2010 BMW 528I

Recalls

2 recalls name the 2010 BMW 528I. Newest first.

• Engine and engine cooling › Exhaust system › Emission control › Crankcase (pcv)

  Oct 30, 2017NHTSA 17V683000740,561 vehicles

  BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.

  Risk and remedy

  Risk

  An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.

  Remedy

  BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1-800-525-7417.

  Full recall details →

• Exterior lighting › Tail lights

  Sep 11, 2013NHTSA 13V407000134,100 vehicles

  BMW is recalling certain model year 2008 through 2010 528i, 535i, 550i, and M5 passenger cars manufactured from March 1, 2007, through December 31, 2009. Over time, increased resistance at the taillight electrical contact points may cause damage to the ground terminal and housing of the connector resulting in an intermittent or permanent loss of…

  Risk and remedy

  Risk

  Intermittent light operation reduces the ability to warn other motorists of the driver's intentions, increasing the risk of a crash.

  Remedy

  BMW will notify owners, and dealers will replace the rear lamp bulb carriers free of charge. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.

  Full recall details →

Owner complaints

What owners report most

1. Engine and engine cooling17
2. Engine16
3. Electrical system11
4. Air bags9
5. Power train9
6. Fuel/propulsion system6
7. Exterior lighting4
8. Seat belts3
9. Unknown or other3
10. Seats2

Latest complaints

• Dec 22, 2025SC145,000 mi
  Engine and engine cooling
  The contact owns a 2010 BMW 528I. The contact stated that the vehicle was repaired under NHTSA Campaign: 23V707000 (Engine and Engine Cooling); however, the repair failed to prevent a failure. The contact stated that while attempting to start the vehicle, there was an abnormally loud rattling sound…

  The contact owns a 2010 BMW 528I. The contact stated that the vehicle was repaired under NHTSA Campaign: 23V707000 (Engine and Engine Cooling); however, the repair failed to prevent a failure. The contact stated that while attempting to start the vehicle, there was an abnormally loud rattling sound coming from under the hood. The check engine warning light was illuminated. The contact stated that while driving at an undisclosed speed in Manual Mode, the vehicle independently shifted to neutral(N), the steering wheel became firm, and the transmission failed to shift out of neutral. In addition, the contact stated that while attempting to accelerate from a stop, the vehicle hesitated while accelerating with the accelerator pedal depressed. The contact stated that the vehicle was towed back to the same local dealer on various occasions; however, the failure reoccurred. The manufacturer was not made aware of the failure. The failure mileage was approximately 145,000.

• Jul 21, 2025FL
  Electrical system

  insulation on wiring is deteriorated leading to possible fire and or shorting out of electrical system

• Apr 21, 2025CO124,000 mi
  Engine and engine cooling
  The contact owns a 2010 BMW 528I. The contact stated while making a left turn and depressing the brake pedal, the vehicle failed to respond as needed. The brake and transmission warning lights illuminated. A dealer was contacted. The contact pulled over to the side of the road, turned off the…

  The contact owns a 2010 BMW 528I. The contact stated while making a left turn and depressing the brake pedal, the vehicle failed to respond as needed. The brake and transmission warning lights illuminated. A dealer was contacted. The contact pulled over to the side of the road, turned off the vehicle, and then attempted to restart the vehicle; however, the vehicle failed to respond as intended and was towed back to the residence. The vehicle was next towed to an independent mechanic, where it was diagnosed and determined that the camshaft and timing belt chain needed to be replaced. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Numbers: 23V707000 (ENGINE AND ENGINE COOLING) and 22V119000 (ENGINE AND ENGINE COOLING); however, the parts to do the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue but offered no assistance. The failure mileage was 124,000.

• Mar 5, 2025FL
  Electrical system · Engine

  They lied to me made me buy a bad car and then didn't even give me a license plate of anything they stole my money

• Nov 21, 2024NY
  Engine
  I brought the car into BMW Manhattan after receiving the recall letter. They have refused to perfom the correction based on the fact that I had to replace the engine dues to a engine defect that cracked the number 6 cylinder in the original engine. I am confident BMW has the abilty to check the…

  I brought the car into BMW Manhattan after receiving the recall letter. They have refused to perfom the correction based on the fact that I had to replace the engine dues to a engine defect that cracked the number 6 cylinder in the original engine. I am confident BMW has the abilty to check the engine number and see that it requires the recall. They only stated it wasnt the original engine so they did not perform the work required by ther recall.

