2006 BMW 325I
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2006 BMW 325I. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2006 BMW 325I. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2006-2011 3 Series Sedan (324i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi), 2006-2012 3 Series Sportswagon (325xi, 328i, 328xi), and 2009-2011 3 Series Sedan (335d) vehicles. The original steering wheel may have been replaced with a sport or M-sport steering wheel equipped with an inflator that…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Remedy
Dealers will inspect and replace the driver's air bag module as necessary, free of charge. Owner notification letters were mailed August 30, 2024. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2006 525i, 525xi, 530i, 530xi, 530xi Sports Wagon, 325i, 325xi, 325xi Sports Wagon, 330i, 330xi, Z4 3.0i and Z4 3.0si vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Risk and remedy
Risk
An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.
Remedy
BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. The recall began May 30, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall is an expansion to recall 17V-683.
BMW of North America, LLC (BMW) is recalling certain model year 2000 323i sedans, coupes, convertibles, and Sports Wagons; 2000 328i sedans and coupes; 2001-2005 325i sedans, coupes, convertibles, and Sport Wagons; 2001-2005 325xi sedans and Sports Wagons; 2006 325i coupes and convertibles; 2001-2006 330i sedans, coupes, and convertibles; 2001-2005 330xi…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the passenger's frontal air bag, excessive internal pressure could cause rupturing of the inflator resulting in metal fragments striking and potentially seriously injuring the passenger seat occupant or other occupants.
Remedy
Owners are advised not to drive their vehicles until they have been repaired. BMW will notify owners, and dealers will replace the passenger side frontal air bag, free of charge. An interim notice was mailed to owners in September 2014. A second notice was mailed when an adequate supply of parts became available, on December 1, 2014. Owners may contact BMW customer service at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
BMW of North America, LLC (BMW) is recalling certain 2006-2011 323i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi and M3, 2007-2011 328i xDrive, 335i xDrive and 335is and 2009-2011 335d vehicles. The wiring and electrical connectors for the system that controls air flow for the heating and air conditioning system may overheat.
Risk and remedy
Risk
Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.
Remedy
BMW will notify owners, and dealers will replace the wiring and electrical connectors, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notice when the remedy becomes available. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, Inc. (BMW) is recalling certain 2006 325i, 325xi, 330i, 330xi, 525i, 525xi, 530i, 530xi, and 550i vehicles equipped with the Sport Seat option and certain 2006 525i, 525xi, 530i, 530xi, 550i vehicles with standard seats. The front passenger seat occupant detection mat that determines if, and how, the passenger frontal air bag should…
Risk and remedy
Risk
Should the system fail, in the event of a crash, the front passenger air bag would be deactivated, increasing the risk of personal injury.
Remedy
BMW will notify owners, and dealers will repair the occupant detection mat to eliminate the possibility that it may crack, replacing it as necessary, free of charge. The recall began September 1, 2017. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America LLC (BMW) is recalling certain model year 2006 325i, 325xi, 330i, 330xi sedans and 325xi sports wagons, model year 2007 328i, 328xi, 335i, 335xi sedans and 328i and 328xi sports wagons, model year 2006-2007 525i, 525xi, 530i, 530xi, 550i sedans and 530xi sports wagons, model year 2006 760i sedans, model year 2006-2007 750i, 750Li, and…
Risk and remedy
Risk
Should the system fail, in the event of a crash, the front passenger air bag would be deactivated, increasing the risk of personal injury.
Remedy
BMW will notify owners with an interim notification letter in January 2014 since parts are not currently available. When parts are available, BMW sent a second letter in August and dealers will repair the occupant detection mat to eliminate the possibility that it may crack, free of charge. Additionally, owners of model year 2006-2007 3 Series with standard seats, 5 Series with comfort seats, and Z4 models, will receive an extended warranty on their front passenger seat occupant detection mat. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Owner complaints
515 complaints12 involved a crash21 involved a fire8 injuries
What owners report most
Latest complaints
- Electrical system
While driving the vehicle, the blower (A/C) began to cycle on and off. Then I began to smell electrical smoke. Then I began to see smoke coming from vents and where the windshield meets the dashboard, closer to the passenger side. I pulled over and shut off the car as the smoke was getting worse…
While driving the vehicle, the blower (A/C) began to cycle on and off. Then I began to smell electrical smoke. Then I began to see smoke coming from vents and where the windshield meets the dashboard, closer to the passenger side. I pulled over and shut off the car as the smoke was getting worse inside the car. I popped the hood and saw smoke coming from the passenger side. I then called 911. Smoke was beginning to billow from engine compartment. As I was talking to the 911 dispatcher, I saw flames beginning in the engine bay close to the firewall on passenger side. The car was a total loss and is in a tow yard. It can be inspected upon request. The 911 operated told me to be aware of smoke and explosions so I backed away about 30ft. Many cars were passing by, close to the car. There are 2 safety recalls on this vehicle that are related to possible fire. I have an open case with BMW USA. They have not inspected the car. I have liability only for insurance so they will not cover. There were no warning lamps or indicators before fire.
