2021 BMW M340I
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2021 BMW M340I. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
6 recalls name the 2021 BMW M340I. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2019-2022 330i, 330i xDrive, M340i, 2022 430i Coupe, 2021-2022 430i, M440i Convertible, and 2020-2022 228i xDrive Gran Coupe vehicles. The receiver audio module control unit software may fail to properly generate audible seat belt warnings to the driver to fasten their seat belt. As such, these vehicles…
An audible chime that does not properly alert the driver to fasten their seat belt increases the risk of injury in a crash.
Dealers will update the receiver audio module software, free of charge. Owner notification letters were mailed October 12, 2023. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2019-2021 330i, 330i xDrive, M340i xDrive, 2020-2021 X3 sDrive30i, X3 xDrive30i, X3 M40i, X3M, 2021 X3 xDrive30e, X4 xDrive30i, and X4M vehicles. The seat frame may not have been welded properly to the seat rails.
An improperly welded seat frame may not properly restrain the occupant during a crash, increasing the risk of injury.
Dealers will replace the seat frame and back rest, free of charge. Owner notification letters were mailed May 22, 2023. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2021 2 Series (230i, 230i xDrive, M240i, M240i xDrive), 330e, 330e Xdrive, 4 Series Coupe (430i, 430i xDrive, M440i xDrive) M4 Coupe, M4 Competition Coupe, BMW 4 Series Convertible (430i, M440i), BMW X1 sDrive28i, xDrive28i, 2 Series Gran Coupe (228i, 228i xDrive, M235i xDrive), M2 Competition Coupe…
During a crash, a seat belt retractor that does not function as intended increases the risk of injury.
Dealers will inspect the seat belt retractors (including the seat belts) and, if necessary, replace the retractors, free of charge. Owner notification letters were mailed on September 3, 2021. Owners may contact BMW customer service at 1-800-525-7417; 1-866-825-1525 (MINI); 1-877-877-3735 (Rolls Royce); and 1-888-270-9371 (Toyota).
BMW of North America, LLC (BMW) is recalling certain 2021 330i, 330i xDrive, M340i, M3, and 330e xDrive vehicles. The bolt securing the seat belt assembly to the frame was not tightened to specification.
An improperly installed seat belt assembly may not restrain an occupant as expected, increasing the risk of injury.
BMW will notify owners, and dealers will inspect the front seat belt buckle assembly connection and, if necessary, replace it, free of charge. Owner notification letters were mailed on June 25, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2019-2021 X3 sDrive30i, X3 xDrive30i, X3 M40i, X3M, X4 xDrive30i, X4 M40i, M550i, X4M, X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5M, X5 M50i, X7 xDrive40i, X7 xDrive50i, X7 M50i, Alpina XB7, 330i, 330i xDrive, M340i, M340i xDrive, and 8 Series Coupe, Convertible and Grand Coupe, 840i, 840i xDrive, M850i…
If the driver relies on only the rearview camera image, the missing or reduced rearview image view can increase the risk of a crash or injury.
BMW will notify owners, and dealers will inspect the rearview camera software and update it if necessary, free of charge. The recall began April 16, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2021 M340i xDrive, M440i xDrive Coupe, 530i, 530i xDrive, 540i, 540i xDrive, 740Li, 740Li xDrive, 840i Gran Coupe, 840i xDrive Gran Coupe, X5 sDrive40i, X5 xDrive40i, X6 sDrive40i, X6 xDrive40i, and X7 xDrive40i vehicles. The connection between the 48-Volt battery and the starter-generator may not have…
Increased electrical resistance can increase the risk of a fire.
BMW will notify owners, and dealers will inspect the connection between the 48-Volt battery and the starter-generator assembly, replacing it if necessary, free of charge. The recall is expected to begin April 12, 2021. Owners may contact BMW customer service at 1-800-525-7417.
I have been smelling a burning odor in the vehicle for almost a year which the dealership and an independent shop had not been able to diagnose. The car was recently throwing Drivetrain Error codes which prompted a visit to the dealership. They found that the 48v battery and negative cable are burnt and quoted $5680 to replace the battery and cables. After investigating I found that there were recalls for this issue on other BMWs, including the same year and model of my vehicle, but my VIN is not pulling up a recall. The issue is a fire risk and a very expensive repair that should be covered by the manufacturer due to a known defect.
The BMW B58TU oil pump thermoplastic component issue that can cause catastrophic failure to the engine. The the gen 1 oil pump was made from plastic and after issues were discovered, they switched to metal oil pumps. However this known issue is something that BMW has not addressed in the models 2019-2021 that came with the inferior oil pump.
I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely. In many cases, drivers receive little or no actionable warning prior to engine damage or vehicle disablement. Reported precursor symptoms include inability to electronically measure engine oil level, abnormal oil pressure behavior, or sudden drivetrain malfunction warnings. Failures may rapidly progress to engine shutdown or severe mechanical damage caused by oil starvation. Loss of lubrication can cause the vehicle to become disabled without warning while driving or shortly after startup. This creates a safety hazard, particularly when vehicles become immobilized in active traffic or during winter conditions the cold is when they fail the most, where occupants may be exposed to freezing temperatures while awaiting assistance. Replacement of the oil pump requires extensive disassembly of the vehicle and repairs commonly exceed $6,000–$8,000 for just the pump, assuming the motor is unharmed. Failures have been reported across multiple production years, and affected vehicle population boundaries remain unclear. Because this condition can result in sudden vehicle disablement without adequate warning especially in the cold, I believe this issue warrants investigation as a potential safety-related defect.