• Nov 1, 2024CA
  Fuel/propulsion system

  The car smells like gas by the rear wheels. In speaking with other owners of this vehicle this is a defective flaw in the vehicle it is a known problem in this vehicle and there has been no recall. This is a serious concern as gasoline is highly flammable. I have had to spend thousands of dollars fixing problems with this car and I cannot afford to fix this issue. This is a major concern. Please advise a fix ASAP

• Jun 24, 2024DE178,000 mi
  Engine and engine cooling
  The contact owns a 2010 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that the parts were not yet available. The contact stated…

  The contact owns a 2010 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that the parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact stated while driving at an undisclosed speed, the vehicle stall and jerked while coming to a stop. The check engine warning light was illuminated. The failure mileage was approximately 178,000. VIN tool confirms parts not available.

• Jun 6, 2024SC
  Unknown or other

  N/A Complaint is that no remedy is available 8 months after recall issued. Currently this particular car is still drivable, but suffers oil leaks from this lack of repair. No local dealer or repair shops can fix ahead of the recall because they cannot get the repair bolts either. Eight months is a ridiculous amount of time to wait for a manufacture repair.

• Apr 2, 2024LA
  Engine · Fuel system, gasoline
  The contact owns a 2010 BMW 528I. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated and flashed. The vehicle was towed to the dealer where it was diagnosed that fuel was leaking form the engine. The contact was unaware of what part needed to…

  The contact owns a 2010 BMW 528I. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated and flashed. The vehicle was towed to the dealer where it was diagnosed that fuel was leaking form the engine. The contact was unaware of what part needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was unknown.

• Jan 24, 2024NY160,000 mi
  Engine and engine cooling
  The contact owns a 2010 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…

  The contact owns a 2010 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at an undisclosed speed, the vehicle lost motive power. The vehicle was taken to a local dealer, where it was diagnosed that the VANOS bolts needed to be replaced. The vehicle was not repaired. The dealer was made aware of the failure but confirmed that parts were not yet available. The manufacturer was made aware of the failure. The failure mileage was approximately 160,000. VIN tool confirms parts not available.

• Jan 11, 2024NV
  Power train

  When driving any acceleration will cause the car to shift from Drive to Neutral. This can happen under normal driving conditions and at any speed.

• Dec 28, 2023FL
  Engine and engine cooling
  The contact owns a 2010 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…

  The contact owns a 2010 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

• Dec 26, 2023TX100,000 mi
  Engine and engine cooling
  The contact owns a 2010 BMW 528I. The contact stated that while driving at approximately 45 MPH, the vehicle stalled. The driver was able to coast off the roadway. While at a stop, the vehicle stalled upon acceleration. Upon starting the vehicle, the vehicle started to shake. There were no warning…

  The contact owns a 2010 BMW 528I. The contact stated that while driving at approximately 45 MPH, the vehicle stalled. The driver was able to coast off the roadway. While at a stop, the vehicle stalled upon acceleration. Upon starting the vehicle, the vehicle started to shake. There were no warning lights illuminated. The vehicle was taken to an independent mechanic, and the contact was referred to the local dealer. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. VIN tool confirms parts not available. The approximate failure mileage was 100,000.

• Dec 3, 2023GA
  Engine

  Camshaft over retarded. Stalled while driving.

• Nov 29, 2023CA132,553 mi
  Engine and engine cooling
  The contact owns a 2010 BMW 528I. The contact stated that upon starting the vehicle, there was an abnormal knocking sound coming from the vehicle. There were no warning lights illuminated. The contact continued driving at an unknown speed and then parked and had the vehicle towed to the residence.…

  The contact owns a 2010 BMW 528I. The contact stated that upon starting the vehicle, there was an abnormal knocking sound coming from the vehicle. There were no warning lights illuminated. The contact continued driving at an unknown speed and then parked and had the vehicle towed to the residence. The vehicle was then towed to the local dealer, where it was diagnosed and determined that the engine needed to be replaced. The contact was informed that there was debris in the filter. The vehicle was not repaired. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 132,553. The contact stated when he took his wife’s car for an oil service at the BMW dealership he was told that there was a VANOS Unit recall much to his surprise. However the VANOS Unit recall did not include all 2010 528i BMW’s. The contact is requesting this vehicle to be included in the recall.

• Oct 21, 2023NJ
  Air bags · Electrical system

  There seems to be a common problem with these vehicles according to similar complaints being discussed in forums. My steering wheel is malfunctioning and creating a safety concern. While driving straight my horn and electrical controls do not function. If I turn the steering wheel to one side then the horn and electrical components work. I am also afraid that the airbag may not function properly because of this.