- Engine · Fuel/propulsion system · Service brakes
Since the airbag was not fixed, it has caused PVC meltings as well as leakage
- Electrical system · Engine · Fuel/propulsion system
The Valvetronic Actuator malfunctions. The malfunction may have been caused by a Battery Positive Cable that has corroded over time. The result is that the vehicle stops unexpectedly during acceleration. Driver safety and that of others is put at risk due to the vehicle suddenly losing power and…
The Valvetronic Actuator malfunctions. The malfunction may have been caused by a Battery Positive Cable that has corroded over time. The result is that the vehicle stops unexpectedly during acceleration. Driver safety and that of others is put at risk due to the vehicle suddenly losing power and stoping while being driven. The vehicle was evaluated by the dealer. Warning lamps were intermittent and inconsistent. To my knowledge there is no Valvetronic Actuator or Battery Cable specific warning lamps or messages. There was a 2017 recall for the Battery Positive Cable, but my specific VIN was not covered (by a few months). My VIN (1986 325I) should have been included in the 2017 recall.
- Air bags · Seats
The passenger seat occupancy sensor (OC3 mat) on my 2006 BMW 3 Series (VIN: [XXX] ) has failed. As a result, the front passenger airbag is disabled, which poses a serious safety risk. BMW issued a 15-year warranty extension for this issue, acknowledging it as a common failure, but my vehicle is now…
The passenger seat occupancy sensor (OC3 mat) on my 2006 BMW 3 Series (VIN: [XXX] ) has failed. As a result, the front passenger airbag is disabled, which poses a serious safety risk. BMW issued a 15-year warranty extension for this issue, acknowledging it as a common failure, but my vehicle is now slightly outside the coverage period. This part is vital for detecting front-seat occupants and enabling the airbag during a crash. I believe BMW should still be required to fix this safety-critical defect, especially in vehicles where the issue was never repaired while under the extended coverage window. This should be reclassified as a full safety recall, not just an expired service campaign. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Electrical system · Engine and engine cooling
The contact owned a 2006 BMW 325i. The contact stated while driving 60-65 MPH, the A/C became inoperable and made an abnormally loud sound. The contact then noticed an abnormal burning wiring odor, and there was smoke coming out of the A/C vents. There was no warning light illuminated. The contact…
The contact owned a 2006 BMW 325i. The contact stated while driving 60-65 MPH, the A/C became inoperable and made an abnormally loud sound. The contact then noticed an abnormal burning wiring odor, and there was smoke coming out of the A/C vents. There was no warning light illuminated. The contact stated that she attempted to pull to the side of the road, but could not safely do so. The contact continued driving and came to a complete stop at the traffic light, where the cabin became engulfed in smoke. The contact then pulled into a business parking lot and immediately exited the vehicle. The contact stated upon opening the hood, the contact noticed a reflection of the flame inside the hood. The contact ran into the business and asked for assistance. The contact stated that upon returning to the vehicle, the contact noticed that the fire had started from the middle of the hood to the cabin of the vehicle. The contact and the business employee attempted to extinguish the fire with two fire extinguishers but were unable to do so. The fire was extinguished by the fire department. The contact stated that the vehicle burned to the ground from the middle of the hood to the trunk, where the gas tank was located, and the hood was fractured in half. The contact stated that there were burned particles around the parking lot, but there was no property damage. The fire department report was filed. A police report was filed, but the contact did not have the information available. There was no injury sustained. The vehicle was towed to a tow lot, where it was totaled. The dealer and the manufacturer were not notified of the failure. The failure mileage was approximately 140,000.
