2011 BMW 528I
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2011 BMW 528I. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2011 BMW 528I. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Risk and remedy
Risk
An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.
Remedy
BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2011 BMW 528i, 528xi, 535i, 535xi, 550i and 550xi vehicles manufactured March 1, 2010, through August 31, 2011. The affected vehicles may have received a replacement Sensor Cluster Unit (SCU) during a service visit. These SCUs have an acceleration sensor that may have been incorrectly…
Risk and remedy
Risk
Depending on the severity of the crash, inadequate activation of the driver and/or passenger air bags, safety belt pre-tensioners and active head restraints may increase the risk of injury.
Remedy
BMW will notify owners, and dealers will replace the SCU, free of charge. The recall began on December 16, 2016. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2007-2011 BMW X5 3.0si, X5 4.8i, X5 M, X5 xDrive30i, X5 xDrive35i, X5 xDrive48i and X5 xDrive50i, 2008-2011 X6 x Drive35i, X6 xDrive50i and X6 M, 2010-2011 X6 ActiveHybrid, 535i xDrive Gran Turismo, 535i Gran Turismo, 550i xDrive Gran Turismo and 550i Gran Turismo, 2011-2012 528i, 535i, 535i…
Risk and remedy
Risk
The loose wires may cause the connector to melt, resulting in a fuel leak. Additionally, the fuel pump may stop working, possibly causing an engine stall and increase the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the fuel pump module, free of charge. The recall began February 2017. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2010-2011 128i Coupe, 128i Convertible, 328i Sedan, 328i xDrive Sedan, 328i Coupe, 328i Convertible, 328i Sports Wagon and Z4 sDrive 30i, 2011-2012 135i Coupe, 135i Convertible, 335i Sedan, X5 xDrive 35i, and X6 xDrive 35i, 2011 335i xDrive Sedan, 335i Coupe, 335i Convertible, 528i Sedan, 535i…
Risk and remedy
Risk
If the bolts loosen or break the engine may have reduced power or stall. An engine stall increases the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the four VANOS housing bolts for both VANOS units (intake and exhaust), free of charge. In addition, owners of approximately 170,172 model year 2010-2012 BMW vehicles equipped with inline 6 cylinder engines not covered by this recall, will receive an extended warranty to address this condition. The recall began on September 24, 2014. Owners may contact BMW at 1-800-525-7417.
Owner complaints
118 complaints1 involved a crash1 involved a fire3 injuries
What owners report most
Latest complaints
- Electrical system · Engine · Unknown or other
1. Vanos Bolts recall. NHTSA Recall 23V-707. Cause the car the have a rough idle, check engine light, car to stall, and cut off in traffic all with seconds. Dealership says it was not the Vanos Bolts that cause the shutdown, but it is the DME and ICM. 2. The safety of myself and my 15 year old…
1. Vanos Bolts recall. NHTSA Recall 23V-707. Cause the car the have a rough idle, check engine light, car to stall, and cut off in traffic all with seconds. Dealership says it was not the Vanos Bolts that cause the shutdown, but it is the DME and ICM. 2. The safety of myself and my 15 year old daughter was at risk, along with the drivers on the highway. The car stopped in traffic, and would not release out of park to go in neutral. 3. State Trooper came to call a tow truck, the car was inspected by BMW of Irondale. 4. No warning lamps, messages or other symptoms prior to the failure. The car was driving as normal, a sudden rough idle, light came on, and the car cut off in ongoing traffic, with not warning before.
- Electrical system · Engine · Power train
I am filing a complaint regarding the recall work performed on my 2011 BMW 528i for the VANOS bolt safety recall. The recall notice stated the vehicle was unsafe to drive until repaired. I arranged towing to Jackie Cooper BMW in Edmond, Oklahoma because of this safety warning. The dealership…
I am filing a complaint regarding the recall work performed on my 2011 BMW 528i for the VANOS bolt safety recall. The recall notice stated the vehicle was unsafe to drive until repaired. I arranged towing to Jackie Cooper BMW in Edmond, Oklahoma because of this safety warning. The dealership performed the recall repair and released the vehicle back to me. Immediately after picking it up, the vehicle experienced a failure and became inoperable. The vehicle had to be towed again. This time, the dealership covered the towing cost and had the vehicle returned to my residence. Staff present at the time included a technician named Luke and the Service Drive Manager, Tayler Hawkins. Staff statements indicated that diagnostic charges would have applied if issues outside the recall were found, but no diagnostics were ultimately billed. There were also inconsistencies regarding the availability of the service manager. I am filing this complaint because the vehicle failed immediately after recall service and required towing. I am concerned that the recall work may not have been performed correctly or that the vehicle was released in a condition that was not suitable for operation. I am requesting that this incident be documented as part of the recall and safety record for this vehicle.