• Aug 16, 2023CA
  Engine

  Bolts on the backside of the camshaft adjusters broke off and went into the engine.

• Apr 21, 2023CACrash1 injury
  Air bags

  i was in a rear end crash accident my fault fast airbag didn’t deploy significant damage to my face car was totaled

• Dec 17, 2022NJ
  Engine

  This recall notice received almost 8 months back. This recall concerns me. I didn’t have any accidents to report but it’s too bad no remedy was given by BMW.

• Dec 8, 2022NJ
  Engine and engine cooling
  The contact owns a 2010 BMW 528I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling). The contact stated that after she scheduled an appointment at the local dealer, she was later made aware that parts were not yet available. The contact stated that…

  The contact owns a 2010 BMW 528I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling). The contact stated that after she scheduled an appointment at the local dealer, she was later made aware that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

• Dec 5, 2022CA100,000 mi
  Engine and engine cooling
  The contact owns a 2010 BMW 528I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount time for the recall repair.…

  The contact owns a 2010 BMW 528I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount time for the recall repair. The contact stated that while driving at an undisclosed speed, he attempted to operate the heater and noticed a fuel odor inside the vehicle. The contact then stated that smoke was coming from under the hood. There was no warning light illuminated. The vehicle was towed to the dealer but was not diagnosed. The contact was informed that parts were not available for the recall repair. The manufacturer was not notified of the failure. The contact stated that he noticed a fuel odor throughout the vehicle. The failure mileage was approximately 100,000. VIN tool confirms parts not available.

• Nov 13, 2022NJ
  Electrical system · Power train · Steering

  The "Secure from Rolling" alert pops up on screen and car is prevented from moving. Engine must be shut off and ignition turned back on to work. Gears/spring probably need replaced per error message.

• Sep 27, 2022CA132,000 mi
  Engine
  The contact owns a 2010 BMW 528I. The contact stated that the vehicle was experiencing rough starts and the failure persisted while driving. The vehicle was taken to the dealer where it was diagnosed that the motor mounts had collapsed and needed to be replaced. Additionally, the oil pan gasket was…

  The contact owns a 2010 BMW 528I. The contact stated that the vehicle was experiencing rough starts and the failure persisted while driving. The vehicle was taken to the dealer where it was diagnosed that the motor mounts had collapsed and needed to be replaced. Additionally, the oil pan gasket was leaking and needed to be replaced. The contact was also informed that the fuel sending unit needed to be replaced due to a fuel leak. The parts were replaced; however, upon replacing the oil pan gasket, the dealer noticed fragments of vanos adjuster units bolts used to fasten the intake and exhaust camshaft inside the oil pan. The dealer informed the contact that the cylinder head cover needed to be taken apart to verify whether the motor mounts were fractured. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 132,000. Manufacturer Safety recall issued NHTSA #22V-119 Recall #22V-119:407 POSITIVE CRANKCASE VENTILATION (PCV) VALVE HEATER Status: Remedy Available

• Aug 25, 2022NJ
  Engine and engine cooling
  The contact owns a 2010 BMW 528I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…

  The contact owns a 2010 BMW 528I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

• Aug 1, 2022CA90,000 mi
  Engine and engine cooling
  The contact owns a 2010 BMW 528I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The dealer was made aware of the issue and confirmed that parts were not yet available. The…