- Air bags
The contact owns a 2006 BMW 325I. The contact stated while driving at undisclosed speeds, the air bag warning light illuminated. The contact received notification of NHTSA Campaign Number: 24V513000 (Air Bags); however, the part to do the recall repair was not yet available. The local dealer was…
The contact owns a 2006 BMW 325I. The contact stated while driving at undisclosed speeds, the air bag warning light illuminated. The contact received notification of NHTSA Campaign Number: 24V513000 (Air Bags); however, the part to do the recall repair was not yet available. The local dealer was contacted. The dealer offered an inspection but declined to repair the vehicle. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The manufacturer referred the contact to the NHTSA Hotline. The failure mileage was approximately 130,000. Parts distribution disconnect.
- Engine
This compliant is regarding the cooling system of BMW 32d5i 2006. Experience overheating of the car. The BMW dealership service department has confirmed that the water pump is at fault. And the quote for water pump replacement is their system. Yes, this is the second recurrency of overheating.…
This compliant is regarding the cooling system of BMW 32d5i 2006. Experience overheating of the car. The BMW dealership service department has confirmed that the water pump is at fault. And the quote for water pump replacement is their system. Yes, this is the second recurrency of overheating. Yes, the dashboard indicated overheating. The second warning was October 23,2024. The first warning was several years prior.
- Air bags
There is a recall 17v-428 for the seat mat, and i went to my local BMW dealer and said this car was not on the list, but they acknowledge it’s the same issue but because this VIN was not included they can’t fix it at no charge . They want $2100 to repair. Can you help me ? Thanks
- Electrical system · Engine and engine cooling
The contact's husband owns a 2006 BMW 325i. The contact stated moments after her son had started, parked and exited the vehicle, there was smoke coming from under the hood. The under hood caught on fire and the hood failed to open. The fire was extinguished by the fire department. The contact…
The contact's husband owns a 2006 BMW 325i. The contact stated moments after her son had started, parked and exited the vehicle, there was smoke coming from under the hood. The under hood caught on fire and the hood failed to open. The fire was extinguished by the fire department. The contact stated that the under hood, the front of the vehicle and the front tires burned significantly. A fire department report was filed. A police report was not filed. There was no injury sustained. The vehicle remained at the residence. The vehicle was awaiting to be destroyed. The dealer was contacted. The contact contacted the manufacturer and sent pictures of the incident to the manufacturer; however, the manufacturer informed the contact that the fire was not related to NHTSA Campaign Number: 22V119000(Engine and Engine Cooling). The failure mileage was unknown.
- Engine and engine cooling
The contact owns a 2006 BMW 325I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated while driving 40 MPH, there was a significant amount of smoke coming out of the…
The contact owns a 2006 BMW 325I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated while driving 40 MPH, there was a significant amount of smoke coming out of the exhaust pipe and coming from underneath the hood of the vehicle. The check engine warning light was illuminated. The contact drove to the local dealer, where it was diagnosed that the PCV valve heater fuses had failed. The dealer charged a fee for the repair because the recall remedy was not available. The dealer installed an inline fuse and wiring that connected the PCV valve to the PCV valve heater. The contact stated that he received a second notice advising that the recall remedy was available, and the vehicle was taken back to the dealer, where the recall repair was performed. The vehicle was repaired. The contact later contacted the manufacturer for reimbursement, but the manufacturer referred the contact back to the dealer for assistance. The contact stated that he followed up with the dealer, who advised him that the failure was not related to the recall. The contact was not reimbursed. The failure mileage was approximately 132,000.
- Fuel system, gasoline
The contact owns a 2006 BMW 325I. The vehicle was taken to the local dealer for routine maintenance. The mechanic informed the contact that vehicles older than 2013 were not serviced by the dealer. The vehicle was diagnosed with a fuel leak. There were no warning lights illuminated. The vehicle was…
The contact owns a 2006 BMW 325I. The vehicle was taken to the local dealer for routine maintenance. The mechanic informed the contact that vehicles older than 2013 were not serviced by the dealer. The vehicle was diagnosed with a fuel leak. There were no warning lights illuminated. The vehicle was not repaired. The contact stated that while adding fuel, he noticed that fuel was leaking from the fuel tank. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 229,896.
- Air bags · Seat belts · Seats
Put a box of moderate weight into the passenger seat (hard drives) - probably 40 lbs. After driving for a few minutes and over a few bumps, the seat belt warning light came on because the seat sensor was tripped by the weight. Put the seat belt on to silence the warning. Shortly thereafter, both…
Put a box of moderate weight into the passenger seat (hard drives) - probably 40 lbs. After driving for a few minutes and over a few bumps, the seat belt warning light came on because the seat sensor was tripped by the weight. Put the seat belt on to silence the warning. Shortly thereafter, both the seatbelt and passenger airbag warning lights showed on the dash, regardless of occupancy. Hooked up to scanning tool and cleared the codes but they always return. This is not a rare event from reading the online forums - it is likely due to the sensor mat in the seat for occupancy being defective, or a combination of that and the seat belt pre-tensioner being defective, for the passenger side only. The vehicle operates normally other than the warning lights. Obviously have not tested the airbag, but that is highly unlikely to be the actual problem from my investigation of the symptoms.