- Engine and engine cooling
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure.
- Engine and engine cooling · Fuel system, gasoline · Power train
The contact owns a 2011 BMW 528I. The contact stated while driving approximately 35 MPH, the check engine warning light illuminated, and the vehicle stalled. The contact pulled over, and after several attempts, the vehicle restarted. The contact was able to restart the vehicle, and the message…
The contact owns a 2011 BMW 528I. The contact stated while driving approximately 35 MPH, the check engine warning light illuminated, and the vehicle stalled. The contact pulled over, and after several attempts, the vehicle restarted. The contact was able to restart the vehicle, and the message "Drivetrain Malfunction" was displayed. The contact stated that the failure started recently and had occurred several times. Additionally, the vehicle was vibrating intermittently and lost motive power. The contact stated that occasionally the vehicle failed to accelerate above 15 MPH. The contact smelled the odor of gasoline inside the vehicle. The contact stated that the check engine warning light was illuminated. The contact had not taken the vehicle to a local dealer or independent mechanic. The vehicle was not diagnosed or repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 80,000.
- Engine and engine cooling
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Recall Campaign Number: 23V707000 (ENGINE AND ENGINE COOLING), and the vehicle was taken to a local dealer for the recall repair. The contact stated that while driving 40 MPH, the message "Drive Train Malfunction - Drive…
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Recall Campaign Number: 23V707000 (ENGINE AND ENGINE COOLING), and the vehicle was taken to a local dealer for the recall repair. The contact stated that while driving 40 MPH, the message "Drive Train Malfunction - Drive Moderately" was displayed. The vehicle was towed to the same dealer to be diagnosed. The contact was informed that faulty spark plugs had caused damage to a cylinder, and the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 123,568.
- Power train
It feels like someone is hitting me from behind when it downshifts from I believe 2nd into 1st gear. Its a hard down shift. I was told by a mechanic at Bavarian Auto in Bakersfield Ca. His name is Sal and he is the owner. I told him when I took my car in that I wanted the transmission fluid…
It feels like someone is hitting me from behind when it downshifts from I believe 2nd into 1st gear. Its a hard down shift. I was told by a mechanic at Bavarian Auto in Bakersfield Ca. His name is Sal and he is the owner. I told him when I took my car in that I wanted the transmission fluid changed. He told me it's a lifetime transmission and it never had to be changed. Now I'm pretty sure I'm having a problem with my transmission because of it needing the oil changed.
- Electrical system › Starter assembly
The contact owns a 2011 BMW 528I. The contact stated that the vehicle was difficult to start. The vehicle was taken to the dealer and the starter was replaced; however, the failure recurred. The vehicle was taken to an independent mechanic where the starter was replaced; however, the failure…
The contact owns a 2011 BMW 528I. The contact stated that the vehicle was difficult to start. The vehicle was taken to the dealer and the starter was replaced; however, the failure recurred. The vehicle was taken to an independent mechanic where the starter was replaced; however, the failure persisted. The contact stated that while stopped at a traffic light, the vehicle shut off and failed to restart. The vehicle was towed to Pep Boys to be diagnosed. The vehicle was not diagnosed or repaired. Another dealer, BMW of Tallahassee (1485 Capital Cir NW, Tallahassee, FL 32303); was notified of the failure. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 140,000.
- Latches/locks/linkages › Trunk lid › Latch · Structure › Body › Trunk lid
on February 1,2025 Pushed the trunk release at Autozone to take battery out of vehicle. And, trunk spring/release was so strong the trunk broke my back windshield again. This would be the second time I've had this happen. the first was on August9.2023. Ever since I've purchased the vehicle the trunk ring/release has been real strong. This really needs to be looked into!
- Engine and engine cooling
The contact owns a 2011 BMW 528i. The contact stated that the vehicle was repaired under NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, following the recall repair, the vehicle was stalling with the check engine warning light illuminated. The contact stated that the vehicle…
The contact owns a 2011 BMW 528i. The contact stated that the vehicle was repaired under NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, following the recall repair, the vehicle was stalling with the check engine warning light illuminated. The contact stated that the vehicle was towed back to the same dealer. The contact stated that the dealer had diagnosed the vehicle and determined that the VANOS solenoids had failed and needed to be replaced. The vehicle was not repaired. The contact related the failure of the VANOS solenoids to the recall repair of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling). The manufacturer was informed of the failure. The failure mileage was approximately 112,000.