  The contact owns a 2010 BMW 528I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue. The contact stated that while driving at various speeds, an abnormal whistling sound was coming from the vehicle. The contact stated that the RPM was fluctuating. There was no warning light illuminated. The contact stated the vehicle started vibrating as if it was going to stall. There was no warning light illuminated. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 90,000. VIN tool confirms parts not available.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10249437The basic conditions for initializing the power windows are not met.
• 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
• 10247567Engine will crank but not start. There is no communication with the integrated fuel module (TFE) whendiagnosing with ISTA. The following two fault codes will be stored in the DME: 032B43 - Low fuel pressure system, electric fuel pump: pressure value too low CDA594 - Message (- 0x33E) missing, receiver DME, transmitter TFE
• 10245422Customers may state that the alarm system (DWA) is not active after locking their unoccupied vehicle. Depending on the vehicles equipment and settings, no acoustic or optical confirmation (folding the mirrors/blinking confirmation) is noticeable. Additionally, the red anti-theft alarm LED in the interior mirror does not briefly flash every 2 seconds, indicating the alarm is armed.
• 10194296Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.
• 10182619Discharged Battery Energy Diagnosis Must Be Performed: The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle "discharged battery" complaints. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion, with all results taken into consideration. Without performing the energy diagnosis test plan, the root cause of the discharged battery cannot be identified. This increases the chances of a repeat repair.
• 10181214Power Reduction, FC2A82 Intake VANOS and/or FC2A87 Exhaust VANOS Camshaft Fault: The ?Service Engine Soon? (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If theignition is cycled, the engine then usually performs normally.
• 10175267Power Reduction FC2A82 Intake VANOS and/or FC2 A87 Exhaust VANOS Camshaft Fault: The "Service Engine Soon" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled the engine then usually performs normally.
• 10162457Radio and Air Conditioning Functions Inoperative, When Vehicle is Moving. All audio and heating/air conditioning functions cannot be controlled when the vehicle is moving. After the vehicle is turned off and has entered sleep mode (after approximately 30 minutes), the system operates normally. CAUSE: Software error in the audio and air conditioning control panel.
• 10162428Various Electrical Problems Caused by Water Ingress. Water ingress into the luggage compartment may cause various electrical problems or faults associated with the MPM (Micro Power Module); PDC (Park Distance Control); M-ASK (Multi-Audio System Controller); CCC (Car Communication Computer); CID (Control Information Display); TCU (Telematics Control Unit); LOGIC-7 (Top Hi-Fi); RDC (Tire Pressure Monitor) or SDARS (Satellite Radio Receiver) control modules. In most cases, the water collects in the spare wheel recess. CAUSE: Insufficient sealing may allow water to enter the luggage compartment due to the vacuum generated while driving.
• 10162416"Power Reduction, FC 2A82 Intake VANOS and/or FC 2A87 Exhaust VANOS Camshaft Faults are Stored in DME. The ""Service Engine Soon"" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled, the engine then usually performs normally. The following faults are stored in the DME: * 2A82 VANOS intake - stiff; jammed mechanically * 2A87 VANOS exhaust - stiff; jammed mechanically * 130108 VANOS intake: control fault, position not reached * 130308 VANOS exhaust: control fault, position not reached For the N54 engine, the following secondary faults may also be stored: * 120408 Charge-air pressure control, cut-out: Boost pressure accumulation blocked * 3100 Boost-pressure control, deactivation - boost-pressure buildup prohibited CAUSE The VANOS faults can be caused by an insufficient oil pressure supply to the inlet VANOS adjustment unit. To effectively move the camshafts to the target positions in the specified time and under all engine conditions, sufficient oil pressure supply to the VANOS control pistons must always be available. If engine operation requires the VANOS system to quickly advance or retard the intake or exhaust camshaft, faults may be stored if the camshaft is ""late"", or does not reach the target position. In this situation, engine power may be reduced and a check control message is displayed. The consequential fault 3100 or 120408 can also be set in the DME fault memory as well."