- Air bags · Seats
Existing vehicle recall excludes this particular VIN among the same MY and model even though this VIN is affected. Report Receipt Date: NOV 12, 2013 NHTSA Campaign Number: 13V564000 Component(s): AIR BAGS Potential Number of Units Affected: 76,565 Manufacturer: BMW of North America, LLC SUMMARY…
Existing vehicle recall excludes this particular VIN among the same MY and model even though this VIN is affected. Report Receipt Date: NOV 12, 2013 NHTSA Campaign Number: 13V564000 Component(s): AIR BAGS Potential Number of Units Affected: 76,565 Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America LLC (BMW) is recalling certain model year 2006 325i, 325xi, 330i, 330xi sedans and 325xi sports wagons, [shortened]. The front passenger seat occupant detection mat that determines if and how the passenger frontal air bag should deploy in a crash may fatigue and develop cracks which could lead to a system failure. CONSEQUENCE: Should the system fail, in the event of a crash, the front passenger air bag would be deactivated, increasing the risk of personal injury.
- Air bags · Electrical system · Service brakes
After recall done pvc valve and blower heat a/c now not working the car engine light come up abs /brake and more
- Engine
I was driving on the freeway when all of a sudden a lot of white smoke started to come from the engine. The car instantly overheated and it shut off. My car had no problems until now. I called a tow truck to bring it home. I had many mechanics check it out and they couldn’t figure out why this…
I was driving on the freeway when all of a sudden a lot of white smoke started to come from the engine. The car instantly overheated and it shut off. My car had no problems until now. I called a tow truck to bring it home. I had many mechanics check it out and they couldn’t figure out why this happened out of nowhere. They all said the same thing that this car was in fixable and it’s not ever drivable no more. Then I received this letter from BMW saying that my car was on a safety recall list and they have no remedy.
- Engine and engine cooling
The contact owns a 2006 BMW 325I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable…
The contact owns a 2006 BMW 325I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Engine and engine cooling
The contact owns a 2006 BMW 325I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that upon starting the vehicle, he smelled a…
The contact owns a 2006 BMW 325I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that upon starting the vehicle, he smelled a burning odor. There was no warning light illuminated. The contact stated that he was unable to duplicate the failure using an OBD reader. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 76,000. VIN tool confirms parts not available.
- Air bags
The contact owns a 2006 BMW 325i. The contact stated that the dealer had previously replaced the passenger's side front seat air bag sensor and steering wheel air bag sensor; however, the failure recurred while his wife was driving at an undisclosed speed, with the air bag warning light being…
The contact owns a 2006 BMW 325i. The contact stated that the dealer had previously replaced the passenger's side front seat air bag sensor and steering wheel air bag sensor; however, the failure recurred while his wife was driving at an undisclosed speed, with the air bag warning light being illuminated. The dealer was made aware of the failure; however, the vehicle was not diagnosed nor repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 130,000.
- Fuel/propulsion system · Unknown or other
I'm starting to lose gas mileage and a very strong smell of gas inside and outside of car .
- Engine and engine cooling
The contact owns a 2006 BMW 325I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) and requested to be removed from the recall distribution list. The local dealer and manufacturer were not contacted.
- Air bags · Air bags › Sensor › Occupant classification
Component failed: passenger seat occupancy sensor (BMW error code: 0x93C3) Implication: passenger airbag will not deploy in case of accident if the occupancy sensor is defective. Similar problems: similar recalls were issued by BMW for the same model and year but with only sports seat; regular…
Component failed: passenger seat occupancy sensor (BMW error code: 0x93C3) Implication: passenger airbag will not deploy in case of accident if the occupancy sensor is defective. Similar problems: similar recalls were issued by BMW for the same model and year but with only sports seat; regular seats were not recalled. Previous inspections: this issue has not been previously inspected, but personal inspection leads to faulty seat occupancy sensor. Prior warnings: dashboard shows seatbelt and airbag lights; roof indicator lamp shows passenger airbag off.