- Engine and engine cooling
The contact owns a 2011 BMW 528I. The contact stated that while her husband was driving at or above 50 MPH on several occasions, the vehicle began shaking and running rough. The check engine warning light flashed on and off during one occasion and then remained illuminated. Additionally, on two…
The contact owns a 2011 BMW 528I. The contact stated that while her husband was driving at or above 50 MPH on several occasions, the vehicle began shaking and running rough. The check engine warning light flashed on and off during one occasion and then remained illuminated. Additionally, on two occasions while stopped at a red light and a stop sign, the accelerator pedal was depressed, and the vehicle stalled. After two failed attempts to restart the vehicle, the vehicle was restarted several hours later. The vehicle was taken to the dealer and repaired under NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling). The contact was then advised by the dealer that the vehicle would not start. The manufacturer was notified of the failure but provided no assistance. The failure mileage was unknown.
- Engine and engine cooling
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the check engine warning light was illuminated. The vehicle was taken to the…
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the check engine warning light was illuminated. The vehicle was taken to the local dealer, where the contact was made aware of an oil leak. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the failure. The failure mileage was approximately 101,147. Parts distribution disconnect.
- Engine and engine cooling
See attached document for complaint.
- Engine and engine cooling
The contact owns a 2011 BMW 528I. The contact stated while driving approximately 35 MPH, the vehicle made an abnormal sound and stalled. The check engine warning light and brake warning light repeatedly illuminated on and off. The vehicle was difficult to control, causing the contact to drive over…
The contact owns a 2011 BMW 528I. The contact stated while driving approximately 35 MPH, the vehicle made an abnormal sound and stalled. The check engine warning light and brake warning light repeatedly illuminated on and off. The vehicle was difficult to control, causing the contact to drive over a pothole, causing the rear window glass to shatter. The contact's two children were in the rear seats, and one was cut in the back of the neck with the shattered glass. No medical attention was sought. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) prior to the failure; however, the part to do the recall repair was unavailable. The contact believed that the failure was caused by the recall. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The vehicle was drivable and was driven back to the residence. The vehicle was not repaired. A dealer was not contacted. The manufacturer was not notified of the failure. The failure mileage was 170,000. VIN tool confirms parts not available.
- Engine and engine cooling
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable…
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Engine and engine cooling
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact…
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Engine · Unknown or other
Again I write about 2011 bmw 528i, the vanos bolts were recalled and when bmw was fixing them they showed a video , there was belt and metal pieces in the engine oil. Whoever had this car before me did fix the belt and other issues but they said they didn't take off the bottom of the engine pan…
Again I write about 2011 bmw 528i, the vanos bolts were recalled and when bmw was fixing them they showed a video , there was belt and metal pieces in the engine oil. Whoever had this car before me did fix the belt and other issues but they said they didn't take off the bottom of the engine pan for the oil to get out .. the vanos bolt recall when I looked it up was June 1st . I had bmw fix the missing bolts 🔩 June 7th it had to be towed there and back to my house. They said they made a decision that it did not happen because of the recall . Which it stated in the recall paperwork that it can affect the engine and to not drive it ! So as of today I have a bmw that was recalled and I do believe other recalls on this car as well had everything to do with me not having a car now because the engine misfiring and stalls and brake light and sensors are all no good. Does not add up . They refused to give a new engine because the car is worth way less than a new engine.
- Engine and engine cooling
The contact owns a 2011 BMW 528I. The contact stated while driving at an undisclosed speed, the vehicle stalled and lost motive power with the check engine warning light illuminated. The vehicle was towed to the dealer where it was diagnosed as a failure with the VANOS bolts, and the contact was…
The contact owns a 2011 BMW 528I. The contact stated while driving at an undisclosed speed, the vehicle stalled and lost motive power with the check engine warning light illuminated. The vehicle was towed to the dealer where it was diagnosed as a failure with the VANOS bolts, and the contact was informed that the VANOS bolts needed to be replaced. The vehicle was repaired but the failure persisted. The contact stated that when the vehicle was started, the engine would misfire, and the check engine warning was illuminated. The dealer was contacted, but the vehicle was not repaired. The manufacturer was made aware of the failure and referred the contact to the NHSTA Hotline for assistance. The failure mileage was approximately 103,580.