• 10152289"?CLASS ACTION LAW SUIT SETTLEMENT: WATER INTRUSION AND ACCUMULATION IN THE TRUNK (E60)/REAR CABIN WELL AREA (E61). INFORMATION BMW of North America, LLC (?BMW NA?) is has entered into a court approved ?nationwide settlement? with this Class Action?s lawsuit plaintiffs. Class Allegations In their complaint, the plaintiffs allege that:Model Year 2004 to 2010 BMW 5 Series E60 (Sedans) and Model Year 2006 to 2010 E61 (Sport Wagons) vehicles (""Preliminary Class Vehicles"") have defectively designed sunroofs drains which, if they become clogged, causes water intrusion and accumulation in the trunk/rear cabin well area of these vehicles. As a result, over time, this can potentially damage the electrical components and wiring that is located in the lowest part of the well area. Final Settlement Class Vehicles US specification Model Year 2007 to 2010 BMW 5 Series E60 (Sedans) and E61 (Sport Wagons) vehicles (""Final Settlement Class Vehicles"") registered and operated in the US (including Puerto Rico). Cass Members US residents (including Puerto Rico) who purchased or leased a Class Vehicle. Settlement Terms for Final Settlement Class Vehicles For eligible vehicles, the free inspection is available one-time (repair/claim dates) beginning on 8/28/2017 but no later than the extended date of 11/21/2018, Class Members will be permitted to bring their Class Vehicle to an authorized BMW center to have the free one-time inspection and control module relocation procedure performed. SI B01 28 17 (DC 54 12 90 01 00) CLASS ACTION LAWSUIT SETTLEMENT: WATER INTRUSION AND ACCUMULATION IN THE TRUNK (E60)/REAR CABIN WELL (E61) AREA, MAY APPLY. FOR ELIGIBLE VEHICLES, AN INSPECTION AND APPLICABLE CORRESPONDING REPAIRS ARE AVAILABLE ONE-TIME (REPAIR/CLAIM DATES) BEGINNING ON 8/28/2017 BUT NO LATER THAN THE EXTENDED DATE OF 11/21/2018. CLASS ACTION LAWSUIT SETTLEMENT: WATER INTRUSION AND ACCUMULATION IN THE TRUNK (E60)/REAR CABIN WELL (E61) AREA, SERVICE INFORMATION BULLETIN SI
• 10151335Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware.
• 10151300N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints This Service Information bulletin and attachment supersedes SI B11 06 16 dated April 2016.. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
• 10151247N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
• 10151119SI B84 03 14 February 2016 Communication Systems Technical Service This Service Information bulletin supersedes SI B84 03 14 dated October 2014. SUBJECT Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures CAUSE Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware CORRECTOPM None available at this time. We are currently working with the device manufacturer on a solution.
• 10151115SUBJECT Audio System Speaker Testing. For audio system speaker testing there is a NED (Non Electrical Diagnosis) Test Plan available. CAUSE We previously recommended use of the Audio Test CD (ATC) from BMW. This CD has been discontinued.
• 10151068This Service Information bulletin supersedes SI B07 03 14 dated October 2015. Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Fault codes stored in vehicles being serviced are not being diagnosed, leading to repeat repair visits (source- Analysis of FASTA data and repeat repair visit reports). INFORMATION Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) to find their root cause during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
• 10151023Whistling Noise Coming from the Center Vent - A/C is Off . A very high pitched whistling or beeping noise is heard coming from the center vents. The flow of refrigerant through the expansion valve at certain temperature differentials.
• 10150385"CCC - ""Please Insert Navigation DVD"" Appears on CID. The navigation map DVD cannot be read or detected. The message ""Please insert navigation DVD"" appears in the CID (Central Information Display). The navigation system is inoperative. This situation may also occur when upgrading to a new navigation map. The old map is recognized but the new one is not. CAUSE Faulty DVD drive; read error due to hardening of the anti-vibration gel on the read head"
• 10150330"Discharged Battery: Energy Diagnosis Must Be Performed. The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle ""discharged battery"" complaints. A discharged battery can have various causes, most of which do not concern the battery itself. A failed battery is often the symptom and not the cause. A fully serviceable battery fails when an electrical component causes the battery to discharge; the battery becomes internally damaged and must be replaced. For more information, refer to www.batteryuniversity.com/parttwo-42B.htm For this reason, replacing the battery is not usually a permanent repair. The cause of the discharged battery must be analyzed in order to guarantee a proper repair. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion with all results taken into to consideration. The procedure as outlined below contains information that will guide the technician into properly repairing the vehicle and getting paid for a warranty claim. CAUSE Refer to the ""Procedure"" section of this Service Information for details."
• 10150130The vehicle position is missing or incorrect on the navigation map. The navigation system integrated in the Car Information Computer (CIC) is not calibrated correctly.
• 10150099N54 Engine: Fuel Pressure Control Test Plan Error. INFORMATION Not applicable.
• 10150065"BMW NA has agreed to extend the emissions warranties of the turbocharger's wastegate to: ??8 years or 82,000 miles, whichever occurs first, as determined from the vehicle's original in-service date select the ""Vehicle Comment"" button to display the extended coverage information. The terms of the original New Vehicle/SAV Limited Warranty and applicable emissions warranty still apply. BMW NA will not provide warranty coverage to any Settlement Class Member's vehicle containing modifications or alterations to the turbocharger or its wastegates (software, hardware or otherwise), or evidencing other conditions not normally covered under the original New Vehicle/SAV Limited Warranty or applicable emissions warranty. Modifications excluded from warranty coverage include any aftermarket parts that affect the turbocharger system, or if there are other conditions that would normally exclude it from warranty coverage."