Here’s a strong version that sounds frustrated but still credible and harder to dismiss: I’ve owned many vehicles over the years, and this BMW has been, without question, the most problematic car I’ve ever had. The list of issues has been absurd for a vehicle in this price range and from a brand that markets itself as a premium luxury manufacturer. The sunroof failed, I’ve had multiple tire blowouts under normal driving conditions, the drive bar/suspension was bent from what should have been a routine road bump, the engine oil housing/component failed, and now I’m dealing with coolant system and drivetrain problems as well. At this point, it feels like one major issue after another. I expected quality, reliability, and engineering excellence from BMW, but my experience has been the complete opposite. Instead, ownership has been stressful, expensive, and incredibly disappointing. A luxury vehicle should not have this many significant failures in such a short span of ownership. Between the repair costs, downtime, and constant concern over what will fail next, this car has completely destroyed my confidence in the BMW brand. I am documenting these issues formally because this ownership experience has been unacceptable.
I am reporting a safety concern with BMW vehicles equipped with the B58 Technical Update (B58TU) engine, primarily in 2019–2021 model years. These vehicles use a variable-displacement oil pump containing an internal thermoplastic adjusting component that regulates oil pressure. This plastic part is prone to fracturing, leading to sudden loss or instability of engine oil pressure. Failures most commonly occur during cold starts in low ambient temperatures. When the component breaks, oil pressure regulation fails with little or no warning. Drivers often experience precursor symptoms such as inability to electronically read oil level, erratic oil pressure, or sudden drivetrain warnings. The issue can rapidly progress to engine shutdown or severe damage from oil starvation. This creates a serious safety hazard, as the vehicle can become disabled without warning while driving or shortly after startup — particularly dangerous in traffic or winter conditions when failures are most frequent, potentially stranding occupants in freezing temperatures. Oil pump replacement requires extensive disassembly and typically costs $6,000–$8,000 for the pump alone, assuming no further engine damage. Owners cannot reliably determine if their vehicle still has the original thermoplastic pump. VIN-based parts lookups now display the updated metal-component part number even when no replacement has occurred. BMW has also removed the original plastic part number from dealer systems, eliminating transparency. This issue affects multiple production years and continues to impact vehicles in the field
I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely. In many cases, drivers receive little or no actionable warning prior to engine damage or vehicle disablement. Reported precursor symptoms include inability to electronically measure engine oil level, abnormal oil pressure behavior, or sudden drivetrain malfunction warnings. Failures may rapidly progress to engine shutdown or severe mechanical damage caused by oil starvation. Loss of lubrication can cause the vehicle to become disabled without warning while driving or shortly after startup. This creates a safety hazard, particularly when vehicles become immobilized in active traffic or during winter conditions the cold is when they fail the most, where occupants may be exposed to freezing temperatures while awaiting assistance. As I waited for 4hr in -15c. Replacement of the oil pump requires extensive disassembly of the vehicle and repairs costed $8349 for just the pump, assuming the motor is unharmed. Owners are currently unable to determine whether their vehicles contain the original thermoplastic oil pump design or a later revised version utilizing metal internal components, as VIN-based parts information now identifies updated components in the car even when no replacement has occurred and the old components are actually in the car. Also, BMW has actively removed the plastic part number out of all dealer networks as well.
Started as low creaking noise coming from front left wheel. Slow speeds, over small bumps. Over time (one month), creaking noises became louder and more frequent. At that time, steering was starting to feel stiff when turning to the left. Taken to 2 BMW dealerships who said it was just a noise and that both tie rods would have to be replaced. Upon further investigation, these noises and handling are a result of the torque being too tight at the factory upon manufacturer.
While driving through an intersection and making a left turn, a failure of the engine water pump pulley caused the pulley to break apart. This led to damage to the coolant line and tensioner, sudden coolant loss, and the serpentine belt slipping off. The failure occurred mid-turn, causing the vehicle to skid and momentarily lose steering control. I narrowly avoided a collision with an oncoming vehicle that was stopped at a red light. The vehicle was towed to an independent repair shop, where mechanics confirmed that the water pump pulley had failed and caused the resulting damage. The vehicle is just over 4 years old and has approximately 58,000 miles. This type of failure—especially in a well-maintained vehicle with all scheduled maintenance completed on time—is unexpected and presents a serious safety concern.
At approximately 20,000 miles, vehicle indicated excessively low oil. The dealer indicated oil level was excessively low but did not identify the problem,. The vehicle was filled and returned to owner. Within 1000 miles, the incident occurred again. Dealer replaced replaced the valve cover claiming that was the issue. Now within +/- 1000 miles, the oil level is again excessively low. I happen to have another identical BMW of the same year and same mileage having exactly the same problem (filing separate complaint).
At approximately 20,000 miles, vehicle indicated excessively low oil. The dealer indicated oil level was excessively low but did not identify the problem,. The vehicle was filled and returned to owner. Within 1000 miles, the incident occurred again. Dealer replaced replaced the valve cover claiming that was the issue. Now within +/- 1000 miles, the oil level is again excessively low. I happen to have another identical BMW of the same year and same mileage having exactly the same problem (filing separate complaint).
The contact owns a 2021 BMW M340I. The contact stated while driving various speeds, the vehicle independently shifted from reverse(R) to drive(D) to park(P). The contact stated that while driving approximately 10 MPH and attempting to stop the vehicle, the brake pedal was depressed and went to the floorboard. The contact stated that the brake failed to operate as designed. The vehicle was towed to a dealer who diagnosed that the vacuum pump needed to be replaced. The vehicle was repaired. The contact stated that an unknown transmission repair was performed. The manufacturer was made aware of the failure. The approximate failure mileage was 4,000.
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.