- Engine
Driving on highway car engine died no warning light nothing There is recall for engine but bmw waiting for part they are denying its over 2 months to fix recall
- Engine and engine cooling
The contact owns a 2011 BMW 528I. The contact stated that the vehicle hesitated while depressing the accelerator pedal after a complete stop. Two days later, the contact stated that the vehicle failed to start after several attempts with the check engine warning light illuminated. Due to the…
The contact owns a 2011 BMW 528I. The contact stated that the vehicle hesitated while depressing the accelerator pedal after a complete stop. Two days later, the contact stated that the vehicle failed to start after several attempts with the check engine warning light illuminated. Due to the failure, the vehicle was towed to an independent mechanic where the contact was informed that the VANOS bolts had fractured and entered the oil pan. The contact was then informed that the vehicle was included in NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The failure mileage was 151,597. VIN tool confirms parts not available.
- Engine
I had my car repaired under a recall for VANOS bolts shearing/breaking off causing the engine to stop running. Issue has returned and car is unsafe to drive.
- Engine and engine cooling
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
- Engine and engine cooling
The contact owns a 2011 BMW 528I. The contact stated that while her son was driving at an undisclosed speed, the check engine warning light illuminated. The contact later received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair…
The contact owns a 2011 BMW 528I. The contact stated that while her son was driving at an undisclosed speed, the check engine warning light illuminated. The contact later received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The vehicle was taken to the dealer, and the contact was informed that parts were not yet available. The contact stated that after leaving the dealer, the contact's son was driving 70 MPH, and the vehicle inadvertently decelerated to 20 MPH. The vehicle decelerated again and failed to exceed 5 MPH. The vehicle then stalled. The check engine and traction control warning lights were illuminated. The vehicle was towed to the residence. The vehicle was able to be restarted and stalled while the contact was driving. The check engine warning light was illuminated. The "Engine Shut Down Immediately" and "Drivetrain Malfunction" messages were displayed. The vehicle was towed to the dealer, where it was diagnosed that the radiator hose had detached. The radiator hose was replaced; however, the failure recurred. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 194,460. VIN tool confirms parts not available.
- Engine and engine cooling
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
- Engine and engine cooling
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Engine and engine cooling
The contact owns a 2011 BMW 528i. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2011 BMW 528i. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249437The basic conditions for initializing the power windows are not met.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10247567Engine will crank but not start. There is no communication with the integrated fuel module (TFE) whendiagnosing with ISTA. The following two fault codes will be stored in the DME: 032B43 - Low fuel pressure system, electric fuel pump: pressure value too low CDA594 - Message (- 0x33E) missing, receiver DME, transmitter TFE
- 10245422Customers may state that the alarm system (DWA) is not active after locking their unoccupied vehicle. Depending on the vehicles equipment and settings, no acoustic or optical confirmation (folding the mirrors/blinking confirmation) is noticeable. Additionally, the red anti-theft alarm LED in the interior mirror does not briefly flash every 2 seconds, indicating the alarm is armed.
- 10239605The Dynamic Stability Control (DSC) warning light comes on while driving. The following DSC fault codes for the wheel speed sensors are stored: 480712 and/or 480715 and/or 480718 and/or 48071B They cannot be cleared, even though the wheel speed sensors work correctly and no problem can be found with the wiring harness.
- 10238090After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.
- 10230717For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle's Fuel Injectors to 10 years/120,000 miles as determined by the vehicle's original in-service date.
- 10230716With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered into a nationwide settlement with the plaintiffs in the following class action: Isley, et al. v. Bayerische Motoren Werke Aktiengesellschaft and BMW of North America, LLC.
- 10227568According to the customer, the airbag warning light was on, but it may not be illuminated when the vehicle arrives in the workshop. 1. ACSM fault code "930A60 - Seat occupancy detection, front passenger; malfunction" is stored. The fault may or may not currently be present. Or 2. ACSM fault code "930A1C - Front passenger seat occupancy detection transmitting fault(moisture)" is stored. The fault may or may not currently be present.
- 10215746Component specific limited warranty extension. For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle Nitrogen Oxide (NOx) Sensor(s) to: 10 years/120,000 miles as determined by the vehicle original in-service date.