• 10149605Battery Replacements. A failed battery in the vehicle is being replaced with a battery of a different size and type, which can lead to additional labor to retrofit the differently sized battery. CAUSE In the past, the 110 AH Lead acid battery was not available. The 90/92 AH AGM battery was installed as an alternative replacement; this required retrofitting.
• 10149589"N54 Engine: Diagnosis of Cold Start Rough Running with Misfire Faults. The customer may complain that during the cold start in the morning, the engine runs very roughly and the Service Engine Soon lamp is illuminated. Various misfire fault codes (e.g., 29CC, 29D2, 29D1, 29D0, 29C0, 29CF) may be stored in the DME control module. The engine rough running complaint can be reproduced on a cold start in the workshop. During the course of diagnosis, the spark plugs, removed from the misfiring cylinders after the problem was reproduced, are found to be soaked (""wet"") with fuel, while the injector tips are covered with a layer of carbon deposit. Possible cause: high-pressure injector failure (leakage or incorrect spraying pattern) due to internal wear or unfavorable stock of tolerances IMPORTANT: For comprehensive N54 drivability diagnostics, always refer to the ""N54 Engine Diagnostic Fault Tree"" file (the current version ""02_14_13"" is found as a PDF attachment to SI B12 55 06)."
• 10149382iPhone: Connection Failures with iOS 7. There are various connectivity failures with the iPhone using iOS 7. Some examples are listed below: z Call disconnection z Contact List incomplete z General connection failures Apple software iOS 7 and its variants
• 10149279Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Analysis of FASTA data and repeat repair visit reports indicates that there are many fault codes that are stored in the above vehicles, but they are not diagnosed to identify their root cause. Fault codes that are not diagnosed to find their root cause can lead to a repeat repair visit to the workshop by the customer. Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
• 10148423Check Control Messages Related to Battery Charge During Cold Ambient Temperatures. On cold days with an outside ambient temperature of less than 15F, customers may notice a check control message related to the battery that is displayed on the instrument cluster and the control information display. Under these conditions, the vehicle starts. Various power management faults can be stored: z 213901 - Power management: Reduction or shutdown of individual electrical consumer z 8040BD - Reset or deactivation of Terminal 30F z 8040B9 - De-activation of terminal 30B: Top start capability limit reached z 8020E8 - Reset or deactivation of terminal 30F z 800E89 - FRM: start capability limit reached with lights active during stationary mode z 93076B - Deactivation of terminal 30B: upper start capability limit reached z 93076A - Deactivation of terminal 15: upper start capability limit reached, but deactivation preventer active z 93076C - Deactivation of terminal 30B: upper start capability limit reached, but deactivation preventer or legal loads active z 930769 - Deactivation of terminal 15: upper start capability limit reached Note: When the outside temperatures drop below 46F, the charging system is switch to full charge. CAUSE z The check control message (ID 229) is caused by a heavily discharged battery. z The check control message is triggered when the current state of charge (SoC) of the battery approaches the minimum SoC that is required to start the vehicle (start capability limit). z In low outside ambient temperatures, the start capability limit of the vehicle is higher. Therefore it takes more energy from the battery to start a cold engine. z Without the early warning of the check control message, the current state of charge would drop below the start capability limit and the vehicle would not start. z The vehicle's intelligent power management system actively takes measures to increase the charge of the battery, such as increasing idle speed and reducing or shutting
• 10148376Previously assigned radio channels to the satellite radio "Presets" list have been erased and radio channels selected from the list "All channels" menu cannot be stored in the "Presets" list. The problem occurred after the recently implemented Sirius/XM channel lineup change. The data handling between the satellite radio receiver (SDARS-Exbox) and the Car Communication Computer (CCC head unit) has been corrupted.
• 10148276Traffic Information Is Inoperative. The traffic information is intermittently or permanently inoperative. * Traffic flow is not displayed on the navigation map. * The traffic list is empty. 1. The Offboard Availability (backend) system is unavailable and is not sending traffic information. 2. The traffic information feature is not activated correctly.