- Engine and engine cooling
The contact owns a 2006 BMW 325I. The contact stated while starting the vehicle, there was an abnormal smoke odor coming from the instrument panel. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet…
The contact owns a 2006 BMW 325I. The contact stated while starting the vehicle, there was an abnormal smoke odor coming from the instrument panel. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The dealer was not notified. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. VIN tool confirms parts not available.
- Electrical system · Steering · Unknown or other
Vehicle Steering Lock Malfunction - Car does not start and stuck in Park. Cannot move steering wheel which is locked. This is a design defect that needs to be addressed. Vehicle is rendered inoperative! Cannot move or start it! approx. mileage 105k. This is a new problem besides the current…
Vehicle Steering Lock Malfunction - Car does not start and stuck in Park. Cannot move steering wheel which is locked. This is a design defect that needs to be addressed. Vehicle is rendered inoperative! Cannot move or start it! approx. mileage 105k. This is a new problem besides the current recall which has not been available yet. I've also been locked out of this vehicle and had to climb out of the window, thank God it was not a fire or flood! I was able to fix that problem myself. note: Steering Lock Malfunction is a widespread problem! Dealers want to replace the entire steering column in these cases at a very high cost. Thanks, [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Air bags · Air bags › Sensor › Occupant classification › Front passenger
The contact owns a 2006 BMW 325i. The contact stated that the front air bag and seat belt passenger sensor functionality were defective. No warning lights were illuminated. The vehicle was taken to the dealer and no cause for the failure was determined. The vehicle was not repaired. The…
The contact owns a 2006 BMW 325i. The contact stated that the front air bag and seat belt passenger sensor functionality were defective. No warning lights were illuminated. The vehicle was taken to the dealer and no cause for the failure was determined. The vehicle was not repaired. The manufacturer was not notified of the failure. The VIN was not included in NHTSA Campaign Number: 13V564000 (Air Bags). The approximate failure mileage was 150,000.
- Engine and engine cooling
The contact owns a 2006 BMW 325I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The…
The contact owns a 2006 BMW 325I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- BMW airbag light illumination
BMW IS conducting a safety recall campaign on approximately 200,000 MY04 through MY06 subject vehicles built through 11/30/05 to correct the front passenger seat air bag occupant detection mat. The specific vehicles included in the recall aremy04- 06/ 5-series with standard and sport seats, my04-06/ x3-series and…
BMW IS conducting a safety recall campaign on approximately 200,000 MY04 through MY06 subject vehicles built through 11/30/05 to correct the front passenger seat air bag occupant detection mat. The specific vehicles included in the recall aremy04- 06/ 5-series with standard and sport seats, my04-06/ x3-series and MY06/ 3-series with sport seats. In addition, BMW will extend the warranty coverage of the passenger seat air bag occupant detection mat to 10-year/unlimited mileage on approximately 120,000 remaining my04-06 subject vehicles built through 11/30/05. The specific vehicles included in the extended warranty are my 06/ 6 series, my 06/ 3-series with standard seats, my04-05/ Z4, my04-06/ 7 series, my 06/ X5, and my04-06/ 5-series with comfort seats.the average frequency of failures among the extended warranty groups was less than 1/7TH of the recall vehicle groups.please see bmw's 08v-384 recall notification for further detailsdepending on seat configuration and vehicle geometry, the occupant detection mat can fatigue during use depending on the manner and frequency of the front passenger's entry and exit.specifically, over time, micro-cracks could develop in the side flanks of the mat causing a broken circuit.a brokencircuit can lead to the deactivation of the passenger air bag and the illumination of both the air bag warning light and the passenger air bag light.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249437The basic conditions for initializing the power windows are not met.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10194296Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.
- 10182619Discharged Battery Energy Diagnosis Must Be Performed: The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle "discharged battery" complaints. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion, with all results taken into consideration. Without performing the energy diagnosis test plan, the root cause of the discharged battery cannot be identified. This increases the chances of a repeat repair.
- 10181214Power Reduction, FC2A82 Intake VANOS and/or FC2A87 Exhaust VANOS Camshaft Fault: The ?Service Engine Soon? (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If theignition is cycled, the engine then usually performs normally.
- 10175267Power Reduction FC2A82 Intake VANOS and/or FC2 A87 Exhaust VANOS Camshaft Fault: The "Service Engine Soon" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled the engine then usually performs normally.