- 10215024The engine?s intake charge-air duct limited warranty extension to 10 years/120,000 miles applies to ?eligible USspecification
- 10214990The Headunit High (HU-H), also called NBT, began replacing the Car Information Computer (CIC) on certain MY2013 vehicles with option 609 (as of 7/2012 production). This uses map North America NEXT. The Headunit High 2 (HU-H2), also called NBT-EVO, superseded the NBT HU and was introduced in 3/2014. This uses map North America EVO. The Headunit High 4 (HU-H4, also called MGU21) superseded the MGU starting with certain MY2021 vehicles with option code 6U3 Live Cockpit Professional. This uses map North America JOY. The ENTRY Media/Navigation (HU-B) is the low line business version of the navigation system and was introduced in 3/2014. This uses map North America ROUTE. The ENTRY NAV EVO (HU-B2) replaced Entry Media/Navigation as the low-line business version and was introduced in certain MY2018 vehicles. This uses map North America WAY.
- 10211851This bulletin outlines the procedure for checking the engine timing chains for wear, and should be completed in conjunction with SI B11 06 14, "N63 Customer Care Package." The N63CCP and N63 Engine Check the Timing Chain are NOT mandatory Technical Campaigns or Recalls. They should be completed only based on parts availability, workshop capacity, and the customer's schedule.
- 10203336Inform the customer during a consultation that the M Compound (standard equipment) and M Carbon Ceramic (optional) brakes are high-performance brake systems which are designed for sporty, dynamic driving styles. As a side effect of the highest possible brake performance, customers are likely to hear noises due to the extremely resilient materials. In the same conversation, inform the customer that his/her braking performance can help ensure that the noises do not occur or disappear quickly.
- 10201141Inform the customer during a consultation that the M Compound (standard equipment) and M Carbon Ceramic (optional) brakes are high-performance brake systems which are designed for sporty, dynamic driving styles. As a side effect of the highest possible brake performance, customers are likely to hear noises due to the extremely resilient materials In the same conversation, inform the customer that his/her braking performance can help ensure that the noises do not occur or disappear quickly.
- 10200487TELEMATICS UNIT DEACTIVATION DUE TO 3G CELLULAR TECHNOLOGY DISCONTINUATION: The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule) can no longer be supported by the cellular network provider starting February 2022.
- 10200226Distribution of the following tool will be through the Automatic Tool Shipment Program
- 10194296Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.
- 10188954COLLECTION OF DRIVER'S AND PASSENGER'S SIDE AIR BAGS: BMW intends to perform evaluations and analyses on these side air bags.
- 10186215INCORRECT TORQUE SPECIFICATION FOR THE HIGH-PRESSURE PUMP IN ISTA: The current version of ISTA states the incorrect tightening torque for the High-Pressure pump M6 mounting bolts to the cylinder head cover. The correct tightening torque is only 12 Nm for the M6 bolts.
- 10184575TICKING NOISE FROM THE FRONT AXLE WHEN CORNERING: The customer may complain of a metallic ticking noise from the front axle, when cornering, maneuvering, parking or pulling away from a parking space.
- 10179812CRACKING NOISES FROM THE FRONTAXLE AREA WHILE TURNING THE WHEELS, WHEN STATION: Cracking noises are heard from the front axle area while maneuvering at low speeds (e.g., parking lot maneuvers) or when turning the steering wheel while stationary.
- 10179009NAVIGATION SYSTEM - REPORTING MISSING OR INCORRECT ROADMAP DATA: Do not replace parts and do not program the vehicle. Roads can change by up to 15% every year. To ensure the best navigation experience, we do everything in our power to create the best maps. Your reports help us to detect changes in your area and keep future versions of our maps as accurate as possible. Therefore, a road map error or missing data must be reported directly to the map supplier.
- 10178996TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: Ticking noise coming from front wheel while cornering without brakes applied, noticeable at low speeds. The vehicle must be moving.
- 10174320CONNECTEDDRIVE/BMW ASSIST SYSTEM DIAGNOSIS INFORMATION: This Service Information Bulletin (Revision 7) replaces SI B84 02 14 dated May 2019. ConnectedDrive/BMW Assist features are partially or completely inoperative. This Service Information Bulletin: Is being published because vehicles are down for an extended period of time when researching system failures with ConnectedDrive or BMW Assist. Will assist you both in identifying the issue and providing technical support. CAUSE Not enough information is available for BMW NA engineers to assist the technician in diagnosing the root cause.
- 10174032AUTOMATED ACTIVATION OF NAVIGATION SYSTEM DURING PDI/QC1: This Service Information Bulletin (Revision 2) replaces SI B65 22 14 dated October 2015. The INITIAL NAV enabling code no longer needs to be pre-ordered through the Parts department! When the vehicle is connected to the diagnostic system ISTA to perform PDI/QC1 the step to activate the navigation system (part of Delete Transport Mode) will automatically request the INITIAL NAV enabling code (VIN-specific) without pre-ordering the enabling code. This enabling code will be automatically delivered through ISTA and it then activates the navigation system.