• 10148273Check Control Messages Related to Battery Charge During Cold Ambient Temperatures. On cold days with an outside ambient temperature of less than 15F, customers may notice a check control message related to the battery that is displayed on the instrument cluster and the control information display. Under these conditions, the vehicle starts. Various power management faults can be stored: * 213901 - Power management: Reduction or shutdown of individual electrical consumer * 8040BD - Reset or deactivation of Terminal 30F * 8040B9 - De-activation of terminal 30B: Top start capability limit reached * 8020E8 - Reset or deactivation of terminal 30F * 800E89 - FRM: start capability limit reached with lights active during stationary mode * 93076B - Deactivation of terminal 30B: upper start capability limit reached * 93076A - Deactivation of terminal 15: upper start capability limit reached, but deactivation preventer active * 93076C - Deactivation of terminal 30B: upper start capability limit reached, but deactivation preventer or legal loads active * 930769 - Deactivation of terminal 15: upper start capability limit reached Note: When the outside temperatures drop below 46F, the charging system is switch to full charge. CAUSE * The check control message (ID 229) is caused by a heavily discharged battery. * The check control message is triggered when the current state of charge (SoC) of the battery approaches the minimum SoC that is required to start the vehicle (start capability limit). * In low outside ambient temperatures, the start capability limit of the vehicle is higher. Therefore it takes more energy from the battery to start a cold engine. * Without the early warning of the check control message, the current state of charge would drop below the start capability limit and the vehicle would not start. * The vehicle's intelligent power management system actively takes measures to increase the charge of the battery, such as increasing idle speed and reducing or shutting
• 10148194iPhone 6, 6 Plus, 5, 5S, 5C, 4S, 4, and 3GS with iOS 8.x Information. INFORMATION There is one major difference in functionality since iOS 8.0 was released. Scenario: z The customer leaves the vehicle and turns his or her phone off. z He or she turns the phone back on. z He or she enters the vehicle, but does not unlock the phone and start driving. Result: z The phone reconnects to the Bluetooth system (normal). z However, it does not transfer the contact list (not normal). z The contact list in the iDrive will be empty. z The call list in the Kombi will display only phone numbers, but no names. z The hands-free system works for accepting calls and conversing on calls started on the phone. Solution: z Prior to the customer entering the vehicle they must unlock the phone (passkey) With the release of Apple's new iPhone 6, 6 Plus and iOS 8.x software, there have been many questions regarding the new phone and software. The information in the attachment to this Service Information will help answer these questions. A printed copy can be given to the customer if needed. The attachment provides information on the differences between the new iPhone 6, 6 Plus and the previous versions, along with Apple software improvements in the following areas: 1. Visual comparison 2. Connectivity 3. Functionality Refer to the PDF file in the "Attachment" section of this bulletin for complete details. Information on the iPhone 6 is also available via the following: z www.bmwusa.com/bluetooth website NOTE: This SI will be updated as new information is received.
• 10148135ConnectedDrive/BMW Assist System Diagnosis Information. ConnectedDrive/BMW Assist features are partially or completely inoperative. This Service Information bulletin is being published because vehicles are down for an extended period of time when researching system failures with ConnectedDrive or BMW Assist. This Service Information bulletin will assist you both in identifying the issue and providing technical support. CAUSE Not enough information is available for BMW NA engineers to assist the technician in diagnosing the root cause.
• 10148120Check Control Messages Related to Battery Charge During Cold Ambient Temperatures. On cold days with an outside ambient temperature of less than 15F, customers may notice a check control message related to the battery that is displayed on the instrument cluster and the control information display. Under these conditions, the vehicle starts. Various power management faults can be stored: * 213901 - Power management: Reduction or shutdown of individual electrical consumer * 8040BD - Reset or deactivation of Terminal 30F * 8040B9 - De-activation of terminal 30B: Top start capability limit reached * 8020E8 - Reset or deactivation of terminal 30F * 800E89 - FRM: start capability limit reached with lights active during stationary mode * 93076B - Deactivation of terminal 30B: upper start capability limit reached * 93076A - Deactivation of terminal 15: upper start capability limit reached, but deactivation preventer active * 93076C - Deactivation of terminal 30B: upper start capability limit reached, but deactivation preventer or legal loads active * 930769 - Deactivation of terminal 15: upper start capability limit reached Note: When the outside temperatures drop below 46F, the charging system is switch to full charge. CAUSE * The check control message (ID 229) is caused by a heavily discharged battery. * The check control message is triggered when the current state of charge (SoC) of the battery approaches the minimum SoC that is required to start the vehicle (start capability limit). * In low outside ambient temperatures, the start capability limit of the vehicle is higher. Therefore it takes more energy from the battery to start a cold engine. * Without the early warning of the check control message, the current state of charge would drop below the start capability limit and the vehicle would not start. * The vehicle's intelligent power management system actively takes measures to increase the charge of the battery, such as increasing idle speed and reducing or shut