- 10162431"Erroneous CC Message "Remote control! Do not switch off the engine" is Displayed. An erroneous CC message, "Remote control!" " Do not switch off the engine" is displayed in the Central Information Display (CID). The engine can still be started, even with the CC message displayed. CAUSE: Car Access System (CAS) software error"
- 10162426Trunk Lid Intermittently Does Not Open or Latch. Intermittently the trunk lid does not pop open when using the remote, or latch when closing. If the vehicle is driven and the trunk is not closed fully, a Check Control message will be displayed in the instrument cluster. CAUSE: The trunk lid is out of tolerance. When opening or closing the trunk lid, the latch rubs against the striker because of insufficient clearance.
- 10162416"Power Reduction, FC 2A82 Intake VANOS and/or FC 2A87 Exhaust VANOS Camshaft Faults are Stored in DME. The ""Service Engine Soon"" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled, the engine then usually performs normally. The following faults are stored in the DME: * 2A82 VANOS intake - stiff; jammed mechanically * 2A87 VANOS exhaust - stiff; jammed mechanically * 130108 VANOS intake: control fault, position not reached * 130308 VANOS exhaust: control fault, position not reached For the N54 engine, the following secondary faults may also be stored: * 120408 Charge-air pressure control, cut-out: Boost pressure accumulation blocked * 3100 Boost-pressure control, deactivation - boost-pressure buildup prohibited CAUSE The VANOS faults can be caused by an insufficient oil pressure supply to the inlet VANOS adjustment unit. To effectively move the camshafts to the target positions in the specified time and under all engine conditions, sufficient oil pressure supply to the VANOS control pistons must always be available. If engine operation requires the VANOS system to quickly advance or retard the intake or exhaust camshaft, faults may be stored if the camshaft is ""late"", or does not reach the target position. In this situation, engine power may be reduced and a check control message is displayed. The consequential fault 3100 or 120408 can also be set in the DME fault memory as well."
- 10162406Power Mirrors and/or Windows are Inoperative. The power windows and/or power mirrors are inoperative. The LED on the headlight switch is flashing. There is a check control message for Windows/Mirrors/ Headlights. There may also be a complaint of water in one or both headlights. One of the following fault codes may be stored: * 9CBD - Communication with stepper motor box left defective * 9CBE - Communication with stepper motor box right defective * 9CC1 - Communication with mirror driver side defective * 9CC2 - Communication with mirror passenger side defective/Right Stepper Motor Controller (SMC) signaling fault * 9CCF - Communication with LIN control defective Left and/or right headlight housing cover is not properly fitted allowing water ingress into the Stepper Motor Controller (SMC) connector. CAUSE: Left and/or right headlight housing cover is not properly fitted allowing water ingress into the Stepper Motor Controller (SMC) connector.
- 10162404"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Follow the diagnosis test plan using the latest ISTA version. In Information Search, select the "Function Structure"" tab. Select Body, Mirror, Door mirror, Driver's or passenger side, Exterior Mirror Malfunction, and then press "Start Search". Select test plan ""AM5102_00010".
- 10162395N55 Engine: Various Faults Stored in DME Related to VANOS and Camshaft Position. A rattling noise can be heard from the engine compartment; the engine has a loss of power; and the Service Engine Soon lamp is illuminated. One or more of the following faults may be stored. E70, E71, E82, E88, E90, E92 and E93: 2D5A - VANOS, intake: control fault, camshaft sticking 2D5B - VANOS, intake: control fault, position not reached 2D60 - VANOS, exhaust: control fault, camshaft sticking 2D61 - VANOS, exhaust: control fault, position not reached 2D9F - camshaft input sensor: signal implausible 2DA1 - Camshaft exhaust sensor: signal implausible 300C - Camshaft input sensor: signal high 300D - Camshaft input sensor: signal low 300E - Camshaft exhaust sensor: signal high 300F - Camshaft exhaust sensor: signal low F07, F10, F12, F13 and F25: 130104 - VANOS, intake: control fault, camshaft sticking 130108 - VANOS, intake: control fault, position not reached 130304 - VANOS, exhaust: control fault, camshaft sticking 130308 - VANOS, exhaust: control fault, position not reached 130E11 - Camshaft input sensor: signal implausible 130F11 - Camshaft exhaust sensor: signal implausible 164020 - Camshaft input sensor: signal high 164021 - Camshaft input sensor: signal low 164030 - Camshaft exhaust sensor: signal high 164031 - Camshaft exhaust sensor: signal low CAUSE One or both (intake and/or exhaust) of the VANOS gear assemblies have failed; the attaching bolts may have also loosened and/or broken.
