement due to wear), the brake discs should be replaced if surface cracks are found to be greater than 13 mm, or if the brake disc thickness is below the minimum thickness. Always replace brake discs in pairs (per axle). Install new brake pads when replacing discs. By doing this, the service life of the friction pad surface is increased, and an even material loss is ensured. 2. Vibrations and/or steering wheel torsional vibrations during braking are caused by applying the brakes on discs with minimal to heavy corrosion. These vibrations are most noticeable when braking from high speeds with cold brake components (less than 212 degrees F), and will diminish with normal everyday operation. Parts replacement is not required. 3. After high brake loads, running noises can be heard when applying the brakes, and may also be heard to a limited extent after the brakes are released. (See the note in the Owner's Manual). These noises are reduced during normal everyday operation, due to further erosion of the brake pad friction lining. Visible surface cracks or craterlike recesses on the brake pad surface are caused by a minor difference in the material of the pad lining, which will decrease with further operation and should not be replaced due to their appearance.
- 10148100Special Technical Campaign. The National Highway Traffic Safety Administration (NHTSA) has urged vehicle manufacturers to conduct an investigation into air bags which may not deploy correctly. BMW is cooperating with this request. Takata is a supplier of air bags to several automotive manufacturers. They have informed NHTSA of a small number of cases of improperly deploying air bags in a few specific areas of the US. None of the reported cases involve any BMW vehicles. No determination has been made by BMW and Takata that a safety issue exists.This program involves the driver and front passenger air bag system. Specifically, the air bag system may have been manufactured with an inflator that was not produced to specification. After long-term exposure in high absolute humidity environments, in a crash in which air bag system deployment occurs, the air bag system housing may rupture. To assist Takata with their determination, BMW will be collecting air bags from a limited number of customer vehicles. Once the affected vehicle population has been determined, owners of affected vehicles will be notified by letter to visit their authorized BMW center to have their air bag(s) replaced. Additional information will be provided at that time. A press release from NHTSA on this topic is expected to be issued on Monday, June 23, 2014.
- 10147242Diagnosis of Compound Brake System Complaints in M Vehicles This Service Information bulletin supersedes SI 34 04 14 dated December 2014. Designates changes to the bulletin. INFORMATION 1.Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form. These surface hairline cracks are usually spread over the entire brake disc friction area, and have no negative influence on the durability or braking performance. The rotors should not be replaced only for their appearance reasons.When performing routine service on the brake system (pad replacement due to wear), the brake discs should be replaced if surface cracks are found to be greater than 13 mm, or if the brake disc thickness is below the minimum thickness. Always replace brake discs in pairs (per axle). Install new brake pads when replacing discs. By doing this, the service life of the friction pad surface is increased, and an even material loss is ensured. 2. Vibrations and/or steering wheel torsional vibrations during braking are caused by applying the brakes on discs with minimal to heavy corrosion. These vibrations are most noticeable when braking from high speeds with cold brake components (less than 212 degrees F), and will diminish with normal everyday operation. Parts replacement is not required. 3.After high brake loads, running noises can be heard when applying the brakes, and may also be heard to a limited extent after the brakes are released. (See the note in the Owner's Manual). These noises are reduced during normal everyday operation, due to further erosion of the brake pad friction lining. Visible surface cracks or craterlike recesses on the brake pad surface are caused by a minor difference in the material of the pad lining, which will decrease with further operation and should not be replaced due to their appearance.
- 10145287E46 PZEV/SULEV (M56) FUEL TANKS: REPLACEMENT AND PARTS RETURN PROCEDURE: BMW of North America, LLC (BMW NA) will begin offering factory remanufactured fuel tank assemblies for E46 (3 Series) PZEV/SULEV (Model vehicles with the M56 engine).
- 10037025BMW: procedure for determining and replacing incandescent and halogen light bulbs under warranty.
- 10036979BMW: a new technical process has been created for BMW to identify causes of steering complaints with a wide range of models.
- 10033130BMW vehicles: fuel level sensor repairs. Where it IS necessary to replace the right or the left side fuel level sensor due to a failure, the entire pump and housing or delivery unit (suction jet assembly) do not need to be replaced as well. In some cases, epc does not show that the repair kit IS available separately in the illustration, but it IS available in the parts description. All models. No model years listed.
- 10027628BMW vehicle: due to material deterioration of certain components of the secondary air system, the service engine soon light may illuminate with fault code 2761 (secondary air system) stored in dme fault memory. 325Cia sulev (E46) models affected with M56 engines.
- 10024511Voluntary emissions recall 07e-a03: E46 M56 replace secondary air system components.
Every BMW 325CI model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.