• 10148101iPhone: Connection Failures with iOS 7. There are various connectivity failures with the iPhone using iOS 7. Some examples are listed below: * Call disconnection * Contact List incomplete * General connection failures CAUSE Apple software iOS 7 and its variants.
• 10148087External Engine Oil Leaks and Repairs. During the vehicle's operational life, normal engine oil seepage or sweating, in addition to accumulated road dust, dirt and grime in the engine compartment can cause the appearance of a more severe oil leak. This is further exaggerated by residual oil that remains on the engine assembly after maintenance services are performed, e.g., oil filter changes, "engine oil top-offs," etc. If this visual appearance of accumulated oil on the engine assembly as an "active leak" is misinterpreted, unnecessary gasket repairs/replacements will result. Specifically, our analysis of the claim-related data for vehicles equipped with the engines noted in this bulletin is showing an above-average number of engine gasket repair/replacement claim submissions. The purpose of this bulletin is to provide your workshop with information and a procedure that will help in identifying engine oils leaks that do and do not require a repair.
• 10148034"Intelligent Battery Sensor Diagnosis Hints. The vehicle enters the workshop with one or more of the following complaints: * Check Control Message related to battery discharge * No-start condition * Consumer power reduction (reduced blower speed, heated seats operation, etc.) * The following fault codes may be stored in the DME a. 2E8B - Intelligent battery sensor, signal b. 2E8C - Intelligent battery sensor, function c. 2E8D - Intelligent battery sensor, signal transmission d. 2E8E - Intelligent battery sensor, communication CAUSE A faulty battery or IBS sensor (not both) The power management system and IBS in the vehicle cannot determine if the battery needs to be replaced. This is normal operation for all E-Series vehicles because they do not have the Advanced IBS sensor that the F-Series vehicles do. An external battery tester (Midtronics EXP-1000) must be used to determine if the battery needs to be replaced. Energy Diagnosis will not prompt for a battery replacement unless the battery is ""aged."" When energy diagnosis identifies the battery as ""aged,"" it means the amount of energy discharge over the course of the life of the battery has reached its maximum (worn out). In most cases, energy diagnosis states that the battery is OK. This is typically an indication of the current State of Charge (SoC), not the State of Health (SoH). The SoC is defined as the current amount of energy left in the battery (displayed as a percentage). The SoH is defined as an evaluation of the condition of the battery over a period of time (displayed as a percentage). For more information about batteries, refer to Training Manual ST051, ""07 Battery Basics."""
• 10148018"?SI B01 09 14 September 2014 WarrantiesWarranties This Service Information bulletin supersedes SI B01 09 14 dated August 2014. Please read this Service Information bulletin in its entirety, the content has been completely updated. designates changes to this revision SUBJECT Front Passenger Air Bag Seat Occupancy Sensor (OC3) Mat: Limited Warranty Extension to 15 years Without Mileage Limitation. INFORMATION BMW of North America, LLC (""BMW NA"") is extending the limited warranty for the Supplemental Restraint System's (SRS) front passenger air bag seat occupancy sensor (OC3) mat on certain model BMW vehicles to: 15 years without mileage limitation as determined by the vehicle's original in-service date. This ""component-specific"" limited warranty extension applies to defects in materials and workmanship. This bulletin is notice of a ""limited warranty extension."" This is NOT a notice of a Recall or Service Action. No immediate repair is required unless the BMW vehicle is currently experiencing this problem. This extended limited warranty coverage does not apply to vehicles affected by the following Recall Campaign: Recall 13V-564: E90, E91 Front Passenger Air Bag Seat Occupancy Sensor MatRecall 13V-564: E60, E61,E65, E66 Front Passenger Air Bag Seat Occupancy Sensor MatSI B65 08 14Recall Campaign 13V-564: Replace Front Passenger Air Bag Seat Occupancy Sensor (E60, E61, E65, E66)Recall 13V-564: E65,E66 Front Passenger Air Bag Seat Occupancy Sensor Mat (E65, E66)Recall 13V-564: Front Passenger Air Bag Seat Occupancy Sensor Mat for Sport Seat (E60, E61, E65, E66)Recall 13V-564: E53 Repair Front Passenger Air Bag Seat Occupancy Sensor MatThe extended limited warranty coverage also does not apply to: ??Vehicles with other seat options, and ??E60 (M5) vehicles Note: Please refer to SI B65 75 06 for the limited warranty extension information that applies to previous models. Customer Notification Letter - VIN and Component-specific Warranty Extension Even tho
• 10148010ConnectedDrive/BMW Assist System Information and Availability. ConnectedDrive features are partially or completely inoperative. Examples of some of these features are listed below: * BMW Assist Inoperative ? SOS call ? Roadside Assistance call * My BMW Remote App * BMW Online - Google local search * Concierge CAUSE The Electronic Subscriber Agreement (ESA) is inactive. * No active contract for ConnectedDrive features Offboard Availabilty (Backend) system issues * The external network was/is inoperative. * No data is sent to the vehicle.

Every BMW 528I model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.