- 10160287TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10160244TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10154816In an effort to improve the completion rate on Takata air bag recall affected vehicles; BMW NA has expanded the BMW Ultimate Rewards platform to include a new Recall Support page. This page will allow IRFs to check their customers VINs for open Takata recalls; and get rewarded for helping us with completing repairs.
- 10153726Takata class action settlement. Customer support program. Front driver side airbag modules.
- 10152314Door Open Message Displayed, Even Though Door Is Closed. The customer complains that while driving, a CCM (check control message) indicates the doors are open, even though they are closed. Also, sometimes the gong will sound and the interior lights will go on and off. Unspecified FRM door lock status due to voltage variations
- 10151335Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware.
- 10151323ELV Does Not Release. The customer complains of a no-crank, no-start situation. The condition may be intermittent. The ELV (Electric Steering Lock) warning is shown in the Instrument Cluster.
- 10151300N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints This Service Information bulletin and attachment supersedes SI B11 06 16 dated April 2016.. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
- 10151255ISTA/P Cannot Program an E-Series N55 Replacement DME. ISTA/P fails when attempting to program a replacement DME (MEVD172) on BN2000 E-Series vehicles with the Continental HPP. Part number: 12 14 8 618 483. DME logistic error between the replacement hardware and basic software prevents correct programming with ISTA/P.
- 10151247N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
- 10151170N51 Engine: Service Engine Soon Lamp Illuminated - Loss of Power and Various Faults Stored in the DME. The customer complains that the Service Engine Soon lamp is illuminated. The vehicle has lost power; the engine cranks but will not start; and various faults are stored in the DME for engine misfire and/or mixture adaptations. CAUSE The vehicle has lost fuel system delivery pressure due to a loose or split fuel line inside the fuel tank. The failure is related to an unfavorable stacking of tolerances between the rubber fuel hose and the plastic regulator nipple or deterioration of the rubber hose construction material.
- 10151079SI B13 03 15 February 2016 Fuel Systems Technical Service This Service Information bulletin supersedes SI B13 03 15 dated March 2015 and replaces SI B13 04 13 dated March 2014. SUBJECT N20, N26, N55, N63TU, S63TU and S55 Engines: Bosch Injector ETK Part Number Error. The current version of the ETK incorporates multiple part number errors for the Bosch type injectors. Ordering the injectors by VIN number or manual identification in ETK may result in an incorrect part number.
- 10151068This Service Information bulletin supersedes SI B07 03 14 dated October 2015. Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Fault codes stored in vehicles being serviced are not being diagnosed, leading to repeat repair visits (source- Analysis of FASTA data and repeat repair visit reports). INFORMATION Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) to find their root cause during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
- 10151028"This Service Information bulletin supersedes SI B65 69 06 dated June 2008. designates changes to this revision SUBJECT Airbag Warning Lamp Illuminated, FC 93EB or FC 55 . The red airbag warning lamp (AWL) in the instrument cluster is illuminated and a fault code for ""Emergency call function..."" is stored in the MRS5 (Multiple Restraint System) control module. The fault code is FC 93EB for the E90 and E91 or FC 55 for the X3. The fault occurs regardless of whether the vehicle has a TCU (Telematics Control Unit) or not. Internal varistor fault within the MRS control module."
- 10151023Whistling Noise Coming from the Center Vent - A/C is Off . A very high pitched whistling or beeping noise is heard coming from the center vents. The flow of refrigerant through the expansion valve at certain temperature differentials.
- 10150385"CCC - ""Please Insert Navigation DVD"" Appears on CID. The navigation map DVD cannot be read or detected. The message ""Please insert navigation DVD"" appears in the CID (Central Information Display). The navigation system is inoperative. This situation may also occur when upgrading to a new navigation map. The old map is recognized but the new one is not. CAUSE Faulty DVD drive; read error due to hardening of the anti-vibration gel on the read head"
- 10150381Junction Box Pin Assignment Change. When replacing the Junction Box (fuse box) using P/N 61 14 6 978 270 or later, note that various pin assignments have changed. The following additional work procedure is necessary to properly perform this repair.