- 10174015TAILGATE UNINTENTIONALLY OPENS: This Service Information Bulletin (Revision 4) replaces SI B51 30 16 dated March 2018. Trunk/tailgate may open when vehicle is locked Trunk/tailgate may open while the vehicle is in motion usually after stopping such as a traffic light etc. Vehicle key trunk/tailgate button may be accidentally pressed thus opening the tailgate.
- 10174009TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: This Service Information Bulletin (Revision 3) replaces SI B34 05 17 dated September 2017. Ticking noise coming from front wheel while cornering without brakes applied noticeable at low speeds. The vehicle must be moving. See attached video V34 01 20 Note: For a similar noise heard when parking with the brakes applied refer to SIB 31 01 12. Microscopic movement of the contact interface between the inner brake disc and the wheel bearing flange on vehicles equipped with lightweight brake discs.
- 10172479LIMITED WARRANTY EXTENSIONTO 10 YEARS/120000 MILES: This Service Information Bulletin replaces SI B01 05 18 dated July 2019. Engine starts poorly (hard starting) rough idle and misfires. The Service Engine Soon (MIL) lamp is on.
- 10169460HELPFUL INFORMATION FOR CUSTOMER DISCUSSIONS REGARDING MOTORSPORT VEHICLE BRAKES: INFORMATION Inform the customer during a consultation that the M Compound (standard equipment) and M Carbon Ceramic (optional) brakes are high-performance brake systems which are designed for sporty dynamic driving styles. As a side effect of the highest possible brake performance customers are likely to hear noises due to the extremely resilient materials.
- 10166234NOISE FROM FRONT AREA: There is a hissing or wind noise present from the front area of the vehicle at speeds above 60 mph.
- 10165266SECURITY IMPROVEMENTS FOR CONNECTEDDRIVE. Security patches for non-safety critical vulnerabilities in BMW head units Entry Nav Entry Media NBT and NBT EVO.
- 10163995DIAGNOSTIC HINT: CATALYTIC CONVERTER INSPECTION AFTER LOSS OF CRANKSHAFT SIGNAL. In certain situations when the crankshaft position signal is lost while driving the malfunction indicator lamp (MIL) and an engine malfunction check control message (CCM #29) may be displayed. The engine may run roughly or with reduced power.
- 10163994The crankcase ventilation hoses may become brittle and break when they come in contact with hot engine components. One or more of the crankcase ventilation hoses are not FPM (fluoroelastomer) rubber material. The FPM rubber material is engine heat resistant. Or The plastic corrugated hoses are not fitted with the self-locking spacers. The self-locking spacers maintain an air gap between the hoses and the hot engine components.
- 10163033NEW REPLACEMENT FUEL TANK INTERNAL FUEL LINE CONNECTION. INFORMATION WARRANTY INFORMATION Not applicable. This Service Information bulletin provides technical and repair procedure-related information.
- 10163027ENGINE VIBRATIONS OR NOISE This Service Information bulletin replaces SI B11 01 19 dated February 2019.
- 10163026N63 ENGINE: OIL CONSUMPTION CLASS ACTION SETTLEMENT DIAGNOSIS AND REPAIR PROCEDURES. While engine oil consumption may create a customer inconvenience in the short term it should not cause any drivability problems that would prevent normal day-to-day operational use of the vehicle.
- 10162458Headunit High: Vehicle Position Is Incorrect on the Navigation Map. The vehicle position on the navigation map is incorrect. With route guidance active, the vehicle is displayed: * In an incorrect location Or * Outside the planned route. The navigation system integrated in the Headunit High (HU-H) is not calibrated correctly.
- 10162457Radio and Air Conditioning Functions Inoperative, When Vehicle is Moving. All audio and heating/air conditioning functions cannot be controlled when the vehicle is moving. After the vehicle is turned off and has entered sleep mode (after approximately 30 minutes), the system operates normally. CAUSE: Software error in the audio and air conditioning control panel.
- 10162435Lane Change Warning Lamps on Side View Mirrors Are Too Dark. The lane change warning lamps (small and triangle-shaped) on the exterior door mirrors are too dark. This may occur when driving from light to dark conditions, such as: * Entering a tunnel * At twilight CAUSE: RLSS (Rain Light Solar Sensor) hardware error.
Every BMW 528I model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.