- 10150365"N51, N52K and N52T: Idle Fluctuation During Engine Warm-up Phase. After a cold engine start, the idle speed may be unstable or start fluctuating up and down slightly while the vehicle is stopped. On vehicles with automatic transmissions, roughness or shuddering may be felt during this warm-up period when diving away slowly in ""D"" or in ""R"" without depressing the accelerator pedal. No relevant errors are stored in the DME fault code memory, and these symptoms are no longer present once the engine is at operating temperature (> 90C). Unfavorable DME software"
- 10150330"Discharged Battery: Energy Diagnosis Must Be Performed. The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle ""discharged battery"" complaints. A discharged battery can have various causes, most of which do not concern the battery itself. A failed battery is often the symptom and not the cause. A fully serviceable battery fails when an electrical component causes the battery to discharge; the battery becomes internally damaged and must be replaced. For more information, refer to www.batteryuniversity.com/parttwo-42B.htm For this reason, replacing the battery is not usually a permanent repair. The cause of the discharged battery must be analyzed in order to guarantee a proper repair. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion with all results taken into to consideration. The procedure as outlined below contains information that will guide the technician into properly repairing the vehicle and getting paid for a warranty claim. CAUSE Refer to the ""Procedure"" section of this Service Information for details."
- 10150329Intermittently the trunk lid does not pop open when using the remote, or latch when closing. If the vehicle is driven and the trunk is not closed fully, a Check Control message will be displayed in the instrument cluster. CAUSE The trunk lid is out of tolerance. When opening or closing the trunk lid, the latch rubs against the striker because of insufficient clearance.
- 10150324?SI B51 15 08 Body Equipment October 2012 Technical Service. This Service Information bulletin supersedes SI B51 15 08 dated July 2008. designates changes to this revision SUBJECT Rear Window False Anti-trap Activation. INFORMATION The anti-trap protection feature may be activated when no obstruction is present. This may occur at either one or both of the rear windows. The root cause of the false anti-trap activation may be difficult to determine. The attached diagnosis flowchart has been developed to assist with determining the actual root cause of the failure as well as to help prevent unnecessary part replacements. The root cause is typically either an issue with the window system, or an electrical/software issue. The diagnosis flowchart will help ensure that repairs are only carried out for the system that is most likely at fault. Refer to B511508_Attachment. PARTS INFORMATION Refer to the Electronic Parts Catalog (EPC) for the appropriate parts noted in the diagnostic flowchart. WARRANTY INFORMATION Not applicable.
- 10150265Intermittently Stored FM Radio Stations Default to FM 87.7. Intermittently, the stored FM radio stations default to FM 87.7 after vehicle start-up. CAUSE 1. Low battery voltage or voltage drop at the head unit 2. Radio station preset contains FM 87.7 3. Remote key memory not set correctly or the setting is lost
- 10150264"The replacement OC3 seat mat (front passenger seat occupancy) will not enable when following ISTA Repair Instruction REP 65 77 604, ""Replacing sensor mat (OC3 mat) for passenger seat occupancy detector."" 1. When the new mat is installed in the vehicle, too much pre-load pressure will prevent the mat from being enabled. ISTA/P WILL NOT enable the new part, and will cause permanent damage to it. 2. The new part has incorrect coding."
- 10150224"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Complete the diagnosis test plan using the latest ISTA version. The test plan can be accessed via the following path: ""Information Search / Function Structure / Body / Mirror / Exterior mirrors / Driver's or passenger side / Electrochromic Mirror,"" and then press ""Start Search."" Select the test plan ""AM5102_00010."""
- 10150173"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Complete the diagnosis test plan using the latest ISTA version. The test plan can be accessed via the following path: ""Information Search / Function Structure / Body / Mirror / Exterior mirrors / Driver's or passenger side / Exterior Mirror https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/15...12/6/2013 Page 2 of 2 Malfunction,"" and then press ""Start Search."" Select the test plan ""AM5102_00010."""
- 10150133In all audio modes (radio, CD, AUX-In, etc.), the audio output is distorted. It is more noticeable with high bass and high audio volume settings. There may also be an intermittent interference noise coming from the loudspeakers at low audio volume or when the radio is turned off. Audio settings in the RAD2+ (radio professional)
- 10150131"Enabling and Replacing New OC3 Seat Mat. The replacement OC3 seat mat (front passenger seat occupancy) will not enable when following ISTA Repair Instruction REP 65 77 604, ""Replacing sensor mat (OC3 mat) for passenger seat occupancy detector."" When the new mat is installed in the vehicle, too much pre-load pressure will prevent the mat from being enabled. ISTA/P WILL NOT enable the new part, and will cause permanent damage to it."
- 10150130The vehicle position is missing or incorrect on the navigation map. The navigation system integrated in the Car Information Computer (CIC) is not calibrated correctly.
Every BMW 325I model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.